Preparation and luminescence properties of KLaSiO4:Tb3+ phosphors

KLaSiO₄:Tb³⁺ phosphors were synthesized using the sol–gel method. The structure and luminescence properties of the materials were characterized using X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, thermogravimetry–differential thermal analysis, fluorescence spectra and calculated Commission Internationale de l'éclairage coordinates. The results showed that the material had a hexagonal structure, and that doping of Tb³⁺ did not change the crystal structure of KLaSiO₄. FTIR spectroscopy confirmed the existence of stretching vibrations of Si–O, bending vibrations of Si–O–Si, and asymmetric tensile vibrations of Si–O in KLaSiO₄. The excitation spectrum of the sample consisted of 4f⁷→5d¹ broadband absorption and the characteristic excitation peak of Tb³⁺, the excitation peak at 232 nm belongs to the spin allowed ⁷F_J→⁷D_J transition of Tb³⁺, the excitation peak at 268 nm belongs to the spin forbidden ⁷F_J→⁹D_J transition of Tb³⁺, and the absorption band of ⁷F_J→⁷D_J transition is split. Under excitation at 232 nm, the emission peak of the sample was composed of the ⁵D₄→⁷F_J (J = 6, 5, 4, 3) energy level transition of Tb³⁺. The highest emission peak is located at 543 nm, which belongs to the ⁵D₄→⁷F₅ transition and emits green light. Concentration quenching occurred when the Tb³⁺ doping concentration was greater than 1% mol, the quenching mechanism was an electric dipole–electric dipole action. When the ratio of citric acid to total metal ions was 1:1 and the annealing temperature was 800°C, the surface defects of the phosphors were greatly reduced, the quenching effect was reduced, and the luminous intensity reached the maximum.     

Structure and photoluminescent properties of green‐emitting terbium‐doped GdV1−xPxO4 phosphor prepared by solution combustion method

Terbium‐doped gadolinium orthovanadate (GdVO₄:Tb³⁺), orthophosphate monohydrate (GdPO₄·H₂O:Tb³⁺) and orthovanadate–phosphate (GdV,PO₄:Tb³⁺) powder phosphors were synthesized using a solution combustion method. X‐Ray diffraction analysis confirmed the formation of crystalline GdVO₄, GdPO₄·H₂O and GdV,PO₄. Scanning electron microscopy images showed that the powder was composed of an agglomeration of particles of different shapes, ranging from spherical to oval to wire‐like structures. The chemical elements present were confirmed by energy dispersive spectroscopy, and the stretching mode frequencies were determined by Fourier transform infrared spectroscopy. UV–visible spectroscopy spectra showed a strong absorption band with a maximum at 200 nm assigned to the absorption of VO₄^3? and minor excitation bands assigned to f → f transitions of Tb³⁺. Four characteristic emission peaks were observed at 491, 546, 588 and 623 nm, and are attributed to ⁵D₄ → ⁷F_j (j = 6, 5, 4 and 3). The photoluminescent prominent green emission peak (⁵D₄ → ⁷F₅) was centred at 546 nm. The structure and possible mechanism of light emission from GdV_1?xP_xO₄:% Tb³⁺ are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Energy transfer between Ce3+ → Gd3+ or Tb3+ in KNaSO4 microphosphor

KNaSO₄ microphosphor doped with Ce,Gd and Ce,Tb and prepared by a wet chemical method was studied using X‐ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) characterization. KNaSO₄ has a 5‐µm particle size detected by SEM. KNaSO₄:Ce³⁺,Tb³⁺ showed blue and green emission (at 494 nm, 557 nm, 590 nm) of Tb³⁺ due to ⁵D₄ → ⁷F_J (J = 4, 5, 6) transitions. KNaSO₄:Ce³⁺,Gd³⁺ showed luminescence in the ultraviolet (UV) light region at 314 nm for an excitation at 271 nm wavelength. It was observed that efficient energy transfer took place from Ce³⁺ → Gd³⁺ and Ce³⁺ → Tb³⁺ sublattices indicating that Ce³⁺ could effectively sensitize Gd³⁺ or Tb³⁺ (green emission). Ce³⁺ emission weakened and Gd³⁺ or Tb³⁺ enhanced the emission significantly in KNaSO₄. This paper discusses the development and understanding of photoluminescence and the effect of Tb³⁺ and Gd³⁺ on KNaSO₄:Ce³⁺. Copyright © 2015 John Wiley & Sons, Ltd.     

Thermoluminescence and photoluminescence studies on γ‐ray‐irradiated Ce3+,Tb3+‐doped potassium chloride single crystals

Single crystals of KCl doped with Ce³⁺,Tb³⁺ were grown using the Bridgeman–Stockbarger technique. Thermoluminescence (TL), optical absorption, photoluminescence (PL), photo‐stimulated luminescence (PSL), and thermal‐stimulated luminescence (TSL) properties were studied after γ‐ray irradiation at room temperature. The glow curve of the γ‐ray‐irradiated crystal exhibits three peaks at 420, 470 and 525 K. F‐Light bleaching (560 nm) leads to a drastic change in the TL glow curve. The optical absorption measurements indicate that F‐ and V‐centres are formed in the crystal during γ‐ray irradiation. It was attempted to incorporate a broad band of cerium activator into the narrow band of terbium in the KCl host without a reduction in the emission intensity. Cerium co‐doped KCl:Tb crystals showed broad band emission due to the d–f transition of cerium and a reduction in the intensity of the emission peak due to ⁵D₃–⁷F_j (j = 3, 4) transition of terbium, when excited at 330 nm. These results support that energy transfer occurs from cerium to terbium in the KCl host. Co‐doping Ce³⁺ ions greatly intensified the excitation peak at 339 nm for the emission at 400 nm of Tb³⁺. The emission due to Tb³⁺ ions was confirmed by PSL and TSL spectra. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence properties of barium – gadolinium–titanate ceramics doped with rare‐earth ions (Eu3+ and Tb3+)

Barium‐gadolinium‐titanate (BaGd₂Ti₄O₁₂) powder ceramics doped with rare‐earth ions (Eu³⁺ and Tb³⁺) were synthesized by a solid‐state reaction method. From the X‐ray diffraction spectrum, it was observed that Eu³⁺ and Tb³⁺:BaGd₂Ti₄O₁₂ powder ceramics are crystallized in the form of an orthorhombic structure. Scanning electron microscopy image shows that the particles are agglomerated and the particle size is about 200 nm. Eu³⁺‐ and Tb³⁺‐doped BaGd₂Ti₄O₁₂ powder ceramics were examined by energy dispersive X‐ray analysis, Fourier transform infrared spectroscopy, photoluminescence and thermoluminescence (TL) spectra. Emission spectra of Eu³⁺‐doped BaGd₂Ti₄O₁₂ powder ceramics showed bright red emission at 613 nm (⁵D₀ → ⁷F₂) with an excitation wavelength λ_exci = 408 nm (⁷F₀ → ⁵D₃) and Tb³⁺:BaGd₂Ti₄O₁₂ ceramic powder has shown green emission at 534 nm (⁵D₄ → ⁷F₅) with an excitation wavelength λ_exci = 331 nm ((⁷F₆ → ⁵D₁). TL spectra show that Eu³⁺ and Tb³⁺ ions affect TL sensitivity. Copyright © 2014 John Wiley & Sons, Ltd.     

Improving green emission of Tb3+ ions in BaO‐B2O3‐P2O5 glasses by means of Al3+ ions

BaO‐B₂O₃‐P₂O₅ glasses doped with a fixed concentration of Tb³⁺ ions and varying concentrations of Al₂O₃ were synthesized, and the influence of the Al³⁺ ion concentration on the luminescence efficiency of the green emission of Tb³⁺ ions was investigated. The optical absorption, excitation, luminescence spectra and fluorescence decay curves of these glasses were recorded at ambient temperature. The emission spectra of terbium ions when excited at 393 nm exhibited two main groups of bands, corresponding to ⁵D₃ → ⁷F_j (blue region) and ⁵D₄ → 7F_j (green region). From these spectra, the radiative parameters, viz., spontaneous emission probability A, total emission probability A_T, radiative lifetime τ and fluorescent branching ratio β, of different transitions originating from the ⁵D₄ level of Tb³⁺ ions were evaluated based on the Judd‐Ofelt theory. A clear increase in the quantum efficiency and luminescence of the green emission of Tb³⁺ ions corresponding to ⁵D₄ → ⁷F₅ transition is observed with increases in the concentration of Al₂O₃ up to 3.0 mol%. The improvement in emission is attributed to the de‐clustering of terbium ions by Al³⁺ ions and also to the possible admixing of wave functions of opposite parities. Copyright © 2016 John Wiley & Sons, Ltd.     

Luminescence properties of Tb3+ doped Sr2SnO4 green phosphor in UV/VUV regions

Polycrystalline Sr₂SnO₄ phosphors doped with Tb³⁺ were prepared by conventional solid‐state reaction method. Materials were characterized by powder XRD and EDS techniques. The luminescence properties of these materials were investigated under UV and VUV excitation. Upon excitation at 272 nm, phosphors exhibited intense emissions at 492 and 543 nm due to ⁵D₄ → ⁷ F₆ and ⁵D₄ → ⁷ F₅ transitions of Tb³⁺ ions, respectively. Materials also exhibited strong emissions from these transitions under VUV excitation at 147, 173 and 230 nm. Quantitative analysis of the spectra indicated probable applications of these phosphors for PDP and other display devices as green emitting phosphors. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and luminescence properties of Ca3Ga2Si3O12:RE3+ (RE = Eu/Tb) powder phosphors

Rare earth ions (Eu³⁺ or Tb³⁺)‐activated Ca₃ Ga₂ Si₃O₁₂ (CaGaSi) phosphors were synthesized by using a sol–gel method. Photoluminescence spectra of Eu³⁺:CaGaSi phosphors exhibited five emission bands at 578, 592, 612, 652 and 701 nm, which were assigned to the transitions (⁵D₀ → ⁷F₀, ⁷F_1, ⁷F₂, ⁷F₃ and ⁷F₄), respectively, with an excitation wavelength of λ_exci = 392 nm. Among these, the transition ⁵D₀ → ⁷F₂ (612 nm) displayed bright red emission. In the case of Tb³⁺:CaGaSi phosphors, four emission bands were observed at 488 (⁵D₄ → ⁷F₆), 543 (⁵D₄ → ⁷F₅), 584 (⁵D₄ → ⁷F₄) and 614 nm (⁵D₄ → ⁷F₃) from the measurement of PL spectra with λ_exci = 376 nm. Among these, the transition ⁵D₄ → ⁷F₅ at 543 nm displayed bright green emission. The structure and morphology of the phosphors were studied from the measurements of X‐ray diffraction (XRD), scanning electron microscopy (SEM) and energy‐dispersive X‐ray analysis (EDAX) results. Copyright © 2011 John Wiley & Sons, Ltd.     

Crystallographic,morphological and photoluminescent investigations of Tb3+-doped YAlO3 perovskites for lighting applications

Terbium(III)-doped yttrium aluminate perovskite (YAP:xTb³⁺) (x = 0.01–0.08 mol) was synthesized using a simple gel-combustion method. Structural elucidations were performed using X-ray diffraction (XRD) and Rietveld analysis. Fourier-transform infrared spectral studies validated the efficient synthesis of designed doped samples. Transmission electron microscopic images showed the agglomerated irregular dimensions of the synthesized nanocrystalline materials. When excited at 251 nm, a strong emissive line attributed to ⁵D₄ → ⁷F₅ electronic transition was observed at 545 nm (green emission). The maximum luminescence was found at the optimized concentration (0.05 mol) of Tb³⁺ ions; this emission was quenched by dipolar–dipolar (d–d) interactions. Chromaticity (x and y) and correlated colour temperature parameters were obtained by analysing the emission profiles. Finally, the colour coordinates of nanophosphors were closer to the National Television Standards Committee green coordinates, which replicates their potency in the design and architecture of R-G-B-based white LEDs.     

Intense green light emission and thermoluminescence glow curve analysis of Tb3+-activated CaY2O4 phosphor

Here, the synthesis and luminescence analysis of the Tb³⁺-activated phosphor were reported. The CaY₂O₄ phosphors were synthesized using a modified solid-state reaction method with a variable doping concentration of Tb³⁺ ion (0.1–2.5 mol%). As synthesized, the phosphor was characterized using Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction analysis techniques for the optimized concentration of doping ions. The prepared phosphor showed a cubic structure, and FTIR analysis confirmed functional group analysis. It was discovered that the intensity of 1.5 mol% was higher than at other concentrations after the photoluminescence (PL) excitation and emission spectra were recorded for different concentrations of doping ions. The excitation was monitored at 542 nm, and the emission was monitored at 237 nm. At 237 nm excitation, the emission peaks were found at 620 nm (⁵D₄→⁷F₃), 582 nm (⁵D₄→⁷F₄), 542 nm (⁵D₄→⁷F₅), and 484 nm (⁵D₄→⁷F₆). The 1931 CIE (x, y) chromaticity coordinates showed the distribution of the spectral region calculated from the PL emission spectra. The values of (x = 0.34 and y = 0.60) were very close to dark green emission. Therefore, the produced phosphor would be very useful for light-emitting diode (green component) applications. Thermoluminescence glow curve analysis for various concentrations of doping ions and various ultraviolet (UV) exposure times was carried out, and a single broad peak was found at 252°C. The computerized glow curve deconvolution method was used to obtain the related kinetic parameters. The prepared phosphor exhibited an excellent response to UV dose and could be useful for UV ray dosimetry.     

Optical analysis of RE3+ (RE = Eu,Tb):MgLa2V2O9 nano-phosphors

Red and green rare-earth ion (RE³⁺) (RE = Eu, Tb):MgLa₂V₂O₉ micro-powder phosphors were produced utilizing a standard solid-state chemical process. The X-ray diffraction examination performed on the phosphors showed that they were crystalline and had a monoclinic structure. The particles grouped together, as shown in the scanning electron microscopy (SEM) images. Powder phosphors were examined using a variety of spectroscopic techniques, including photoluminescence (PL), Fourier-transform infrared, and energy dispersive X-ray spectroscopy. Brilliant red emission at 615 nm (⁵D₀ → ⁷F₂) having an excitation wavelength (λ_exci) of 396 nm (⁷F₀ → ⁵L₆) and green emission at 545 nm (⁵D₄ → ⁷F₅) having an λ_exci = 316 nm (⁵D₄ → ⁷F₂) have both been seen in the emission spectra of Tb³⁺:MgLa₂V₂O₉ nano-phosphors. The emission mechanism that is raised in Eu³⁺:MgLa₂V₂O₉ and Tb³⁺:MgLa₂V₂O₉ powder phosphors has been explained in an energy level diagram.     

Luminescence and dosimetry approach in terbium(III)-activated tungstate double perovskite

A series of tungstate double perovskite Ca₃WO₆ doped with Tb³⁺ was prepared by a combustion process using urea as a flux. The crystal structure identification of Ca₃WO₆:Tb³⁺ phosphors was done using X-ray diffraction patterns, and a monoclinic structure was discovered. The Fourier transform infrared spectrum of Ca₃WO₆:Tb³⁺ displayed characteristic vibrations of tungstate bonds. Under 278 nm excitation, Ca₃WO₆:Tb³⁺ exhibited intense downconversion green emission, which corresponded to the ⁵D₄–⁷F_J (J = 4,5) transitions of Tb³⁺. The phosphor exhibited the highest photoluminescence (PL) intensity when it was doped with 1 mol% of Tb³⁺; later intensity quenching appeared to be due to the multipolar interaction at higher dopant concentrations. Moreover, high-quality thermoluminescence (TL) was detected when phosphors were irradiated using beta rays. The effects of Tb³⁺ concentration and beta dose on TL intensity were the two major aspects studied in detail. The TL intensity demonstrated excellent linear response to the applied range of beta dose. The trap parameters of the studied phosphors were computed by the peak shape approach and glow curve deconvolution. The fading effect on TL intensity was studied by recording the TL glow curves after 1 month of beta irradiation. Obtained results from the PL and TL characterizations showed that the phosphors under study have the potential to be used in lighting displays and in thermoluminescence dosimetry.     

Electrospinning preparation and photoluminescence properties of Y3Al5O12:Tb3+ nanostructures

Novel nanostructures of Y₃Al₅O₁₂:Tb³⁺ (denoted as YAG:Tb³⁺ for short) nanobelts and nanofibers were fabricated by calcination of the respective electrospun PVP/[Y(NO₃)₃ + Tb(NO₃)₃ + Al(NO₃)₃] composite nanobelts and nanofibers. YAG:Tb³⁺ nanostructures are cubic in structure with a space group of I_a3d. The thickness and width of the YAG:7%Tb³⁺ nanobelts are respectively ca. 125 nm and 5.9 ± 0.3 µm, and the diameter of YAG:7%Tb³⁺ nanofibers is 166.0 ± 20 nm (95% confidence level). The YAG:Tb³⁺ nanostructures emit predominantly at 544 nm from the energy levels transition of ⁵D₄ → ⁷ F₅ of Tb³⁺ ions under the excitation of 274‐nm ultraviolet light. It was found that the optimum doping molar concentration of Tb³⁺ ions for YAG:Tb³⁺ nanostructures was 7%. Compared with YAG:7%Tb³⁺ nanofibers, YAG:7%Tb³⁺ nanobelts exhibit a stronger photoluminescence (PL) intensity under the same doping concentration. Commission International de l'Eclairage (CIE) analysis demonstrates that the emitting colors of YAG:Tb³⁺ nanostructures are located in the green region and color‐tuned luminescence can be obtained by changing the doping concentration of Tb³⁺ and morphologies of the nanostructures, which could be applied in the field of optical telecommunication and optoelectronic devices. The possible formation mechanisms of YAG:Tb³⁺ nanobelts and nanofibers are also proposed. Copyright © 2014 John Wiley & Sons, Ltd.     

Tunable luminescence properties and energy transfer in LaAl11O18:Eu,Tb phosphor

Eu²⁺ and Tb³⁺ singly doped and co‐doped LaAl₁₁O₁₈ phosphors were prepared by a combustion method using urea as a fuel. The phase structure and photoluminescence (PL) properties of the prepared phosphors were characterized by powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence excitation and emission spectra. When the content of Eu²⁺ was fixed at 0.01, the emission chromaticity coordinates could be adjusted from blue to green region by tuning the contents of Tb³⁺ ions from 0.01 to 0.03 through an energy transfer (ET) process. The fluorescence data collected from the samples with different contents of Tb³⁺ into LaAl₁₁O₁₈: Eu, show the enhanced green emission at 545 nm associated with ⁵D₄ –⁷F₅ transitions of Tb³⁺. The enhancement was attributed to ET from Eu²⁺ to Tb³⁺, and therefore Eu²⁺ ion acts as a sensitizer (an energy donor) while Tb³⁺ ion as an activator. The ET from Eu²⁺ to Tb³⁺ is performed through dipole–dipole interaction. The ET efficiency and critical distance were also calculated. The present Eu²⁺–Tb³⁺ co‐doped LaAl₁₁O₁₈ phosphor will have potential application for UV convertible white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Red emissive ternary europium complexes: synthesis,optical, and luminescence characteristics

Solid ternary europium complexes consisting of fluorinated β-diketone (thenoyltrifluoroacetone, TTFA) and heteroaromatic bidentate auxiliary ligands were synthesized. The luminescence features of the complexes were estimated using various spectral measurements and clearly proved that the Eu³⁺ ion is efficiently sensitized by ligands by an antenna effect. Photoluminescence excitation spectra have shown that Eu(III) complexes are excited effectively in the ultraviolet (UV) region and the corresponding emission spectra consist of characteristic peaks attributed to the ⁵D₀→⁷F_J transitions of the europium ion with the strongest emission peak at 611 nm (⁵D₀→⁷F₂). From photoluminescence (PL) data, decay time, Judd–Ofelt parameters, transition rates, and quantum efficiency of the complexes were also determined. The Commission Internationale de l'éclairage (CIE) colour coordinates indicated the bright red emission of ternary europium complexes. Correlated colour temperature values indicated the utilization of these complexes in display devices. Judd–Ofelt and photophysical parameters were also estimated theoretically using LUMPAC software. Various frontier molecular orbitals and their respective energy were determined. These red emissive europium complexes could be utilized for fabricating solid-state lighting systems.     

Luminescent properties and energy transfer in the green phosphors LaBSiO5:Tb3+,Ce3+

LaBSiO₅ phosphors doped with Ce³⁺ and Tb³⁺ were synthesized using the conventional solid‐state method at 1100 °C. The phase purity and luminescent properties of these phosphors are investigated. LaBSiO₅:Tb³⁺ phosphors show intense green emission, and LaBSiO₅ phosphors doped with Ce³⁺ show blue–violet emission under UV light excitation. LaBSiO₅ phosphors co‐doped with Ce³⁺ and Tb³⁺ exhibit blue–violet and green emission under excitation by UV light. The blue–violet emission is due to the 5d–4f transition of Ce³⁺ and the green emission is ascribed to the ⁵D₄ → ⁷ F₅ transition of Tb³⁺. The spectral overlap between the excitation band of Tb³⁺ and the emission band of Ce³⁺ supports the occurrence of energy transfer from Ce³⁺ to Tb³⁺, and the energy transfer process was investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

Emission analysis of Tb3+‐and Sm3+‐ion‐doped (Li2O/Na2O/K2O) and (Li2O + Na2O/Li2O + K2O/K2O + Na2O)‐modified borosilicate glasses

Four series of borosilicate glasses modified by alkali oxides and doped with Tb³⁺ and Sm³⁺ ions were prepared using the conventional melt quenching technique, with the chemical composition 74.5B₂O₃ + 10SiO₂ + 5MgO + R + 0.5(Tb₂O₃/Sm₂O₃) [where R = 10(Li₂O /Na₂O/K₂O) for series A and C, and R = 5(Li₂O + Na₂O/Li₂O + K₂O/K₂O + Na₂O) for series B and D]. The X‐ray diffraction (XRD) patterns of all the prepared glasses indicate their amorphous nature. The spectroscopic properties of the prepared glasses were studied by optical absorption analysis, photoluminescence excitation (PLE) and photoluminescence (PL) analysis. A green emission corresponding to the ⁵D₄ → ⁷F₅ (543 nm) transition of the Tb³⁺ ions was registered under excitation at 379 nm for series A and B glasses. The emission spectra of the Sm³⁺ ions with the series C and D glasses showed strong reddish‐orange emission at 600 nm (⁴G_5/2 →⁶H_7/2) with an excitation wavelength λ_exci = 404 nm (⁶H_5/2→⁴F_7/2). Furthermore, the change in the luminescence intensity with the addition of an alkali oxide and combinations of these alkali oxides to borosilicate glasses doped with Tb³⁺ and Sm³⁺ ions was studied to optimize the potential alkali‐oxide‐modified borosilicate glass.     

The effects of charge compensation on photoluminescence properties of a new green‐emitting ZnB2O4:Tb3+ phosphor

Charge compensation is an effective way to eliminate charge defects and improve the luminescent intensity of phosphors. In this paper, a new green‐emitting phosphor ZnB₂O₄:Tb³⁺ was prepared by solid‐state reaction at 750°C. The effects of Tb³⁺ doping content and charge compensators (Li⁺, Na⁺ or K⁺) on photoluminescence properties of ZnB₂O₄:Tb³⁺ were investigated. X‐ray powder diffraction analysis confirms the sample has cubic structure of ZnB₂O₄. The excitation and emission spectra indicate that this phosphor can be excited by near ultraviolet light at 378 nm, and exhibits bright green emission with the highest peak at 544 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺. The critical quenching concentration of Tb³⁺ in ZnB₂O₄ host is 8 mol%. The results of charge compensation show that the emission intensity can be improved by Na⁺ and K⁺. Specifically, K⁺ is the optimal one for ZnB₂O₄:Tb³⁺. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescence investigation of novel MgPbAl10O17:Tb3+ green‐emitting phosphor for solid‐state lighting

In this work, we studied the luminescence properties of Tb³⁺‐doped MgPbAl₁₀O₁₇ green phosphor. To understand the excitation mechanism and corresponding emission of the prepared phosphor, its structural, morphological and photoluminescence properties were investigated. In general, for green emission, Tb³ is used as an activator and the obtained excitation and emission spectra indicated that this phosphor can be effectively excited by a wavelength of 380 nm, and exhibits bright green emission centered at 545 nm corresponding to the f → f transition of trivalent terbium ions. The chromaticity coordinates were (C_x = 0.263, C_y = 0.723). The impact of Tb³⁺ concentration on the relative emission intensity was investigated, and the best doping concentration was found to be 2 mol%. This study suggests that Tb³⁺‐doped MgPbAl₁₀O₁₇ phosphor is a strong candidate for a green component in phosphor‐converted white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Local anesthetics noncompetitively inhibit terbium binding to the exterior surface of nerve membrane vesicles

It has previously been shown that terbium binds to membrane vesicles prepared from the walking leg nerve of the lobster (Homarus americanus) with a high affinity K_d of 2.2 μM. Fluorescence of bound Tb³⁺ occurs via energy transfer from the aromatic residues of proteins (γ_ex = 280 nm; γ_em = 546 nm), and calcium inhibits Tb³⁺ binding competitively with a K_i of 1.8 mM. Displacement studies with EDTA demonstrate that more than 95% of the bound Tb³⁺ is at the vesicle exterior and is not being taken up by the vesicles. To investigate the putative role of Ca²⁺ in the interaction of local anesthetics with axonal membranes, lidocaine and the analogs GX-HCl and QX-314 were tested as inhibitors of Tb³⁺ binding. Inhibition by lidocaine is seen only at considerably higher doses (25 mM) than are required for conduction block of intact nerves (5 mM). Inhibition by lidocaine and the primary amine analog GX-HCl is entirely noncompetitive, whereas the quaternary ammonium derivative QX-314 appears to be a mixed competitive-noncompetitive inhibitor of Tb³⁺ binding. These data are not compatible with the hypothesis that there is a functionally essential cation binding site on the axonal membrane surface for which Ca²⁺ and local anesthetics compete, although local anesthetic action may be modified indirectly by altered calcium concentrations. Evidence is presented for a mechanism by which local anesthetics indirectly displace Tb³⁺ by altering the physical state of the axonal membrane.