3D‐Printed Conical Arrays of TiO2 Electrodes for Enhanced Photoelectrochemical Water Splitting

Control over the topography of semiconducting materials can lead to enhanced performances in photoelectrochemical related applications. One means of implementing this is through direct patterning of metal‐based substrates, though this is inadequately developed. Conventional techniques for patterned fabrication commonly involve technologically demanding and tedious processes. 3D printing, a form of additive fabrication, enables creation of a 3D object by deposition of successive layers of material via computer control. In this work, the feasibility of fabricating metal‐based 3D printed photoelectrodes is explored. Electrodes comprised of conical arrays are fabricated and the performance for photoelectrochemical water splitting is further enhanced by the direct growth of TiO2 nanotubes on this platform. 3D metal printing provides a flexible and versatile approach for the design and fabrication of novel electrode structures.     

Micropatterned cell cultures on elastic membranes as an in vitro model of myocardium

We describe here a new in vitro protocol for structuring cardiac cell cultures to mimic important aspects of the in vivo ventricular myocardial phenotype by controlling the location and mechanical environment of cultured cells. Microlithography is used to engineer microstructured silicon metal wafers. Those are used to fabricate either microgrooved silicone membranes or silicone molds for microfluidic application of extracellular matrix proteins onto elastic membranes (involving flow control at micrometer resolution). The physically or microfluidically structured membranes serve as a cell culture growth substrate that supports cell alignment and allows the application of stretch. The latter is achieved with a stretching device that can deliver isotropic or anisotropic stretch. Neonatal ventricular cardiomyocytes, grown on these micropatterned membranes, develop an in vivo-like morphology with regular sarcomeric patterns. The entire process from fabrication of the micropatterned silicon metal wafers to casting of silicone molds, microfluidic patterning and cell isolation and seeding takes approximately 7 days.     

Flexible and Stretchable Biobatteries: Monolithic Integration of Membrane‐Free Microbial Fuel Cells in a Single Textile Layer

The fabrication and performance of a flexible and stretchable microbial fuel cell (MFC) monolithically integrated into a single sheet of textile substrate are reported. The single‐layer textile MFC uses Pseudomonas aeruginosa (PAO1) as a biocatalyst to produce a maximum power of 6.4 µW cm^?2 and current density of 52 µA cm^?2, which are substantially higher than previous textile‐MFCs and are similar to other flexible paper‐based MFCs. The textile MFC demonstrates a stable performance with repeated stretching and twisting cycles. The membrane‐less single‐chamber configuration drastically simplifies the fabrication and improves the performance of the MFC. A conductive and hydrophilic anode in a 3D fabric microchamber maximizes bacterial electricity generation from a liquid environment and a silver oxide/silver solid‐state cathode reduces cathodic overpotential for fast catalytic reaction. A simple batch fabrication approach simultaneously constructs 35 individual devices, which will revolutionize the mass production of textile MFCs. This stretchable and twistable power device printed directly onto a single textile substrate can establish a standardized platform for textile‐based biobatteries and will be potentially integrated into wearable electronics in the future.     

Plasma Lithography Surface Patterning for Creation of Cell Networks

Systematic manipulation of a cell microenvironment with micro- and nanoscale resolution is often required for deciphering various cellular and molecular phenomena. To address this requirement, we have developed a plasma lithography technique to manipulate the cellular microenvironment by creating a patterned surface with feature sizes ranging from 100 nm to millimeters. The goal of this technique is to be able to study, in a controlled way, the behaviors of individual cells as well as groups of cells and their interactions.This plasma lithography method is based on selective modification of the surface chemistry on a substrate by means of shielding the contact of low-temperature plasma with a physical mold. This selective shielding leaves a chemical pattern which can guide cell attachment and movement. This pattern, or surface template, can then be used to create networks of cells whose structure can mimic that found in nature and produces a controllable environment for experimental investigations. The technique is well suited to studying biological phenomenon as it produces stable surface patterns on transparent polymeric substrates in a biocompatible manner. The surface patterns last for weeks to months and can thus guide interaction with cells for long time periods which facilitates the study of long-term cellular processes, such as differentiation and adaption. The modification to the surface is primarily chemical in nature and thus does not introduce topographical or physical interference for interpretation of results. It also does not involve any harsh or toxic substances to achieve patterning and is compatible for tissue culture. Furthermore, it can be applied to modify various types of polymeric substrates, which due to the ability to tune their properties are ideal for and are widely used in biological applications. The resolution achievable is also beneficial, as isolation of specific processes such as migration, adhesion, or binding allows for discrete, clear observations at the single to multicell level.This method has been employed to form diverse networks of different cell types for investigations involving migration, signaling, tissue formation, and the behavior and interactions of neurons arraigned in a network.     

Label-free Isolation and Enrichment of Cells Through Contactless Dielectrophoresis

Dielectrophoresis (DEP) is the phenomenon by which polarized particles in a non-uniform electric field undergo translational motion, and can be used to direct the motion of microparticles in a surface marker-independent manner. Traditionally, DEP devices include planar metallic electrodes patterned in the sample channel. This approach can be expensive and requires a specialized cleanroom environment. Recently, a contact-free approach called contactless dielectrophoresis (cDEP) has been developed. This method utilizes the classic principle of DEP while avoiding direct contact between electrodes and sample by patterning fluidic electrodes and a sample channel from a single polydimethylsiloxane (PDMS) substrate, and has application as a rapid microfluidic strategy designed to sort and enrich microparticles. Unique to this method is that the electric field is generated via fluidic electrode channels containing a highly conductive fluid, which are separated from the sample channel by a thin insulating barrier. Because metal electrodes do not directly contact the sample, electrolysis, electrode delamination, and sample contamination are avoided. Additionally, this enables an inexpensive and simple fabrication process.cDEP is thus well-suited for manipulating sensitive biological particles. The dielectrophoretic force acting upon the particles depends not only upon spatial gradients of the electric field generated by customizable design of the device geometry, but the intrinsic biophysical properties of the cell. As such, cDEP is a label-free technique that avoids depending upon surface-expressed molecular biomarkers that may be variably expressed within a population, while still allowing characterization, enrichment, and sorting of bioparticles.Here, we demonstrate the basics of fabrication and experimentation using cDEP. We explain the simple preparation of a cDEP chip using soft lithography techniques. We discuss the experimental procedure for characterizing crossover frequency of a particle or cell, the frequency at which the dielectrophoretic force is zero. Finally, we demonstrate the use of this technique for sorting a mixture of ovarian cancer cells and fluorescing microspheres (beads).     

Tunable Free‐Standing Ultrathin Porous Nickel Film for High Performance Flexible Nickel–Metal Hydride Batteries

The nickel matrix has a significant impact on the structure and performance of a nickel–metal hydride (NiMH) battery. However, few studies have focused on the nickel matrix thus far due to the difficulty of fabricating controllable porous nickel materials. In addition, conventional nickel matrices show poor flexibility, making it difficult to fabricate flexible NiMH batteries. To achieve a high performance flexible NiMH battery, the fabrication of a thin, free‐standing, and flexible nickel matrix with an optimized pore structure is a key prerequisite. Here, a novel flexible porous nickel matrix with a controllable pore size, density, and distribution of pore position is developed by nickel electrodeposition on templates that are produced by silkscreen printing different insulating ink microarrays on stainless steel sheets. Benefitting from the excellent structure of the porous nickel matrix, flexible NiMH batteries are fabricated, which show excellent flexibility and very high energy densities of 151.8 W h kg^?1 and 508.5 W h L^?1 as well as high energy efficiencies of 87.9–98.5%. These batteries outperform conventional NiMH batteries and many other commercial batteries, holding great promise for their future practical application. The present strategy provides a new route to promote the development of nickel‐based alkaline rechargeable batteries.     

1H nuclear magnetic resonance assay of erythrocyte triosephosphate isomerase

A direct method for measuring the activity of erythrocyte triosephosphate isomerase using 1H NMR spectroscopy was developed. NMR spectroscopy allows the simultaneous monitoring of the substrate and the product of the reaction by virtue of the differences in the NMR spectrum of each chemical species. The assay conditions were based on a modification of a conventional spectrophotometric method. The enzymatic activity measured using NMR gave results comparable to those obtained in a standard assay. The results were used in the kinetic characterization of triosephosphate isomerase in hemolysates from subjects with homozygous or heterozygous deficiency of the enzyme. In general, NMR spectroscopy has the potential for wide application in the rapid development of new enzyme assays.     

Enriching libraries of high-aspect-ratio micro- or nanostructures by rapid, low-cost, benchtop nanofabrication

We provide a protocol for transforming the structure of an array of high-aspect-ratio (HAR) micro/nanostructures into various new geometries. Polymeric HAR arrays are replicated from a Bosch-etched silicon master pattern by soft lithography. By using various conditions, the original pattern is coated with metal, which acts as an electrode for the electrodeposition of conductive polymers, transforming the original structure into a wide range of user-defined new designs. These include scaled replicas with sub-100-nm-level control of feature sizes and complex 3D shapes such as tapered or bent columnar structures bearing hierarchical features. Gradients of patterns and shapes on a single substrate can also be produced. This benchtop fabrication protocol allows the production of customized libraries of arrays of closed-cell or isolated HAR micro/nanostructures at a very low cost within 1 week, when starting from a silicon master that otherwise would be very expensive and slow to produce using conventional fabrication techniques.     

Fabrication of Mechanically Tunable and Bioactive Metal Scaffolds for Biomedical Applications

Biometal systems have been widely used for biomedical applications, in particular, as load-bearing materials. However, major challenges are high stiffness and low bioactivity of metals. In this study, we have developed a new method towards fabricating a new type of bioactive and mechanically reliable porous metal scaffolds-densified porous Ti scaffolds. The method consists of two fabrication processes, 1) the fabrication of porous Ti scaffolds by dynamic freeze casting, and 2) coating and densification of the porous scaffolds. The dynamic freeze casting method to fabricate porous Ti scaffolds allowed the densification of porous scaffolds by minimizing the chemical contamination and structural defects. The densification process is distinctive for three reasons. First, the densification process is simple, because it requires a control of only one parameter (degree of densification). Second, it is effective, as it achieves mechanical enhancement and sustainable release of biomolecules from porous scaffolds. Third, it has broad applications, as it is also applicable to the fabrication of functionally graded porous scaffolds by spatially varied strain during densification.     

Building Interfacial Nanostructures by Size-Controlled Chemical Etching

Development of soft chemical processes for the synthesis of interfacial architectures with well-defined structural nano-motifs organized over large areas in two dimensions is an important branch of nanotechnology. The present study deals with the fabrication of gold nanostructures using size-selective chemical etching of continuous gold films on glass support with titanium and chromium adhesive layers. In this process, which is called self-passivated surface etching, a gold film is etched in the presence of citric acid, resulting in gold nanostructures adhering to the metal support. The size-controlled chemical dissolution of gold is driven by a competing reaction between self-organized passivation of surface nano-motifs by citric acid shells and soft etching by a nonoxidative composition containing hydrochloric acid and hydrogen peroxide in water. According to these results, the presence of a chemically stable adhesive layer (titanium), citric acid in solution, and agitation are critical factors to be considered. However, the nature of the adhesive layer is the most influential factor. The following technique presents a simple method for the rapid fabrication of a nanostructured gold substrate that has the ability to support both propagating and localized surface plasmon resonances simultaneously.     

Two-step cell patterning on planar and complex curved surfaces by precision spraying of polymers

Controlling adhesion of living animal cells plays a key role in biosensor fabrication, drug-testing technologies, basic biological research, and tissue engineering applications. Current techniques for cell patterning have two primary limitations: (1) they require photolithography, and (2) they are limited to patterning of planar surfaces. Here we demonstrate a simple, precision spraying method for both positive and negative patterning of planar and curved surfaces to achieve cell patterns rapidly and reproducibly. In this method, which we call precision spraying (PS), a polymer solution is aerosolized, focused with sheath airflow through an orifice, and deposited on the substrate using a deposition head to create approximately 25 microm sized features. In positive patterning, adhesive molecules, such as laminin or polyethylenimine (PEI) were patterned on polydimethylsiloxane (PDMS) substrates in a single spraying operation. A variety of animal cell types were found to adhere to the adhesive regions, and avoid the non-adhesive (bare PDMS) regions. In negative patterning, hydrophobic materials, such as polytetrafluoroethylene (PTFE) and PDMS, were patterned on glass substrates. Cells then formed patterns on the exposed glass regions and avoided the hydrophobic regions. Cellular patterns were maintained for up to 2 weeks in the presence of serum, which normally fouls non-adhesive regions. Additionally, we found that precision spraying enabled micropatterning of complex-curved surfaces. Our results show that precision spraying followed by cell plating enables rapid and flexible cellular micropatterning in two simple steps.     

Fully Plastic Dye Solar Cell Devices by Low‐Temperature UV‐Irradiation of both the Mesoporous TiO2 Photo‐ and Platinized Counter‐Electrodes

The application of UV irradiation processes are successfully proposed for the first time in the fabrication of both of the two plastic electrodes in flexible dye solar cells (DSCs) and modules. For the realization of the photo‐electrode, a customized TiO₂ paste formulation and UV processing method was developed which yields 134% (48%) performance enhancement with respect to the same (binder‐free) paste treated at 120 °C. UV treatment induces both complete removal of organic media and more efficient charge collection. Significantly, highly catalytic platinized flexible counter‐electrodes are also obtained via UV photo‐induced reduction of screen‐printed platinum precursor pastes based on hexachloroplatinic acid. Using both UV‐processed electrodes, a fully plastic DSC is fabricated with a conversion efficiency of 4.3% under 1 Sun (semitransparent) and 5.3% under 0.2 Sun (opaque). Performance is within 10% of the efficiency of a glass‐based DSC prepared with the same materials but with conventional high temperature processes. The material formulations and processes are simple, and easily up‐scaled over large areas, even directly and simultaneously applicable to the preparation of both the photo‐and counter‐electrode on the same substrate which enabled us to demonstrate the first module on plastic realized with a W series interconnection.     

Nanomoulding of Functional Materials,a Versatile Complementary Pattern Replication Method to Nanoimprinting

We describe a nanomoulding technique which allows low-cost nanoscale patterning of functional materials, materials stacks and full devices. Nanomoulding combined with layer transfer enables the replication of arbitrary surface patterns from a master structure onto the functional material. Nanomoulding can be performed on any nanoimprinting setup and can be applied to a wide range of materials and deposition processes. In particular we demonstrate the fabrication of patterned transparent zinc oxide electrodes for light trapping applications in solar cells.     

Stable and Highly Efficient PbS Quantum Dot Tandem Solar Cells Employing a Rationally Designed Recombination Layer

This study reports the fabrication of stable, high‐performance, simple structured tandem solar cells based on PbS colloidal quantum dots (CQDs) under ambient air. This study also reveals detailed device engineering to deposit each functional layer in the subcells at low temperature to avoid damage to the PbS CQDs and meanwhile makes the fabrication process compatible to flexible plastic substrate. Two efficient recombination layers (RLs) are rationally designed to connect the two subcells in series. The use of solution‐processed RL with an organic PEDOT:PSS (poly(3,4‐ethylenedioxythiophene): polystyrene sulfonate) interlayer leads to the fabrication of the tandem devices in solution process. The use of robust inorganic RL containing an ultrathin Au interlayer results in more efficient device performance and remarkably improved device lifetime. The optimal PbS CQDs tandem cells based on inorganic RL demonstrate a high power conversion efficiency approaching 9%. This efficiency is more than two times higher than the previous record of 4.2%, which has been kept for more than five years. The remarkable stability, high performance, and low‐temperature processing of these tandem devices may provide insight into the commercialization of flexible and large‐area CQDs tandem solar cells in the near future.     

Metal‐Nanowire‐Electrode‐Based Perovskite Solar Cells: Challenging Issues and New Opportunities

Recently, organometal halide perovskite (OMHP)‐based solar cells have been regarded as one of the most promising technologies in the research field of renewable energy applications. Along with successful demonstrations of high power conversion efficiencies (PCEs), various characteristic strategies for fabricating functional OMHP‐based solar cells have been exploited to facilitate both their practical applicability and industrial suitability. As a part of such efforts, unconventional transparent conductive electrodes have been suggested based on the implementation of metal nanowires (MeNWs), which possess both high transparency and low sheet resistance, in order to replace traditional counterparts such as costly, limitedly‐flexible vacuum‐deposited conductive metal oxides. This allows for the facile fabrication of solution‐processable, low‐cost, highly flexible, high‐performance solar cell devices. In this review, the recent progress on OMHP solar cells integrated with MeNW‐network electrodes is investigated and the challenges associated with the integration of MeNW‐network electrodes are comprehensively addressed with the suggestion of possible solutions for resolving the critical issues.     

Polyglutamylation: a fine‐regulator of protein function?

Polyglutamylation is a post-translational modification in which glutamate side chains of variable lengths are formed on the modified protein. It is evolutionarily conserved from protists to mammals and its most prominent substrate is tubulin, the microtubule (MT) building block. Various polyglutamylation states of MTs can be distinguished within a single cell and they are also characteristic of specific cell types or organelles. Polyglutamylation has been proposed to be involved in the functional adaptation of MTs, as it occurs within the carboxy-terminal tubulin tails that participate directly in the binding of many structural and motor MT-associated proteins. The discovery of a new family of enzymes that catalyse this modification has brought new insight into the mechanism of polyglutamylation and now allows for direct functional studies of the role of tubulin polyglutamylation. Moreover, the recent identification of new substrates of polyglutamylation indicates that this post-translational modification could be a potential regulator of diverse cellular processes.     

Rational Design of Metal Oxide–Based Cathodes for Efficient Dye‐Sensitized Solar Cells

Recently, there is an urgent need for alternative energy resources due to the nonrenewable nature of fossil fuels and increasing CO₂ greenhouse gas emissions. The photovoltaic technologies which directly utilize the abundant and sustainable solar energy are critical. Among various photovoltaic devices (solar cells), dye‐sensitized solar cells (DSSCs) have gained increasing attention due to their high efficiency and easy fabrication process in the past decade. The cathode is a critical part in DSSCs while the benchmark Pt cathode suffers from high cost and scarcity. Thus, the development of alternative Pt‐free cathodes has attracted significant attention with the aim to heighten the cost competitiveness of DSSCs. Among various cathodes, metal oxides are of growing interest due to their superior activity, robust stability, and low cost. Simple oxides such as WO₃ and SnO₂ are used as cathodes for DSSCs. Considering the fixed atomic environment in simple oxides, complex oxides are more attractive as cathodes because of their more flexible physical and chemical properties. This review attempts to present the rational design of simple/complex metal oxide–based cathodes in DSSCs and then to provide useful guidance for the future design of Pt‐free cathodes. The demonstrated design strategies can be extended to other electrocatalysis‐based applications.     

Adhesive Interactions and the Patterning of Nerve Connections: An Experimental and Theoretical Approach

Adhesive interactions have long been proposed to play a centralrole in the patterning of neural structures and their interconnections.Many of these ideas are based upon experiments on the projectionfrom the eye to the optic tectum (the retinotectal projection)in lowervertebrates. In order to test the feasibility of suchproposals, a detailed model, based largely on adhesive interactionsbetween cells, has been developed. Computer simulations of themodelshow that simple adhesive interactions are sufficient toexplain much of the literature on the patterning of the amphibianretinotectal projection. Aspects of the model have been experimetallytested through the use of antibodies to known adhesive molecules.The results of these experiments appear consistent with therole of adhesion in the patterning of the connections and withthe predictions of the model. Although such experiments demonstratethe power of adhesive cell interactions in the patterning ofnerve connections, additional experiments and simulations demonstratethat some other non-adhesive processes may play a role. In particular,the addition of a process that is dependent on the activityof the neurons allows the model to better fit the literature.An activity-dependent competition between neurons for adhesivesites on the target cells appears to be sufficient to play thisrole.