Polar growth in pollen tubes is associated with spatially confined dynamic changes in cell mechanical properties

Cellular morphogenesis involves changes to cellular size and shape which in the case of walled cells implies the mechanical deformation of the extracellular matrix. So far, technical challenges have made quantitative mechanical measurements of this process at subcellular scale impossible. We used micro-indentation to investigate the dynamic changes in the cellular mechanical properties during the onset of spatially confined growth activities in plant cells. Pollen tubes are cellular protuberances that have a strictly unidirectional growth pattern. Micro-indentation of these cells revealed that the initial formation of a cylindrical protuberance is preceded by a local reduction in cellular stiffness. Similar cellular softening was observed before the onset of a rapid growth phase in cells with oscillating growth pattern. These findings provide the first quantitative cytomechanical data that confirm the important role of the mechanical properties of the cell wall for local cellular growth processes. They are consistent with a conceptual model that explains pollen tube oscillatory growth based on the relationship between turgor pressure and tensile resistance in the apical cell wall. To further confirm the significance of cell mechanics, we artificially manipulated the mechanical cell wall properties as well as the turgor pressure. We observed that these changes affected the oscillation profile and were able to induce oscillatory behavior in steadily growing tubes.     

A Theoretical Model of Jigsaw-Puzzle Pattern Formation by Plant Leaf Epidermal Cells

Plant leaf epidermal cells exhibit a jigsaw puzzle–like pattern that is generated by interdigitation of the cell wall during leaf development. The contribution of two ROP GTPases, ROP2 and ROP6, to the cytoskeletal dynamics that regulate epidermal cell wall interdigitation has already been examined; however, how interactions between these molecules result in pattern formation remains to be elucidated. Here, we propose a simple interface equation model that incorporates both the cell wall remodeling activity of ROP GTPases and the diffusible signaling molecules by which they are regulated. This model successfully reproduces pattern formation observed in vivo, and explains the counterintuitive experimental results of decreased cellulose production and increased thickness. Our model also reproduces the dynamics of three-way cell wall junctions. Therefore, this model provides a possible mechanism for cell wall interdigitation formation in vivo.     

RICE SALT SENSITIVE3 binding to bHLH and JAZ factors mediates control of cell wall plasticity in the root apex

Plasticity of root growth in response to environmental cues and stresses is a fundamental characteristic of plants, in accordance with their sessile lifestyle. This is linked to the balance between plasticity and rigidity of cells in the root apex, and thus is coordinated with the control of cell wall properties. However, mechanisms underlying such harmonization are not well understood, in particular under stressful conditions. We have recently demonstrated that RICE SALT SENSITIVE3 (RSS3), a nuclear factor that mediates restrictive expression of jasmonate-induced genes, plays an important role in root elongation under saline conditions. In this study, we report that loss-of-function of RSS3 results in changes in cell wall properties such as lignin deposition and sensitivity to a cellulose synthase inhibitor, concomitant with altered expression of genes involved in cell wall metabolism. Based on these and previous phenotypic observations of the rss3 mutant, we propose that RSS3 plays a role in the coordinated control of root elongation and cell wall plasticity in the root apex.     

Stress relaxation property of the cell wall and auxin-induced cell elongation

A stress-relaxation method has been developed to measure the mechanical property of the plant cell wall, as a physically defined terms. In the method, the stress relaxation property of the cell wall is simulated with a Maxwell viscoelastic model whose character is represented by four parameters; the minimum relaxation time, To, the relaxation rate, b, the maximum relaxation time, Tm and the residual stress, c. Thus, the mechanical property of the cell wall is represented by the four parameters. Physical and physiological meanings of the parameters are discussed. Auxin effects on the parameters were also studied. The cell elongation is simply thought to be extension of the cell wall under a force. The extension of the cell wall can be simulated by the mechanical property of the cell wall. However, the calculated extension was found to be incomparable to the real cell growth, indicating that there has to be other factors limiting the rate of cell growth. Major factors governing cell growth are discussed to be the cell wall mechanical property, the osmotic potential and water movement in the apoplast. A possibility to predict cell expansion with the three factors was discussed and a novel equation representing cell growth was obtained: $$1/R = 1/R_w + 1/R_p $$ whereR is the rate of cell elongation,R _w is the rate of cell wall extension due to the osmotic pressure andR _p is the rate of cell elongation determined by water conductivity.     

Physics of Root Growth

THE elongation of a plant cell involves the yielding of the cell wall under the action of tensile stresses in the wall¹. The rate of elongation, R, can be expressed simply as R=mW, where m is the extensibility of thé cell wall material and W is the wall pressure. Changes in either m or W have been used to explain the effect of biochemical factors on the growth rate of plant cells^2,3. Cell growth is also affected by the physical environment and this becomes particularly important in the case of plant roots where soil water potential and the mechanical resistance of the soil to deformation can become rate controlling. Working with 3-5 day old radicles of Pisum sativum, growing in soil cores, we have obtained values of wall pressure in terms of these two properties and we find that the rate of root elongation can be described by a simple extensibility equation.     

The role of pectin in plant morphogenesis

The presence of a polysaccharidic cell wall distinguishes plant cells from animal cells and is responsible for fundamental mechanistic differences in organ development between the two kingdoms. Due to the presence of this wall, plant cells are unable to crawl and contract. On the other hand, plant cell size can increase by several orders of magnitude and cell shape can change from a simple polyhedron or cube to extremely intricate. This expansive cellular growth is regulated by the interaction between the cell wall and the intracellular turgor pressure. One of the principal cell wall components involved in temporal and spatial regulation of the growth process is pectin. Through biochemical changes to pectin composition and biochemical configuration, the properties of this material can be altered to trigger specific developmental processes. Here, the roles of pectin in three systems displaying rapid growth - the elongation zone of the root, the tip region of the pollen tube, and organ primordia formation at the shoot apical meristem - are reviewed.     

Chromosaponin I increases mechanical extensibility of lettuce root cell walls

Chromosaponin I (CSI), at 3 m M , stimulates the growth of lettuce roots ( Lactuca sativa L. cv. Grand Rapids) with increasing fresh weight and decreasing root diameter compared with control. To analyze the mechanism of action of CSI, mechanical properties of lettuce root cell walls were examined with a tensiometer and the osmotic potential of the cell sap was measured with a vapor pressure osmometer. The mechanical extensibility of the cell wall was increased by CSI treatment, while the osmotic potential remained constant. Under osmotic stress, through addition of 0.225 M mannitol, the mechanical extensibility of the cell wall was increased before stimulation of growth was observed. These results suggest that cell wall-loosening is involved in the growth stimulation induced by CSI.     

The simulation model of growth and cell divisions for the root apex with an apical cell in application to Azolla pinnata

In contrast to seed plants, the roots of most ferns have a single apical cell which is the ultimate source of all cells in the root. The apical cell has a tetrahedral shape and divides asymmetrically. The root cap derives from the distal division face, while merophytes derived from three proximal division faces contribute to the root proper. The merophytes are produced sequentially forming three sectors along a helix around the root axis. During development, they divide and differentiate in a predictable pattern. Such growth causes cell pattern of the root apex to be remarkably regular and self-perpetuating. The nature of this regularity remains unknown. This paper shows the 2D simulation model for growth of the root apex with the apical cell in application to Azolla pinnata. The field of growth rates of the organ, prescribed by the model, is of a tensor type (symplastic growth) and cells divide taking principal growth directions into account. The simulations show how the cell pattern in a longitudinal section of the apex develops in time. The virtual root apex grows realistically and its cell pattern is similar to that observed in anatomical sections. The simulations indicate that the cell pattern regularity results from cell divisions which are oriented with respect to principal growth directions. Such divisions are essential for maintenance of peri-anticlinal arrangement of cell walls and coordinated growth of merophytes during the development. The highly specific division program that takes place in merophytes prior to differentiation seems to be regulated at the cellular level.     

Cellular Dimorphism in the Maize Root Cortex: Involvement of Microtubules,Ethylene and Gibberellin in the Differentiation of Cellular Behaviour in Postmitotic Growth Zones

Detailed morphometric analysis of cell shapes and an immunofluorescent study of microtubules were carried out on primary roots of Zea mays L. Two types of cells were found to be formed within the postmitotic isodiametric growth (PIG) region of the root cortex that were differentially responsive to low level of exogenous ethylene. The innermost and central cell rows of the cortex were sensitive to ethylene treatment and showed a disturbed distribution of cortical microtubules (CMTs) as well as changed polarity of cell growth, whereas the 2–3 outermost cell rows were less sensitive in this respect. This suggests that post-mitotic cells of the inner cortex are specific targets for ethylene action. These properties of the inner cortex are compatible with its cells being involved in the formation of aerenchyma; they may also favour root growth in compacted soil. By contrast, the specific properties of the outer cortex indicate that this tissue domain is necessary for the gaseous impermeability and the mechanical strengthening of subjacent aerenchymatous cortex, especially in the mature region of the root. Ethylene affected neither the pattern of cortical cell expansion in the meristem nor the position of the PIG region with respect to the root tip. This contrasts with gibberellin-deficiency which affected these parameters in both parts of the cortex. These observations indicate a fundamental difference between the role of these two phytohormones in the morphogenesis and development of maize roots.     

An anisotropic-viscoplastic model of plant cell morphogenesis by tip growth

Plant cell morphogenesis depends critically on two processes: the deposition of new wall material at the cell surface and the mechanical deformation of this material by the stresses resulting from the cell's turgor pressure. We developed a model of plant cell morphogenesis that is a first attempt at integrating these two processes. The model is based on the theories of thin shells and anisotropic viscoplasticity. It includes three sets of equations that give the connection between wall stresses, wall strains and cell geometry. We present an algorithm to solve these equations numerically. Application of this simulation approach to the morphogenesis of tip-growing cells illustrates how the viscoplastic properties of the cell wall affect the shape of the cell at steady state. The same simulation approach was also used to reproduce morphogenetic transients such as the initiation of tip growth and other non-steady changes in cell shape. Finally, we show that the mechanical anisotropy built into the model is required to account for observed patterns of wall expansion in plant cells.     

Cell expansion patterns and directionality of wall mechanical properties in nitella

As a means of assessing the extent to which deformation of isolated walls relates to in vivo cell expansion, the directionality of wall mechanical properties was examined in Nitella. Measurements were made of plastic and elastic deformation and creep under both uniaxial and multiaxial stress conditions. Walls of different structural characteristics were obtained from control, isopropyl N-phenylcarbamate (IPC)-treated and IPC recovery cells. Although microfibrils in the inner portion of the wall were transverse for control and recovery cells but random for IPC cells, all walls had similar over-all microfibrillar orientations. Consequently, differences in wall mechanical properties should reflect structural differences in the inner wall. It is the action of the prevailing stress pattern on the inner, not overall, wall microfibrillar organization which dictates the directionality of growth in Nitella. The results indicate that the directional character of expansion is preserved to a large extent in the mechanical properties of isolated walls, and that most, but not all, of the deformation is determined by the inner wall. In addition, directional differences in the threshold for acid-induced extension varied in accord with the pattern of inner wall microfibrils.     

Pectin and the role of the physical properties of the cell wall in pollen tube growth of<Emphasis Type="Italic"> Solanum chacoense</Emphasis>

The cell wall is one of the structural key players regulating pollen tube growth, since plant cell expansion depends on an interplay between intracellular driving forces and the controlled yielding of the cell wall. Pectin is the main cell wall component at the growing pollen tube apex. We therefore assessed its role in pollen tube growth and cytomechanics using the enzymes pectinase and pectin methyl esterase (PME). Pectinase activity was able to stimulate pollen germination and tube growth at moderate concentrations whereas higher concentrations caused apical swelling or bursting in Solanum chacoense Bitt. pollen tubes. This is consistent with a modification of the physical properties of the cell wall affecting its extensibility and thus the growth rate, as well as its capacity to withstand turgor. To prove that the enzyme-induced effects were due to the altered cell wall mechanics, we subjected pollen tubes to micro-indentation experiments. We observed that cellular stiffness was reduced and visco-elasticity increased in the presence of pectinase. These are the first mechanical data that confirm the influence of the amount of pectins in the pollen tube cell wall on the physical parameters characterizing overall cellular architecture. Cytomechanical data were also obtained to analyze the role of the degree of pectin methyl-esterification, which is known to exhibit a gradient along the pollen tube axis. This feature has frequently been suggested to result in a gradient of the physical properties characterizing the cell wall and our data provide, for the first time, mechanical support for this concept. The gradient in cell wall composition from apical esterified to distal de-esterified pectins seems to be correlated with an increase in the degree of cell wall rigidity and a decrease of visco-elasticity. Our mechanical approach provides new insights concerning the mechanics of pollen tube growth and the architecture of living plant cells.     

Acidic cell elongation drives cell differentiation in the Arabidopsis root

In multicellular systems, the control of cell size is fundamental in regulating the development and growth of the different organs and of the whole organism. In most systems, major changes in cell size can be observed during differentiation processes where cells change their volume to adapt their shape to their final function. How relevant changes in cell volume are in driving the differentiation program is a long‐standing fundamental question in developmental biology. In the Arabidopsis root meristem, characteristic changes in the size of the distal meristematic cells identify cells that initiated the differentiation program. Here, we show that changes in cell size are essential for the initial steps of cell differentiation and that these changes depend on the concomitant activation by the plant hormone cytokinin of the EXPAs proteins and the AHA1 and AHA2 proton pumps. These findings identify a growth module that builds on a synergy between cytokinin‐dependent pH modification and wall remodeling to drive differentiation through the mechanical control of cell walls.     

How to shape a cylinder: pollen tube as a model system for the generation of complex cellular geometry

Expansive growth in plant cells is a formidable problem for biophysical studies, and the mechanical principles governing the generation of complex cellular geometries are still poorly understood. Pollen, the male gametophyte stage of the flowering plants, is an excellent model system for the investigation of the mechanics of complex growth processes. The initiation of pollen tube growth requires first of all, the spatially confined formation of a protuberance. This process must be controlled by the mechanical properties of the cell wall, since turgor is a non-vectorial force. In the elongating tube, cell wall expansion is confined to the apex of the cell, requiring the tubular region to be stabilized against turgor-induced tensile stress. Tip focused surface expansion must be coordinated with the supply of cell wall material to this region requiring the precise, logistical control of intracellular transport processes. The advantage of such a demanding mechanism is the high efficiency it confers on the pollen tube in leading an invasive way of life.     

Overexpression of OsEXPA8, a Root-Specific Gene,Improves Rice Growth and Root System Architecture by Facilitating Cell Extension

Expansins are unique plant cell wall proteins that are involved in cell wall modifications underlying many plant developmental processes. In this work, we investigated the possible biological role of the root-specific α-expansin gene OsEXPA8 in rice growth and development by generating transgenic plants. Overexpression of OsEXPA8 in rice plants yielded pleiotropic phenotypes of improved root system architecture (longer primary roots, more lateral roots and root hairs), increased plant height, enhanced leaf number and enlarged leaf size. Further study indicated that the average cell length in both leaf and root vascular bundles was enhanced, and the cell growth in suspension cultures was increased, which revealed the cellular basis for OsEXPA8-mediated rice plant growth acceleration. Expansins are thought to be a key factor required for cell enlargement and wall loosening. Atomic force microscopy (AFM) technology revealed that average wall stiffness values for 35S::OsEXPA8 transgenic suspension-cultured cells decreased over six-fold compared to wild-type counterparts during different growth phases. Moreover, a prominent change in the wall polymer composition of suspension cells was observed, and Fourier-transform infrared (FTIR) spectra revealed a relative increase in the ratios of the polysaccharide/lignin content in cell wall compositions of OsEXPA8 overexpressors. These results support a role for expansins in cell expansion and plant growth.     

Spatial and Directional Variation of Growth Rates in Arabidopsis Root Apex: A Modelling Study

Growth and cellular organization of the Arabidopsis root apex are investigated in various aspects, but still little is known about spatial and directional variation of growth rates in very apical part of the apex, especially in 3D. The present paper aims to fill this gap with the aid of a computer modelling based on the growth tensor method. The root apex with a typical shape and cellular pattern is considered. Previously, on the basis of two types of empirical data: the published velocity profile along the root axis and dimensions of cell packets formed in the lateral part of the root cap, the displacement velocity field for the root apex was determined. Here this field is adopted to calculate the linear growth rate in different points and directions. The results are interpreted taking principal growth directions into account. The root apex manifests a significant anisotropy of the linear growth rate. The directional preferences depend on a position within the root apex. In the root proper the rate in the periclinal direction predominates everywhere, while in the root cap the predominating direction varies with distance from the quiescent centre. The rhizodermis is distinguished from the neighbouring tissues (cortex, root cap) by relatively high contribution of the growth rate in the anticlinal direction. The degree of growth anisotropy calculated for planes defined by principal growth directions and exemplary cell walls may be as high as 25. The changes in the growth rate variation are modelled.