Analysis of separate isolates of Bordetella pertussis repeated DNA sequences

Two independent isolates of a Bordetella pertussis repeated DNA unit were sequenced and shown to be an insertion sequence element with five nucleotide differences between the two copies. The sequences were 1053 bp in length with near-perfect terminal inverted repeats of 28 bp, had three open reading frames, and were each flanked by short direct repeats. The two insertion sequences showed considerable homology to two other B. pertussis repeated DNA sequences reported recently: IS481 and a 530 bp repeated DNA unit. The B. pertussis insertion sequence would appear to comprise a group of closely related sequences differing mainly in flanking direct repeats and the terminal inverted repeats. The two isolates reported here, which were from the adenylate cyclase and agglutinogen 2 regions of the genome, were numbered IS48lvl and IS48lv2 respectively.     

Nucleotide sequence of Rhizobium meliloti insertion sequence ISRm1: homology to IS2 from Escherichia coli and IS426 from Agrobacterium tumefaciens.

Nucleotide sequencing of Rhizobium meliloti insertion sequence ISRm1 showed that it is 1319 nucleotides long and includes 32/31 nucleotide terminal inverted repeats. Analysis of five different insertion sites using sequencing primers complementary to sequences within the left and right ends demonstrated that ISRm1 generates five bp direct repeats at the sites of insertion. Although ISRm1 has shown a target preference for certain short regions (hot spots), there was no apparent similarity in the DNA sequences near the insertion sites. On one strand ISRm1 contains two contiguous open reading frames (ORFs) spanning most of its length. ISRm1 was found to have over 50% sequence homology to insertion sequences IS2 from Escherichia coli and IS426 from Agrobacterium tumefaciens. Their sizes, the sequences of their inverted repeats, and the characteristics of their insertion sites are also comparable, indicating that ISRm1, IS2 and IS426 belong to a class of related insertion sequences. Comparison of the proteins potentially encoded by these insertion sequences showed that the two ORFs found in ISRm1 are also present in IS2 and IS426, suggesting that they may be functional genes.     

Nucleotide sequence and characterization of a new insertion element, IS240, from Bacillus thuringiensis israelensis

The nucleotide sequence of two repeated sequences (RS) in opposite orientations flanking the 125-kDa toxin gene of Bacillus thuringiensis israelensis (C. Bourgouin et al., J. Bacteriol. 170, 3575-3583, 1988) is reported in this paper. The analysis of these sequences indicates that these two RS display characteristic features of bacterial insertion sequences (IS) and are therefore referred to as IS240. IS240 B is 865 bp long and has two perfect terminal-inverted repeats of 16 bp; IS240 A is 99% identical to IS240 B. A long open reading frame encoding a polypeptide of 235 amino acids spans almost the entire sequence of both IS240 elements. Both the sequence of the inverted repeats and the putative transposases are homologous to IS26 of Proteus vulgaris, IS15-delta of Salmonella panama, IS431 of Staphylococcus aureus, and ISS1 of Streptococcus lactis.     

Characterization of insertion sequence IS892 and related elements from the cyanobacterium Anabaena sp. strain PCC 7120.

IS892, one of the several insertion sequence (IS) elements discovered in Anabaena sp. strain PCC 7120 (Y. Cai and C. P. Wolk, J. Bacteriol. 172:3138-3145, 1990), is 1,675 bp with 24-bp near-perfect inverted terminal repeats and has two open reading frames (ORFs) that could code for proteins of 233 and 137 amino acids. Upon insertion into target sites, this IS generates an 8-bp directly repeated target duplication. A 32-bp sequence in the region between ORF1 and ORF2 is similar to the sequence of the inverted termini. Similar inverted repeats are found within each of those three segments, and the sequences of these repeats bear some similarity to the 11-bp direct repeats flanking the 11-kb insertion interrupting the nifD gene of this strain (J. W. Golden, S. J. Robinson, and R. Haselkorn, Nature [London] 314:419-423, 1985). A sequence similar to that of a binding site for the Escherichia coli integration host factor is found about 120 bp from the left end of IS892. Partial nucleotide sequences of active IS elements IS892N and IS892T, members of the IS892 family from the same Anabaena strain, were shown to be very similar to the sequence of IS892.     

Identification, DNA sequence, and distribution of IS981, a new, high-copy-number insertion sequence in lactococci.

An insertion in the lactococcal plasmid pGBK17, which inactivated the gene(s) encoding resistance to the prolate-headed phage c2, was cloned, sequenced, and identified as a new lactococcal insertion sequence (IS). IS981 was 1,222 bp in size and contained two open reading frames, one large enough to encode a transposase. IS981 ended in imperfect inverted repeats of 26 of 40 bp and generated a 5-bp direct repeat of target DNA at the site of insertion. IS981 was present on the chromosome of Lactococcus lactis subsp. lactis LM0230 from where it transposed to pGBK17 during transformation. Twenty-three strains of lactococci examined for the presence of IS981 by Southern hybridization showed 4 to 26 copies per genome, with L. lactis subsp. cremoris strains containing the highest number of copies. Comparison of the DNA sequence and the amino acid sequence of the long open reading frame to other known sequences showed that IS981 is related to a family of IS elements that includes IS2, IS3, IS51, IS150, IS600, IS629, IS861, IS904, and ISL1.     

Identification, DNA sequence, and distribution of IS981, a new, high-copy-number insertion sequence in lactococci.

An insertion in the lactococcal plasmid pGBK17, which inactivated the gene(s) encoding resistance to the prolate-headed phage c2, was cloned, sequenced, and identified as a new lactococcal insertion sequence (IS). IS981 was 1,222 bp in size and contained two open reading frames, one large enough to encode a transposase. IS981 ended in imperfect inverted repeats of 26 of 40 bp and generated a 5-bp direct repeat of target DNA at the site of insertion. IS981 was present on the chromosome of Lactococcus lactis subsp. lactis LM0230 from where it transposed to pGBK17 during transformation. Twenty-three strains of lactococci examined for the presence of IS981 by Southern hybridization showed 4 to 26 copies per genome, with L. lactis subsp. cremoris strains containing the highest number of copies. Comparison of the DNA sequence and the amino acid sequence of the long open reading frame to other known sequences showed that IS981 is related to a family of IS elements that includes IS2, IS3, IS51, IS150, IS600, IS629, IS861, IS904, and ISL1.     

Characterization of the IS895 family of insertion sequences from the cyanobacterium Anabaena sp. strain PCC 7120.

A family of repetitive elements from the cyanobacterium Anabaena sp. strain PCC 7120 was identified through the proximity of one element to the psbAI gene. Four members of this seven-member family were isolated and shown to have structures characteristic of bacterial insertion sequences. Each element is approximately 1,200 bp in length, is delimited by a 30-bp inverted repeat, and contains two open reading frames in tandem on the same DNA strand. The four copies differ from each other by small insertions or deletions, some of which alter the open reading frames. By using a system designed to trap insertion elements, one of the elements, denoted IS895, was shown to be mobile. The target site was not duplicated upon insertion of the element. Two other filamentous cyanobacterial strains were also found to contain sequences homologous to IS895.     

A new insertion sequence, IS231M, in an autoagglutinable isolate of Bacillus thuringiensis

An insertion sequence was isolated from an autoagglutinable strain of Bacillus thuringiensis. Analysis of its DNA sequence revealed high homology to the IS231 family. The name IS231M is proposed for this new insertion sequence. IS231M is 1652 bp long and is delimited by two imperfect 20-bp inverted repeat sequences with two mismatches, which are flanked by two perfect 11-bp direct repeats (DRs). The region upstream of the open reading frame, presumed to be able to form a stable hairpin structure, is particularly well conserved in IS231M. Based on primary nucleotide sequences, IS231M is most homologous to IS231F and IS231G and most distant from IS231V and IS231W. However, as opposed to the single transposase A ORF found in IS231A, -B, -C, -D, -F, and -G, IS231M has two overlapping open reading frames, ORF1 and ORF2, that could code for polypeptides of 334 and 143 amino acids, respectively. Whether IS231M is a functional transposable element remains to be determined.     

A family of IS1031 elements in the genome of Acetobacter xylinum: nucleotide sequences and strain distribution

An insertion sequence (here called IS 1031A) from Acetobacter xylinum ATCC 23769 has recently been isolated. This study describes the complete nucleotide sequence of IS 1031A as well as the sequences of two novel iso-IS 1031 elements, IS1031C and IS1031D, from A. xylinum ATCC 23769. The three ISs are all exactly 930 bp long, have imperfect terminal inverted repeats of 24 bp for IS1031A and 21 bp for IS1031C and IS1031D, are flanked by three base pair direct repeats, and contain an open reading frame encoding a putative basic protein of 278 amino acids. Because of nucleotide substitutions, IS1031C and IS1031D differ from IS 1031A by 12.9% while IS1031C differs from IS1031D by only 0.6%. Hybridization analyses of total DNA from nine A. xylinum strains showed that all strains contained IS 1031-like elements varying in copy number from three to at least 16. None of three Acetobacter aceti strains examined contained IS1031-like elements. Taken together, the results suggest that A. xylinum contains a family of IS 1031 elements with considerably diversified nucleotide sequences.     

IS861, a group B streptococcal insertion sequence related to IS150 and IS3 of Escherichia coli.

A 1,442-base-pair (bp) insertion sequence (IS861) was identified in the type III group B streptococcal (GBS) strain COH-1. It is flanked by 26-bp imperfect inverted repeats and contains two open reading frames, 1 and 2, encoding 141- and 277-amino-acid proteins, respectively. A 3-bp target sequence, ACA, is duplicated and flanks each inverted repeat. IS861 shares greater than 30% homology with IS3 and IS150 of Escherichia coli, primarily in the region of their putative transposases. Northern (RNA) analysis revealed that RNA is actively transcribed in vivo by IS861 and 17- and 36-kilodalton proteins were synthesized in E. coli maxicell assays. Multiple copies of IS861 were observed throughout the chromosome of COH-1, and one of the copies is located near genes involved in GBS capsule synthesis. IS861 is the first insertion sequence identified in GBS. Its role in GBS and the significance of its relationship to the phylogenetically similar insertion sequences typified by IS150 and IS3 of E. coli are unknown.     

IS1631 occurrence in Bradyrhizobium japonicum highly reiterated sequence-possessing strains with high copy numbers of repeated sequences RSalpha and RSbeta.

From Bradyrhizobium japonicum highly reiterated sequence-possessing (HRS) strains indigenous to Niigata and Tokachi in Japan with high copy numbers of the repeated sequences RSalpha and RSbeta (K. Minamisawa, T. Isawa, Y. Nakatsuka, and N. Ichikawa, Appl. Environ. Microbiol. 64:1845-1851, 1998), several insertion sequence (IS)-like elements were isolated by using the formation of DNA duplexes by denaturation and renaturation of total DNA, followed by treatment with S1 nuclease. Most of these sequences showed structural features of bacterial IS elements, terminal inverted repeats, and homology with known IS elements and transposase genes. HRS and non-HRS strains of B. japonicum differed markedly in the profiles obtained after hybridization with all the elements tested. In particular, HRS strains of B. japonicum contained many copies of IS1631, whereas non-HRS strains completely lacked this element. This association remained true even when many field isolates of B. japonicum were examined. Consequently, IS1631 occurrence was well correlated with B. japonicum HRS strains possessing high copy numbers of the repeated sequence RSalpha or RSbeta. DNA sequence analysis indicated that IS1631 is 2,712 bp long. In addition, IS1631 belongs to the IS21 family, as evidenced by its two open reading frames, which encode putative proteins homologous to IstA and IstB of IS21, and its terminal inverted repeat sequences with multiple short repeats.     

Novel insertion sequence IS1380 from Acetobacter pasteurianus is involved in loss of ethanol-oxidizing ability.

Acetobacter pasteurianus NCI1380, a thermophilic strain isolated from the surface culture of acetic acid fermentation, showed genetic instability to produce at high frequency spontaneous mutants which were deficient in ethanol oxidation because of the loss of alcohol dehydrogenase activity. Southern hybridization experiments with the cloned alcohol dehydrogenase-cytochrome c gene cluster as the probe showed insertion of an unknown DNA fragment into a specific position in the cytochrome c gene in most of the mutant strains. Cloning and sequencing analyses revealed that the inserted sequence was 1,665 bp in length and had a terminal inverted repeat of 15 bp. In addition, this inserted sequence was found to generate a 4-bp duplication at the inserted site upon transposition. The target site specificity was not very strict, but a TCGA sequence appeared to be preferentially used. The inserted sequence contains two long open reading frames of 461 and 222 amino acids which are overlapped and encoded by different strands. Although these open reading frames showed no homology to any protein registered in the DNA data bases, the longer open reading frame contained many basic amino acids (87 of 461), as was observed with transposases of so-called insertion sequence (IS) elements. All of these characteristics are typical of IS elements, and the sequence was named IS1380. The copy number of IS1380 in a cell of A. pasteurianus NCI1380 was estimated to be about 100. Several strains of acetic acid bacteria also contained IS1380 at high copy numbers. These results suggest that IS1380 is associated with the genetic loss of ethanol-oxidizing ability as well as the genetic instability of acetic acid bacteria in general.     

Detection of an IS2-encoded 46-kilodalton protein capable of binding terminal repeats of IS2.

The genome of the transposable element IS2 contains five open reading frames that are capable of encoding proteins greater than 50 amino acids; however, only one IS2 protein of 14 kDa had been detected. By replacing the major IS2 promoter located in the right terminal repeat of IS2 with the T7 promoter to express IS2 genes, we have detected another IS2 protein of 46 kDa. This 46-kDa protein was designated InsAB'. Analyses of the InsAB' sequence revealed motifs that are characteristic of transposases of other transposable elements. InsAB' has the ability to bind both terminal repeat sequences of IS2. It was shown to bind a 27-bp sequence (5'-GTTAAGTGATAACAGATGTCTGGAAAT-3', positions 1316 to 1290 by our numbering system [16 to 42 by the previous numbering system]) located at the inner end of the right terminal repeat and a 31-bp sequence (5'-TTATTTAAGTGATATTGGTTGTCTGGAGATT-3', positions 46 to 16 [1286 to 1316]), including the last 27 bp of the inner end and the adjacent 4 bp of the left terminal repeat of IS2. This result suggests that InsAB' is a transposase of IS2. Since there is no open reading frame capable of encoding a 46-kDa protein in the entire IS2 genome, this 46-kDa protein is probably produced by a translational frameshifting mechanism.     

Transposition in Shigella dysenteriae: isolation and analysis of IS911, a new member of the IS3 group of insertion sequences.

Twenty-nine clear-plaque mutants of bacteriophage lambda were isolated from a Shigella dysenteriae lysogen. Three were associated with insertions in the cI gene: two were due to insertion of IS600, and the third resulted from insertion of a new element, IS911. IS911 is 1,250 base pairs (bp) long, carries 27-bp imperfect terminal inverted repeats, and generates 3-bp duplications of the target DNA on insertion. It was found in various copy numbers in all four species of Shigella tested and in Escherichia coli K-12 but not in E. coli W. Analysis of IS911-mediated cointegrate molecules indicated that the majority were generated without duplication of IS911. They appeared to result from direct insertion via one end of the element and the neighboring region of DNA, which resembles a terminal inverted repeat of IS911. Nucleotide sequence analysis revealed that IS911 carries two consecutive open reading frames which code for potential proteins showing similarities to those of the IS3 group of elements.     

The nucleotide sequence and protein-coding capability of the transposable element IS5

The nucleotide sequence of IS5, a bacterial insertion sequence, has been determined. It is 1195 bp long and contains an inverted terminal repetition of 16 bp with one mismatch. One open reading frame, spanning nearly the entire length of the element, could encode a polypeptide of 338 amino acids. Upon insertion into a DNA segment, IS5 causes a duplication of 4 bp. Based on seven examples, this site of insertion appears to be nonrandom, and the consensus target site sequence is C . T/A . A . G/A (or C/T . T . A/T . G on the opposite strand). The nucleotide sequences of IS5 insertions into the B and cim genes of bacteriophage Mu have allowed tentative identification of the protein-coding frames of B and cim.     

Cloning and sequence of IS1000, a putative insertion sequence from Thermus thermophilus HB8

The complete nucleotide sequences of two copies of a putative insertion sequence IS1000 from Thermus thermophilus HB8 are presented. IS1000 is 1196 base pairs long, contains a long open reading frame which could code for a protein of 317 amino acids, and has imperfect terminal inverted repeats of 6 base pairs (confirmed by the terminal sequencing of 4.5 copies of IS1000), but does not cause a target site duplication. There are at least 6 copies of IS1000 in the genome of T. thermophilus HB8. A search of the GEN-EMBL data base revealed that the putative 317 amino acid protein had significant homology with open reading frames in the transposable elements IS110 of Streptomyces coelicolor and IS492 of Pseudomonas atlantica.     

Isolation and characterization of IS elements repeated in the bacterial chromosome

Shigella sonnei contains repetitive sequences, including an insertion element IS1, which can be isolated as double-stranded DNA fragments by DNA denaturation and renaturation and by treatment with S1 nuclease. In this paper, we describe a method of cloning the IS1 fragments prepared by the S1 nuclease digestion technique into phage M13mp8 RFI DNA. Several clones contained IS1, usually with a few additional bases. We isolated and characterized five other repetitive sequences using this method. One sequence, 1264 base-pairs in length, had terminal inverted repeats and contained two open reading frames. This sequence, called IS600, showed about 44% sequence homology with IS3 and was repeated more than 20 times in the Sh. sonnei chromosome. Another sequence (named IS629, 1310 base-pairs in length), which was repeated six times, was found also to be related to IS3 and thus IS600. Two other sequences (named IS630 and IS640, 1159 and 1092 base-pairs in length, respectively), which were repeated approximately ten times, had characteristic terminal inverted repeats and contained a large open reading frame coding for a protein. The inverted repeat sequences of IS630 were similar to the sequence at one end of IS200, a Salmonella-specific IS element. The fifth sequence, repeated ten times in Sh. sonnei, had about 98% sequence homology with a portion of IS2. The method described here can be applied to the isolation of IS or iso-IS elements present in any other bacterial chromosome.