Luminescence and energy‐transfer properties of color‐tunable Ca2Mg0.25Al1.5Si1.25O7:Ce3+/Eu2+/Tb3+ phosphors for ultraviolet light‐emitting diodes

A series of Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺/Eu²⁺/Tb³⁺ phosphors was been prepared via a conventional high temperature solid‐state reaction and their luminescence properties were studied. The emission spectra of Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺,Eu²⁺ and Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺,Tb³⁺ phosphors show not only a band due to Ce³⁺ ions (409 nm) but also as a band due to Eu²⁺ (520 nm) and Tb³⁺ (542 nm) ions. More importantly, the effective energy transfer from Ce³⁺ to Eu²⁺ and Tb³⁺ ions was confirmed and investigated by emission/excitation spectra and luminescent decay behaviors. Furthermore, the energy level scheme and energy transfer mechanism were investigated and were demonstrated to be of resonant type via dipole–dipole (Ce³⁺ to Eu²⁺) and dipole–quadrupole (Ce³⁺ to Tb³⁺) reactions, respectively. Under excitation at 350 nm, the emitting color could be changed from blue to green by adjusting the relative doping concentration of Ce³⁺ and Eu²⁺ ions as well as Ce³⁺ and Tb³⁺ ions. The above results indicate that Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺,Eu²⁺/Tb³⁺ are promising single‐phase blue‐to‐green phosphors for application in phosphor conversion white‐light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Tunable luminescence properties and energy transfer in LaAl11O18:Eu,Tb phosphor

Eu²⁺ and Tb³⁺ singly doped and co‐doped LaAl₁₁O₁₈ phosphors were prepared by a combustion method using urea as a fuel. The phase structure and photoluminescence (PL) properties of the prepared phosphors were characterized by powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence excitation and emission spectra. When the content of Eu²⁺ was fixed at 0.01, the emission chromaticity coordinates could be adjusted from blue to green region by tuning the contents of Tb³⁺ ions from 0.01 to 0.03 through an energy transfer (ET) process. The fluorescence data collected from the samples with different contents of Tb³⁺ into LaAl₁₁O₁₈: Eu, show the enhanced green emission at 545 nm associated with ⁵D₄ –⁷F₅ transitions of Tb³⁺. The enhancement was attributed to ET from Eu²⁺ to Tb³⁺, and therefore Eu²⁺ ion acts as a sensitizer (an energy donor) while Tb³⁺ ion as an activator. The ET from Eu²⁺ to Tb³⁺ is performed through dipole–dipole interaction. The ET efficiency and critical distance were also calculated. The present Eu²⁺–Tb³⁺ co‐doped LaAl₁₁O₁₈ phosphor will have potential application for UV convertible white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and luminescent properties of novel BaGd2O4:Eu3+ scintillating phosphor

BaGd_2‐xO₄:xEu³⁺ and Ba_1‐yGd_1.79‐2yEu_0.21Na_3yO₄ phosphors were synthesized at 1300°C in air by conventional solid‐state reaction method. Phosphors were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence excitation (PLE) spectra, photoluminescence (PL) spectra and thermoluminescence (TL) spectra. Optimal PL intensity for BaGd_2‐xO₄:xEu³⁺ and Ba_1‐yGd_1.79‐2yEu_0.21Na_3yO₄ phosphors at 276 nm excitation were found to be x = 0.24 and y = 0.125, respectively. The PL intensity of Eu³⁺ emission could only be enhanced by 1.3 times with incorporation of Na⁺ into the BaGd₂O₄ host. Enhanced luminescence was attributed to the flux effect of Na⁺ ions. However, when BaGd₂O₄:Eu³⁺ phosphors were codoped with Na⁺ ions, the induced defects confirmed by TL spectra impaired the emission intensity of Eu³⁺ ions. Copyright © 2012 John Wiley & Sons, Ltd.     

Luminescent properties of single‐phase Ba2‐x‐1.5y‐1.5zP2O7:xEu2+,yCe3+, zTb3+ phosphors for white light‐emitting diode

A series of Ba₂P₂O₇:xEu²⁺,yCe³⁺,zTb³⁺ phosphors was synthesized via a co‐precipitation method, then their crystal structure, quantum efficiency and luminescent properties were analyzed by XRD and FL, respectively. The results showed that these phosphors not only presented the excitation characteristics of Ba₂P₂O₇:xEu²⁺,zTb³⁺, but also exhibited that of the Ba₂P₂O₇:yCe³⁺,zTb³⁺ phosphor. Meanwhile, the tri‐doped phosphor showed a stronger absorption around 320 nm in contrast with the Eu²⁺/Ce³⁺:Tb³⁺ co‐doped phosphor. Not only can energy transfer from Ce³⁺→Eu²⁺ be observed; the energy transfer mechanism from Eu²⁺ to Tb³⁺ is discussed in the tri‐doped system. Ce³⁺ affects the luminescence properties of Ba₂P₂O₇:xEu²⁺,yCe³⁺,zTb³⁺ phosphors just as the sensitizer whereas Eu²⁺ is considered both as the sensitizer and the activator. The chromaticity coordinates of tri‐doped phosphors excited at 320 nm stayed steadily in the bluish‐white light region,and the emitted color and color temperature (CCT) of these phosphors could be tuned by adjusting the relative contents of Eu²⁺, Ce³⁺ and Tb³⁺. Hence, the single phase Ba₂P₂O₇:xEu²⁺,yCe³⁺,zTb³⁺ phosphors may be considered as potential candidates for white light‐emitting diodes.     

Luminescent properties and energy transfer in the green phosphors LaBSiO5:Tb3+,Ce3+

LaBSiO₅ phosphors doped with Ce³⁺ and Tb³⁺ were synthesized using the conventional solid‐state method at 1100 °C. The phase purity and luminescent properties of these phosphors are investigated. LaBSiO₅:Tb³⁺ phosphors show intense green emission, and LaBSiO₅ phosphors doped with Ce³⁺ show blue–violet emission under UV light excitation. LaBSiO₅ phosphors co‐doped with Ce³⁺ and Tb³⁺ exhibit blue–violet and green emission under excitation by UV light. The blue–violet emission is due to the 5d–4f transition of Ce³⁺ and the green emission is ascribed to the ⁵D₄ → ⁷ F₅ transition of Tb³⁺. The spectral overlap between the excitation band of Tb³⁺ and the emission band of Ce³⁺ supports the occurrence of energy transfer from Ce³⁺ to Tb³⁺, and the energy transfer process was investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

Tunable white light emission from single‐phased Li2SrSiO4:Dy3+ phosphors by co‐doping with Eu3+

A series of single‐phase full‐color emitting Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors were synthesized by solid‐state reaction and characterized by X‐ray diffraction and photoluminescence analyses. The samples showed emission peaks at 488 nm (blue), 572 nm (yellow), 592 nm (orange) and 617 nm (red) under 393 nm excitation. The photoluminescence excitation spectra, comprising the Eu–O charge transfer band and 4f–4f transition bands of Dy³⁺ and Eu³⁺, range from 200 to 500 nm. The Commission Internationale de I'Eclairage chromaticity coordinates for Li₂Sr_0.98−xSiO₄:0.02Dy³⁺,xEu³⁺ phosphors were simulated. By manipulating Eu³⁺ and Dy³⁺ concentrations, the color points of Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ were tuned from the greenish‐white region to white light and eventually to reddish‐white region, demonstrating that a tunable white light can be obtained by Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors. Li₂Sr_0.98−xSiO₄:0.02Dy³⁺, xEu³⁺ can serve as a white‐light‐emitting phosphor for phosphor‐converted light‐emitting diode. Copyright © 2014 John Wiley & Sons, Ltd.     

Electrospinning preparation and photoluminescence properties of Y3Al5O12:Tb3+ nanostructures

Novel nanostructures of Y₃Al₅O₁₂:Tb³⁺ (denoted as YAG:Tb³⁺ for short) nanobelts and nanofibers were fabricated by calcination of the respective electrospun PVP/[Y(NO₃)₃ + Tb(NO₃)₃ + Al(NO₃)₃] composite nanobelts and nanofibers. YAG:Tb³⁺ nanostructures are cubic in structure with a space group of I_a3d. The thickness and width of the YAG:7%Tb³⁺ nanobelts are respectively ca. 125 nm and 5.9 ± 0.3 µm, and the diameter of YAG:7%Tb³⁺ nanofibers is 166.0 ± 20 nm (95% confidence level). The YAG:Tb³⁺ nanostructures emit predominantly at 544 nm from the energy levels transition of ⁵D₄ → ⁷ F₅ of Tb³⁺ ions under the excitation of 274‐nm ultraviolet light. It was found that the optimum doping molar concentration of Tb³⁺ ions for YAG:Tb³⁺ nanostructures was 7%. Compared with YAG:7%Tb³⁺ nanofibers, YAG:7%Tb³⁺ nanobelts exhibit a stronger photoluminescence (PL) intensity under the same doping concentration. Commission International de l'Eclairage (CIE) analysis demonstrates that the emitting colors of YAG:Tb³⁺ nanostructures are located in the green region and color‐tuned luminescence can be obtained by changing the doping concentration of Tb³⁺ and morphologies of the nanostructures, which could be applied in the field of optical telecommunication and optoelectronic devices. The possible formation mechanisms of YAG:Tb³⁺ nanobelts and nanofibers are also proposed. Copyright © 2014 John Wiley & Sons, Ltd.     

Tunable emission,energy transfer and charge compensation in SrMoO4:Sm3+,Tb3+,Na+ phosphor

A series of SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ phosphors was synthesized using a high‐temperature solid‐state reaction method in air. On excitation at 290 nm, SrMoO₄:Sm³⁺,Tb³⁺ phosphor emitted light that varied systematically from green to reddish‐orange on changing the Sm³⁺ and Tb³⁺ ion concentrations. The emission intensities of SrMoO₄:Sm³⁺ and SrMoO₄:Sm³⁺,Tb³⁺ phosphors were increased two to four times due to charge compensation when Na⁺ was added as a charge compensator. The luminescence mechanism and energy transfer could be explained using energy‐level diagrams of the MoO₄^2– group, Sm³⁺ and Tb³⁺ ions. SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ could be used as reddish‐orange phosphor in white light‐emitting diodes (LEDs) based on an ~ 405 nm near‐UV LED chip. This research is helpful in adjusting and improving the luminescence properties of other phosphors. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence characteristics of (Y,Gd)BO3:RE (RE = Eu3+, Ce3+, Dy3+ and Tb3+) phosphors for blue chip and near‐UV white LEDs

A series of Eu³⁺‐, Ce³⁺‐, Dy³⁺‐ and Tb³⁺‐doped (Y,Gd)BO₃ phosphors was synthesized by a solid‐state diffusion method. X‐Ray diffraction confirmed their hexagonal structure and the scanning electron microscopy results showed crystalline particles. The excitation spectra revealed that (Y,Gd)BO₃ phosphors doped with Eu³⁺, Ce³⁺ , Dy³⁺ and Tb³⁺ are effectively excited with near UV‐light of 395 nm/blue light, 364, 351 and 314 nm, respectively. Photoluminescence spectra of Eu³⁺‐, Ce³⁺‐ and Tb³⁺/Dy³⁺‐doped phosphor showed intense emission of reddish orange, blue and white light, respectively. The phosphor Y_0.60Gd_0.38BO₃:Ce_0.02 showed CIE 1931 color coordinates of (0.158, 0.031) and better color purity compared with commercially available blue BAM:Eu²⁺ phosphor. The phosphor (Y,Gd)BO₃ doped with Eu³⁺, Dy³⁺ and Tb³⁺ showed CIE 1931 color coordinates of (0.667, 0.332), (0.251, 0.299) and (0.333, 0.391) respectively. Significant photoluminescence characteristics of the prepared phosphors indicate that they might serve as potential candidates for blue chip and near‐UV white light‐emitting diode applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Sr2ZnWO6:Eu3+,Bi3+,Li+: a potential white‐emitting phosphor for near‐ultraviolet white light‐emitting diodes

A series of Sr₂ZnWO₆ phosphors co‐doped with Eu³⁺, Bi³⁺ and Li⁺ were prepared using the Pechini method. The samples were tested using X‐ray diffraction and luminescence spectroscopy. The results show that the samples can be effectively excited by near‐ultraviolet (UV) and UV light. The introduction of Bi³⁺ and Li⁺ significantly enhances the fluorescence emission of Sr₂ZnWO₆:Eu³⁺ and changes the light emitted by the phosphors from bluish‐green to white. When excited at 371 nm, Sr_2–x–zZn_1–yWO₆:xEu³⁺,yBi³⁺,zLi⁺ (x = 0.05, y = 0.05, z = 0.05, 0.1 and 0.15) samples emit high‐performance white light. Intense red–orange emission is also observed when excited by UV light. The obtained phosphor is a potential white‐emitting phosphor that could meet the needs of excitation sources with near‐UV chips. In addition, this phosphor might have promising application as a red–orange emitting phosphor for white light‐emitting diodes based on UV light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Mechanoluminescence,thermoluminescence, photoluminescence studies on Ca3Y2Si3O12:RE3+ (RE3+ = Dy3+and Eu3+) phosphors

Dy³⁺ and Eu³⁺ activated Ca₃Y₂Si₃O₁₂ phosphors were synthesized by the solid‐state synthesis method. The phosphors were characterized by X‐ray diffraction (XRD), mechanoluminescence (ML), thermoluminescence (TL) and photoluminescence (PL) to determine structure and luminescence. For ML glow curves, only one peak was observed, as only one type of luminescence centre was formed during irradiation. The Ca₃Y₂Si₃O₁₂:Dy³⁺ TL glow curve showed a single peak at 151.55°C and the Ca₃Y₂Si₃O₁₂:Eu³⁺ TL glow curve peaked at 323°C with a small peak at 192°C, indicating that two types of traps were activated. The trapping parameters for both the samples were calculated using Chen's peak shape method. Dy³⁺‐activated Ca₃Y₂Si₃O₁₂ showed emission at 482 and 574 nm when excited by a 351 nm excitation wavelength, whereas the Eu³⁺‐activated Ca₃Y₂Si₃O₁₂ phosphor PL emission spectra showed emission peaks at 613 nm, 591 nm, 580 nm when excited at 395 nm wavelength. When excited at 466 nm, prominent emission peaks were observed at their respective positions with very slight shifts. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence properties of Ca2Al2O5:RE3+ (RE = Eu,Dy and Tb) phosphors for solid state lighting

Ca₂Al₂O₅:Eu³⁺, Ca₂Al₂O₅:Dy³⁺ and Ca₂Al₂O₅:Tb³⁺ phosphors were synthesized using a combustion synthesis method. The prepared phosphors were characterized by X‐ray powder diffraction for phase purity, by scanning electron microscopy for morphology, and by photoluminescence for emission and excitation measurements. The Ca₂Al₂O₅:Eu³⁺ phosphors could be efficiently excited at 396 nm and showed red emission at 594 nm and 616 nm due to ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂ transitions. Dy³⁺‐doped phosphors showed blue emission at 482 nm and yellow emission at 573 nm. Ca₂Al₂O₅:Tb³⁺ phosphors showed emission at 545 nm when excited at 352 nm. Concentration quenching occurred in both Eu³⁺ and Dy³⁺phosphors at 0.5 mol%. Photoluminescence results suggested that the aluminate‐based phosphor could be a potential candidate for application in environmentally friendly based lighting technologies.     

Persistent luminescence of CaMgSi2O6:Eu2+,Dy3+ and CaMgSi2O6:Eu2+,Ce3+ phosphors prepared using the solid‐state reaction method

CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors were synthesized using the solid‐state reaction method. X‐Ray diffraction (XRD) and photoluminescence (PL) analyses were used to characterize the phosphors. The XRD results revealed that the synthesized CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors were crystalline and are assigned to the monoclinic structure with a space group C2/c. The calculated crystal sizes of CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors with a main (221) diffraction peak were 44.87 and 53.51 nm, respectively. Energy‐dispersive X‐ray spectroscopy (EDX) confirmed the proper preparation of the sample. The PL emission spectra of CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors have a broad band peak at 444.5 and 466 nm, respectively, which is due to electronic transition from 4f⁶5d¹ to 4f⁷. The afterglow results indicate that the CaMgSi₂O₆:Eu²⁺,Dy³⁺ phosphor has better persistence luminescence than the CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphor. Copyright © 2015 John Wiley & Sons, Ltd.     

Intensity enhancement of photoluminescence in Tb3+/Eu3+ co-doped Ca14Zn6Al10O35 phosphor for WLEDs

This article focuses on the effect of monovalent cation doping on the optical properties of rare earth (RE = Eu³⁺, Tb³⁺) co-doped Ca₁₄Zn₆Al₁₀O₃₅ which has been synthesized by a low temperature combustion method. Crystalline phase of the Ca₁₄Zn₆Al₁₀O₃₅ phosphor was examined and confirmed by X-ray diffraction measurement. Under near-ultraviolet light excitation Eu³⁺-doped Ca₁₄Zn₆Al₁₀O₃₅ phosphor exhibit characterization of Eu³⁺ emission bands that are located at a maximum wavelength (λ_max) of approximately 470 nm and other peaks centred at 593 nm and 615 nm, respectively. With Tb³⁺-doped Ca₁₄Zn₆Al₁₀O₃₅ phosphor showing a green emission band centred at 544 nm under near-ultraviolet range. Furthermore, we studied the energy transfer process in Eu³⁺/Tb³⁺pair and enhancement in photoluminescence (PL) intensity with doping different charge compensation. Here we obtained the optimum PL emission intensity of the phosphor in broad and intense visible spectral range which may be significant for the fabrication of white light emitting diodes (WLEDs).     

Study on luminescence properties of Ce3+ and Eu3+ ions in a nanocrystalline hexagonal Zn4Al22O37 novel system

The present communication is strongly focused on the investigation of synthesis, structural and luminescence properties of cerium (Ce³⁺)- and europium (Eu³⁺)-activated Zn₄Al₂₂O₃₇ phosphors. Ce³⁺- and Eu³⁺-doped Zn₄Al₂₂O₃₇ novel phosphors were prepared using a solution combustion synthesis route. Structural properties were studied using powder X-ray diffraction and high-resolution transverse electron microscopy. The optical properties were studied using ultraviolet–visible light spectroscopy and Fourier transform infrared spectroscopy; luminescence properties were studied using a photoluminescence (PL) technique. The crystal structure of the prepared Zn₄Al₂₂O₃₇ host and Ce³⁺- and Eu³⁺-activated Zn₄Al₂₂O₃₇ phosphors was investigated and was found to have a hexagonal structure. The measured PL emission spectrum of the Ce³⁺-doped Zn₄Al₂₂O₃₇ phosphor showed an intense and broad emission band centred at 421 nm under a 298 nm excitation wavelength. By contrast, the Eu³⁺-doped Zn₄Al₂₂O₃₇ phosphor exhibited two strong and intense emission bands at approximately 594 nm (orange) and 614 nm (red), which were monitored under 395 nm excitation. The Commission Internationale de l’Eclairage (CIE) colour coordinates of the Ce³⁺-doped Zn₄Al₂₂O₃₇ were investigated and found to be x = 0.1567, y = 0.0637 (blue) at 421 nm and for Eu³⁺-doped Zn₄Al₂₂O₃₇ were x = 0.6018, y = 0.3976 (orange) at 594 nm and x = 0.6779, y = 0.3219 (red) at 614 nm emission. The luminescence behaviour of the synthesized phosphors suggested that these phosphors may be used in lighting applications.     

Tunable photoluminescence properties of Sr1‐yCayMoO4:Sm3+ phosphors (0 ≤ y < 1)

A series of Sr_1‐x‐yCa_yMoO₄:xSm³⁺ (0 ≤ x ≤ 7 mol% and 0 ≤ y < 1) phosphors was synthesized by a conventional solid‐state reaction method in air, and their structural and spectroscopic properties were investigated. The optimal doping concentration of Sm³⁺ in SrMoO₄:Sm³⁺ phosphor is 5 mol%. Under excitation with 275 nm, in Sr_1‐x‐yCa_yMoO₄:xSm³⁺ (0 ≤ x ≤ 7 mol% and 0 ≤ y < 1) phosphors, the emission band of the host was found to overlap with the excitation bands peaking at ~500 nm of Sm³⁺ ion, and the energy transfer from MoO₄^2? group to Sm³⁺ ion can also be observed. The International Commission on Illumination (CIE) chromaticity coordinates of Sr_0.95‐yCa_yMoO₄:0.05Sm³⁺ phosphors with excitation 275 nm varied systematically from an orange (0.4961, 0.3761) (y = 0) to a white color (0.33, 0.3442) (y = 0.95) with increasing calcium oxide (CaO) concentration. However, Sr_0.95‐yCa_yMoO₄:0.05Sm³⁺ phosphors with excitation at 404 nm only showed red emission and the energy transfer between MoO₄^2? group to Sm³⁺ ion was not observed. The complex mechanisms of luminescence and energy transfer are discussed by energy level diagrams of MoO₄^2? group and Sm³⁺ ion. Copyright © 2015 John Wiley & Sons, Ltd.     

Tunable warm white light emission and energy transfer of Dy3+ co-doped Sr2LaZrO5.5:Eu3+ phosphors

Eu³⁺,Dy³⁺ co-doped Sr₂LaZrO_5.5-based phosphors were prepared through a sol–gel method. Through characterization, it was found that the Sr₂LaZrO_5.5-based fluorescent powder co-doped with Eu³⁺ and Dy³⁺ had a cubic structure. At an excitation wavelength of 290 nm, the substrate Sr₂LaZrO_5.5 exhibited strong blue emission at 468 nm, and the Sr₂LaZrO_5.5:18%Eu³⁺ phosphor exhibited a strong red emission peak at 612 nm. When the doping amount of Dy³⁺ was 5, 8, 12, 15, or 18%, the Sr₂LaZrO_5.5:18%Eu³⁺ phosphor changed from an orange-red light, to a warm white light, and to a cold white light. According to the emission spectra, the emission intensities of the substrates Sr₂LaZrO_5.5 and Sr₂LaZrO_5.5:Eu³⁺ decreased with increasing Dy³⁺ concentration, confirming the energy transfer between the host Sr₂LaZrO_5.5-Eu³⁺,Dy³⁺, and resulting in a lower CCT value, with significantly improved white light emission.     

Rapid synthesis of BaMoO4:Eu3+ red phosphors using microwave irradiation

This study synthesized BaMoO4:Eu³⁺ red phosphors using the microwave method. In addition, the phase composition, morphology, and luminescence properties of the red phosphors were characterized using X-ray diffraction, field-scanning electron microscopy, and photoluminescence spectroscopy. The results revealed that doping red phosphors with different concentrations of Eu³⁺ does not change the crystal structure of the matrix material. The BaMoO₄:Eu³⁺ phosphors exhibited micron-scale irregular polyhedra, which could be excited by ultraviolet light with a wavelength of 395 nm to induce red-light emission. The optimal dosage of Eu³⁺ was 0.08, and the chromaticity coordinates of BaMoO₄:0.08Eu³⁺ phosphors were (0.5869, 0.3099). White light-emitting diode (w-LED) devices manufactured by using a combination of BaMoO₄:0.08Eu³⁺ phosphor and commercially available phosphors exhibited good white-light emission under the excitation of an ultraviolet chip. The BaMoO₄:0.08Eu³⁺ red phosphors that rapidly synthesized under the microwave field are expected to be used in w-LED devices.     

Studies on the luminescence properties of cerium co‐doping on Ca2MgSi2O7:Eu2+ phosphor by solid‐state reaction method

Ca₂MgSi₂O₇:Ce³⁺, Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺,Ce³⁺ phosphors were prepared using the solid‐state reaction method. The crystal structures of the sintered phosphors were of melilite type, which has a tetragonal crystallography. The chemical compositions of the sintered phosphors was confirmed by energy dispersive X‐ray spectroscopy. The different thermoluminescence kinetic parameters [activation energy (E), frequency factor (s) and order of the kinetics (b)] of these phosphors were evaluated and compared using the peak shape method. Under ultraviolet excitation, the emission spectra of both Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺,Ce³⁺ phosphors were composed of a broad emission band peaking at 530 nm. When the Ca₂MgSi₂O₇:Eu²⁺ phosphor is co‐doped with Ce³⁺ ions, photoluminescence, afterglow and mechanoluminescence intensity was strongly enhanced. Ca₂MgSi₂O₇:Eu²⁺ showed some afterglow with a short persist time. On incorporation of Ce³⁺, efficient energy transfer from Ce³⁺ to Eu²⁺ was found and the emission intensity of Eu²⁺ was enhanced. The mechanoluminescence intensities of Ca₂MgSi₂O₇:Ce³⁺, Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺,Ce³⁺ phosphors increased proportionally increased with the increase in impact velocity, which suggests that these phosphors can be used as sensors to detect stress in an object.     

Synthesis and luminescence properties of Ca3Ga2Si3O12:RE3+ (RE = Eu/Tb) powder phosphors

Rare earth ions (Eu³⁺ or Tb³⁺)‐activated Ca₃ Ga₂ Si₃O₁₂ (CaGaSi) phosphors were synthesized by using a sol–gel method. Photoluminescence spectra of Eu³⁺:CaGaSi phosphors exhibited five emission bands at 578, 592, 612, 652 and 701 nm, which were assigned to the transitions (⁵D₀ → ⁷F₀, ⁷F_1, ⁷F₂, ⁷F₃ and ⁷F₄), respectively, with an excitation wavelength of λ_exci = 392 nm. Among these, the transition ⁵D₀ → ⁷F₂ (612 nm) displayed bright red emission. In the case of Tb³⁺:CaGaSi phosphors, four emission bands were observed at 488 (⁵D₄ → ⁷F₆), 543 (⁵D₄ → ⁷F₅), 584 (⁵D₄ → ⁷F₄) and 614 nm (⁵D₄ → ⁷F₃) from the measurement of PL spectra with λ_exci = 376 nm. Among these, the transition ⁵D₄ → ⁷F₅ at 543 nm displayed bright green emission. The structure and morphology of the phosphors were studied from the measurements of X‐ray diffraction (XRD), scanning electron microscopy (SEM) and energy‐dispersive X‐ray analysis (EDAX) results. Copyright © 2011 John Wiley & Sons, Ltd.