Development of hydrophobic,mechanically reliable,and glow-in-the-dark glue using Arabic gum

A smart nanocomposite adhesive was created to facilitate a simple production of long-persistent photoluminescent and hydrophobic commercial products. Even after being left in the dark for up to 90 min, the created photoluminescent adhesive agent continued to generate light. A surface-specific nanocomposite adhesive agent consisting of lanthanide-activated strontium aluminate (LSA) nanoparticles (NPs; 5–14 nm) immobilized in the environmentally friendly Arabic gum (AG) was developed. A light-transmitting nanocomposite adhesive agent was manufactured by dispersing LSA nanoparticles evenly across the AG matrix without agglomeration. An excitation peak at 365 nm and an emission wavelength at 519 nm were observed for the prepared adhesives at different concentrations of LSA NPs. The emission spectra showed either fluorescence or afterglow phosphorescence, depending on the LSA ratio. The photochromic transition from colourless to green beneath an ultraviolet (UV) lamp and greenish yellow in a dark room was tracked. The LSA NPs in the Arabic gum matrix imparted enhanced hydrophobicity and scratch resistance to the LSA@AG nanocomposite. The LSA@AG nanocomposite demonstrated excellent durability and photostability. This study confirmed that the mass production of smart adhesives for applications such as smart windows, smart packaging, and safety directional signs in buildings is possible.     

Photoluminescent polymer-based smart window reinforced with electrospun glass nanofibres

Poly(vinyl chloride) (PVC) was reinforced with electrospun glass nanofibres (EGN) to develop photochromic and afterglow materials such as smart windows and anti-counterfeiting prints. A colourless electrospun glass nanofibres@poly(vinyl chloride) (EGN@PVC) sheet was prepared by physical integration of lanthanide-doped aluminate nanoparticles (LANP). The low concentrations of LANP in the photochromic and photoluminescent EGN@PVC hybrids displayed fluorescence emission with instant reversibility. EGN@PVC with the highest phosphor concentrations showed persistent phosphorescence emission with slow reversibility. Based on the results of the Commission Internationale de l'éclairage Laboratory and luminescence spectroscopy, the translucent EGN@PVC samples became green in the presence of ultraviolet illumination and greenish-yellow in the absence of light. According to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses, the morphological study of EGN and LANP showed diameters of 75–95 and 11–19 nm, respectively. The morphology of the EGN@PVC substrates was studied using SEM, X-ray fluorescence, and energy-dispersive X-ray spectroscopy. The mechanical characteristics of PVC were enhanced by reinforcement with EGN as a roughening agent. When comparing the scratching resistance of LANP-free substrate to photoluminescent EGN@PVC substrates, it was observed that the latter was much superior. The photoluminescence spectra were reported to have an emission peak at 519 nm when excited at 365 nm. These findings demonstrated that the luminous transparent EGN@PVC composites had improved superhydrophobic and UV-blocking characteristics.     

Immobilization of lanthanide doped aluminate phosphor onto recycled polyester toward the development of long-persistent photoluminescence smart window

Smart window can be defined as switchable material whose light transmission is altered upon exposure to light, voltage, or heat. However, smart windows are usually produced from expensive and breakable glass materials. Herein, transparent smart window with long-persistent phosphorescence, high optical transmittance, ultraviolet (UV) protection, rigid, high photostability and durability, an d superhydrophobicity was developed from recycled polyester (PET). Recycled polyester waste (RBW) was simply immobilized with different ratios of lanthanide-doped aluminate nanoparticles (LdAN) to provide a long-persistent phosphorescent polyester smart window (LdAN@PET) with an abili ty to persist emitting light for extended time periods. The solid-state high temperature technique was used to prepare lanthanide-doped aluminate (LdA) micro-scale powder. Then, the top-down technique was applied to afford the corresponding LdAN. Recycled shredded recycled polyester bottles were charged into a hot bath to provide a clear plastic shred bulk, which was then well-mixed with LdAN and drop-casted to provide long-persistent luminescent smart window. In order to improve the phosphor dispersion in the PET bulk, LdAN was synthesized in the nanoparticle form which was characterized utilizing transmission electron microscopy (TEM). For better preparation of translucent smart window of long-persistent phosphorescent polyester, LdAN must be homogeneously dispersed in the PET matrix without agglomeration. The morphology and chemical composition were studied by Fourier-transform infrared (FTIR) spectra), X-ray fluorescence (XRF) analysis, scanning electron microscopy (SEM), and energy-dispersion X-ray spectroscopy (EDX). In addition, spectral profiles of excitation and emission, and decay and lifetime were used to better understand the photoluminescence properties. The hardness properties were also investigated. The developed phosphorescent transparent polyester smart window demonstrated a color switch to intense green underneath UV irradiation and greenish-yellow under darkness as verified by CIELab color parameters. The afterglow polyester smart window showed an absorption wavelength at 365 nm and two phosphorescence intensities at 442 and 512 nm. An enhanced UV protection, photostability and hydrophobic activity were detected. The luminescent polyester substrates with lower LdAN ratios demonstrated rapid and reversible fluorescent photochromic activity beneath the UV light. The luminescent polyester substrates with higher LdAN contents displayed long-persistent phosphorescence afterglow. The current strategy can be simply applied for the production of smart windows, low thickness anti-counterfeiting films and warning signs.     

Preparation of transparent photoluminescence smart window by integration of rare-earth aluminate nanoparticles into recycled polyethylene waste

Novel photoluminescent nanocomposite sheets were prepared for simple commercial manufacturing of transparent and luminous photochromic smart windows. A simple physical integration of lanthanide-doped strontium aluminium oxide (LdSAO) nanoparticles into recycled polyethylene (PE) waste produced a smart nanocomposite with persistent phosphorescence and photochromic properties. Because the nanoparticle form of LdSAO is important for developing transparent materials, LdSAO nanoparticles were well dispersed in the PE matrix. Both the morphologies and chemical compositions of the LdSAO nanoparticles and LdSAO-containing luminescent PE sheets were investigated. Both LdSAO-free and photoluminescent PE sheets were colourless in normal daylight. However the LdSAO-containing PE luminescent samples only exhibited a brilliant green colour under ultraviolet (UV) light and a greenish-yellow colour in the dark as verified by Commission Internationale de l'éclairage laboratory parameters. Both absorbance and emission bands were monitored at 377 and 436/517 nm, respectively. The LdSAO-containing PE luminescent sheets were compared with the LdSAO-free sample using both photoluminescence spectroscopy and for their mechanical properties and were found to have improved scratch resistance, UV protection, and superhydrophobic activity. Due to the added LdSAO, photoluminescence, decay, and lifetime spectral tests confirmed its photochromic fluorescence and long-lasting phosphorescence characteristics. The PE@LdSAO nanocomposite sheets displayed UV protection, photostability, hydrophobicity, and excellent durability compared with the blank LdSAO-free PE sheet.     

Simple preparation of novel photochromic polyvinyl alcohol/carboxymethyl cellulose security barcode incorporated with lanthanide-doped aluminate for anticounterfeiting applications

Forgery and low-quality products pose a danger to society. Therefore, there are increasing demands for the production of easy-to-recognize and difficult-to-copy anticounterfeiting materials. Products with smart photochromic and fluorescence properties can change colour and emission spectra responding to a light source. In this context, we devised a straightforward preparation of a luminescent polyvinyl alcohol/carboxymethyl cellulose (PVA/CMC) nanocomposite to function as a transparent labelling film. The lanthanide-doped aluminate (LdA) was prepared in the nanoparticle form to indicate diameters of 35–115 nm. Different ratios of the LdA were physically dispersed in the PVA/CMC nanocomposite label film to provide photochromic, ultraviolet protection, antimicrobial activity, and hydrophobic properties. Fluorescence peaks were detected at 365 and 519 nm to indicate a colour change to green. As a result of increasing the phosphor ratio, improved superhydrophobic activity was achieved as the contact angle was increased from 126.1° to 146.0° without affecting the film's original physical and mechanical properties. Both ultraviolet (UV) light protection and antibacterial activity were also investigated. The films showed a quick and reversible photochromic response without fatigue. The current strategy reported the development of a photochromic smart label that is transparent, cost effective, and flexible. As a result, numerous anticounterfeiting products can benefit from the current label for a better market. LdA-loaded PVA/CMC films demonstrated antibacterial activity between poor, good, very good, and outstanding as the percentage of LdA in the film matrix increased. The current film can be applied as a transparent photochromic security barcode for anticounterfeiting applications and smart packaging.     

Electrospinning of poly(ethylene oxide)/glass hybrid nanofibres for anticounterfeiting encoding

The use of photochromism to increase the credibility of consumer goods has shown great promise. To provide mechanically dependable anticounterfeiting nanofibres, it has also been critical to improve the engineering processes of authentication patterns. Mechanically robust and photoluminescent electrospun poly(ethylene oxide)/glass (PGLS) nanofibres (150–350 nm) immobilized with nanoparticles of lanthanide-doped aluminate (NLA; 8–15 nm) were developed using electrospinning technology for anticounterfeiting purposes. The provided nanofibrous membranes changed colour from transparent to green when irradiated with ultraviolet light. By delivering NLA with homogeneous distribution without aggregations, we were able to keep the nanofibrous membrane transparent. When excited at 365 nm, NLA@PGLS nanofibres showed an emission intensity at 517 nm. The hydrophobicity of NLA@PGLS nanofibres improved by raising the pigment concentration as the contact angle was increased from 146.4° to 160.3°. After being triggered by ultraviolet light, NLA@PGLS showed quick and reversible photochromism without fatigue. It was shown that the suggested method can be applied to reliably produce various anticounterfeiting materials.     

Blue emitting ZnO nanostructures grown through cellulose bio‐templates

This paper presents a green and cost‐effective recipe for the synthesis of blue‐emitting ZnO nanoparticles (NPs) using cellulose bio‐templates. Azadirachta indica (neem) leaf extract prepared in different solvents were used as biological templates to produce nanostructures of wurtzite ZnO with a particle size ~12–36 nm. A cellulose‐driven capping mechanism is used to describe the morphology of ZnO NPs. The scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), Fourier transform infra‐red (FTIR) and photoluminescence (PL) studies showed that solvents affect the growth process and the capping mechanism of bio‐template severely. Structural changes in ZnO NPs were evident with variation in pH, dielectric constants (DC) and boiling points (BP) of solvents. Furthermore, an energy band model is proposed to explain the origin of the blue emission in the as‐obtained ZnO NPs. PL excitation studies and the theoretical enthalpy values of individual defects were used to establish the association between the interstitial‐zinc‐related defect levels and the blue emission. Copyright © 2015 John Wiley & Sons, Ltd.     

Multiple functional hyperbranched poly(amido amine) nanoparticles: synthesis and application in cell imaging

The hyperbranched poly(amido amine) nanoparticles (HPAMAM NPs) with multiple functions, such as biodegradability, autofluorescence, and specific affinity, were successfully prepared by Michael addition dispersion polymerization of CBA, AEPZ, and N-galactosamine hydrochloride (or N-glucosamine hydrochloride) in a mixture of methanol/water. The resultant NPs displayed strong photoluminescence, high photostability, broad absorption, and emission (from 430 to 620 nm) spectra. The fluorescence from HPAMAM NPs may be attributed to the tertiary amine chromophore. The incubation results of the liver cancer cells, HepG2, with the NPs showed that the NPs are nontoxic and can be recognized by asialoglycoprotein receptors on the surface of HepG2 and then can be internalized. Therefore, they have potential applications in bioimaging and drug or gene delivery.     

Formulation, characterization, and in vitro evaluation of quantum dots loaded in poly(lactide)-vitamin E TPGS nanoparticles for cellular and molecular imaging

We developed a novel system of poly(lactide acid)-d-alpha-tocopheryl polyethylene glycol 1000 succinate (PLA-TPGS) nanoparticles (NPs) for quantum dots (QDs) formulation to improve imaging effects and reduce side effects as well as to promote a sustainable imaging. The QDs-loaded PLA-TPGS NPs were prepared by a modified solvent extraction/evaporation method, which were then characterized by laser light scattering (LLS) for size and size distribution; field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and transmission electron microscope (TEM) for surface morphology. Surface chemistry of the QDs-loaded PLA-TPGS NPs was analyzed by X-ray photoelectron microscopy (XPS) and Fourier transform infra-red spectroscopy (FTIR). Encapsulation efficiency of the QDs in the polymeric nanoparticles was measured by inductively coupled plasma optical emission spectrometry (ICP-OES). The photostability of the QDs formulated in the PLA-TPGS nanoparticles was investigated as changes in the florescence intensity versus the irradiation time. Confocal laser scanning microscopy (CLSM) was used to image the cellular uptake of the QDs-loaded NPs by MCF-7 cells. Methylthiazolyldiphenyl-tetrazolium (MTT) assay was employed to assess the viability of MCF-7 cells incubated with the QDs formulated by the PLA-TPGS NPs versus the mercaptoacetic acid (MAA)-coated QDs. It was found that the QDs formulated in the PLA-TPGS NPs can result in higher fluorescence intensity and higher photostability than the bare QDs as well as lower cytotoxicity than the MAA-coated QDs.     

UV light‐tunable fluorescent inks and polymer hydrogel films based on carbon nanodots and lanthanide for enhancing anti‐counterfeiting

Novel water‐soluble green fluorescent carbon nanodots (CNs) using methacrylic acid and m‐phenylenediamine as precursors were first synthesized using a one‐pot hydrothermal method. Red fluorescent lanthanide complexes were prepared using lanthanide ion Eu³⁺ and pyridine‐2,6‐dicarboxylic acid. The optical properties of CNs were characterized using ultraviolet visible (UV) spectra and fluorescence spectra, microscopic morphology was characterized using transmission electron microscopy (TEM) and dynamic light scattering (DLS), and the elemental composition was characterized using Fourier transform‐infrared spectroscopy (FT‐IR) and X‐ray photoelectron spectra (XPS). The fluorescence spectra of the lanthanide complexes were also measured. A simple strategy was developed to prepare UV light‐tunable fluorescent inks and polymer hydrogels films based on CNs and lanthanide complexes. The fluorescent inks and polymer hydrogels films could be repeatedly switched between green and red fluorescence. The change of color depended on luminescence of the CNs and the lanthanide complexes under 254 and 365 nm UV light, respectively. The UV light‐tunable fluorescent inks and polymer hydrogels films could enhance its anti‐counterfeiting function for data and information.     

Efficient approach to design stable water-dispersible nanoparticles of hydrophobic cellulose esters

Commercially prepared cellulose acetate, cellulose acetate propionate, -butyrate, and -phthalate as well as cellulose acetates prepared in the laboratory scale with varying degree of substitution (DS) self-assemble into regular nanoparticles, ranging in size from 86 to 368 nm, by using two different techniques of nanoprecipitation. Dialysis of polymers dissolved in N,N-dimethylacetamide results in the formation of regular nanospheres whereas the preparation in acetone by successive adding of water leads to bean-shaped particles in the nanoscale. One criterion for nanoprecipitation is the existence of dilute polymer solutions. Furthermore, the formation of nanoparticles strongly depends on DS and distribution of the substituents. Concerning this issue, quantitative (13)C NMR spectroscopy was applied for detailed structure characterization of selected cellulose acetates. The stability of the nanoparticle suspensions in the physiological pH range was observed by zeta potential measurements.     

Preparation of afterglow and photochromic fibrous mats from polypropylene plastics to detect ultraviolet light

Polypropylene textiles have been used in the development of various industrial products, such as automotives, plastic furniture, and medical tools. However, polypropylene resists dyeing due to a deficiency of active staining spots. Here, we developed a new strategy towards new afterglow and photochromic fibres from recycled polypropylene plastics using plasma-supported coloration with rare-earth activated aluminate nanoparticles (REANPs). Plasma curing was used to generate active dyeing sites on the polypropylene surface. A thin film of REANPs (2–10 nm) was deposited onto the plasma-pretreated polypropylene surface. Various analytical techniques were applied to inspect the morphology of the REANP-finished polypropylene fibres. The polypropylene dyeing activity was much improved after being exposed to plasma. Both photoluminescence analysis and Commission internationale de l’éclairage (CIE) laboratory coordinates proved that the polypropylene fibres exhibited a white colour in daylight and green in ultraviolet light. The thin afterglow layer immobilized onto the polypropylene surface exhibited an emission band of 524 nm upon excitation at 365 nm. The sliding angles dropped from 12° to 9°, but the contacting angles increased from 139.4° to 145.0° when the REANP ratio was raised. These findings show that REANP-finished polypropylene had good colourfastness, antimicrobial activity, and ultraviolet light blocking. Both stiffness and permeability to air of REANP-finished polypropylene were explored to designate excellent comfort characteristics.     

Spectral Investigations on the Fluorescence Quenching of 1,4-dihydroxy-2,3-dimethylanthracene-9,10-dione by Plasmonic Silver Nanoparticles

Silver nanoparticles (Ag NPs) of different sizes have been prepared by Lee and Meisel’s method using trisodium citrate as reducing agent under ultra sonication. Optical absorption and fluorescence emission techniques were employed to investigate the interaction of 1,4-dihydroxy-2,3-dimethyl anthracene-9,10-dione (DHDMAD) with silver nanoparticles. In fluorescence spectroscopic study, we used the DHDMAD and Ag NPs as component molecules for construction of Förster Resonance Energy Transfer (FRET), whereas DHDMAD serve as donor and Ag NPs as acceptor. The surface plasmon resonance (SPR) peak of the prepared silver colloidal solution was observed from 419 nm to 437 nm. The synthesized silver nanoparticles at different heating time intervals were spherical in shape about the size of 25 nm and 55 nm. The fluorescence interaction between silver nanoparticles and DHDMAD confirms the FRET mechanism. According to Förster theory, the distance between silver nanoparticles and DHDMAD and the critical energy transfer distance were calculated and it is increase with heating time.     

Immobilization of Candida rugosa lipase on electrospun cellulose nanofiber membrane

A biocatalyst with high activity retention of lipase was fabricated by the covalent immobilization of Candida rugosa lipase on a cellulose nanofiber membrane. This nanofiber membrane was composed of nonwoven fibers with 200 nm nominal fiber diameter. It was prepared by electrospinning of cellulose acetate (CA) and then modified with alkaline hydrolysis to convert the nanofiber surface into regenerated cellulose (RC). The nanofiber membrane was further oxidized by NaIO₄. Aldehyde groups were simultaneously generated on the nanofiber surface for coupling with lipase. Response surface methodology (RSM) was applied to model and optimize the modification conditions, namely NaIO₄ content (2–10 mg/mL), reaction time (2–10 h), reaction temperature (25–35 °C) and reaction pH (5.5–6.5). Well-correlating models were established for the residual activity of the immobilized enzyme (R² = 0.9228 and 0.8950). We found an enzymatic activity of 29.6 U/g of the biocatalyst was obtained with optimum operational conditions. The immobilized lipase exhibited significantly higher thermal stability and durability than equivalent free enzyme.     

Far-Red Fluorescent Protein Excitable with Red Lasers for Flow Cytometry and Superresolution STED Nanoscopy

Far-red fluorescent proteins are required for deep-tissue and whole-animal imaging and multicolor labeling in the red wavelength range, as well as probes excitable with standard red lasers in flow cytometry and fluorescence microscopy. Rapidly evolving superresolution microscopy based on the stimulated emission depletion approach also demands genetically encoded monomeric probes to tag intracellular proteins at the molecular level. Based on the monomeric mKate variant, we have developed a far-red TagRFP657 protein with excitation/emission maxima at 611/657 nm. TagRFP657 has several advantages over existing monomeric far-red proteins including higher photostability, better pH stability, lower residual green fluorescence, and greater efficiency of excitation with red lasers. The red-shifted excitation and emission spectra, as compared to other far-red proteins, allows utilizing TagRFP657 in flow cytometry and fluorescence microscopy simultaneously with orange or near-red fluorescence proteins. TagRFP657 is shown to be an efficient protein tag for the superresolution fluorescence imaging using a commercially available stimulated emission depletion microscope.     

Adhesion of mammalian cells to a recombinant attachment factor, CBD/RGD, analyzed by image analysis

A luminance thresholding procedure was developed to quantify cell attachment of a variety of cell lines to CBD/RGD, a hybrid attachment factor comprising a cellulose binding domain and the fibronectin-like RGD attachment peptide. The technique used local thresholding, median filtering, and opening to separate and count cells on each image. Cell lines exhibited three different patterns of attachment to CBD/RGD, depending on whether it was immobilized on polystyrene or cellulose acetate. Vero, COS, HFF, 3T3, 293, and U373 cells attached well to CBD/RGD immobilized on polystyrene or cellulose acetate. CHO, MRC-5, and HEp-2 cells attached to CBD/RGD immobilized on polystyrene, but not to CBD/RGD immobilized on cellulose acetate. BHK and L cells failed to attach to CBD/RGD immobilized on either polystyrene or cellulose acetate. The attachment of many cell lines to CBD/RGD was comparable with attachment of these cells to fibronectin. (c) 1995 John Wiley & Sons, Inc.     

Enhanced photoluminescence properties of electrospun Dy3+‐doped ZnO nanofibres for white lighting devices

Dy³⁺‐doped ZnO nanofibres with diameters from 200 to 500 nm were made using an electrospinning technique. The as‐fabricated amorphous nanofibres resulted in good crystalline continuous nanofibres through calcination. Dy³⁺‐doped ZnO nanofibres were characterized using scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), X‐ray diffraction (XRD), ultraviolet–visible (UV–vis) light spectroscopy, Fourier transform infrared spectroscopy (FTIR), and photoluminescence (PL). XRD showed the well defined peaks of ZnO. UV–vis spectra showed a good absorption band at 360 nm. FTIR spectra showed a Zn–O stretching vibration confirming the presence of ZnO. Photoluminescence spectra of Dy³⁺‐doped ZnO nanofibres showed an emission peak in the visible region that was free from any ZnO defect emission. Emissions at 480 nm and 575 nm in the Dy³⁺‐doped ZnO nanofibres were the characteristic peaks of dopant Dy³⁺ and implied efficient energy transfer from host to dopant. Luminescence intensity was found to be increased with increasing doping concentration and reduction in nanofibre diameter. Colour coordinates were calculated from photometric characterizations, which resembled the properties for warm white lighting devices.     

Blue excitable green emitting Ce3+ doped CaS phosphor for w‐LEDs

CaS:Ce³⁺ is an efficient green‐emitting (535 nm) phosphor, excitable with blue light (450–470 nm) and was synthesized via a solid‐state reaction method by heating under a reducing atmosphere. The luminescent properties, photoluminescent (PL) excitation and emission of the phosphor were analyzed by spectrofluorophotometry. The excitation and emission peaks of the CaS:Ce³⁺ phosphor lay in the visible region, which made them relevant for light‐emitting diode (LED) application for the generation of white light. Judd‐Oflet parameters were calculated and revealed that green light emitted upon blue illumination. The prepared phosphor had strong blue absorption at 470 nm and a broad green emission band range from 490–590 nm with the peak at 537 nm. The characteristics of the CaS:Ce³⁺ phosphor make it suitable for use as a wavelength tunable green emitting phosphor for three band white LEDs pumped by a blue LED (470 nm). The Commission International de l'Eclairage co‐ordinates were calculated by a spectrophotometric method using the spectral energy distribution (0.304, 0.526) and confirm the green emission. The potential application of this phosphor is as a phosphor‐converted white light‐emitting diode. Copyright © 2015 John Wiley & Sons, Ltd.     

Detection of tumor marker CA125 in ovarian carcinoma using quantum dots

The fluorescent labeling of biological materials usingsmall-molecule organic dyes is widely employed in bio-logical imaging and clinical diagnosis. Organic fluoro-phores, however, have certain characteristics that limittheir advantages in some applications. These limitationsinclude narrow excitation bands and broad emissionbands with red spectral tails, which make the simultaneousevaluation of several light-emitting probes difficult due tospectral overlap. Also, many organic dyes exhibit highp…     

Biologically synthesized fluorescent CdS NPs encapsulated by PHB

Here an attempt was made to biologically synthesize fluorescent cadmium sulfide nanoparticles and to immobilize the synthesized nanoparticles in PHB nanoparticles. The present study uses Brevibacterium casei SRKP2 as a potential producer for the green synthesis of CdS nanoparticles. Biologically synthesized nanoparticles were characterized and confirmed using electron microscopy and XRD. The size distribution of the nanoparticles was found to be 10-30 nm followed by which the consequence of time, growth of the organism, pH, concentration of CdCl(2) and Na(2)S on the synthesis of nanoparticles were checked. Enhanced synthesis and fluorescence emission of CdS nanoparticles were achieved at pH 9. The synthesized CdS NPs were immobilized with PHB and were characterized. The fluorescent intensity of the CdS nanoparticles remained unaffected even after immobilization within PHB nanoparticles.