Live-cell assay to detect antigen-specific CD4+ T-cell responses by CD154 expression

This protocol details a method to identify CD4+ T cells that respond to antigens. The method relies on detection of CD154, a costimulatory cell surface protein that is expressed by CD4+ T cells upon activation, and can be used to purify live CD4+ T cells of diverse function. To detect CD154, fluorescently labeled antibodies are cultured with cell samples, peptides (or whole antigens) and monensin during a 6- to 24-h stimulation period. (Note that the assay is not compatible with brefeldin A.) After stimulation, cells are stained with any other antibodies of interest and then are analyzed by flow cytometry or purified by cell sorting. Unlike other assays, this method allows simultaneous assessment of other cell phenotypes or functions, is compatible with downstream RNA-based assays and preserves cell viability. This protocol can be completed in 9 h.     

Transfection of a DNA/protein complex into nuclei of mammalian cells using polyoma capsids and electroporation

We used empty capsids ofpolyoma virus to transfer DNA fragments and DNA/protein complexes into human cells. We encapsulated labeled and unlabeled single stranded DNA fragments by viral capsids. A complex of DNA with a DNA binding protein, recA, will also be taken up by the capsids, whereas the free protein is not incorporated. We further compared this gentle biological method of DNA transfection with a well-established physical method, electroporation. Electroporation also allows the transfer of DNA as well as protein into cells, although there is no proof that a DNA/protein complex can survive the procedure functionally. Whereas the viability of capsid transfected cells is unaffected (100%), electroporation reduces the viability to 90–95%. On the other hand, the amount of DNA found in the nucleus of electroporated cells is higher than for cells treated with loaded viral capsids.     

In vivo single-cell electroporation for transfer of DNA and macromolecules

Single-cell electroporation allows transfection of plasmid DNA or macromolecules into individual living cells using modified patch electrodes and common electrophysiological equipment. This protocol is optimized for rapid in vivo electroporation of Xenopus laevis tadpole brains with DNA, dextrans, morpholinos and combinations thereof. Experienced users can electroporate roughly 40 tadpoles per hour. The technique can be adapted for use with other charged transfer materials and in other systems and tissues where cells can be targeted with a micropipette. Under visual guidance, an electrode filled with transfer material is placed in a cell body-rich area of the tadpole brain and a train of voltage pulses applied, which electroporates a nearby cell. We show examples of successfully electroporated single cells, instances of common problems and troubleshooting suggestions. Single-cell electroporation is an affordable method to fluorescently label and genetically manipulate individual cells. This powerful technique enables observation of single cells in an otherwise normal environment.     

Four-color, 4-D time-lapse confocal imaging of chick embryos

Our understanding of the molecular mechanisms that direct cell motility, cell division, and cell shaping has benefited from innovations in cell labeling and the ability to resolve intracellular dynamics with multispectral, high-resolution imaging. However, due to difficulties with in vivo cell marking and monitoring, most studies have been restricted to fixed tissue or cells in culture. Here, we report the delivery of multiple (up to four), multicolor fluorescent protein (FP) constructs and four-dimensional (4-D), multispectral time-lapse confocal imaging of cell movements in living chick embryos. Cell cytoskeletal components are fluorescently tagged after microinjection and electroporation of a cocktail of FP constructs into specific regions of chick embryos. We tested 11 different FP constructs in various two-, three-, and four-color combinations using multispectral imaging and linear unmixing to limit the crosstalk between different emission spectra. We monitored intracellular dynamics in individual multicolored migrating cells in vivo and developed a set of advantageous imaging parameters for 4-D time-lapse confocal microscopy. We find that the number of four-color labeled cells in a typical embryo is approximately 10% of the total number of fluorescently labeled cells; this value consistently increases showing that approximately 50% of the total labeled cells have only one-color. We find that multicolored cells are photostable for time-lapses of approximately 2-3 h. Thus, cell labeling with up to four FP color schemes combined with multispectral, 4-D confocal time-lapse imaging offers a powerful tool to simultaneously analyze cellular and molecular dynamics during chick embryogenesis.     

Subcellular imaging in the live mouse

Fluorescent proteins are available in multiple colors and have properties such as intrinsic brightness and high quantum yield that make them optimally suited for in vivo imaging with subcellular resolution in the live mouse. In this protocol, cancer cells in live mice are labeled with green fluorescent protein (GFP) in the nucleus and red fluorescent protein (RFP) in the cytoplasm. GFP nuclear labeling is effected by linkage of GFP to histone H2B, and a retroviral vector is used for cytoplasmic labeling with RFP. Double-labeled cells are injected by various methods. High-resolution imaging systems with microscopic optics, in combination with reversible skin flaps over various organs, enable the imaging of dual-color labeled cells at the subcellular level in live animals. The double transfection and selection procedures described here take 6-8 weeks. Cancer cell trafficking, deformation, extravasation, mitosis and cell death can be imaged with clarity.     

Transient expression of fluorescent fusion proteins in protoplasts of suspension cultured cells

Transient expression of fluorescent fusion proteins in plant cells has dramatically facilitated our study of newly identified genes and proteins. This protocol details an in vivo transient expression system to study the subcellular localization and dynamic associations of plant proteins using protoplasts freshly prepared from Arabidopsis or tobacco BY-2 suspension cultured cells. The method relies on the transformation of DNA constructs into protoplasts via electroporation. The whole protocol is comprised of three major stages: protoplast generation and purification, transformation of DNA into protoplasts via electroporation and incubation of protoplasts for protein analysis. Similar to stably transformed cell lines, transformed protoplasts are compatible with protein localization studies, pharmaceutical drug treatment and western blot analysis. This protocol can be completed within 11-24 h from protoplast production to protein detection.     

Long-Lived Intracellular Single-Molecule Fluorescence Using Electroporated Molecules

Studies of biomolecules in vivo are crucial to understand their function in a natural, biological context. One powerful approach involves fusing molecules of interest to fluorescent proteins to study their expression, localization, and action; however, the scope of such studies would be increased considerably by using organic fluorophores, which are smaller and more photostable than their fluorescent protein counterparts. Here, we describe a straightforward, versatile, and high-throughput method to internalize DNA fragments and proteins labeled with organic fluorophores into live Escherichia coli by employing electroporation. We studied the copy numbers, diffusion profiles, and structure of internalized molecules at the single-molecule level in vivo, and were able to extend single-molecule observation times by two orders of magnitude compared to green fluorescent protein, allowing continuous monitoring of molecular processes occurring from seconds to minutes. We also exploited the desirable properties of organic fluorophores to perform single-molecule Förster resonance energy transfer measurements in the cytoplasm of live bacteria, both for DNA and proteins. Finally, we demonstrate internalization of labeled proteins and DNA into yeast Saccharomyces cerevisiae, a model eukaryotic system. Our method should broaden the range of biological questions addressable in microbes by single-molecule fluorescence.     

Long-Lived Intracellular Single-Molecule Fluorescence Using Electroporated Molecules

Studies of biomolecules in vivo are crucial to understand their function in a natural, biological context. One powerful approach involves fusing molecules of interest to fluorescent proteins to study their expression, localization, and action; however, the scope of such studies would be increased considerably by using organic fluorophores, which are smaller and more photostable than their fluorescent protein counterparts. Here, we describe a straightforward, versatile, and high-throughput method to internalize DNA fragments and proteins labeled with organic fluorophores into live Escherichia coli by employing electroporation. We studied the copy numbers, diffusion profiles, and structure of internalized molecules at the single-molecule level in vivo, and were able to extend single-molecule observation times by two orders of magnitude compared to green fluorescent protein, allowing continuous monitoring of molecular processes occurring from seconds to minutes. We also exploited the desirable properties of organic fluorophores to perform single-molecule Förster resonance energy transfer measurements in the cytoplasm of live bacteria, both for DNA and proteins. Finally, we demonstrate internalization of labeled proteins and DNA into yeast Saccharomyces cerevisiae, a model eukaryotic system. Our method should broaden the range of biological questions addressable in microbes by single-molecule fluorescence.     

In Vivo Labeling Method Using a Genetic Construct for Nanoscale Resolution Microscopy

We demonstrate beam scanning-stimulated emission depletion microscopy with in vivo labeled cells. A red emitting fluorescent dye is introduced into membrane protein fused to a multifunctional reporter protein (HaloTag, Promega, Madison, WI) in live cells. This approach allows superresolution stimulated emission depletion imaging without the limitations of immunofluorescence-based staining.     

Internalization and Observation of Fluorescent Biomolecules in Living Microorganisms via Electroporation

The ability to study biomolecules in vivo is crucial for understanding their function in a biological context. One powerful approach involves fusing molecules of interest to fluorescent proteins such as GFP to study their expression, localization and function. However, GFP and its derivatives are significantly larger and less photostable than organic fluorophores generally used for in vitro experiments, and this can limit the scope of investigation. We recently introduced a straightforward, versatile and high-throughput method based on electroporation, allowing the internalization of biomolecules labeled with organic fluorophores into living microorganisms. Here we describe how to use electroporation to internalize labeled DNA fragments or proteins into Escherichia coli and Saccharomyces cerevisiæ, how to quantify the number of internalized molecules using fluorescence microscopy, and how to quantify the viability of electroporated cells. Data can be acquired at the single-cell or single-molecule level using fluorescence or FRET. The possibility of internalizing non-labeled molecules that trigger a physiological observable response in vivo is also presented. Finally, strategies of optimization of the protocol for specific biological systems are discussed.     

Optimization of an electroporation protocol using the K562 cell line as a model: role of cell cycle phase and cytoplasmic DNAses

The improvement of gene therapy protocols is intimately related to the establishment of efficient gene transfer methods. Electroporation has been increasingly employed in in vitro and in vivo protocols, and much attention has been given to increasing its transfection potential. The method is based on the application of an electric field of short duration and high voltage to the cells, forming reversible pores through which molecules can enter the cell. In this work, we describe the optimization of a protocol for the electroporation of K562 cells involving the combination of electric field, resistance and capacitance values. Using RPMI 1640 as pulsing buffer and 30 μg of pEGFP-N1 plasmid, 875 V cm⁻¹, 500 μF and infinite resistance, we achieved transfection rates of 82.41 ± 3.03%, with 62.89 ± 2.93% cell viability, values higher than those reported in the literature. Analyzing cell cycle after electroporation, with three different electric field conditions, we observed that in a heterogeneous population of cells, viability of G₁ cells is less affected by electroporation than that of cells in late S and G₂/M phases. We also observed that efficiency of electroporation can be improved using the DNAse inhibitor Zn, immediately after the pulse. These results can represent a significant improvement of current methods of electroporation of animal and plant cells.     

Introduction of antibody into viable cells using electroporation

Conditions for labelling an intracellular antigen, p21ras, using electroporation to introduce a fluorescent antibody, are described. Following labelling, cells were evaluated for p21ras associated fluorescence by flow cytometry. Electroporation, sorting, and cell handling parameters were varied to determine optimal conditions for cell viability. Cells were best held in serum containing growth medium both before and after electroporation, while antibody introduction during the electroporation phase was most efficient when carried out in a balanced saline solution. For maximum efficiency of antibody internalization, the antibody needed to be present during electroporation, and medium needed to be replaced several times in the first few hours after electroporation to ensure good cell survival.     

Electroporation of human embryonic stem cells: Small and macromolecule loading and DNA transfection

Cryopreservation, directed differentiation, and genetic manipulation of human embryonic stem cells (hESCs) all require the transport of exogenous small molecules, proteins, or DNA into the cell. The absence of standard small and macromolecule loading techniques in hESCs as well as the inadequacies of current DNA transfection techniques have led us to develop electroporation as an efficient loading and transfection methodology. The electroporation parameters of pulse voltage, duration, and number have been explored and evaluated in terms of cell viability, molecular loading, and transfection efficiency on a per cell basis. Small molecule loading was assessed using propidium iodide (PI) and the disaccharide trehalose. Additionally, protein loading was investigated using a glutathione-S-transferase green fluorescent protein (GST-GFP) conjugate, and DNA transfection optimization was performed by constitutive expression of GFP from a plasmid. The optimum pulse voltage must balance cell viability, which decreases as voltage increases, and loading efficiency, which increases at higher voltages. Short pulse times of 0.05 ms facilitated PI and trehalose loading, whereas 0.5 ms or more was required for GST-GFP loading and DNA transfection. Multiple pulses increased per cell loading of all molecules, though there was a dramatic loss of viability with GST-GFP loading and DNA transfection, likely resulting from the longer pulse duration required to load these molecules.     

Optimizing Electroporation Conditions in Primary and Other Difficult-to-Transfect Cells

Electroporation is a valuable tool for nucleic acid delivery because it can be used for a wide variety of cell types. Many scientists are shifting toward the use of cell types that are more relevant to in vivo applications, including primary cells, which are considered difficult to transfect. The ability to electroporate these cell types with nucleic acid molecules of interest at a relatively high efficiency while maintaining cell viability is essential for elucidating the pathway(s) in which a gene product is involved. We present data demonstrating that by optimizing electroporation parameters, nucleic acid molecules can be delivered in a highly efficient manner. We display transfection results for primary and difficult-to-transfect cell types including human primary fibroblasts, human umbilical vein endothelial cells, Jurkat cells, and two neuroblastoma cell lines [SK-N-SH (human) and Neuro-2A (mouse)] with plasmid DNAs and siRNAs. Our data demonstrate that by determining proper electroporation conditions, glyceraldehyde phosphate dehydrogenase mRNA was silenced in Jurkat cells when compared with negative control siRNA electroporations as early as 4 h post-transfection. Other experiments demonstrated that optimized electroporation conditions using a fluorescently labeled transfection control siRNA resulted in 75% transfection efficiency for Neuro-2A, 93% for human primary fibroblasts, and 94% for HUVEC cells, as analyzed by flow cytometry.     

Multimodality imaging of endothelial progenitor cells with a novel multifunctional probe featuring positive magnetic resonance contrast and near-infrared fluorescence

The multimodal strategy incorporating T1-weighted magnetic resonance imaging (MRI) and near-infrared (NIR) fluorescence imaging can complement their strengths to provide images with high sensitivity and spatial resolution for noninvasively and dynamically monitoring endothelial progenitor cells (EPCs) in potential EPC-dominated therapies. Here we report the development of a protein-based imaging probe, bCD-PLL-Cy5.5 Conjugate 1, in which the bacterial cytosine deaminase (bCD) protein was modified with poly-l-lysine (PLL) that is labeled with imaging reporters, including T1-weighted MRI contrast chelator and NIR fluorophore. Conjugate 1 showed low cytotoxicity in EPCs isolated from the rabbit peripheral blood. The normalized cell viability was maintained above 90% after incubation for 1 to 5 days. Fluorescence microscopy of live cells indicated rapid cellular uptake of Conjugate 1 into EPCs in 15 minutes, and flow cytometry studies demonstrated the time-dependent internalization of Conjugate 1 with maximum uptake 48 hours after the treatment. MRI of phantoms demonstrated significant reduction of the T1 value of the EPC pellet that was pretreated with 2 μM of Conjugate 1 for 24 hours. Our preliminary data suggest that as a multimodal imaging contrast medium, Conjugate 1 offers a promising imaging probe for tracking the delivery and therapeutic response of EPCs in vivo.     

Small heat shock protein as a multifunctional scaffold: integrated tumor targeting and caspase imaging within a single cage

Protein cages have the potential to serve as biomaterials for the targeted therapeutic and imaging systems. As an effort to exploit small heat shock protein (Hsp) cages as multifunctional biomaterials, we demonstrate that chemically and genetically modified Hsp cages permeate the cells via cancer cell binding and subsequent endocytic internalization and can image caspase activity in the live cells. Moreover, we report here that these functional Hsp cages can be specifically accumulated to tumor tissues of tumor-bearing mice when administered intravenously through the lateral tail vein. These tumor-targeting properties could be explained by the prolonged in vivo circulation and enhanced permeability and retention (EPR) effect as well as the ligand-mediated binding to cancer cells. Furthermore, when combined with the caspase sensing ability, our Hsp cage allows us to monitor the therapeutic evaluation after anticancer drug treatment by imaging the caspase activity within tumors. Therefore, we demonstrate that the Hsp cages have multifunctional scaffolds amenable to genetic and chemical modifications without loss of the cagelike architecture and can be exploited as biomedical materials including drug or imaging agent carriers.     

Localized electroporation: a method for targeting expression of genes in avian embryos

Avian embryos are a popular model for cell and developmental biologists. However, analysis of gene function in living embryos has been hampered by difficulties in targeting the expression of exogenous genes. We have developed a method for localized electroporation that overcomes some of the limitations of current techniques. We use a double-barreled suction electrode, backfilled with a solution containing a plasmid-encoding green fluorescent protein (GFP) and a neurophysiological stimulator to electroporate small populations of cells in living embryos. As many as 600 cells express GFP 24-48 h after electroporation. The number of cells that express GFP depends on the number of trains, the pulse frequency and the voltage. Surface epithelial cells and cells deep to the point of electroporation express GFP. No deformities result from electroporations, and neurons, neural crest, head mesenchyme, lens and otic placode cells have been transfected. This method overcomes some of the disadvantages of viral techniques, lipofection and in vivo electroporation. The method will be useful to biologists interested in tracing cell lineage or making genetic mosaic avian embryos.     

High-efficiency transfection of mammalian neurons via nucleofection

Transfection of foreign DNA is widely used to study gene function. However, despite the development of numerous methods, the transfer of DNA into postmitotic cells, such as neurons, remains unsatisfactory with regard to either transfection efficiency or cytotoxicity. Nucleofection overcomes these limitations. Direct electroporation of expression plasmids or oligonucleotides into the nucleus ensures both good cell viability and consistently high transfection rates. This allows biochemical analyses of transfected neurons, for example, western blot analyses of protein levels after RNA interference (RNAi) knockdown or microRNA transfection. We provide comprehensive protocols for performing nucleofection with high efficiency on primary neurons. The focus is on the recently developed 96-well shuttle system, which allows the simultaneous testing of up to 96 different plasmids or experimental conditions. Using this system, reproducible high-throughput expression of various transgenes is now feasible on primary neurons, for example large-scale RNAi analyses to downregulate gene expression. The protocol typically takes between 2 and 3 h.     

Redirecting lipoic acid ligase for cell surface protein labeling with small-molecule probes

Live cell imaging is a powerful method to study protein dynamics at the cell surface, but conventional imaging probes are bulky, or interfere with protein function, or dissociate from proteins after internalization. Here, we report technology for covalent, specific tagging of cellular proteins with chemical probes. Through rational design, we redirected a microbial lipoic acid ligase (LplA) to specifically attach an alkyl azide onto an engineered LplA acceptor peptide (LAP). The alkyl azide was then selectively derivatized with cyclo-octyne conjugates to various probes. We labeled LAP fusion proteins expressed in living mammalian cells with Cy3, Alexa Fluor 568 and biotin. We also combined LplA labeling with our previous biotin ligase labeling, to simultaneously image the dynamics of two different receptors, coexpressed in the same cell. Our methodology should provide general access to biochemical and imaging studies of cell surface proteins, using small fluorophores introduced via a short peptide tag.