Component interactions and implications for complex formation in the multicomponent toluene 4-monooxygenase

A fluorophore-labeled form of the T4moD, the catalytic effector protein of the toluene 4-monooxygenase complex, was prepared by engineering the N-terminal region to contain a tetraCys motif and treatment with biarsenical fluorescein. Fluorescence anisotropy was used to study the protein-protein interactions among various combinations of the four components of the complex. Binding interactions were detected between T4moD and the hydroxylase component T4moH [K(D) value of 83 nM for interaction with the alphabetagamma protomer] and between T4moD and the Rieske [2Fe-2S] ferredoxin component T4moC (K(D) value of 78 nM). No binding interactions were detected between T4moD and the NADH oxidoreductase component T4moF, but T4moF was able to disrupt binding between T4moC and T4moD. The detected binding interactions suggest an intermediary electron transfer complex between T4moC and T4moD that excludes T4moF. The results indicate that specialization of effector protein function may include specific protein-protein interactions with [2Fe-2S] domains as well as the hydroxylase component.     

Crystal structures and functional studies of T4moD, the toluene 4-monooxygenase catalytic effector protein

Toluene 4-monooxygenase (T4MO) is a four-component complex that catalyzes the regiospecific, NADH-dependent hydroxylation of toluene to yield p-cresol. The catalytic effector (T4moD) of this complex is a 102-residue protein devoid of metals or organic cofactors. It forms a complex with the diiron hydroxylase component (T4moH) that influences both the kinetics and regiospecificity of catalysis. Here, we report crystal structures for native T4moD and two engineered variants with either four (DeltaN4-) or 10 (DeltaN10-) residues removed from the N-terminal at 2.1-, 1.7-, and 1.9-A resolution, respectively. The crystal structures have C-alpha root-mean-squared differences of less than 0.8 A for the central core consisting of residues 11-98, showing that alterations of the N-terminal have little influence on the folded core of the protein. The central core has the same fold topology as observed in the NMR structures of T4moD, the methane monooxygenase effector protein (MmoB) from two methanotrophs, and the phenol hydroxylase effector protein (DmpM). However, the root-mean-squared differences between comparable C-alpha positions in the X-ray structures and the NMR structures vary from approximately 1.8 A to greater than 6 A. The X-ray structures exhibit an estimated overall coordinate error from 0.095 (0.094) A based on the R-value (R free) for the highest resolution DeltaN4-T4moD structure to 0.211 (0.196) A for the native T4moD structure. Catalytic studies of the DeltaN4-, DeltaN7-, and DeltaN10- variants of T4moD show statistically insignificant changes in k(cat), K(M), k(cat)/K(M), and K(I) relative to the native protein. Moreover, there was no significant change in the regiospecificity of toluene oxidation with any of the T4moD variants. The relative insensitivity to changes in the N-terminal region distinguishes T4moD from the MmoB homologues, which each require the approximately 33 residue N-terminal region for catalytic activity.     

Solution structure of the toluene 4-monooxygenase effector protein (T4moD)

Toluene 4-monooxygenase (T4MO) from Pseudomonas mendocina catalyzes the NADH- and O(2)-dependent hydroxylation of toluene to form p-cresol. The complex consists of an NADH oxidoreductase (T4moF), a Rieske ferredoxin (T4moC), a diiron hydroxylase [T4moH, with (alphabetagamma)(2) quaternary structure], and a catalytic effector protein (T4moD). The solution structure of the 102-amino acid T4moD effector protein has been determined from 2D and 3D (1)H, (13)C, and (15)N NMR spectroscopic data. The structural model was refined through simulated annealing by molecular dynamics in torsion angle space (DYANA software) with input from 1467 experimental constraints, comprising 1259 distance constraints obtained from NOEs, 128 dihedral angle constraints from J-couplings, and 80 hydrogen bond constraints. Of 60 conformers that met the acceptance criteria, the 20 that best satisfied the input constraints were selected to represent the solution structure. With exclusion of the ill-defined N- and C-terminal segments (Ser1-Asn11 and Asp99-Met102), the atomic root-mean-square deviation for the 20 conformers with respect to the mean coordinates was 0.71 A for the backbone and 1.24 A for all non-hydrogen atoms. The secondary structure of T4moD consists of three alpha-helices and seven beta-strands arranged in an N-terminal betaalphabetabeta and a C-terminal betaalphaalphabetabetabeta domain topology. Although the published NMR structures of the methane monooxygenase effector proteins from Methylosinus trichosporium OB3b and Methylococcus capsulatus (Bath) have a similar secondary structure topology, their three-dimensional structures differ from that of T4moD. The major differences in the structures of the three effector proteins are in the relative orientations of the two beta-sheets and the interactions between the alpha-helices in the two domains. The structure of T4moD is closer to that of the methane monooxygenase effector protein from M. capsulatus (Bath) than that from M. trichosporium OB3b. The specificity of T4moD as an effector protein was investigated by replacing it in reconstituted T4MO complexes with effector proteins from monooxygenases from other bacterial species: Pseudomonas pickettii PKO1 (TbuV, toluene 3-monooxygenase); Pseudomonas species JS150 (TbmC, toluene 2-monooxygenase); and Burkeholderia cepacia G4 (S1, toluene 2-monooxygenase). The results showed that the closely related TbuV effector protein (55% sequence identity) provided partial activation of the complex, whereas the more distantly related TbmC (34% sequence identity) and S1 (29% sequence identity) did not. The (1)H NMR chemical shifts of the side-chain amide protons of Asn34, a conserved, structurally relevant amino acid, were found to be similar in spectra of effector proteins T4moD and TbuV but not in the spectrum of TbmC. This suggests that the region around Asn34 may be involved in structural aspects contributing to functional specificity.     

Remarkable aliphatic hydroxylation by the diiron enzyme toluene 4-monooxygenase in reactions with radical or cation diagnostic probes norcarane, 1,1-dimethylcyclopropane, and 1,1-diethylcyclopropane

Toluene 4-monooxygenase (T4MO) catalyzes the hydroxylation of toluene to yield 96% p-cresol. This diiron enzyme complex was used to oxidize norcarane (bicyclo[4.1.0]heptane), 1,1-dimethylcyclopropane, and 1,1-diethylcyclopropane, substrate analogues that can undergo diagnostic reactions upon the production of transient radical or cationic intermediates. Norcarane closely matches the shape and volume of the natural substrate toluene. Reaction of isoforms of the hydroxylase component of T4MO (T4moH) with different regiospecificities for toluene hydroxylation (k(cat) approximately 1.9-2.3 s(-)(1) and coupling efficiency approximately 81-96%) revealed similar catalytic parameters for norcarane oxidation (k(cat) approximately 0.3-0.5 s(-)(1) and coupling efficiency approximately 72%). The products included variable amounts of the un-rearranged isomeric norcaranols and cyclohex-2-enyl methanol, a product attributed to rearrangement of a radical oxidation intermediate. A ring-expansion product derived from the norcaranyl C-2 cation, cyclohept-3-enol, was not produced by either the natural enzyme or any of the T4moH isoforms tested. Comparative studies of 1,1-dimethylcyclopropane and 1,1-diethylcyclopropane, diagnostic substrates with differences in size and with approximately 50-fold slower k(cat) values, gave products consistent with both radical rearrangement and cation ring expansion. Examination of the isotopic enrichment of the incorporated O-atoms for all products revealed high-fidelity incorporation of an O-atom from O(2) in the un-rearranged and radical-rearranged products, while the O-atom found in the cation ring-expansion products was predominantly obtained by reaction with H(2)O. The results show a divergence of radical and cation pathways for T4moH-mediated hydroxylation that can be dissected by diagnostic substrate probe rearrangements and by changes in the source of oxygen used for substrate oxygenation.     

Redox and functional analysis of the Rieske ferredoxin component of the toluene 4-monooxygenase

Toluene 4-monooxygenase catalyzes the NADH- and O2-dependent hydroxylation of toluene to form p-cresol. The four-protein complex consists of a diiron hydroxylase, an oxidoreductase, a catalytic effector protein, and a Rieske-type ferredoxin (T4moC). Phylogenetic analysis suggests that T4moC is part of a clade specialized for reaction with diiron hydroxylases, possibly reflected in the conservation of W69, whose indole side chain makes close contacts with a bridging sulfide. In order to further investigate the possible origins of this specialization, T4moC, mutated variants of T4moC, and three other purified ferredoxins (the Thermus Rieske protein, the Burkholderia cepacia Rieske-type biphenyl dioxygenase ferredoxin BphF, and the Ralstonia pickettii PK01 toluene monooxygenase TbuB, the Rieske-type ferredoxin from another diiron monooxygenase complex) were studied by redox potential measurements and their ability to complement the catalytic function of the reconstituted toluene 4-monooxygenase complex. A saturation mutagenesis of T4moC W69 indicates that an aromatic residue may modulate the redox potential and is also necessary for activity and/or stability. The redox potential of T4moC was determined to be -173 mV, W69F T4moC was -139 mV, and TbuB was -150 mV. For comparison, BphF had a redox potential of -157 mV [Couture et al. (2001) Biochemistry 40, 84-92]. Of these ferredoxins, all except BphF were able to provide catalytic activity. Given the range in redox potentials observed in the active ferredoxins, shape and electrostatics are strongly implicated in the catalytic specialization. Mutagenesis of other T4moC surface residues gave further insight into possible origins of catalytic specialization. Thus R65A T4moC gave an alteration in apparent KM only, while D82A/D83A T4moC gave alterations in both apparent kcat and KM. Since the different catalytic results were obtained by mutagenesis of residues lying on different sides of the protein adjacent to the [2Fe-2S] cluster, the results suggest that two different faces of T4moC may be involved in protein-protein interactions during catalysis.     

Optimized expression and purification of toluene 4-monooxygenase hydroxylase

Toluene 4-monooxygenase is a four-protein complex that catalyzes the O(2)- and NADH-dependent oxidation of toluene to p-cresol. The influence of various expression systems on the host cell growth characteristics, purified protein yields, and specific activity of the hydroxylase (T4moH) component of the complex was evaluated by considering the cell mass obtained per liter of fermentation culture medium, the purified protein obtained per gram of cell mass, and the specific activity of purified T4moH. The specific activity of purified T4moH was determined to be 1200-1250 nmol of p-cresol formed per minute per milligram of T4moH in air-saturated 50 mM phosphate buffer, pH 7.5, at 25 degrees C in the presence of optimal concentrations of the other protein components of the complex, saturating toluene (5.8 mM at 25 degrees C), and saturating NADH (1 mM). This value was obtained for T4moH purified from several different expression systems and apparently represents the maximal specific activity of the enzyme complex for toluene hydroxylation. By manipulation of vectors and gene inserts to eliminate adventitious catalytic turnover of NADH, up to 60-fold increase in the volumetric yield of T4moH activity was obtained from recombinant fermentations in Escherichia coli BL21(DE3).     

Toluene 3-monooxygenase of Ralstonia pickettii PKO1 is a para-hydroxylating enzyme

Oxygenases are promising biocatalysts for performing selective hydroxylations not accessible by chemical methods. Whereas toluene 4-monooxygenase (T4MO) of Pseudomonas mendocina KR1 hydroxylates monosubstituted benzenes at the para position and toluene ortho-monooxygenase (TOM) of Burkholderia cepacia G4 hydroxylates at the ortho position, toluene 3-monooxygenase (T3MO) of Ralstonia pickettii PKO1 was reported previously to hydroxylate toluene at the meta position, producing primarily m-cresol (R. H. Olsen, J. J. Kukor, and B. Kaphammer, J. Bacteriol. 176:3749-3756, 1994). Using gas chromatography, we have discovered that T3MO hydroxylates monosubstituted benzenes predominantly at the para position. TG1/pBS(Kan)T3MO cells expressing T3MO oxidized toluene at a maximal rate of 11.5 +/- 0.33 nmol/min/mg of protein with an apparent Km value of 250 microM and produced 90% p-cresol and 10% m-cresol. This product mixture was successively transformed to 4-methylcatechol. T4MO, in comparison, produces 97% p-cresol and 3% m-cresol. Pseudomonas aeruginosa PAO1 harboring pRO1966 (the original T3MO-bearing plasmid) also exhibited the same product distribution as that of TG1/pBS(Kan)T3MO. TG1/pBS(Kan)T3MO produced 66% p-nitrophenol and 34% m-nitrophenol from nitrobenzene and 100% p-methoxyphenol from methoxybenzene, as well as 62% 1-naphthol and 38% 2-naphthol from naphthalene; similar results were found with TG1/pBS(Kan)T4MO. Sequencing of the tbu locus from pBS(Kan)T3MO and pRO1966 revealed complete identity between the two, thus eliminating any possible cloning errors. 1H nuclear magnetic resonance analysis confirmed the structural identity of p-cresol in samples containing the product of hydroxylation of toluene by pBS(Kan)T3MO.     

Threonine 201 in the diiron enzyme toluene 4-monooxygenase is not required for catalysis

The diiron enzyme toluene 4-monooxygenase from Pseudomonas mendocina KR1 catalyzes the NADH- and O(2)-dependent hydroxylation of toluene. A combination of sequence alignments and spectroscopic studies indicate that T4MO has an active site structure closely related to the crystallographically characterized methane monooxygenase hydroxylase. In the methane monooxygenase hydroxylase, active site residue T213 has been proposed to participate in O(2) activation by analogy to certain proposals made for cytochrome P450. In this work, mutagenesis of the comparable residue in the toluene 4-monooxygenase hydroxylase, T201, has been used to investigate the role of an active site hydroxyl group in catalysis. Five isoforms (T201S, T201A, T201G, T201F, and T201K) that retain catalytic activity based on an in vivo indigo formation assay were identified, and detailed characterizations of the purified T201S, T201A, and T201G variants are reported. These isoforms have k(cat) values of 1.2, 1.0, and 0.6 s(-)(1), respectively, and k(cat)/K(M) values that vary by only approximately 4-fold relative to that of the native isoform. Moreover, these isoforms exhibit 80-90% coupling efficiency, which also compares favorably to the >94% coupling efficiency determined for the native isoform. For the T201S, T201A, and T201G isoforms, the regiospecificity of toluene hydroxylation was nearly identical to that of the natural isoform, with p-cresol representing 90-95% of the total product distribution. In contrast, the T201F isoform caused a substantial shift in the product distribution, and gave o- and p-cresol in a 1:1 ratio. In addition, the amount of benzyl alcohol was increased approximately 10-fold with the T201F isoform. For reaction with p-xylene, previous studies have shown that the native isoform reacted to give 4-methybenzyl alcohol and 2, 5-dimethylphenol in a 4:1 ratio [Pikus, J. D., Studts, J. M., McClay, K., Steffan, R. J., and Fox, B. G. (1997) Biochemistry 36, 9283-9289]. For comparison, the T201S, T201A, and T201F isoforms gave a slightly relaxed 3:1 ratio of these products, while the T201G isoform gave a dramatically relaxed 1:1 ratio. On the basis of these studies, we conclude that the hydroxyl group of T201 is not essential to maintaining the turnover rate or the coupling of the toluene 4-monooxygenase complex. However, changing the volume occupied by the side chain at the position of T201 can lead to alterations in the regiospecificity of the hydroxylation, presumably by producing different orientations for substrate binding during catalysis.     

Protein engineering of toluene 4-monooxygenase of Pseudomonas mendocina KR1 for synthesizing 4-nitrocatechol from nitrobenzene

After discovering that toluene 4-monooxygenase (T4MO) of Pseudomonas mendocina KR1 oxidizes nitrobenzene to 4-nitrocatechol, albeit at a very low rate, this reaction was improved using directed evolution and saturation mutagenesis. Screening 550 colonies from a random mutagenesis library generated by error-prone PCR of tmoAB using Escherichia coli TG1/pBS(Kan)T4MO on agar plates containing nitrobenzene led to the discovery of nitrocatechol-producing mutants. One mutant, NB1, contained six amino acid substitutions (TmoA Y22N, I84Y, S95T, I100S, S400C; TmoB D79N). It was believed that position I100 of the alpha subunit of the hydroxylase (TmoA) is the most significant for the change in substrate reactivity due to previous results in our lab with a similar enzyme, toluene ortho-monooxygenase of Burkholderia cepacia G4. Saturation mutagenesis at this position resulted in the generation of two more nitrocatechol mutants, I100A and I100S; the rate of 4-nitrocatechol formation by I100A was more than 16 times higher than that of wild-type T4MO at 200 microM nitrobenzene (0.13 +/- 0.01 vs. 0.008 +/- 0.001 nmol/min.mg protein). HPLC and mass spectrometry analysis revealed that variants NB1, I100A, and I100S produce 4-nitrocatechol via m-nitrophenol, while the wild-type produces primarily p-nitrophenol and negligible amounts of nitrocatechol. Relative to wild-type T4MO, whole cells expressing variant I100A convert nitrobenzene into m-nitrophenol with a Vmax of 0.61 +/- 0.037 vs. 0.16 +/- 0.071 nmol/min.mg protein and convert m-nitrophenol into nitrocatechol with a Vmax of 3.93 +/- 0.26 vs. 0.58 +/- 0.033 nmol/min.mg protein. Hence, the regiospecificity of nitrobenzene oxidation was changed by the random mutagenesis, and this led to a significant increase in 4-nitrocatechol production. The regiospecificity of toluene oxidation was also altered, and all of the mutants produced 20% m-cresol and 80% p-cresol, while the wild-type produces 96% p-cresol. Interestingly, the rate of toluene oxidation (the natural substrate of the enzyme) by I100A was also higher by 65% (7.2 +/- 1.2 vs. 4.4 +/- 0.3 nmol/min mg protein). Homology-based modeling of TmoA suggests reducing the size of the side chain of I100 leads to an increase in the width of the active site channel, which facilitates access of substrates and promotes more flexible orientations.     

Crystallographic analysis of active site contributions to regiospecificity in the diiron enzyme toluene 4-monooxygenase

Crystal structures of toluene 4-monooxygenase hydroxylase in complex with reaction products and effector protein reveal active site interactions leading to regiospecificity. Complexes with phenolic products yield an asymmetric μ-phenoxo-bridged diiron center and a shift of diiron ligand E231 into a hydrogen bonding position with conserved T201. In contrast, complexes with inhibitors p-NH(2)-benzoate and p-Br-benzoate showed a μ-1,1 coordination of carboxylate oxygen between the iron atoms and only a partial shift in the position of E231. Among active site residues, F176 trapped the aromatic ring of products against a surface of the active site cavity formed by G103, E104 and A107, while F196 positioned the aromatic ring against this surface via a π-stacking interaction. The proximity of G103 and F176 to the para substituent of the substrate aromatic ring and the structure of G103L T4moHD suggest how changes in regiospecificity arise from mutations at G103. Although effector protein binding produced significant shifts in the positions of residues along the outer portion of the active site (T201, N202, and Q228) and in some iron ligands (E231 and E197), surprisingly minor shifts (<1 ?) were produced in F176, F196, and other interior residues of the active site. Likewise, products bound to the diiron center in either the presence or absence of effector protein did not significantly shift the position of the interior residues, suggesting that positioning of the cognate substrates will not be strongly influenced by effector protein binding. Thus, changes in product distributions in the absence of the effector protein are proposed to arise from differences in rates of chemical steps of the reaction relative to motion of substrates within the active site channel of the uncomplexed, less efficient enzyme, while structural changes in diiron ligand geometry associated with cycling between diferrous and diferric states are discussed for their potential contribution to product release.     

Soluble expression and purification of the oxidoreductase component of toluene 4-monooxygenase

Toluene 4-monooxygenase (T4MO) is a member of the bacterial multicomponent monooxygenases, an enzyme family that utilizes a soluble diiron hydroxylase to oxidize a variety of hydrocarbons as the initial step in their metabolism. The hydroxylases obtain reducing equivalents from NAD(P)H via an electron transfer chain that is initiated by an oxidoreductase containing an N-terminal ferredoxin domain and C-terminal flavin- and NAD-binding domains. T4moF, the NADH oxidoreductase of T4MO, was expressed as a soluble protein in Escherichia coli BL21(DE3) from the pUC-derived expression vector pRS205. This vector contains a lac promoter instead of a T7 promoter. A three step purification from the soluble cell lysate yielded approximately 1 mg of T4moF per gram of wet cell paste with greater than 90% purity. The purified protein contained 1 mol of FAD and 2 mol of Fe per mol of T4moF; quantitative EPR spectroscopy showed approximately 1 mol of the S=1/2 signal from the reduced [2Fe-2S] cluster per mol of T4moF. Steady state kinetic analysis of p-cresol formation activity treating T4moF as the variable substrate while all other proteins and substrates were held constant gave apparent K(M-) and apparent k(cat)-values of 0.15 microM and 3.0 s(-1), respectively. This expression system and purification allows for the recovery of the soluble oxidoreductase in yields that facilitate further biochemical and structural characterizations.     

Protein engineering of toluene-o-xylene monooxygenase from Pseudomonas stutzeri OX1 for oxidizing nitrobenzene to 3-nitrocatechol, 4-nitrocatechol, and nitrohydroquinone

Toluene-o-xylene monooxygenase (ToMO) from Pseudomonas stutzeri OX1 was found to oxidize nitrobenzene (NB) to form m-nitrophenol (m-NP, 72%) and p-NP (28%) with an initial rate of 0.098 and 0.031 nmol/(min mg protein), respectively. It was also discovered that wild-type ToMO forms 4-nitrocatechol (4-NC) from m-NP and p-NP with an initial rate of 0.15 and 0.0082 nmol/(min mg protein), respectively, and 3-NC (12%) and nitrohydroquinone (NHQ, 88%) from o-NP with an initial rate of 0.11 and 0.8 nmol/(min mg protein), respectively. To increase the oxidation rate and alter the oxidation regiospecificity of nitro aromatics as well as to study the role of the active site residues I100, Q141, T201, and F205 of the alpha hydroxylase fragment of ToMO (TouA), DNA shuffling and saturation mutagenesis were used to generate random mutants. The mutants were initially identified by screening via a rapid agar plate assay and then were further examined by high-performance liquid chromatography (HPLC) and gas chromatography (GC). Several mutants with higher rates of activities and with different regiospecificities were identified; for example, Escherichia coli TG1 cells expressing either TouA mutant M180T/E284G or E214G/D312N/M399V produce 4-NC 4.5- and 20-fold faster than wild-type ToMO (0.037 and 0.16 nmol/min mg protein from p-NP, respectively). TouA mutant A107T/E214A had the regiospecificity of NB changed significantly from 28% to 79% p-NP. From 200 microM NB, TouA variants A101T/M114T, A110T/E392D, M180T/E284G, and E214G/D312N/M399V produce 4-NC whereas wild-type ToMO does not. From m-NP, TouA mutant I100Q produces 4-NC (37%) and NHQ (63%), whereas wild-type ToMO produces only 4-NC (100%). Variant A107T/E214A acts like a para enzyme and forms p-cresol as the major product (93%) from toluene with enhanced activity (2.3-fold), whereas wild-type ToMO forms 32%, 21%, and 47% of o-, m-, and p-cresol, respectively. Hence, the non-specific ToMO was converted into a regiospecific enzyme, which rivals toluene 4-monooxygenase of P. mendocina KR1 and toluene o-monooxygenase of Burkholderia cepacia G4 in its specificity.     

Regiospecific oxidation of naphthalene and fluorene by toluene monooxygenases and engineered toluene 4-monooxygenases of Pseudomonas mendocina KR1

The regiospecific oxidation of the polycyclic aromatic hydrocarbons naphthalene and fluorene was examined with Escherichia coli strains expressing wildtype toluene 4-monooxygenase (T4MO) from Pseudomonas mendocina KR1, toluene para-monooxygenase (TpMO) from Ralstonia pickettii PKO1, toluene ortho-monooxygenase (TOM) from Burkholderia cepacia G4, and toluene/ortho-xylene monooxygenase (ToMO) from P. stutzeri OX1. T4MO oxidized toluene (12.1+/-0.8 nmol/min/mg protein at 109 microM), naphthalene (7.7+/-1.5 nmol/min/mg protein at 5 mM), and fluorene (0.68+/-0.04 nmol/min/mg protein at 0.2 mM) faster than the other wildtype enzymes (2-22-fold) and produced a mixture of 1-naphthol (52%) and 2-naphthol (48%) from naphthalene, which was successively transformed to a mixture of 2,3-, 2,7-, 1,7-, and 2,6-dihydroxynaphthalenes (7%, 10%, 20%, and 63%, respectively). TOM and ToMO made 1,7-dihydroxynaphthalene from 1-naphthol, and ToMO made a mixture of 2,3-, 2,6-, 2,7-, and 1,7-dihydroxynaphthalene (26%, 22%, 1%, and 44%, respectively) from 2-naphthol. TOM had no activity on 2-naphthol, and T4MO had no activity on 1-naphthol. To take advantage of the high activity of wildtype T4MO but to increase its regiospecificity on naphthalene, seven engineered enzymes containing mutations in T4MO alpha hydroxylase TmoA were examined; the selectivity for 2-naphthol by T4MO I100A, I100S, and I100G was enhanced to 88-95%, and the selectivity for 1-naphthol was enhanced to 87% and 99% by T4MO I100L and G103S/A107G, respectively, while high oxidation rates were maintained except for G103S/A107G. Therefore, the regiospecificity for naphthalene oxidation was altered to practically pure 1-naphthol or 2-naphthol. All four wildtype monooxygenases were able to oxidize fluorene to different monohydroxylated products; T4MO oxidized fluorene successively to 3-hydroxyfluorene and 3,6-dihydroxyfluorene, which was confirmed by gas chromatography-mass spectrometry and 1H nuclear magnetic resonance analysis. TOM and its variant TomA3 V106A oxidize fluorene to a mixture of 1-, 2-, 3-, and 4-hydroxyfluorene. This is the first report of using enzymes to synthesize 1-, 3-, and 4-hydroxyfluorene, and 3,6-dihydroxyfluorene from fluorene as well as 2-naphthol and 2,6-dihydroxynaphthalene from naphthalene.     

Toluene-4-monooxygenase, a three-component enzyme system that catalyzes the oxidation of toluene to p-cresol in Pseudomonas mendocina KR1.

Pseudomonas mendocina KR1 grows on toluene as a sole carbon and energy source. A multicomponent oxygenase was partially purified from toluene-grown cells and separated into three protein components. The reconstituted enzyme system, in the presence of NADH and Fe2+, oxidized toluene to p-cresol as the first detectable product. Experiments with p-deutero-toluene led to the isolation of p-cresol which retained 68% of the deuterium initially present in the parent molecule. When the reconstituted enzyme system was incubated with toluene in the presence of 18O2, the oxygen in p-cresol was shown to be derived from molecular oxygen. The results demonstrate that P. mendocina KR1 initiates degradation of toluene by a multicomponent enzyme system which has been designated toluene-4-monooxygenase.     

Altering toluene 4-monooxygenase by active-site engineering for the synthesis of 3-methoxycatechol, methoxyhydroquinone, and methylhydroquinone

Wild-type toluene 4-monooxygenase (T4MO) of Pseudomonas mendocina KR1 oxidizes toluene to p-cresol (96%) and oxidizes benzene sequentially to phenol, to catechol, and to 1,2,3-trihydroxybenzene. In this study T4MO was found to oxidize o-cresol to 3-methylcatechol (91%) and methylhydroquinone (9%), to oxidize m-cresol and p-cresol to 4-methylcatechol (100%), and to oxidize o-methoxyphenol to 4-methoxyresorcinol (87%), 3-methoxycatechol (11%), and methoxyhydroquinone (2%). Apparent V_max values of 6.6 ± 0.9 to 10.7 ± 0.1 nmol/min/ mg of protein were obtained for o-, m-, and p-cresol oxidation by wild-type T4MO, which are comparable to the toluene oxidation rate (15.1 ± 0.8 nmol/min/mg of protein). After these new reactions were discovered, saturation mutagenesis was performed near the diiron catalytic center at positions I100, G103, and A107 of the alpha subunit of the hydroxylase (TmoA) based on directed evolution of the related toluene o-monooxygenase of Burkholderia cepacia G4 (K. A. Canada, S. Iwashita, H. Shim, and T. K. Wood, J. Bacteriol. 184:344-349, 2002) and a previously reported T4MO G103L regiospecific mutant (K. H. Mitchell, J. M. Studts, and B. G. Fox, Biochemistry 41:3176-3188, 2002). By using o-cresol and o-methoxyphenol as model substrates, regiospecific mutants of T4MO were created; for example, TmoA variant G103A/A107S produced 3-methylcatechol (98%) from o-cresol twofold faster and produced 3-methoxycatechol (82%) from 1 mM o-methoxyphenol seven times faster than the wild-type T4MO (1.5 ± 0.2 versus 0.21 ± 0.01 nmol/min/mg of protein). Variant I100L produced 3-methoxycatechol from o-methoxyphenol four times faster than wild-type T4MO, and G103S/A107T produced methylhydroquinone (92%) from o-cresol fourfold faster than wild-type T4MO and there was 10 times more in terms of the percentage of the product. Variant G103S produced 40-fold more methoxyhydroquinone from o-methoxyphenol than the wild-type enzyme produced (80 versus 2%) and produced methylhydroquinone (80%) from o-cresol. Hence, the regiospecific oxidation of o-methoxyphenol and o-cresol was changed for significant synthesis of 3-methoxycatechol, methoxyhydroquinone, 3-methylcatechol, and methylhydroquinone. The enzyme variants also demonstrated altered monohydroxylation regiospecificity for toluene; for example, G103S/A107G formed 82% o-cresol, so saturation mutagenesis converted T4MO into an ortho-hydroxylating enzyme. Furthermore, G103S/A107T formed 100% p-cresol from toluene; hence, a better para-hydroxylating enzyme than wild-type T4MO was formed. Structure homology modeling suggested that hydrogen bonding interactions of the hydroxyl groups of altered residues S103, S107, and T107 influence the regiospecificity of the oxygenase reaction.     

Reaction mechanisms of non-heme diiron hydroxylases characterized in whole cells

Whole cells expressing the non-heme diiron hydroxylases AlkB and toluene 4-monooxygenase (T4MO) were used to probe enzyme reaction mechanisms. AlkB catalyzes the hydroxylation of the radical clock substrates bicyclo[4.1.0]heptane (norcarane), spirooctane and 1,1-diethylcyclopropane, and does not catalyze the hydroxylation of the radical clocks 1,1-dimethylcyclopropane or 1,1,2,2-tetramethylcyclopropane. The hydroxylation of norcarane yields a distribution of products consistent with an "oxygen-rebound" mechanism for the enzyme in both the wild type Pseudomonas putida GPo1 and AlkB from P. putida GPo1 expressed in Escherichia coli. Evidence for the presence of a substrate-based radical during the reaction mechanism is clear. With norcarane, the lifetime of that radical varies with experimental conditions. Experiments with higher substrate concentrations yield a shorter radical lifetime (approximately 1 ns), while experiments with lower substrate concentrations yield a longer radical lifetime (approximately 19 ns). Consistent results were obtained using either wild type or AlkB-equipped host organisms using either "resting cell" or "growing cell" approaches. T4MO expressed in E. coli also catalyzes the hydroxylation of norcarane with a radical lifetime of approximately 0.07 ns. No radical lifetime dependence on substrate concentration was seen. Results from experiments with diethylcyclopropane, spirooctane, dimethylcyclopropane, and diethylcyclopropane are consistent with a restricted active site for AlkB.     

Oxidation of benzene to phenol, catechol, and 1,2,3-trihydroxybenzene by toluene 4-monooxygenase of Pseudomonas mendocina KR1 and toluene 3-monooxygenase of Ralstonia pickettii PKO1

Aromatic hydroxylations are important bacterial metabolic processes but are difficult to perform using traditional chemical synthesis, so to use a biological catalyst to convert the priority pollutant benzene into industrially relevant intermediates, benzene oxidation was investigated. It was discovered that toluene 4-monooxygenase (T4MO) of Pseudomonas mendocina KR1, toluene 3-monooxygenase (T3MO) of Ralstonia pickettii PKO1, and toluene ortho-monooxygenase (TOM) of Burkholderia cepacia G4 convert benzene to phenol, catechol, and 1,2,3-trihydroxybenzene by successive hydroxylations. At a concentration of 165 microM and under the control of a constitutive lac promoter, Escherichia coli TG1/pBS(Kan)T4MO expressing T4MO formed phenol from benzene at 19 +/- 1.6 nmol/min/mg of protein, catechol from phenol at 13.6 +/- 0.3 nmol/min/mg of protein, and 1,2,3-trihydroxybenzene from catechol at 2.5 +/- 0.5nmol/min/mg of protein. The catechol and 1,2,3-trihydroxybenzene products were identified by both high-pressure liquid chromatography and mass spectrometry. When analogous plasmid constructs were used, E. coli TG1/pBS(Kan)T3MO expressing T3MO formed phenol, catechol, and 1,2,3-trihydroxybenzene at rates of 3 +/- 1, 3.1 +/- 0.3, and 0.26 +/- 0.09 nmol/min/mg of protein, respectively, and E. coli TG1/pBS(Kan)TOM expressing TOM formed 1,2,3-trihydroxybenzene at a rate of 1.7 +/- 0.3 nmol/min/mg of protein (phenol and catechol formation rates were 0.89 +/- 0.07 and 1.5 +/- 0.3 nmol/min/mg of protein, respectively). Hence, the rates of synthesis of catechol by both T3MO and T4MO and the 1,2,3-trihydroxybenzene formation rate by TOM were found to be comparable to the rates of oxidation of the natural substrate toluene for these enzymes (10.0 +/- 0.8, 4.0 +/- 0.6, and 2.4 +/- 0.3 nmol/min/mg of protein for T4MO, T3MO, and TOM, respectively, at a toluene concentration of 165 microM).     

Saturation mutagenesis of Bradyrhizobium sp. BTAi1 toluene 4-monooxygenase at alpha-subunit residues proline 101, proline 103, and histidine 214 for regiospecific oxidation of aromatics

A novel toluene monooxygenase (TMO) six-gene cluster from Bradyrhizobium sp. BTAi1 having an overall 35, 36, and 38 % protein similarity with toluene o-xylene monooxygenase (ToMO) of Pseudomonas sp. OX1, toluene 4-monooxygenase (T4MO) of Pseudomonas mendocina KR1, and toluene-para-monooxygenase (TpMO) of Ralstonia pickettii PKO1, respectively, was cloned and expressed in Escherichia coli TG1, and its potential activity was investigated for aromatic hydroxylation and trichloroethylene (TCE) degradation. The natural substrate toluene was hydroxylated to p-cresol, indicating that the new toluene monooxygenase (T4MO·BTAi1) acts as a para hydroxylating enzyme, similar to T4MO and TpMO. Some shifts in regiospecific hydroxylations were observed compared to the other wild-type TMOs. For example, wild-type T4MO·BTAi1 formed catechol (88 %) and hydroquinone (12 %) from phenol, whereas all the other wild-type TMOs were reported to form only catechol. Furthermore, it was discovered that TG1 cells expressing wild-type T4MO·BTAi1 mineralized TCE at a rate of 0.67?±?0.10 nmol Cl^?/h/mg protein. Saturation and site directed mutagenesis were used to generate eight variants of T4MO·BTAi1 at alpha-subunit positions P101, P103, and H214: P101T/P103A, P101S, P101N/P103T, P101V, P103T, P101V/P103T, H214G, and H214G/D278N; by testing the substrates phenol, nitrobenzene, and naphthalene, positions P101 and P103 were found to influence the regiospecific oxidation of aromatics. For example, compared to wild type, variant P103T produced four fold more m-nitrophenol from nitrobenzene as well as produced mainly resorcinol (60 %) from phenol whereas wild-type T4MO·BTAi1 did not. Similarly, variants P101T/P103A and P101S synthesized more 2-naphthol and 2.3-fold and 1.6-fold less 1-naphthol from naphthalene, respectively.     

Oxidation of Benzene to Phenol, Catechol, and 1,2,3-Trihydroxybenzene by Toluene 4-Monooxygenase of Pseudomonas mendocina KR1 and Toluene 3-Monooxygenase of Ralstonia pickettii PKO1

Aromatic hydroxylations are important bacterial metabolic processes but are difficult to perform using traditional chemical synthesis, so to use a biological catalyst to convert the priority pollutant benzene into industrially relevant intermediates, benzene oxidation was investigated. It was discovered that toluene 4-monooxygenase (T4MO) of Pseudomonas mendocina KR1, toluene 3-monooxygenase (T3MO) of Ralstonia pickettii PKO1, and toluene ortho-monooxygenase (TOM) of Burkholderia cepacia G4 convert benzene to phenol, catechol, and 1,2,3-trihydroxybenzene by successive hydroxylations. At a concentration of 165 μM and under the control of a constitutive lac promoter, Escherichia coli TG1/pBS(Kan)T4MO expressing T4MO formed phenol from benzene at 19 ± 1.6 nmol/min/mg of protein, catechol from phenol at 13.6 ± 0.3 nmol/min/mg of protein, and 1,2,3-trihydroxybenzene from catechol at 2.5 ± 0.5nmol/min/mg of protein. The catechol and 1,2,3-trihydroxybenzene products were identified by both high-pressure liquid chromatography and mass spectrometry. When analogous plasmid constructs were used, E. coli TG1/pBS(Kan)T3MO expressing T3MO formed phenol, catechol, and 1,2,3-trihydroxybenzene at rates of 3 ± 1, 3.1 ± 0.3, and 0.26 ± 0.09 nmol/min/mg of protein, respectively, and E. coli TG1/pBS(Kan)TOM expressing TOM formed 1,2,3-trihydroxybenzene at a rate of 1.7 ± 0.3 nmol/min/mg of protein (phenol and catechol formation rates were 0.89 ± 0.07 and 1.5 ± 0.3 nmol/min/mg of protein, respectively). Hence, the rates of synthesis of catechol by both T3MO and T4MO and the 1,2,3-trihydroxybenzene formation rate by TOM were found to be comparable to the rates of oxidation of the natural substrate toluene for these enzymes (10.0 ± 0.8, 4.0 ± 0.6, and 2.4 ± 0.3 nmol/min/mg of protein for T4MO, T3MO, and TOM, respectively, at a toluene concentration of 165 μM).