Inhibition of subtilisin BPN' by reaction site P1 mutants of Streptomyces subtilisin inhibitor

It has been shown that the P1 site (the center of the reactive site) of protease inhibitors corresponds to the specificity of the cognate protease, and consequently specificity of Streptomyces subtilisin inhibitor (SSI) can be altered by substitution of a single amino acid at the P1 site. In this paper, to investigate whether similar correlation between inhibitory activity of mutated SSI and substrate preference of protease is observed for subtilisin BPN', which has broad substrate specificity, a complete set of mutants of SSI at the reaction site P1 (position 73) was constructed by cassette and site-directed mutagenesis and their inhibitory activities toward subtilisin BPN' were measured. Mutated SSIs which have a polar (Ser, Thr, Gln, Asn), basic (Lys, Arg), or aromatic amino acid (Tyr, Phe, Trp, His), or Ala or Leu, at the P1 site showed almost the same strong inhibitory activity toward subtilisin as the wild type (Met) SSI. However, the inhibitory activity of SSI variants with an acidic (Glu, Asp), or a beta-branched aliphatic amino acid (Val, Ile), or Gly or Pro, at P1 was decreased. The values of the inhibitor constant (Ki) of mutated SSIs toward subtilisin BPN' were consistent with the substrate preference of subtilisin BPN'. A linear correlation was observed between log(1/Ki) of mutated SSIs and log(1/Km) of synthetic substrates. These results demonstrate that the inhibitory activities of P1 site mutants of SSI are linearly related to the substrate preference of subtilisin BPN', and indicate that the binding mode of the inhibitors with the protease may be similar to that of substrates, as in the case of trypsin and chymotrypsin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Altered Substrate Specificity of Drug-Resistant Human Immunodeficiency Virus Type 1 Protease

Resistance to human immunodeficiency virus type 1 protease (HIV PR) inhibitors results primarily from the selection of multiple mutations in the protease region. Because many of these mutations are selected for the ability to decrease inhibitor binding in the active site, they also affect substrate binding and potentially substrate specificity. This work investigates the substrate specificity of a panel of clinically derived protease inhibitor-resistant HIV PR variants. To compare protease specificity, we have used positional-scanning, synthetic combinatorial peptide libraries as well as a select number of individual substrates. The subsite preferences of wild-type HIV PR determined by using the substrate libraries are consistent with prior reports, validating the use of these libraries to compare specificity among a panel of HIV PR variants. Five out of seven protease variants demonstrated subtle differences in specificity that may have significant impacts on their abilities to function in viral maturation. Of these, four variants demonstrated up to fourfold changes in the preference for valine relative to alanine at position P2 when tested on individual peptide substrates. This change correlated with a common mutation in the viral NC/p1 cleavage site. These mutations may represent a mechanism by which severely compromised, drug-resistant viral strains can increase fitness levels. Understanding the altered substrate specificity of drug-resistant HIV PR should be valuable in the design of future generations of protease inhibitors as well as in elucidating the molecular basis of regulation of proteolysis in HIV.     

Definition of the extended substrate specificity determinants for beta-tryptases I and II.

Tryptases betaI and betaII were heterologously expressed and purified in yeast to functionally characterize the substrate specificity of each enzyme. Three positional scanning combinatorial tetrapeptide substrate libraries were used to determine the primary and extended substrate specificity of the proteases. Both enzymes have a strict primary preference for cleavage after the basic amino acids, lysine and arginine, with only a slight preference for lysine over arginine. betaI and betaII tryptase share similar extended substrate specificity, with preference for proline at P4, preference for arginine or lysine at P3, and P2 showing a slight preference for asparagine. Measurement of kinetic constants with multiple substrates designed for beta-tryptases reveal that selectivity is highly dependent on ground state substrate binding. Coupled with the functional determinants, structural determinants of tryptase substrate specificity were identified. Molecular docking of the preferred substrate sequence to the three-dimensional tetrameric tryptase structure reveals a novel extended substrate binding mode that involves interactions from two adjacent protomers, including P4 Thr-96', P3 Asp-60B' and Glu-217, and P1 Asp-189. Based on the determined substrate information, a mechanism-based tetrapeptide-chloromethylketone inhibitor was designed and shown to be a potent tryptase inhibitor. Finally, the cleavage sites of several physiologically relevant substrates of beta-tryptases show consistency with the specificity data presented here.     

Insights to substrate binding and processing by West Nile Virus NS3 protease through combined modeling, protease mutagenesis, and kinetic studies

West Nile Virus is becoming a widespread pathogen, infecting people on at least four continents with no effective treatment for these infections or many of their associated pathologies. A key enzyme that is essential for viral replication is the viral protease NS2B-NS3, which is highly conserved among all flaviviruses. Using a combination of molecular fitting of substrates to the active site of the crystal structure of NS3, site-directed enzyme and cofactor mutagenesis, and kinetic studies on proteolytic processing of panels of short peptide substrates, we have identified important enzyme-substrate interactions that define substrate specificity for NS3 protease. In addition to better understanding the involvement of S2, S3, and S4 enzyme residues in substrate binding, a residue within cofactor NS2B has been found to strongly influence the preference of flavivirus proteases for lysine or arginine at P2 in substrates. Optimization of tetrapeptide substrates for enhanced protease affinity and processing efficiency has also provided important clues for developing inhibitors of West Nile Virus infection.     

Ligand-bound structures of the dengue virus protease reveal the active conformation

Dengue is a mosquito-borne viral hemorrhagic disease that is a major threat to human health in tropical and subtropical regions. Here we report crystal structures of a peptide covalently bound to dengue virus serotype 3 (DENV-3) protease as well as the serine-protease inhibitor aprotinin bound to the same enzyme. These structures reveal, for the first time, a catalytically active, closed conformation of the DENV protease. In the presence of the peptide, the DENV-3 protease forms the closed conformation in which the hydrophilic β-hairpin region of NS2B wraps around the NS3 protease core, in a manner analogous to the structure of West Nile virus (WNV) protease. Our results confirm that flavivirus proteases form the closed conformation during proteolysis, as previously proposed for WNV. The current DENV-3 protease structures reveal the detailed interactions at the P4' to P3 sites of the substrate. The new structural information explains the sequence preference, particularly for long basic residues in the nonprime side, as well as the difference in substrate specificity between the WNV and DENV proteases at the prime side. Structural analysis of the DENV-3 protease-peptide complex revealed a pocket that is formed by residues from NS2B and NS3; this pocket also exists in the WNV NS2B/NS3 protease structure and could be targeted for potential antivirus development. The structural information presented in the current study is invaluable for the design of specific inhibitors of DENV protease.     

The three-dimensional structure of caspase-8: an initiator enzyme in apoptosis.

BACKGROUND: In the initial stages of Fas-mediated apoptosis the cysteine protease caspase-8 is recruited to the cell receptor as a zymogen (procaspase-8) and is incorporated into the death-signalling complex. Procaspase-8 is subsequently activated leading to a cascade of proteolytic events, one of them being the activation of caspase-3, and ultimately resulting in cell destruction. Variations in the substrate specificity of different caspases have been reported. RESULTS: We report here the crystal structure of a complex of the activated human caspase-8 (proteolytic domain) with the irreversible peptidic inhibitor Z-Glu-Val-Asp-dichloromethylketone at 2.8 A resolution. This is the first structure of a representative of the long prodomain initiator caspases and of the group III substrate specificity class. The overall protein architecture resembles the caspase-1 and caspase-3 folds, but shows distinct structural differences in regions forming the active site. In particular, differences observed in subsites S(3), S(4) and the loops involved in inhibitor interactions explain the preference of caspase-8 for substrates with the sequence (Leu/Val)-Glu-X-Asp. CONCLUSIONS: The structural differences could be correlated with the observed substrate specificities of caspase-1, caspase-3 and caspase-8, as determined from kinetic experiments. This information will help us to understand the role of the various caspases in the propagation of the apoptotic signal. The information gained from this investigation should be useful for the design of specific inhibitors.     

Substrate inhibition kinetic model for West Nile virus NS2B-NS3 protease

West Nile virus (WNV) has recently emerged in North America as a significant disease threat to humans and animals. Unfortunately, no approved antiviral drugs exist to combat WNV or other members of the genus Flavivirus in humans. The WNV NS2B-NS3 protease has been one of the primary targets for anti-WNV drug discovery and design since it is required for virus replication. As part of our efforts to develop effective WNV inhibitors, we reexamined the reaction kinetics of the NS2B-NS3 protease and the inhibition mechanisms of newly discovered inhibitors. The WNV protease showed substrate inhibition in assays utilizing fluorophore-linked peptide substrates GRR, GKR, and DFASGKR. Moreover, a substrate inhibition reaction step was required to accurately model kinetic data generated from protease assays with a peptide inhibitor. The substrate inhibition model suggested that peptide substrates could bind to two binding sites on the protease. Reaction product analogues also showed inhibition of the protease, demonstrating product inhibition in addition to and distinct from substrate inhibition. We propose that small peptide substrates and inhibitors may interact with protease residues that form either the P3-P1 binding surface (i.e., the S3-S1 sites) or the P1'-P3' interaction surface (i.e., the S1'-S3' sites). Optimization of substrate analogue inhibitors that target these two independent sites may lead to novel anti-WNV drugs.     

Characterization of SARS main protease and inhibitor assay using a fluorogenic substrate

SARS main protease is essential for life cycle of SARS coronavirus and may be a key target for developing anti-SARS drugs. Recently, the enzyme expressed in Escherichia coli was characterized using a HPLC assay to monitor the formation of products from 11 peptide substrates covering the cleavage sites found in the SARS viral genome. This protease easily dissociated into inactive monomer and the deduced Kd of the dimer was 100 microM. In order to detect enzyme activity, the assay needed to be performed at micromolar enzyme concentration. This makes finding the tight inhibitor (nanomolar range IC50) impossible. In this study, we prepared a peptide with fluorescence quenching pair (Dabcyl and Edans) at both ends of a peptide substrate and used this fluorogenic peptide substrate to characterize SARS main protease and screen inhibitors. The fluorogenic peptide gave extremely sensitive signal upon cleavage catalyzed by the protease. Using this substrate, the protease exhibits a significantly higher activity (kcat = 1.9 s(-1) and Km = 17 microM) compared to the previously reported parameters. Under our assay condition, the enzyme stays as an active dimer without dissociating into monomer and reveals a small Kd value (15 nM). This enzyme in conjunction with fluorogenic peptide substrate provides us a suitable tool for identifying potent inhibitors of SARS protease.     

Granzyme M is a regulatory protease that inactivates proteinase inhibitor 9, an endogenous inhibitor of granzyme B

Granzyme M is a trypsin-fold serine protease that is specifically found in the granules of natural killer cells. This enzyme has been implicated recently in the induction of target cell death by cytotoxic lymphocytes, but unlike granzymes A and B, the molecular mechanism of action of granzyme M is unknown. We have characterized the extended substrate specificity of human granzyme M by using purified recombinant enzyme, several positional scanning libraries of coumarin substrates, and a panel of individual p-nitroanilide and coumarin substrates. In contrast to previous studies conducted using thiobenzyl ester substrates (Smyth, M. J., O'Connor, M. D., Trapani, J. A., Kershaw, M. H., and Brinkworth, R. I. (1996) J. Immunol. 156, 4174-4181), a strong preference for leucine at P1 over methionine was demonstrated. The extended substrate specificity was determined to be lysine = norleucine at P4, broad at P3, proline > alanine at P2, and leucine > norleucine > methionine at P1. The enzyme activity was found to be highly dependent on the length and sequence of substrates, indicative of a regulatory function for human granzyme M. Finally, the interaction between granzyme M and the serpins alpha(1)-antichymotrypsin, alpha(1)-proteinase inhibitor, and proteinase inhibitor 9 was characterized by using a candidate-based approach to identify potential endogenous inhibitors. Proteinase inhibitor 9 was effectively hydrolyzed and inactivated by human granzyme M, raising the possibility that this orphan granzyme bypasses proteinase inhibitor 9 inhibition of granzyme B.     

Biochemical characterization of prostasin, a channel activating protease

Human prostasin was recently identified as a potential regulator of epithelial sodium channel (ENaC) function. Through the use of positional scanning combinatorial substrate libraries, prostasin was shown to have a preference for poly-basic substrates: in position P4 preference was for arginine or lysine; in P3 preference was for histidine, lysine or arginine; in P2 preference was for basic or large hydrophobic amino acids; and in P1 preference was for arginine and lysine. P1', P2', and P3' displayed broad selectivity with the exception of a lack of activity for isoleucine, and P4' had a preference for small, unbranched, amino acids such as alanine and serine. A prostasin-preferred poly-basic cleavage site was found in the extracellular domains of the ENaC alpha- and beta-subunits, and may present a mechanism for prostasin activation. The absence of activity seen with substrates containing isoleucine in position P1' explains the inability of prostasin to autoactivate and suggests that prostasin proteolytic activity is regulated by an upstream protease. Prostasin activity was highly influenced by mono- and divalent metal ions which were potent inhibitors and substrate specific modulators of enzymatic activity. In the presence of sub-inhibitory concentrations of zinc, the activity of prostasin increased several-fold and its substrate specificity was significantly altered in favor of a strong preference for histidine in positions P3 or P4 of the substrate.     

Structure of an Fab-protease complex reveals a highly specific non-canonical mechanism of inhibition

The vast majority of protein protease inhibitors bind their targets in a substrate-like manner. This is a robust and efficient mechanism of inhibition but, due to the highly conserved architecture of protease active sites, these inhibitors often exhibit promiscuity. Inhibitors that show strict specificity for one protease usually achieve this selectivity by combining substrate-like binding in the active site with exosite binding on the protease surface. The development of new, specific inhibitors can be aided greatly by binding to non-conserved regions of proteases if potency can be maintained. Due to their ability to bind specifically to nearly any antigen, antibodies provide an excellent scaffold for creating inhibitors targeted to a single member of a family of highly homologous enzymes. The 2.2 Å resolution crystal structure of an Fab antibody inhibitor in complex with the serine protease membrane-type serine protease 1 (MT-SP1/matriptase) reveals the molecular basis of its picomolar potency and specificity. The inhibitor has a distinct mechanism of inhibition; it gains potency and specificity through interactions with the protease surface loops, and inhibits by binding in the active site in a catalytically non-competent manner. In contrast to most naturally occurring protease inhibitors, which have diverse structures but converge to a similar inhibitory archetype, antibody inhibitors provide an opportunity to develop divergent mechanisms of inhibition from a single scaffold.     

Crystal structure of foot-and-mouth disease virus 3C protease. New insights into catalytic mechanism and cleavage specificity

Foot-and-mouth disease virus (FMDV) causes a widespread and economically devastating disease of domestic livestock. Although FMDV vaccines are available, political and technical problems associated with their use are driving a renewed search for alternative methods of disease control. The viral RNA genome is translated as a single polypeptide precursor that must be cleaved into functional proteins by virally encoded proteases. 10 of the 13 cleavages are performed by the highly conserved 3C protease (3C(pro)), making the enzyme an attractive target for antiviral drugs. We have developed a soluble, recombinant form of FMDV 3C(pro), determined the crystal structure to 1.9-angstroms resolution, and analyzed the cleavage specificity of the enzyme. The structure indicates that FMDV 3C(pro) adopts a chymotrypsin-like fold and possesses a Cys-His-Asp catalytic triad in a similar conformation to the Ser-His-Asp triad conserved in almost all serine proteases. This observation suggests that the dyad-based mechanisms proposed for this class of cysteine proteases need to be reassessed. Peptide cleavage assays revealed that the recognition sequence spans at least four residues either side of the scissile bond (P4-P4') and that FMDV 3C(pro) discriminates only weakly in favor of P1-Gln over P1-Glu, in contrast to other 3C(pro) enzymes that strongly favor P1-Gln. The relaxed specificity may be due to the unexpected absence in FMDV 3C(pro) of an extended beta-ribbon that folds over the substrate binding cleft in other picornavirus 3C(pro) structures. Collectively, these results establish a valuable framework for the development of FMDV 3C(pro) inhibitors.     

Biosynthesis, purification, and substrate specificity of severe acute respiratory syndrome coronavirus 3C-like proteinase

The 3C-like proteinase of severe acute respiratory syndrome (SARS) coronavirus has been proposed to be a key target for structural-based drug design against SARS. In order to understand the active form and the substrate specificity of the enzyme, we have cloned, expressed, and purified SARS 3C-like proteinase. Analytic gel filtration shows a mixture of monomer and dimer at a protein concentration of 4 mg/ml and mostly monomer at 0.2 mg/ml, which correspond to the concentration used in the enzyme assays. The linear decrease of the enzymatic-specific activity with the decrease of enzyme concentration revealed that only the dimeric form is active and the dimeric interface could be targeted for structural-based drug design against SARS 3C-like proteinase. By using a high pressure liquid chromatography assay, SARS 3C-like proteinase was shown to cut the 11 peptides covering all of the 11 cleavage sites on the viral polyprotein with different efficiency. The two peptides corresponding to the two self-cleavage sites are the two with highest cleavage efficiency, whereas peptides with non-canonical residues at P2 or P1' positions react slower. The P2 position of the substrates seems to favor large hydrophobic residues. Secondary structure studies for the peptide substrates revealed that substrates with more beta-sheetlike structure tend to react fast. This study provides a basic understanding of the enzyme catalysis and a full substrate specificity spectrum for SARS 3C-like proteinase, which are helpful for structural-based inhibitor design against SARS and other coronavirus.     

Activity of recombinant dengue 2 virus NS3 protease in the presence of a truncated NS2B co-factor, small peptide substrates, and inhibitors

Recombinant forms of the dengue 2 virus NS3 protease linked to a 40-residue co-factor, corresponding to part of NS2B, have been expressed in Escherichia coli and shown to be active against para-nitroanilide substrates comprising the P6-P1 residues of four substrate cleavage sequences. The enzyme is inactive alone or after the addition of a putative 13-residue co-factor peptide but is active when fused to the 40-residue co-factor, by either a cleavable or a noncleavable glycine linker. The NS4B/NS5 cleavage site was processed most readily, with optimal processing conditions being pH 9, I = 10 mm, 1 mm CHAPS, 20% glycerol. A longer 10-residue peptide corresponding to the NS2B/NS3 cleavage site (P6-P4') was a poorer substrate than the hexapeptide (P6-P1) para-nitroanilide substrate under these conditions, suggesting that the prime side substrate residues did not contribute significantly to protease binding. We also report the first inhibitors of a co-factor-complexed, catalytically active flavivirus NS3 protease. Aprotinin was the only standard serine protease inhibitor to be active, whereas a number of peptide substrate analogues were found to be competitive inhibitors at micromolar concentrations.     

Evaluation of an octahydroisochromene scaffold used as a novel SARS 3CL protease inhibitor

An octahydroisochromene scaffold has been introduced into a known SARS 3CL protease inhibitor as a novel hydrophobic core to interact with the S2 pocket of the protease. An alkyl or aryl substituent was also introduced at the 1-position of the octahydroisochromene scaffold and expected to introduce additional interactions with the protease. Sharpless–Katsuki asymmetric epoxidation and Sharpless asymmetric dihydroxylation were employed to construct the octahydroisochromene scaffold. The introductions of the P1 site His-al and the substituent at 1-position was achieved using successive reductive amination reactions. Our initial evaluations of the diastereo-isomeric mixtures (16a–d) revealed that the octahydroisochromene moiety functions as a core hydrophobic scaffold for the S2 pocket of the protease and the substituent at the 1-position may form additional interactions with the protease. The inhibitory activities of the diastereoisomerically-pure inhibitors (3a–d) strongly suggest that a specific stereo-isomer of the octahydroisochromene scaffold, (1S, 3S) 3b, directs the P1 site imidazole, the warhead aldehyde, and substituent at the 1-position of the fused ring to their appropriate pockets in the protease.     

Verteporfin is a substrate-selective γ-secretase inhibitor that binds the amyloid precursor protein transmembrane domain

This work reports substrate-selective inhibition of a protease with broad substrate specificity based on direct binding of a small-molecule inhibitor to the substrate. The target for these studies was γ-secretase protease, which cleaves dozens of different single-span membrane protein substrates, including both the C99 domain of the human amyloid precursor protein and the Notch receptor. Substrate-specific inhibition of C99 cleavage is desirable to reduce production of the amyloid-β polypeptide without inhibiting Notch cleavage, a major source of toxicity associated with broad specificity γ-secretase inhibitors. In order to identify a C99-selective inhibitors of the human γ-secretase, we conducted an NMR-based screen of FDA-approved drugs against C99 in model membranes. From this screen, we identified the small-molecule verteporfin with these properties. We observed that verteporfin formed a direct 1:1 complex with C99, with a K_D of 15–47 μM (depending on the membrane mimetic used), and that it did not bind the transmembrane domain of the Notch-1 receptor. Biochemical assays showed that direct binding of verteporfin to C99 inhibits γ-secretase cleavage of C99 with IC₅₀ values in the range of 15–164 μM, while Notch-1 cleavage was inhibited only at higher concentrations, and likely via a mechanism that does not involve binding to Notch-1. This work documents a robust NMR-based approach to discovery of small-molecule binders to single-span membrane proteins and confirmed that it is possible to inhibit γ-secretase in a substrate-specific manner.     

Structural insights into the substrate specificity of human granzyme H: the functional roles of a novel RKR motif

Human granzyme H (GzmH) is constitutively expressed in human NK cells that have important roles in innate immune responses against tumors and viruses. GzmH is a chymotrypsin-like serine protease. Its substrate preference and its mechanism of substrate recognition are poorly understood. To provide structural insights into the substrate recognition mechanisms for GzmH, we solved the crystal structures of a D102N-GzmH mutant alone and in complex with a decapeptide substrate and an inhibitor to 2.2 ?, 2.4 ?, and 2.7 ?, respectively. The Thr(189), Gly(216), and Gly(226) specificity triad in the S1 pocket of GzmH defines its preference for bulky, aromatic residues (Tyr and Phe) at the P1 position. Notably, we discovered that an unusual RKR motif (Arg(39)-Lys(40)-Arg(41)), conserved only in GzmH, helps define the S3' and S4' binding regions, indicating the preference for acidic residues at the P3' and P4' sites. Disruption of the RKR motif or the acidic P3' and P4' residues in the substrate abolished the proteolytic activity of GzmH. We designed a tetrapeptide chloromethylketone inhibitor, Ac-PTSY-chloromethylketone, which can selectively and efficiently block the enzymatic and cytotoxic activity of GzmH, providing a useful tool for further studies on the function of GzmH.     

Inhibition of serine proteases by functionalized sulfonamides coupled to the 1,2,5-thiadiazolidin-3-one 1,1 dioxide scaffold.

A challenge associated with drug design is the development of selective inhibitors of proteases (serine or cysteine) that exhibit the same primary substrate specificity, that is, show a preference for the same P(1) residue. While these proteases have similar active sites, nevertheless there are subtle differences in their S and S' subsites which can be exploited. We describe herein for the first time the use of functionalized sulfonamides as a design and diversity element which, when coupled to the 1,2,5-thiadiazolidin-3-one 1,1 dioxide scaffold yields potent, time-dependent inhibitors of the serine proteases human leukocyte elastase (HLE), proteinase 3 (PR 3) and cathepsin G(Cat G). Our preliminary findings suggest that (a) appending to the 1,2,5-thiadiazolidin-3-one 1,1 dioxide scaffold recognition and diversity elements that interact with both the S and S' subsites of a target protease may result in optimal enzyme selectivity and potency and, (b) functionalized sulfonamides constitute a powerful design and diversity element with low intrinsic chemical reactivity and potentially wide applicability.     

Potent inhibitors of the HIV-1 protease incorporating cyclic urea P1-P2 scaffold

We have developed synthetic approaches to novel analogues of 2-imidazolidinone scaffold 2, which was found to be an effective P1-P2 mimetic in HIV-1 protease inhibitor 4. This enabled a rapid synthesis of analogues of 4 and subsequently allowed us to evaluate and rationalize the SAR. Accordingly, trans relationship of P1 and P2 substituents in the P1-P2 mimetic, as found in a related 2-pyrrolidone-based scaffold 1, was found necessary for high potency against HIV-1 protease. Results of this study provided further rationale towards subsequent optimization of 2-pyrrolidone-based lead 3, which led us to potent and drug-like HIV-1 protease inhibitors described in a follow-on report (Bioorg. Med. Chem. Lett. 2004, 14, in press. ).     

A cleavage enzyme-cytometric bead array provides biochemical profiling of resistance mutations in HIV-1 Gag and protease

Most protease-substrate assays rely on short, synthetic peptide substrates consisting of native or modified cleavage sequences. These assays are inadequate for interrogating the contribution of native substrate structure distal to a cleavage site that influences enzymatic cleavage or for inhibitor screening of native substrates. Recent evidence from HIV-1 isolates obtained from individuals resistant to protease inhibitors has demonstrated that mutations distal to or surrounding the protease cleavage sites in the Gag substrate contribute to inhibitor resistance. We have developed a protease-substrate cleavage assay, termed the cleavage enzyme- cytometric bead array (CE-CBA), which relies on native domains of the Gag substrate containing embedded cleavage sites. The Gag substrate is expressed as a fluorescent reporter fusion protein, and substrate cleavage can be followed through the loss of fluorescence utilizing flow cytometry. The CE-CBA allows precise determination of alterations in protease catalytic efficiency (k(cat)/K(M)) imparted by protease inhibitor resistance mutations in protease and/or gag in cleavage or noncleavage site locations in the Gag substrate. We show that the CE-CBA platform can identify HIV-1 protease present in cellular extractions and facilitates the identification of small molecule inhibitors of protease or its substrate Gag. Moreover, the CE-CBA can be readily adapted to any enzyme-substrate pair and can be utilized to rapidly provide assessment of catalytic efficiency as well as systematically screen for inhibitors of enzymatic processing of substrate.