Quantitative trait loci mapping of heat tolerance in broccoli (<Emphasis Type="Italic">Brassica oleracea</Emphasis> var. <Emphasis Type="Italic">italica</Emphasis>) using genotyping-by-sequencing

Key message

Five quantitative trait loci and one epistatic interaction were associated with heat tolerance in a doubled haploid population of broccoli evaluated in three summer field trials.

Abstract

Predicted rising global temperatures due to climate change have generated a demand for crops that are resistant to yield and quality losses from heat stress. Broccoli (Brassica oleracea var. italica) is a cool weather crop with high temperatures during production decreasing both head quality and yield. Breeding for heat tolerance in broccoli has potential to both expand viable production areas and extend the growing season but breeding efficiency is constrained by limited genetic information. A doubled haploid (DH) broccoli population segregating for heat tolerance was evaluated for head quality in three summer fields in Charleston, SC, USA. Multiple quantitative trait loci (QTL) mapping of 1,423 single nucleotide polymorphisms developed through genotyping-by-sequencing identified five QTL and one positive epistatic interaction that explained 62.1% of variation in heat tolerance. The QTL identified here can be used to develop markers for marker-assisted selection and to increase our understanding of the molecular mechanisms underlying plant response to heat stress.

     

Biotechnological applications in in vitro plant regeneration studies of broccoli (<Emphasis Type="Italic">Brassica oleracea</Emphasis> L. var. <Emphasis Type="Italic">italica</Emphasis>), an important vegetable crop

Biotechnology holds promise for genetic improvement of important vegetable crops. Broccoli (Brassica oleracea L. var. italica) is an important vegetable crop of the family Brassicaceae. However, various biotic and abiotic stresses cause enormous crop yield losses during commercial cultivation of broccoli. Establishment of a reliable, reproducible and efficient in vitro plant regeneration system with cell and tissue culture is a vital prerequisite for biotechnological application of crop improvement programme. An in vitro plant regeneration technique refers to culturing, cell division, cell multiplication, de-differentiation and differentiation of cells, protoplasts, tissues and organs on defined liquid/solid medium under aseptic and controlled environment. Recent progress in the field of plant tissue culture has made this area one of the most dynamic and promising in experimental biology. There are many published reports on in vitro plant regeneration studies in broccoli including direct organogenesis, indirect organogenesis and somatic embryogenesis. This review summarizes those plant regeneration studies in broccoli that could be helpful in drawing the attention of the researchers and scientists to work on it to produce healthy, biotic and abiotic stress resistant plant material and to carry out genetic transformation studies for the production of transgenic plants.     

Biotechnological advancement in genetic improvement of broccoli (<Emphasis Type="Italic">Brassica oleracea</Emphasis> L. var. <Emphasis Type="Italic">italica</Emphasis>), an important vegetable crop

With the advent of molecular biotechnology, plant genetic engineering techniques have opened an avenue for the genetic improvement of important vegetable crops. Vegetable crop productivity and quality are seriously affected by various biotic and abiotic stresses which destabilize rural economies in many countries. Moreover, absence of proper post-harvest storage and processing facilities leads to qualitative and quantitative losses. In the past four decades, conventional breeding has significantly contributed to the improvement of vegetable yields, quality, post-harvest life, and resistance to biotic and abiotic stresses. However, there are many constraints in conventional breeding, which can only be overcome by advancements made in modern biology. Broccoli (Brassica oleracea L. var. italica) is an important vegetable crop, of the family Brassicaceae; however, various biotic and abiotic stresses cause enormous crop yield losses during the commercial cultivation of broccoli. Thus, genetic engineering can be used as a tool to add specific characteristics to existing cultivars. However, a pre-requisite for transferring genes into plants is the availability of efficient regeneration and transformation techniques. Recent advances in plant genetic engineering provide an opportunity to improve broccoli in many aspects. The goal of this review is to summarize genetic transformation studies on broccoli to draw the attention of researchers and scientists for its further genetic advancement.     

Mapping of genetic locus for leaf trichome in <Emphasis Type="Italic">Brassica oleracea</Emphasis>

Key message

The genetic locus for leaf trichome was identified via marker-based mapping and SNP microarray assay, and a functional marker was developed to facilitate the breeding for hairiness in Brassica oleracea.

Abstract

Plant trichomes are involved in various functions particularly in protecting plants against some biotic and abiotic damages. In the present study, an F2 segregating population was developed from the cross between a glabrous cultivated B. oleracea (CC, 2n = 18) and a hairy wild relative, B. incana (CC, 2n = 18). A 1:3 segregation pattern between glabrous and hairy plants was detected among 1063 F2 genotypes, and the locus for hairiness was mapped in a 4.3-cM genetic region using 267 SSR markers among 149 F2 genotypes, corresponding to a 17.6-Mb genomic region on chromosome C01. To narrow the genetic region for hairiness, the Brassica 60 K SNP Bead Chip Arrays were applied to genotype 64 glabrous and 30 hairy F2 plants, resulting in a 1.04-Mb single peak region located in the 17.6-Mb interval. A candidate gene, BoTRY, was identified by qRT-PCR which revealed significant higher expression in glabrous F2 genotypes as compared with that in hairy plants. A cleaved amplified polymorphic site marker was successfully developed to distinguish the sequence variations of BoTRY between hairy and glabrous plants. Our study will be helpful for molecular breeding for hairiness in B. oleracea.

     

Production and genetic characterization of somatic hybrids between leaf mustard (<Emphasis Type="Italic">Brassica juncea</Emphasis>) and broccoli (<Emphasis Type="Italic">Brassica oleracea</Emphasis>)

Inter-specific somatic hybrids of leaf mustard (Brassica juncea) and broccoli (Brassica oleracea) were established to introduce cytoplasmic male sterility (CMS) and Verticillium dahliae Kleb. resistance from broccoli to leaf mustard. Protoplasts isolated from hypocotyls and cotyledons of inbred lines of leaf mustard and broccoli were fused using 40% (w/v) polyethelene glycol and then cultured in modified k8p medium supplemented with 0.2 mg/l 2,4-dichlorophenoxi-acetic acid, 0.5 mg/l 6-benzyladenine (BA), 0.1 mg/l naphthaleneacetic acid (NAA), and 0.1 mg/l kinetin (Kin), and 0.4 M mannitol as osmoticum. At the eight- to ten-cell stage, divided cells were transferred to Kao’s basal medium supplemented with 0.3 M sucrose as carbon source and 0.1% agarose, 2 mg/l BA, 2 mg/l zeatin (ZEA), 1 mg/l NAA, and 0.5 mg/l Kin for callus proliferation. After 35 d, when small calli reached 2–3 mm in diameter, calli were transferred to regeneration medium containing 5 mg/l ZEA and 2 mg/l indole-3-acetic acid. The chromosome numbers of putative somatic hybrids varied from 46 to 54. A total of ten plants showed a 0.5-kb, CMS-specific band, while two regenerated plants showed a missing band similar to that of leaf mustard by polymerase chain reaction amplification using Ogura CMS-specific primers. Hybrid state was confirmed by random amplified polymorphic DNA analysis. Regenerated plants had normal petals and stamens, but only two plants produced pollen and set seed.     

Callus induction and plant regeneration from broccoli (<Emphasis Type="Italic">Brassica oleracea</Emphasis> var. italica) for transformation

We evaluated the efficiency of callus induction and plantlet regeneration from hypocotyl explants of broccoli (Brassica oleracea var. italica). The cultivars were ‘Marathon’, ‘Greenbelt’, and ‘Shogun’. Transformation success was not affected by the presence of tobacco feeder-cell layers on the culture media. The frequency of shoot regeneration was greater from 10-d-old hypocotyls than from 14-d-old hypocotyls. Both ‘Marathon’ and ‘Greenbelt’ had higher potentials for tissue regeneration than did ‘Shogun’. We found that for transformation selection, the optimum concentration was either 50 mg/L kanamycin or 100 mg/L genetkin.     

Genome-wide characterization and stress-responsive expression profiling of <Emphasis Type="Italic">MCM</Emphasis> genes in <Emphasis Type="Italic">Brassica oleracea</Emphasis> and <Emphasis Type="Italic">Brassica rapa</Emphasis>

The Minichromosome maintenance protein [MCM (2-7)] complex is associated with helicase activity for replication fork formation during DNA replication. We identified and characterized each 12 putative MCM genes from Brassica oleracea and Brassica rapa. MCM genes were classified into nine groups according to their evolutionary relationships. A high number of syntenic regions were present on chromosomes C03 and A03 in B. oleracea and B. rapa, respectively, compared to the other chromosomes. Expression analysis showed that most of the MCM(2-7) helicase-subunit genes and their coregulating MCM genes were upregulated during hydroxyurea (HU) induced stress in B. oleracea. In B. rapa, MCM(2-7) helicase genes BrMCM2_2, BrMCM7_1, BrMCM7_2 and their co-regulating genes were upregulated during replication stress. During cold stress, BoMCM6 in B. oleracea and BrMCM5 in B. rapa were remarkably upregulated. During salt stress, BoMCM6_2, BoMCM7_1, BoMCM8, BoMCM9, and BoMCM10 were markedly upregulated in B. oleracea. Hence, our study identified the candidate MCM family genes those possess abiotic stress-responsive behavior and DNA replication stress tolerance. As the first genome-wide analysis of MCM genes in B. oleracea and B. rapa, this work provides a foundation to develop stress responsive plants. Further functional and molecular studies on MCM genes will be helpful to enhance stress tolerance in plants.     

White cabbage (<Emphasis Type="Italic">Brassica oleracea</Emphasis> var. <Emphasis Type="Italic">capitata</Emphasis> f. <Emphasis Type="Italic">alba</Emphasis>): botanical,phytochemical and pharmacological overview

White cabbage (Brassica oleraceae var. capitata f. alba) is a cruciferous vegetable used worldwide as a food and in traditional medicine. Due to its common availability in local markets, affordability, and consumer preference, it represents a significant source of phytonutrients in the human diet. This review provides an overview of white cabbage origin, taxonomy, geographical distribution, botanical characteristics, and contemporary and traditional uses, as well as its phytochemicals and pharmacology. Special emphasis is placed on a health-promoting phytochemicals such as glucosinolates, polyphenols, and vitamins, as well as anticancerogenic, antioxidant, anti-inflamantory and cardioprotective effects. The majority of so far published research on white cabbage was focused on qualitative determination of phytochemicals (targeted analysis), while only few recent papers published data based on untargeted metabolomic profiling. Hence, this review discusses and emphasizes a further need of studying the white cabbage phytochemicals using modern metabolomics platforms which will enable scientists to pinpoint the exact bioactive metabolites which are responsible for certain bioactivity.     

Identification of non-TIR-NBS-LRR markers linked to the <Emphasis Type="Italic">Pl5</Emphasis>/<Emphasis Type="Italic">Pl8</Emphasis> locus for resistance to downy mildew in sunflower

The resistance of sunflower, Helianthus annuus L., to downy mildew, caused by Plasmopara halstedii, is conferred by major genes denoted by Pl. Using degenerate and specific primers, 16 different resistance gene analogs (RGAs) have been cloned and sequenced. Sequence comparison and Southern-blot analysis distinguished six classes of RGA. Two of these classes correspond to TIR-NBS-LRR sequences while the remaining four classes correspond to the non-TIR-NBS-LRR type of resistance genes. The genetic mapping of these RGAs on two segregating F2 populations showed that the non-TIR-NBS-LRR RGAs are clustered and linked to the Pl5/ Pl8 locus for resistance to downy mildew in sunflower. These and other results indicate that different Pl loci conferring resistance to the same pathogen races may contain different sequences.     

Identification of NBS-encoding genes linked to black rot resistance in cabbage (<Emphasis Type="Italic">Brassica oleracea</Emphasis> var. <Emphasis Type="Italic">capitata</Emphasis>)

Heading cabbage is a nutritionally rich and economically important cruciferous vegetable. Black rot disease, caused by the bacterium Xanthomonas campestris pv. campestris, reduces both the yield and quality of the cabbage head. Nucleotide binding site (NBS)-encoding resistance (R) genes play a vital role in the plant immune response to various pathogens. In this study, we analyzed the expression and DNA sequence variation of 31 NBS-encoding genes in cabbage (Brassica oleracea var. capitata). These genes encoded TIR, NBS, LRR and RPW8 protein domains, all of which are known to be involved in disease resistance. RNA-seq revealed that these 31 genes were differentially expressed in leaf, root, silique, and stem tissues. Furthermore, qPCR analyses revealed that several of these genes were more highly expressed in resistant compared to susceptible cabbage lines, including Bol003711, Bol010135, Bol010559, Bol022784, Bol029866, Bol042121, Bol031422, Bol040045 and Bol042095. Further analysis of these genes promises to yield both practical benefits, such as molecular markers for marker-assisted breeding, and fundamental insights to the mechanisms of resistance to black rot in cabbage.     

Distribution pattern of antioxidants in white cabbage heads (<Emphasis Type="Italic">Brassica oleracea</Emphasis> L. var. <Emphasis Type="Italic">capitata</Emphasis> f. <Emphasis Type="Italic">alba</Emphasis>)

The aim of this paper has been to investigate the occurrence of health-promoting antioxidants, such as vitamins C and E as well as antioxidative enzymes, e.g. superoxide dismutase, catalase and peroxidase in different parts of the cabbage head (the outer one green leaves, the central leaf layer and the inner layer young, etiolated leaves). Vitamin C content in both the central (209 mg/dm³) and inner (202 mg/dm³) layers of cabbage heads was higher in comparison to the outer one (163 mg/dm³), while vitamin E content (α-tocopherol) in the outer layer (4 μg/g FW) was higher by about 26 and 34% in comparison to the central and inner layers, respectively. The cooperation between vitamins and enzymatic antioxidants led to the highest H₂O₂ level in the outer layer, while the O₂^·− level was the highest in the inner part of the cabbage head. We conclude that leaf layers in cabbage heads reflect the different potential of bioactive compounds accumulation, related to the stage of tissue development, as well as tissue-specific stress response.     

Production of interspecific somatic hybrids between tuber mustard (<Emphasis Type="Italic">Brassica</Emphasis><Emphasis Type="Italic">juncea</Emphasis>) and red cabbage (<Emphasis Type="Italic">Brassica oleracea</Emphasis>)

In the present investigation, the interspecific somatic hybridization between tuber mustard and red cabbage was established in order to introduce valuable genes from red cabbage (Brassica oleracea) into Brassica juncea. Prior to fusion treatment, protoplasts of red cabbage were inactivated with 2 mM iodoacetamide to inhibit cell division. Micro-calluses were obtained at a frequency of 10.3% after approximately 5 weeks culture following protoplast fusion. Some of the fusion-derived calluses possessed red pigmented cells after being transferred to proliferation medium, and they were presumably considered to be somatic hybrid cell lines. Plantlets were regenerated from 12 cell lines, of which nine plantlets exhibited characteristics intermediate of both parents in terms of plant morphology. With the exception of common protein bands featured by two parents, there were unique banding patterns produced in the hybrids by using SDS-PAGE analysis. By chromosome countings, it was showed that they ranged approximately from 2n=30 to 42 in chromosome numbers. Their hybridity were further confirmed by RAPD analysis revealing that genes of both parents were partially incorporated into the hybrids. Positively, all these hybrids were capable of seed-setting. The pod-setting was 4.2 in somatic hybrid H₇ when backcrossed with tuber mustard.     

Genetics and fine mapping of a yellow-green leaf gene (<Emphasis Type="Italic">ygl</Emphasis>-<Emphasis Type="Italic">1</Emphasis>) in cabbage (<Emphasis Type="Italic">Brassica oleracea</Emphasis> var. <Emphasis Type="Italic">capitata</Emphasis> L.)

Cabbage (Brassica oleracea var. capitata L.) is one of the most popular cultivated vegetables worldwide. Cabbage has rich phenotypic diversity, including plant height, head shape, head color, leaf shape and leaf color. Leaf color plays an important role in cabbage growth and development. At present, there are few reports on fine mapping of leaf color mutants in B. oleracea. In this study, a naturally occurring yellow-green leaf cabbage mutant (YL-1), derived from the self-pollinated progenies of the hybrid ‘Hosom’, was used for inheritance analysis and gene mapping. Segregation populations including F₂ and BC₁ were generated from the cross of two inbred lines, YL-1 and 01–20. Genetic analysis with the F₂ and BC₁ populations demonstrated that the yellow-green leaf color was controlled by a single recessive nuclear gene, ygl-1. Insertion–deletion (InDel) markers, designed based on the parental re-sequencing data, were used for the preliminary mapping with BSA (bulked segregant analysis) method. A genetic map constructed with 15 InDels indicated that ygl-1 was located on chromosome C01. The ygl-1 gene is flanked by InDel markers ID2 and M8, with genetic distances of 0.4 cM and 0.35 cM, respectively. The interval distance between two markers is 167 kb. Thus, it enables us to locate the ygl-1 gene for the first time in B. oleracea. This study lays the foundation for candidate gene prediction and ygl-1gene cloning.     

Mapping and characterization of <Emphasis Type="Italic">FLC</Emphasis> homologs and QTL analysis of flowering time in <Emphasis Type="Italic">Brassica oleracea</Emphasis>

The FLC gene product is an inhibitor of flowering in Arabidopsis. FLC homologs in Brassica species are thought to control vernalization. We cloned four FLC homologs (BoFLCs) from Brassica oleracea. Three of these, BoFLC1, BoFLC3 and BoFLC5, have been previously characterized. The fourth novel sequence displayed 98% sequence homology to the previously identified gene BoFLC4, but also showed 91% homology to BrFLC2 from Brassica rapa. Phylogenetic analysis showed that this clone belongs to the FLC2 clade. Therefore, we designated this gene BoFLC2. Based on the segregation of RFLP, SRAP, CAPS, SSR and AFLP loci, a detailed linkage map of B. oleracea was constructed in the F₂ progeny obtained from a cross of B. oleracea cv. Green Comet (broccoli; non-vernalization type) and B. oleracea cv. Reiho (cabbage; vernalization type), which covered 540 cM, 9 major linkage groups. Six quantitative trait loci (QTL) controlling flowering time were detected. BoFLC1, BoFLC3 and BoFLC5 were not linked to the QTLs controlling flowering time. However, the largest QTL effect was located in the region where BoFLC2 was mapped. Genotyping of F₂ plants at the BoFLC2 locus showed that most of the early flowering plants were homozygotes of BoFLC-GC, whereas most of the late- and non-flowering plants were homozygotes of BoFLC-Rei. The BoFLC2 homologs present in plants of the non-vernalization type were non-functional, due to a frameshift in exon 4. Moreover, duplications and deletions of BoFLC2 were detected in broccoli and a rapid cycling line, respectively. These results suggest that BoFLC2 contributes to the control of flowering time in B. oleracea.     

Microspore culture protocol for Indonesian <Emphasis Type="Italic">Brassica oleracea</Emphasis>

A microspore culture protocol for Brassica oleracea of Indonesian origin (cv. ‘Kemeh’) has been successfully established. A high number of embryos formed with high microspore density i.e. 15 × 10⁴ cells/ml. Embryo formation was improved by using flower buds (4.5–4.6 mm in length) as explants, a temperature treatment at 30.5°C for 48 h and then transfer to 25°C continuously until embryos formed. A total of 295 embryos were obtained from 189 buds, 30% of which were abnormal (i.e. with an abnormal cotyledon or lacking hypocotyls). All normal embryos that grew and survived, 165 in total, were successfully transferred to soil and grew well in plastic bags (15 cm in diameter) containing a mixture of burned-rice husk and organic manure (1:1, v/v).     

Effects of plant genotype and bacterial strain on <Emphasis Type="Italic">Agrobacterium tumefaciens</Emphasis>-mediated transformation of <Emphasis Type="Italic">Brassica oleracea</Emphasis> L. var. <Emphasis Type="Italic">capitata</Emphasis>

Two inbred lines of Brassica oleracea L. var. capitata were transformed with two Agrobacterium tumefaciens strains harboring resistance to herbicide Basta: AGL1/pDM805 and LBA4404/pGKB5 (LB5-1). Inoculated cotyledons and hypocotyls provided equally good explants and manifested a high percentage of shoot regeneration on MS medium supplemented with 1 mg/l benzyladenine and 0.5 mg/l indole-3-butyric acid. The P₃₄I₅ genotype was superior to P₂₂I₅ in shoot regeneration (48.1 vs. 26.9%), multiplication, and acclimation in the greenhouse (76 vs. 40%). A. tumefaciens AGL1/pDM805 provided more regenerated shoots per explant, especially in the case of cotyledon explants, and the higher transformation rate (up to 35% vs. up to 12%) as compared to LB5-1. Putative transformants survived spraying with 10–30 mg/l phosphinothricin. Transformation was confirmed by GUS assay and PCR analysis in T0 and T1 generations. Published in Russian in Fiziologiya Rastenii, 2007, vol. 54, No. 5, pp. 738–743. The text was submitted by the authors in English.     

Induction and origin of adventitious shoots from chimeras of <Emphasis Type="Italic">Brassica juncea</Emphasis> and <Emphasis Type="Italic">Brassica oleracea</Emphasis>

The chimeras between tuber mustard (Brassica juncea) and red cabbage (B. oleracea) were artificially synthesized in our previous study. Adventitious shoots were induced from nodal segments and leaf discs of TCC (LI-LII-LIII, LI -the outmost layer of shoot apical meristem; LII -the middle layer; LIII -the innermost layer. T = Tuber mustard, C = Red cabbage) chimeras. The origin of the shoots was analyzed by histology and molecular biology. As a result, the frequency of adventitious shoot induction rose with the increase of BA in MS medium in the area of the nodes. However, there was no different induction frequency of adventitious shoots from nodal segment bases in media with different BA concentrations. Most adventitious shoots (clustered shoots) arising from the node area were TTT (Tuber mustard- Tuber mustard- Tuber mustard) and only 4 shoots were chimeras, which indicated that more shoots originated from LI than from LII and LIII. All shoots from nodal segment bases were CCC (Red cabbage-Red cabbage- Red cabbage), indicating that the shoots originated from LII or LII and LIII. There were significant differences in the regeneration rate in the margin of the leaf discs among the three combinations of BA and NAA. Most adventitious shoots from the margin of leaf discs were CCC but 2 out of 70 were chimeras, which indicated that more shoots originated from LII or LII and LIII than from LI. All chimeras obtained by regeneration were different from the original explant donor in type in the present study. The origin of the adventitious shoots varied with the site of origin on the donor plant, and could be multicellular and multihistogenic.     

<Emphasis Type="Italic">Rpv10</Emphasis>: a new locus from the Asian <Emphasis Type="Italic">Vitis</Emphasis> gene pool for pyramiding downy mildew resistance loci in grapevine

A population derived from a cross between grapevine breeding strain Gf.Ga-52-42 and cultivar ‘Solaris’ consisting of 265 F1-individuals was genetically mapped using SSR markers and screened for downy mildew resistance. Quantitative trait locus (QTL) analysis revealed two strong QTLs on linkage groups (LGs) 18 and 09. The locus on LG 18 was found to be identical with the previously described locus Rpv3 and is transmitted by Gf.Ga-52-42. ‘Solaris’ transmitted the resistance-related locus on LG 09 explaining up to 50% of the phenotypic variation in the population. This downy mildew resistance locus is named Rpv10 for resistance to Plasmopara viticola. Rpv10 was initially introgressed from Vitis amurensis, a wild species of the Asian Vitis gene pool. The one-LOD supported confidence interval of the QTL spans a section of 2.1 centi Morgan (cM) corresponding to 314 kb in the reference genome PN40024 (12x). Eight resistance gene analogues (RGAs) of the NBS–LRR type and additional resistance-linked genes are located in this region of PN40024. The F1 sub-population which contains the Rpv3 as well as the Rpv10 locus showed a significantly higher degree of resistance, indicating additive effects by pyramiding of resistance loci. Possibilities for using the resistance locus Rpv10 in a grapevine breeding programme are discussed. Furthermore, the marker data revealed ‘Severnyi’ × ‘Muscat Ottonel’ as the true parentage for the male parent of ‘Solaris’.     

Acclimation of photosynthesis to temperature in <Emphasis Type="Italic">Arabidopsis thaliana</Emphasis> and <Emphasis Type="Italic">Brassica oleracea</Emphasis>

Plants differ in how much the response of net photosynthetic rate (P _N) to temperature (T) changes with the T during leaf development, and also in the biochemical basis of such changes in response. The amount of photosynthetic acclimation to T and the components of the photosynthetic system involved were compared in Arabidopsis thaliana and Brassica oleracea to determine how well A. thaliana might serve as a model organism to study the process of photosynthetic acclimation to T. Responses of single-leaf gas exchange and chlorophyll fluorescence to CO₂ concentration measured over the range of 10–35 °C for both species grown at 15, 21, and 27 °C were used to determine the T dependencies of maximum rates of carboxylation (V_Cmax), photosynthetic electron transport (J_max), triose phosphate utilization rate (TPU), and mesophyll conductance to carbon dioxide (g’_m). In A. thaliana, the optimum T of P _N at air concentrations of CO₂ was unaffected by this range of growth T, and the T dependencies of V_Cmax, J_max, and g’_m were also unaffected by growth T. There was no evidence of TPU limitation of P _N in this species over the range of measurement conditions. In contrast, the optimum T of P _N increased with growth T in B. oleracea, and the T dependencies of V_Cmax, J_max, and g’_m, as well as the T at which TPU limited P _N all varied significantly with growth T. Thus B. oleracea had much a larger capacity to acclimate photosynthetically to moderate T than did A. thaliana.