The roles of surface loop insertions and disulfide bond in the stabilization of thermophilic WF146 protease

Thermophilic WF146 protease possesses four surface loop insertions and a disulfide bond, resembling its psychrophilic (subtilisins S41 and S39) and mesophilic (subtilisins SSII and sphericase) homologs. Deletion of the insertion 3 (positions 193-197) or insertion 4 (positions 210-221) of WF146 protease resulted in a significant decrease of the enzyme stability. In addition, substitution of the residues Pro211 and Ala212 or residue Glu221 which localized in the vicinity of a Ca(2+) binding site of the enzyme by the corresponding residues in subtilisin S41 remarkably reduced the half-life of the enzyme at 70 degrees C, suggesting that the three residues contributed to the thermostability of the enzyme, probably by enhancing the affinity of enzyme to Ca(2+). In the presence of dithiothreitol, the WF146 protease suffered excessive autolysis, indicating that the Cys52-Cys65 disulfide bond played a critical role in stabilizing the WF146 protease against autolysis. The autolytic cleavage sites of the WF146 protease were identified to locate between residues Asn63-Gly64 and Cys65-Ala66 by N-terminal amino acid analysis of the autolytic product. It was noticed that the effect of the autolytic cleavage at Asn63-Gly64 could be compensated by the disulfide bond Cys52-Cys65 under non-reducing condition, and the disulfide bond cross-linked autolytic product remained active. The apparent stabilization effect of the disulfide bond Cys52-Cys65 in the WF146 protease might provide a rational basis for improving the stability of subtilase against autolysis by protein engineering.     

The Venus's-flytrap and cysteine-rich domains of the human Ca2+ receptor are not linked by disulfide bonds

The extracellular N-terminal domain of the human Ca(2+) receptor (hCaR) consists of a Venus's-flytrap (VFT) domain and a cysteine-rich (Cys-rich) domain. We have shown earlier that the Cys-rich domain is critical for signal transmission from the VFT domain to the seven-transmembrane domain. The VFT domain contains 10 cysteines: two of them (Cys(129) and Cys(131)) were identified as involved in intermolecular disulfide bonds necessary for homodimerization, and six others (Cys(60)-Cys(101), Cys(358)-Cys(395), and Cys(437)-Cys(449)) are predicted to form three intramolecular disulfide bonds. The Cys-rich domain contains nine cysteines, the involvement of which in disulfide bond formation has not been defined. In this work, we asked whether the remaining cysteines in the hCaR VFT, namely Cys(236) and Cys(482), form disulfide bond(s) with cysteines in the Cys-rich domain. We constructed mutant hCaRs with a unique tobacco etch virus (TEV) protease recognition site inserted between the VFT domain and the Cys-rich domain. These mutant hCaRs remain fully functional compared with the wild type hCaR. After TEV protease digestion of the mutant hCaR proteins, dimers of the VFT were identified on Western blot under nonreducing conditions. We concluded that there is no disulfide bond between the VFT and the Cys-rich domains in the hCaR.     

Enhanced protease cleavage efficiency on the glucagon-fused interleukin-2 by the addition of synthetic oligopeptides

Human interleukin-2 (hIL-2) was produced as a recombinant fusion protein (G3.IL-2/HF) consisting of three tandem-arranged human glucagon molecules (G3) and hIL-2. For the recovery of hIL-2, a factor Xa (FXa) cleavage sequence was introduced next to the N-terminus of hIL-2. Cleavage efficiency on this recombinant protein construct was very low because its recognition sequence was sterically hindered within the G3.IL-2/HF molecule and hence FXa access to the cleavage site was insufficient. We therefore introduced various synthetic oligopeptides upstream from the FXa cleavage site as a means to change substrate conformation and thereby increase cleavage efficiency. Among these oligopeptides, acidic or nucleophilic constructs were the most effective for the FXa-mediated cleavage of the fusion protein. In addition, insertion of various oligopeptides into the G3.IL-2/HF molecule varied the solubility of each construct depending on their physical properties. Consequently, the G3.IL-2/DF construct showed the highest final hIL-2 yields via FXa-mediated removal of the fusion partner. Lastly, we confirmed that cleavage efficiency was greatly increased but native hIL-2 was cleaved internally by non-specific cleavage when the acidic oligopeptide D4 (DDDD) was introduced upstream of the EK cleavage site within G3.IL-2/HE molecule. The G3.IL-2/HE molecule was shown to be an inefficient substrate to EK in a previous report (Biotechnol. Bioprocess Eng. (2000) 5, 13-16).     

Primary structure of the major pepsin inhibitor from the intestinal parasitic nematode Ascaris suum

The major pepsin inhibitor from Ascaris suum was isolated by affinity chromatography and chromatofocusing. Its amino acid sequence was determined by automated Edman degradation of peptide fragments. Peptides were produced by chemical and enzymatic cleavage of pyridylethylated protein and were purified by reverse-phase high-performance liquid chromatography. The inhibitor consists of 149 residues with the following sequence: QFLFSMSTGP10FICTVKDNQV20FVANLPWTML30EGDDIQVGKE40 FAARVEDCTN50VKHDMAPTCT60KPPPFCGPQD70MKMFNFVGCS80VLGNKLFIDQ90KYVRDLTAK D100 HAEVQTFREK110IAAFEEQQEN120QPPSSGMPHG130AVPAGGLSPP140PPPSFCTVQ149. It has a molecular weight of 16,396. All cysteines are engaged as disulfide bonds: Cys(13)-Cys(59), Cys(48)-Cys(66), and Cys(79)-Cys(146). The protein is probably composed of two domains connected by a short hydrophobic region. This is the first aspartyl protease inhibitor of animal origin that has been sequenced. The sequence has no significant homology with any other known protein.     

Primary structure and disulfide bridge location of arrowhead double-headed proteinase inhibitors.

Two arrowhead proteinase inhibitors (inhibitors A and B) were characterized and their primary structures were determined. Both inhibitors A and B are double-headed and multifunctional protease inhibitors. Inhibitor A inhibits an equimolar amount of trypsin and chymotrypsin simultaneously and weakly inhibits kallikrein. Inhibitor B inhibits two molecules of trypsin simultaneously and inhibits kallikrein more strongly than does inhibitor A. The amino acid sequences of inhibitors A and B were determined by sequencing the reduced and S-carboxamidomethylated proteins and their peptides produced by cyanogen bromide or proteolytic lysylendopeptidase or Staphylococcus aureus V8 protease cleavage. Inhibitors A and B consist of 150 amino acid residues with three disulfide bonds (Cys 43-Cys 89, Cys 110-Cys 119, and Cys 112-Cys 115) and share 90% sequence identity, with 13 different residues. Since the primary structures are totally different from those of all other serine protease inhibitors so far known, these inhibitors might be classified into a new protease inhibitor family.     

Structural and functional significance of disulfide bonds in saxatilin,a 7.7 kDa disintegrin

Saxatilin is a 7.7 kDa disintegrin that belongs to a family of homologous protein found in several snake venoms. Six disulfide bond locations of the disintegrin were determined by enzymatic cleavage and matrix-assisted-laser-desorption-ionization time-of-flight mass spectrometry (MALDI-TOF). Functional implications of the disulfide bonds related to the biological activity of saxatilin were investigated with recombinant protein species produced by site-directed mutagenesis of saxatilin. Several lines of experimental evidence indicated that three disulfide bonds, Cys21-Cys35, Cys29-Cys59, and Cys47-Cys67, of the disintegrin are closely associated with its biological function such as its ability to block the binding of integrin GPIIb-IIIa and alpha(v)beta(3) with fibrinogen and extracellular matrix. Those disulfide linkages were also revealed to be important for maintaining the functional structure of the protein molecule. On the other hand, the disulfide bridges of Cys6-Cys15 and Cys8-Cys16 do not appear to be critical for the molecular structure and function of saxatilin.     

The primary structure and structural characteristics of Achromobacter lyticus protease I, a lysine-specific serine protease

The complete amino acid sequence of Achromobacter lyticus protease I (EC 3.4.21.50), which specifically hydrolyzes lysyl peptide bonds, has been established. This has been achieved by sequence analysis of the reduced and S-carboxymethylated protease and of peptides obtained by enzymatic digestion with Achromobacter protease I itself and Staphylococcus aureus V8 protease and by chemical cleavage with cyanogen bromide. The protease consists of 268 residues with three disulfide bonds, which have been assigned to Cys6-Cys216, Cys12-Cys80, and Cys36-Cys58. Comparison of the amino acid sequence of Achromobacter protease and other serine proteases of bacterial and mammalian origins has revealed that Achromobacter protease I is a mammalian-type serine protease of which the catalytic triad comprises His57, Asp113, and Ser194. It has also been shown that the protease has 9- and 26-residue extensions of the peptide chain at the N and C termini, respectively, and overall sequence homology is as low as 20% with bovine trypsin. The presence of a disulfide bridge between the N-terminal extension Cys6 and Cys216 close to the putative active site in the C-terminal region is thought to be responsible for the generation of maximal proteolytic function in the pH range 8.5-10.7 and enhanced stability to denaturation.     

Structural stability of human alpha-thrombin studied by disulfide reduction and scrambling

Human alpha-thrombin is a very important plasma serine protease, which is involved in physiologically vital processes like hemostasis, thrombosis, and activation of platelets. Knowledge regarding the structural stability of alpha-thrombin is essential for understanding its biological regulation. Here, we investigated the structural and conformational stability of alpha-thrombin using the techniques of disulfide reduction and disulfide scrambling. alpha-Thrombin is composed of a light A-chain (36 residues) and a heavy B-chain (259 residues) linked covalently by an inter-chain disulfide bond (Cys(1)-Cys(122)). The B-chain is stabilized by three intra-chain disulfide bonds (Cys(42)-Cys(58), Cys(168)-Cys(182), and Cys(191)-Cys(220)) (Chymotrypsinogen nomenclature). Upon reduction with dithiothreitol (DTT), alpha-thrombin unfolded in a 'sequential' manner with sequential reduction of Cys(168)-Cys(182) within the B-chain followed by the inter-chain disulfide, generating two distinct partially reduced intermediates, I-1 and I-2, respectively. Conformational stability of alpha-thrombin was investigated by the technique of disulfide scrambling. alpha-Thrombin denatures by scrambling its native disulfide bonds in the presence of denaturant [urea, guanidine hydrochloride (GdmCl) or guanidine thiocyanate (GdmSCN)] and a thiol initiator. During the process, cleavage of the inter-chain disulfide bond and release of the A-chain from B-chain was the foremost event. The three disulfides in the B-chain subsequently scrambled to form three major isomers (designated as X-Ba, X-Bb, and X-Bc). Complete denaturation of alpha-thrombin was observed at low concentrations of denaturants (0.5 M GdmSCN, 1.5 M GdmCl, or 3 M urea) indicating low conformational stability of the protease.     

Disulfide pairing and secondary structure of ASP1, an olfactory-binding protein from honeybee (Apis mellifera L).

In insects, the transport of airborne, hydrophobic odorants and pheromones through the sensillum lymph is accomplished by olfactory-binding proteins (CBPs). We report the structural characterization of a honeybee OBP called ASP1 found in workers and drones, previously observed to bind queen pheromone components. A novel method based on ion-spray mass spectrometry analysis of cyanylation-induced cleavage products of partially reduced protein with Tris(2-carboxyethyl)phosphine was needed to determine the recombinant ASP1 disulfide bond pairing. It was observed to be Cys(I)-Cys(III), Cys(II)-Cys(V), Cys(IV)-Cys(VI), similar to those already described for other OBPs from honeybee and Bombyx mori suggesting that this pattern occurs commonly throughout the diverse family of insect OBPs. Circular dichroism revealed that ASP1 is an all-alpha protein in accordance with NMR preliminary data, but unlike lipocalin-like vertebrate OBPs.     

Comparative model building of interleukin-7 using interleukin-4 as a template: a structural hypothesis that displays atypical surface chemistry in helix D important for receptor activation

Using a combination of theoretical sequence structure recognition predictions and experimental disulfide bond assignments, a three-dimensional (3D) model of human interleukin-7 (hIL-7) was constructed that predicts atypical surface chemistry in helix D that is important for receptor activation. A 3D model of hIL-7 was built using the X-ray crystal structure of interleukin-4 (IL-4) as a template (Walter MR et al., 1992, J Mol Biol. 224:1075-1085; Walter MR et al., 1992, J Biol Chem 267:20371-20376). Core secondary structures were constructed from sequences of hIL-7 predicted to form helices. The model was constructed by superimposing IL-7 helices onto the IL-4 template and connecting them together in an up-up down-down topology. The model was finished by incorporating the disulfide bond assignments (Cys3, Cys142), (Cys35, Cys130), and (Cys48, Cys93), which were determined by MALDI mass spectroscopy and site-directed mutagenesis (Cosenza L, Sweeney E, Murphy JR, 1997, J Biol Chem 272:32995-33000). Quality analysis of the hIL-7 model identified poor structural features in the carboxyl terminus that, when further studied using hydrophobic moment analysis, detected an atypical structural property in helix D, which contains Cys 130 and Cys142. This analysis demonstrated that helix D had a hydrophobic surface exposed to bulk solvent that accounted for the poor quality of the model, but was suggestive of a region in IL-7 that maybe important for protein interactions. Alanine (Ala) substitution scanning mutagenesis was performed to test if the predicted atypical surface chemistry of helix D in the hIL-7 model is important for receptor activation. This analysis resulted in the construction, purification, and characterization of four hIL-7 variants, hIL-7(K121A), hIL-7(L136A), hIL-7(K140A), and hIL-7(W143A), that displayed reduced or abrogated ability to stimulate a murine IL-7 dependent pre-B cell proliferation. The mutant hIL-7(W143A), which is biologically inactive and displaces [125I]-hIL-7, is the first reported IL-7R system antagonist.     

A fluorogenic substrate as quantitative in vivo reporter to determine protein expression and folding of tobacco etch virus protease in Escherichia coli

Quantitative and folding reporters are adequate tools to optimize recombinant protein expression in various host organisms, including Escherichia coli. To determine the yield of soluble active protease from the tobacco etch virus (TEV), we developed a single-molecule assay based on the fluorogenic substrate ANA-QS-MCA. This substrate consists of a 10 amino acid peptide (ENLYFQSGTK) containing the proteolytic cleavage sequence of the TEV protease. The peptide works as a linker N-terminally tagged with a fluorescent donor group (7-Methoxycoumarin-4-yl)acetyl (MCA) and C-terminally tagged with the acceptor group 5-Amino-2-nitrobenzoic acid (ANA). Fluorescence can be observed after specific cleavage of the substrate at the Gln-Ser bond by active TEV protease. Purified His-tagged TEV protease was used for in vitro analysis. Through determination of proteolytic activity in living E. coli cells and through application of Confocal Laser-Scanning-Microscopy we demonstrate that the peptide is well suited to in vivo expression analysis. This provides an effective tool to monitor the accumulation of active recombinant TEV protease in crude extracts and intact cells.     

Expression, purification and structural characterization of recombinant hepcidin, an antimicrobial peptide identified in Japanese flounder, Paralichthys olivaceus

The cysteine-rich peptide hepcidin is an antimicrobial peptide and iron transport regulator that has been found in vertebrates including birds, fish and mammals. To elucidate the structure and biological function of fish hepcidin, which is difficult to produce synthetically, we have cloned several plasmid constructs encoding hepcidin from Japanese flounder, Paralichthys olivaceus, and tested expression of recombinant peptides, each with an N-terminal hexahistidine (6xHis) tag, in inclusion bodies or the periplasmic space of Escherichia coli. Hepcidin expressed in inclusion bodies was reduced, and subsequently refolded using a dilution technique with a cysteine redox system. The oxidized His-hepcidin monomer was separated from protein multimers and mass spectrometry analysis showed that the peptide was of the predicted size and contained four disulfide bonds. Removal of the 6xHis tag was attempted using enzymatic cleavage by Factor Xa and tobacco etch virus (TEV) protease or chemical cleavage by hydroxylamine. The Factor Xa cleavage was unsuccessful and hydroxylamine cleavage resulted in aggregation of cleaved peptide. TEV protease cleavage was successful but immediately resulted in hexamer formation despite varying reaction conditions (redox, non-redox, pH, temperature, target protein concentration, type of buffer). However, the recombinant His-hepcidin fusion peptide monomer showed considerable antimicrobial activity. NMR-based studies showed that hepcidin contained a rare vicinal disulfide linkage at the top of a loop structure and a short beta-sheet structure encompassing residues 7-13 and 19-25 that is stabilized by three disulfide bonds.     

Human acid sphingomyelinase.

Human acid sphingomyelinase (haSMase, EC 3.1.4.12) catalyzes the lysosomal degradation of sphingomyelin to ceramide and phosphorylcholine. An inherited haSMase deficiency leads to Niemann-Pick disease, a severe sphingolipid storage disorder. The enzyme was purified and cloned over 10 years ago. Since then, only a few structural properties of haSMase have been elucidated. For understanding of its complex functions including its role in certain signaling and apoptosis events, complete structural information about the enzyme is necessary. Here, the identification of the disulfide bond pattern of haSMase is reported for the first time. Functional recombinant enzyme expressed in SF21 cells using the baculovirus expression system was purified and digested by trypsin. MALDI-MS analysis of the resulting peptides revealed the four disulfide bonds Cys120-Cys131, Cys385-Cys431, Cys584-Cys588 and Cys594-Cys607. Two additional disulfide bonds (Cys221-Cys226 and Cys227-Cys250) which were not directly accessible by tryptic cleavage, were identified by a combination of a method of partial reduction and MALDI-PSD analysis. In the sphingolipid activator protein (SAP)-homologous N-terminal domain of haSMase, one disulfide bond was assigned as Cys120-Cys131. The existence of two additional disulfide bridges in this region was proved, as was expected for the known disulfide bond pattern of SAP-type domains. These results support the hypothesis that haSMase possesses an intramolecular SAP-type activator domain as predicted by sequence comparison [Ponting, C.P. (1994) Protein Sci., 3, 359-361]. An additional analysis of haSMase isolated from human placenta shows that the recombinant and the native human protein possess an identical disulfide structure.     

Selectivity of tryptophan residues in mediating photolysis of disulfide bridges in goat alpha-lactalbumin

Goat alpha-lactalbumin (GLA) contains four tryptophan (Trp) residues and four disulfide bonds. Illumination with near-UV light results in the cleavage of disulfide bridges and in the formation of free thiols. To obtain information about the reaction products, the illuminated protein was carbamidomethylated and digested with trypsin and the peptides were analyzed by mass spectrometry. Peptides containing Cys120Cam, Cys61Cam, or Cys91Cam were detected, as well as two peptides containing a new Cys-Lys cross-link. In one, Cys6 was cross-linked to Lys122, while the cross-link in the second was either a Cys91-Lys79 or Cys73-Lys93 cross-link; however, the exact linkage could not be defined. The results demonstrate photolytic cleavage of the Cys6-Cys120, Cys61-Cys77, and Cys73-Cys91 disulfide bonds. While photolysis of Cys6-Cys120 and Cys73-Cys91 disulfide bonds in GLA has been reported, cleavage of the Cys61-Cys77 disulfide bonds has not been previously detected. To examine the contribution of the individual Trp residues, we constructed the GLA mutants, W26F, W60F, W104F, and W118F, by replacing single Trp residues with phenylalanine (Phe). The substitution of each Trp residue led to less thiol production compared to that for wild-type GLA, showing that each Trp residue in GLA contributed to the photolytic cleavage of disulfide bridges. The specificity was expressed by the nature of the reaction products. No cleavage of the Cys6-Cys120 disulfide bridge was detected when the W26F mutant was illuminated, and no cleavage of the Cys73-Cys91 disulfide bridge was seen following illumination of W26F or W104F. In contrast, Cys61Cam, resulting from the cleavage of the Cys61-Cys77 disulfide bridge, was found following illumination of any of the mutants.     

An improved strategy for high-level production of TEV protease in Escherichia coli and its purification and characterization

Because of its stringent sequence specificity, tobacco etch virus (TEV) protease emerges as a useful reagent with wide application in the cleavage of recombinant fusion proteins. However, the solubility of TEV protease expressed in Escherichia coli is extremely low. In the present study, we introduced a more efficient system to improve and facilitate the soluble production of TEV protease in E. coli. Optimal expression of soluble His6-TEV was achieved by examining the contribution of chaperone co-expression and lower temperature fermentation. When further purified by Ni(2+) affinity chromatography, 65mg of His6-TEV was isolated with purity over 95% from 1L of culture. The enzyme activity of His6-TEV was generally characterized by using GST-EGFP and His6-L-TNF fusion protein as substrates, which contained a TEV cleavage site between two moieties.     

A new vector for high-throughput,ligation-independent cloning encoding a tobacco etch virus protease cleavage site

To establish high-throughput methods for protein crystallography, all aspects of the production and analysis of protein crystals must be accelerated. Automated, plate-based methods for cloning, expression, and evaluation of target proteins will help researchers investigate the vast numbers of proteins now available from sequenced genomes. Ligation-independent cloning (LIC) is well suited to robotic cloning and expression, but few LIC vectors are available commercially. We have developed a new LIC vector, pMCSG7, that incorporates the tobacco etch virus (TEV) protease cleavage site into the leader sequence. This protease is highly specific and functions under a wide range of conditions. The new vector incorporates an N-terminal his-tag followed by the TEV protease recognition site and a SspI restriction site used for LIC. The vector functioned as expected, giving high cloning efficiencies and strong expression of proteins. Purification and cleavage of a target protein showed that the his-tag and the TEV cleavage site function properly. The protein was purified and cleaved under different conditions to simulate both plate-based screening methods and large-scale purifications for crystal production. The vector also includes a pair of adjacent, unique restriction sites that will allow insertion of additional modules between the his-tag and the cleavage site of the leader sequence to generate a family of vectors suitable for high-throughput production of proteins.     

N-terminal cysteinyl proteins can be prepared using thrombin cleavage

Expressed protein ligation--which allows native proteins to be selectively linked together by a normal peptide bond in an aqueous environment--has emerged as a powerful technique. The technique requires the formation of a C-terminal alpha-thioester and an N-terminal Cys. An N-terminal Cys can be formed by enzymatic cleavage, commonly using the Factor Xa and TEV proteases. We show that thrombin can be used for the formation of N-terminal Cys, providing another choice of reagents for expressed protein ligation. Proteins with N-terminal Cys can be obtained by the convenient modification of vectors with the putative thrombin cleavage site LVPRG to LVPRC. Two example protein domains (Csk and Abl tyrosine kinase domain) with N-terminal Cys are demonstrated using this method. The use of thrombin protease to generate N-terminal Cys overcomes some of the limitations of existing methods, making it generally useful for expressed protein ligation and other biotechnological applications.     

Isolation and characterization of disulfide-bonded peptides from the three globular domains of aggregating cartilage proteoglycan

The aggregating cartilage proteoglycan core protein contains two globular domains near the N terminus (G1 and G2) and one near the C terminus (G3). The G1-G3 domains contain 10, 8, and 10 cysteine residues, respectively. The disulfide assignments of the G1 domain have previously been deduced (Neame, P. J., Christner, J. E., and Baker, J. R. (1987) J. Biol. Chem. 262, 17768-17778) as Cys1-Cys2, Cys3-Cys6, Cys4-Cys5, Cys7-Cys10, and Cys8-Cys9, in which the numbers cited after the half-cystine residues are their relative positions from the N terminus. Here we describe a method for the isolation of disulfide-bonded peptides from tryptic digests of bovine nasal cartilage monomer. Sequence analysis of these peptides has allowed us to confirm the pairings previously determined for the G1 domain and to assign a disulfide pattern for the G2 domain of Cys11-Cys14, Cys12-Cys13, Cys15-Cys18, and Cys16-Cys17, in which the Cys15-Cys18 pairing was deduced indirectly. Similarly, for the G3 domain, a pattern of Cys19-Cys20, Cys21-Cys24, Cys22-Cys23, Cys25-Cys27, and Cys26-Cys28 was assigned, in which the Cys22-Cys23 pair was deduced indirectly. The G2 domain therefore contains disulfide bonding which is characteristic of the tandem repeat structures found in the G1 domain and link protein, and the G3 domain contains the three disulfide linkages previously assigned to the family of C-type animal lectins. The method described here, which combines anion-exchange, cation-exchange, and reversed-phase chromatography, should have broad application to the isolation of disulfide-bonded peptides from other heavily glycosylated proteins and proteoglycans.     

Genetic analysis of the short splice variant of the inhibitor of caspase-activated DNase (ICAD-S) in chicken DT40 cells

We have studied the regulation of the caspase-Activated DNase (CAD) by its inhibitor, ICAD. To study the role of ICAD short and long splice forms ICAD-S and ICAD-L, respectively, in vivo, we constructed chicken DT40 cell lines in which the entire coding regions of ICAD alone or ICAD plus CAD were deleted. ICAD and ICAD/CAD double knock-outs lacked both DNA fragmentation and nuclear fragmentation after the induction of apoptosis. We constructed a model humanized system in which human ICAD-L and CAD proteins expressed in DT40 ICAD/CAD double knock-out cells could rescue both DNA fragmentation and stage II chromatin condensation. ICAD-S could not replace ICAD-L as a chaperone for folding active CAD in these cells. However, a modified version of ICAD-S, in which the two caspase-3 cleavage sites were replaced with two tobacco etch virus (TEV) protease cleavage sites (ICAD-S(2TEV)) and which was therefore resistant to caspase cleavage, did inhibit CAD activation upon induction of apoptosis in vivo. Moreover, ICAD-L(2TEV) was functional as a chaperone for the production of active CAD in DT40 cells. In extracts prepared from these cells, we were able to activate CAD by cleavage of ICAD-L(2TEV) with TEV protease under non-apoptotic conditions. Thus, ICAD appears to be the only functional inhibitor of CAD activation in these cell-free extracts. Taken together, these observations indicate that ICAD-S may function together with ICAD-L as a buffer to prevent inappropriate CAD activation, particularly in cells where ICAD-S is the dominant form of ICAD protein.     

Interleukin-2 signalling is modulated by a labile disulfide bond in the CD132 chain of its receptor

Certain disulfide bonds present in leucocyte membrane proteins are labile and can be reduced in inflammation. This can cause structural changes that result in downstream functional effects, for example, in integrin activation. Recent studies have shown that a wide range of membrane proteins have labile disulfide bonds including CD132, the common gamma chain of the receptors for several cytokines including interleukin-2 and interleukin-4 (IL-2 and IL-4). The Cys(183)-Cys(232) disulfide bond in mouse CD132 is susceptible to reduction by enzymes such as thioredoxin (TRX), gamma interferon-inducible lysosomal thiolreductase and protein disulfide isomerase, which are commonly secreted during immune activation. The Cys(183)-Cys(232) disulfide bond is also reduced in an in vivo lipopolysaccharide (LPS)-induced acute model of inflammation. Conditions that lead to the reduction of the Cys(183)-Cys(232) disulfide bond in CD132 inhibit proliferation of an IL-2-dependent T cell clone and concomitant inhibition of the STAT-5 signalling pathway. The same reducing conditions had no effect on the proliferation of an IL-2-independent T cell clone, nor did they reduce disulfide bonds in IL-2 itself. We postulate that reduction of the Cys(183)-Cys(232) disulfide in CD132 inhibits IL-2 binding to the receptor complex. Published data show that the Cys(183)-Cys(232) disulfide bond is exposed at the surface of CD132 and in close contact with IL-2 and IL-4 in their respective receptor complexes. In addition, mutants in these Cys residues in human CD132 lead to immunodeficiency and loss of IL-2 binding. These results have wider implications for the regulation of cytokine receptors in general, as their activity can be modulated by a 'redox regulator' mechanism caused by the changes in the redox environment that occur during inflammation and activation of the immune system.