Copper removal from wastewater using spent-grain as biosorbent

The removal of Cu(II) ions from aqueous solutions using spent-grain was studied. The experimental data fitted the Langmuir isotherm and the maximum adsorption capacity of spent-grain was determined to be 10.47 mg g(-1) dry weight (pH 4.2). Kinetic studies showed the adsorption process followed pseudo second-order rate model. Column studies with synthetic Cu(II) solutions were used to investigate the effects of Cu(II) ion concentration, initial pH, flow rate and the presence of EDTA on the Cu(II) removal performance. When treating the spent-lees, the wastewater from the whisky distilling industry, the reduction of Cu(II) uptake capacity to 77.7% (solution pH adjusted to 4.5 with 1N NaOH) and 31.6% (pH 3.8 without adjustment) was observed compared to Cu(II) uptake capacity when treating synthetic Cu(II) solution. On the basis of the results and that spent-grain is an abundant and by-product from the whisky distilling industry we suggest that it can be economically and effectively applied as a biosorbent for the removal of Cu(II) ions from distilling wastewaters.     

Assessing greenhouse gas emissions from peatlands using vegetation as a proxy

Drained peatlands in temperate Europe are a globally important source of greenhouse gas (GHG) emissions. This article outlines a methodology to assess emissions and emission reductions from peatland rewetting projects using vegetation as a proxy. Vegetation seems well qualified for indicating GHG fluxes from peat soils as it reflects long-term water level, affects GHG emissions via assimilate supply and aerenchyma and allows fine-scaled mapping. The methodology includes mapping of vegetation types characterised by the presence and absence of species groups indicative for specific water level classes. GHG flux values are assigned to the vegetation types following a standardized protocol and using published emission values from plots with similar vegetation and water level in regions with similar climate and flora. Carbon sequestration in trees is accounted for by estimating the annual sequestration in tree biomass from forest inventory data. The method follows the criteria of the Voluntary Carbon Standard and is illustrated using the example of two Belarusian peatlands.     

Improved flax regeneration from hypocotyls using thidiazuron as a cytokinin source

Summary The effects of thidiazuron, benzyladenine and zeatin were tested with respect to bud regeneration of different flax explants from hypocotyls, cotyledons and apices of two fibre varieties (Ariane, Viking) and one linseed variety (Antarès). These three cytokinins were tested either alone or in combination with naphthalene acetic acid, indole acetic acid or 2,4-dichlorophenoxyacetic acid.Hypocotyls were the most responsive explants. Thidiazuron was significantly the most effective followed by benzyladenine, and then zeatin, in inducing organogenesis from hypocotyl segments. The optimal thidiazuron concentration for bud regeneration from hypocotyls was 0.1–0.3 M in combination with 0.01 M of naphthalene acetic acid. Six days after plating, shoot initials began to appear on hypocotyl sections compared with ten to fifteen days when using benzyladenine or zeatin.     

以聚羟基丁酸戊酸共聚酯为碳源去除循环水养殖系统的硝酸盐及生物膜中微生物群落动态

【目的】利用聚羟基丁酸戊酸共聚酯(PHBV)作为固体碳源和生物膜载体,去除循环水养殖系统的硝酸盐,并研究固体碳源反硝化反应器不同运行阶段生物膜中微生物群落结构的动态变化。【方法】采用PCR-DGGE技术对反硝化反应器中微生物群落结构的动态变化进行了分析,采用传统纯培养方法分离反应器中降解PHBV的细菌。【结果】连接固相反硝化反应器能使循环水养殖系统中积累的硝酸盐显著降低,并维持在较低水平(小于10 mg/L),而常规循环水养殖系统中硝酸盐浓度持续增加。系统发育树聚类分析结果表明,反硝化反应器生物膜细菌归属于变形菌门(β-proteobacteria、γ-proteobacteria和δ-proteobacteria)、厚壁菌门(Firmicutes)和拟杆菌门(Bacteroidetes)。反应器运行初期(40 d)的优势种群主要为Acidovorax和Bacillus;运行后期(150 d)的优势种群依次为Clostridium、Desulfitobacterium、Dechloromonas、Pseudoxanthomonas和Flavobacterium。从反应器中分离到的PHBV降解菌株分别归属于Acidovorax、Methylibium、Pseudoxanthomonas和Dechloromonas。【结论】利用PHBV为碳源能有效去除循环水养殖系统的硝酸盐。明确了反硝化反应器在运行过程中,碳源表面生物膜的优势菌群及其动态变化。     

Production of biodiesel and lactic acid from rapeseed oil using sodium silicate as catalyst

Biodiesel and lactic acid from rapeseed oil was produced using sodium silicate as catalyst. The transesterification in the presence of the catalyst proceeded with a maximum yield of 99.6% under optimized conditions [3% (w/w) sodium silicate, methanol/oil molar ratio 9/1, reaction time 60 min, reaction temperature 60 °C, and stirring rate 250 rpm]. After six consecutive transesterification reactions, the catalyst was collected and used for catalysis of the conversion of glycerol to lactic acid. A maximum yield of 80.5% was achieved when the reaction was carried out at a temperature of 300 °C for 90 min. Thus, sodium silicate is an effective catalyst for transesterification and lactic acid production from the biodiesel by-product, glycerol.     

RNAi gene silencing using cerasome as a viral-size siRNA-carrier free from fusion and cross-linking

Surface-rigidified cerasomes (ceramic-coated liposomes) are neither fused nor cross-linked when bound to siRNA (short duplex RNA) but not to plasmid DNA (long duplex DNA) which induces cross-linking. Non-ceramic reference liposomes are easily fused by the siRNA. The cerasome can thus be used as a viral-size siRNA-carrier in a wide range of concentration for RNAi silencing of exogenous and endogenous genes.     

Precipitation of lysozyme nanoparticles from dimethyl sulfoxide using carbon dioxide as antisolvent

The protein lysozyme has been precipitated as amorphous nanoparticles from a DMSO solution using dense carbon dioxide as antisolvent, by applying the so-called gas antisolvent recrystallization technique in a 400-mL precipitator. The objective is to investigate the possibility of tuning the particle properties by changing the key process parameters, namely, antisolvent addition rate, initial solute concentration, and temperature. It is shown that none of these operating parameters has a major effect on the average particle size or the particle size distribution. The former is mostly between 200 and 300 nm and exhibits no evident trend. The latter is always unimodal and rather narrow and exhibits increasing agglomeration at higher temperature and initial solute concentration. Up to 75% of the protein activity measured in the starting crystalline material is retained by the precipitated amorphous nanoparticles. The present experimental results compare well with data about the same system obtained in a different experimental setup, which were previously reported in the literature, thus pointing at the reproducibility and robustness of GAS antisolvent recrystallization. Moreover, these are consistent with the theoretical understanding of gas antisolvent recrystallization as achieved by using a recently developed model of the process.     

Specificity studies on alpha-mannosidases using oligosaccharides from mannosidosis urine as substrates.

Oligosaccharides containing terminal non-reducing alpha(1 leads to 2)-, alpha(1 leads to 3)-, and alpha(1 leads to 6)-linked mannose residues, isolated from human and bovine mannosidosis urines were used as substrates to test the specificities of acidic alpha-mannosidases isolated from human and bovine liver. The enzymes released all the alpha-linked mannose residues from each oligosaccharide and were most effective on the smallest substrate. Enzyme A in each case was less active on the oligosaccharides than alpha-mannosidase B2, even though the apparent Km value for the substrates was the same with each enzyme. The human acidic alpha-mannosidases were also found to be more active on substrates isolated from human rather than bovine mannosidosis urine. Human alpha-mannosidase C, which has a neutral pH optimum when assayed with a synthetic substrate, did not hydrolyse any of the oligosaccharides at neutral pH, but was found to be active at an acidic pH.     

Production of tannase from wood-degrading fungus using as substrate plant residues: purification and characterization

In the present study Lenzites elegans, Schizophyllum commune, Ganoderma applanatum and Pycnoporus sanguineus (wood-degrading fungi) were assayed for their tannase producing potential in culture media containing plant residues or/and tannic acid as carbon source. Aspergillus niger was used as positive control for tannase production. We also carried out the isolation, purification and characterization of the enzyme from the fungi selected as the major productor. The highest fungal growth was observed in A. niger and L. elegans in the media containing tannic acid + glucose + plant residues (Fabiana densa). A. niger and L. elegans reached the highest extracellular tannase production in a medium containing tannic acid + F. densa and in a medium supplemented with glucose + tannic acid + F. densa. The produced enzyme by L. elegans was purified by DEAE-Sepharose. Km value was 5.5 mM and relative molecular mass was about 163,000. Tannase was stable at a pH range 3.0–6.0 and its optimum pH was 5.5. The enzyme showed an optimum temperature of 60°C and was stable between 40 and 60°C. This paper is the first communication of tannase production by wood-degrading fungi. Fermentation technology to produce tannase using plant residues and xylophagous fungi could be very important in order to take advantage of plant industrial waste.     

Pseudomonas aeruginosa LBI production as an integrated process using the wastes from sunflower-oil refining as a substrate

Pseudomonas aeruginosa LBI produced surface active rhamnolipids when cultivated on waste from the sunflower-oil process under different conditions. These biosurfactants, which reduce the superficial and interfacial tensions between fluids, offer advantages over their chemical counterparts, especially because of their ecological acceptability. These molecules can be used in fields as diverse as chemical, pharmaceutical and petrochemical industries. In this work, we present the effect of C/N ratio on growth and production yield. The best production yields (Y P/S) were achieved for C/N ratios (in g/g) of 8/1 (0.22) and 6.4/1 (0.23). The product concentration was very satisfactory (7.3g/L) at C/N ratio of 8/1, especially when considering that the substrate was basically composed of wastes that would otherwise constitute an environmental disposal problem.     

Production of lactic acid from whey using hydrolysed whey protein as nitrogen source

Summary Hydrolysed whey (lactose 4% w/vol) was fermented in laboratory reactors for production of lactic acid. By using a non0sterile unsupplemented continuous process with a hydraulic retention time of 10 hours, lactic acid was produced in a concentration of approx. 2.5 w/vol % with less than 0.1% volatile fatty acids and less than 0.2% lactose/galactose present in the effluent.     

Enzymatic production of biodiesel from cotton seed oil using t-butanol as a solvent

The enzymatic production of biodiesel by methanolysis of cottonseed oil was studied using immobilized Candida antarctica lipase as catalyst in t-butanol solvent. Methyl ester production and triacylglycerol disappearance were followed by HPLC chromatography. It was found, using a batch system, that enzyme inhibition caused by undissolved methanol was eliminated by adding t-butanol to the reaction medium, which also gave a noticeable increase of reaction rate and ester yield. The effect of t-butanol, methanol concentration and temperature on this system was determined. A methanolysis yield of 97% was observed after 24h at 50 degrees C with a reaction mixture containing 32.5% t-butanol, 13.5% methanol, 54% oil and 0.017 g enzyme (g oil)(-1). With the same mixture, a 95% ester yield was obtained using a one step fixed bed continuous reactor with a flow rate of 9.6 mlh(-1) (g enzyme)(-1). Experiments with the continuous reactor over 500 h did not show any appreciable decrease in ester yields.     

Affinity chromatography of pancreatic carboxypeptidases using a carboxypeptidase inhibitor from potatoes as ligand

A two-step purification scheme based on affinity chromatography has been developed for bovine and porcine carboxypeptidases A and B. Enzyme preparations of high purity are achieved from extracts of pancreatic acetone powder in less than 1 day by this procedure. The application of trypsin-treated extracts of pancreatic acetone powder to immobilized carboxypeptidase inhibitor from potatoes results in the specific retention of the target exopeptidases. After clution of the bound carboxypeptidases A and B at high pH, the resultant mixture of the two enzymes is resolved by chromatography on a column of ?-amino-n-caproyl-d-arginine-Sepharose 4B. Overall yields of 70–80% of the purified enzymes have been obtained with no cross-contamination of detectable tryptic or chymotryptic activities of the preparations.     

Enzymatic production of ethanol from cellulose using soluble cellulose acetate as an intermediate

A two-stage process for the enzymatic conversion of cellulose to ethanol is proposed as an alternative to currently incomplete and relatively slow enzymatic conversion processes employing natural insoluble cellulose. This alternative approach is designed to promote faster and more complete conversion of cellulose to fermentable sugars through the use of a homogeneous enzymatic hydrolysis reaction. Cellulose is chemically dissolved in the first stage to form water-soluble cellulose acetate (WSCA). The WSCA is then converted to ethanol in a simultaneous saccharification-fermentation with Pestal-otiopsis westerdijkii enzymes (containing cellulolytic and acetyl esterase components) and yeast.Water-soluble cellulose acetate was successfully prepared from purified wood cellulose (Solka Floe) and chemical reagents. Enzyme pretreatment of WSCAto form metabolizable sugars was a necessary step in achieving practical conversion of WSCA to ethanol using yeast. The results showed that WSCA has a low enzyme requirement and a high convertibility to reducing sugars with enzymes from P. westerdijkii fungus. Pestalotiopsis westerdijkii enzymes were found to be superior to enzymes from Trichoderma viride in producing metabolizable glucose from WSCA. The yeast utilized 55-70% of the hydrolyzate sugars that were produced by P. westerrlijkii enzymes on WSCA and produced ethanol. The acetate that was liberated into solution by the action of acetyl esterase enzymes on WSCA was found to have a stimulatory effect on ethanol production in yeast. This is an important feature that can be used to advantage in manipulating the conversion to maximize the production of ethanol. Hence, the simultaneous saccharification-fermentation of WSCA to ethanol using P. westerdijkii enzymes and yeast has features that are highly desirable for developing an economical cellulose conversion process.     

Measuring expansion from macro‐ to nanoscale using NPC as intrinsic reporter

Expansion microscopy is a super‐resolution method that allows expanding uniformly biological samples, by increasing the relative distances among fluorescent molecules labeling specific components. One of the main concerns in this approach regards the isotropic behavior at the nanoscale. The present study aims to determine the robustness of such a technique, quantifying the expansion parameters i.e. scale factor, isotropy, uniformity. Our focus is on the nuclear pore complex (NPC), as well‐known nanoscale component endowed of a preserved and symmetrical structure localized on the nuclear envelope. Here, we show that Nup153 is a good reporter to quantitatively address the isotropy of the expansion process. The quantitative analysis carried out on NPCs, at different spatial scales, allows concluding that expansion microscopy can be used at the nanoscale to measure subcellular features with an accuracy from 10 to 5 nm. Therefore, it is an excellent method for structural studies of macromolecular complexes.     

Biosorptive-flotation of copper(II) from environmental water samples using sugar beet pulp as sorbent and oleic acid as surfactant

Abstract

Wounds are likely to have existed ever since mankind has existed. Wound healing is an enormously complicated process and the actual scientific mechanisms and events that take place during healing are far more complex and dynamic than might be imagined. Essential elements, especially trace elements are believed to be pivotal to the wound healing process. Their involvement in tissue regeneration and repair appears to be wide ranging and their deficiencies have been reported to impair the healing process. However, further research is required to establish the involvement of trace elements and their specific species in the wound healing process.

Thus assessments of trace element levels in wound tissues using new, reliable, verified and validated technologies could be beneficial for trace element based wound healing. Here, is an attempt made to assess the link between trace element concentrations and healing processes of chronic and acute wounds. Wound tissue samples from 58 chronic leg ulcers and 50 acute wounds were analysed for concentrations of Fe, Zn, Cu, Mn, Ca, Sn, Cr, Cd and Pb using atomic absorption spectrophotometer. Blood samples were also collected from the same patients and analysed in the same manner. All the data were tested for normality by Ryan–Joiner normality test (α = 0.05) and one-way ANOVA was done for the normally distributed data.

The results showed that the concentration of Ca, Zn, Cu and Mn were similar in both acute and chronic wounds. Apart from Ca, which showed elevated concentrations, other metal concentrations are either similar or lower than the analysed concentrations in blood. It appears that there is a significant difference in the concentrations of iron accumulated in the tissues of chronic and acute wounds.

The concentrations of Sn, Cr, Cd and Pb, which are considered as toxic metals, were not present in detectable levels with the graphite furnace atomic absorption spectrophotometry in both types of wound tissues.