Buckley-James-type estimator with right-censored and length-biased data

We present a natural generalization of the Buckley-James-type estimator for traditional survival data to right-censored length-biased data under the accelerated failure time (AFT) model. Length-biased data are often encountered in prevalent cohort studies and cancer screening trials. Informative right censoring induced by length-biased sampling creates additional challenges in modeling the effects of risk factors on the unbiased failure times for the target population. In this article, we evaluate covariate effects on the failure times of the target population under the AFT model given the observed length-biased data. We construct a Buckley-James-type estimating equation, develop an iterative computing algorithm, and establish the asymptotic properties of the estimators. We assess the finite-sample properties of the proposed estimators against the estimators obtained from the existing methods. Data from a prevalent cohort study of patients with dementia are used to illustrate the proposed methodology.     

Case-cohort analysis with accelerated failure time model

Summary .  In a case–cohort design, covariates are assembled only for a subcohort that is randomly selected from the entire cohort and any additional cases outside the subcohort. This design is appealing for large cohort studies of rare disease, especially when the exposures of interest are expensive to ascertain for all the subjects. We propose statistical methods for analyzing the case–cohort data with a semiparametric accelerated failure time model that interprets the covariates effects as to accelerate or decelerate the time to failure. Asymptotic properties of the proposed estimators are developed. The finite sample properties of case–cohort estimator and its relative efficiency to full cohort estimator are assessed via simulation studies. A real example from a study of cardiovascular disease is provided to illustrate the estimating procedure.     

Proportional Hazards Regression for the Analysis of Clustered Survival Data from Case–Cohort Studies

Summary Case–cohort sampling is a commonly used and efficient method for studying large cohorts. Most existing methods of analysis for case–cohort data have concerned the analysis of univariate failure time data. However, clustered failure time data are commonly encountered in public health studies. For example, patients treated at the same center are unlikely to be independent. In this article, we consider methods based on estimating equations for case–cohort designs for clustered failure time data. We assume a marginal hazards model, with a common baseline hazard and common regression coefficient across clusters. The proposed estimators of the regression parameter and cumulative baseline hazard are shown to be consistent and asymptotically normal, and consistent estimators of the asymptotic covariance matrices are derived. The regression parameter estimator is easily computed using any standard Cox regression software that allows for offset terms. The proposed estimators are investigated in simulation studies, and demonstrated empirically to have increased efficiency relative to some existing methods. The proposed methods are applied to a study of mortality among Canadian dialysis patients.     

Improved Horvitz–Thompson Estimation of Model Parameters from Two-phase Stratified Samples: Applications in Epidemiology

The case-cohort study involves two-phase samplings: simple random sampling from an infinite superpopulation at phase one and stratified random sampling from a finite cohort at phase two. Standard analyses of case-cohort data involve solution of inverse probability weighted (IPW) estimating equations, with weights determined by the known phase two sampling fractions. The variance of parameter estimates in (semi)parametric models, including the Cox model, is the sum of two terms: (i) the model-based variance of the usual estimates that would be calculated if full data were available for the entire cohort; and (ii) the design-based variance from IPW estimation of the unknown cohort total of the efficient influence function (IF) contributions. This second variance component may be reduced by adjusting the sampling weights, either by calibration to known cohort totals of auxiliary variables correlated with the IF contributions or by their estimation using these same auxiliary variables. Both adjustment methods are implemented in the R survey package. We derive the limit laws of coefficients estimated using adjusted weights. The asymptotic results suggest practical methods for construction of auxiliary variables that are evaluated by simulation of case-cohort samples from the National Wilms Tumor Study and by log-linear modeling of case-cohort data from the Atherosclerosis Risk in Communities Study. Although not semiparametric efficient, estimators based on adjusted weights may come close to achieving full efficiency within the class of augmented IPW estimators.     

A case-cohort design for assessing covariate effects in longitudinal studies

The case-cohort design for longitudinal data consists of a subcohort sampled at the beginning of the study that is followed repeatedly over time, and a case sample that is ascertained through the course of the study. Although some members in the subcohort may experience events over the study period, we refer to it as the "control-cohort." The case sample is a random sample of subjects not in the control-cohort, who have experienced at least one event during the study period. Different correlations among repeated observations on the same individual are accommodated by a two-level random-effects model. This design allows consistent estimation of all parameters estimable in a cohort design and is a cost-effective way to study the effects of covariates on repeated observations of relatively rare binary outcomes when exposure assessment is expensive. It is an extension of the case-cohort design (Prentice, 1986, Biometrika73, 1-11) and the bidirectional case-crossover design (Navidi, 1998, Biometrics54, 596-605). A simulation study compares the efficiency of the longitudinal case-cohort design to a full cohort analysis, and we find that in certain situations up to 90% efficiency can be obtained with half the sample size required for a full cohort analysis. A bootstrap method is presented that permits testing for intra-subject homogeneity in the presence of unidentifiable nuisance parameters in the two-level random-effects model. As an illustration we apply the design to data from an ongoing study of childhood asthma.     

Joint semiparametric models for case-cohort designs

Two-phase studies such as case-cohort and nested case-control studies are widely used cost-effective sampling strategies. In the first phase, the observed failure/censoring time and inexpensive exposures are collected. In the second phase, a subgroup of subjects is selected for measurements of expensive exposures based on the information from the first phase. One challenging issue is how to utilize all the available information to conduct efficient regression analyses of the two-phase study data. This paper proposes a joint semiparametric modeling of the survival outcome and the expensive exposures. Specifically, we assume a class of semiparametric transformation models and a semiparametric density ratio model for the survival outcome and the expensive exposures, respectively. The class of semiparametric transformation models includes the proportional hazards model and the proportional odds model as special cases. The density ratio model is flexible in modeling multivariate mixed-type data. We develop efficient likelihood-based estimation and inference procedures and establish the large sample properties of the nonparametric maximum likelihood estimators. Extensive numerical studies reveal that the proposed methods perform well under practical settings. The proposed methods also appear to be reasonably robust under various model mis-specifications. An application to the National Wilms Tumor Study is provided.     

Sieve Estimation for the Cox Model with Clustered Interval-Censored Failure Time Data

Clustered interval-censored failure time data occur when the failure times of interest are clustered into small groups and known only to lie in certain intervals. A number of methods have been proposed for regression analysis of clustered failure time data, but most of them apply only to clustered right-censored data. In this paper, a sieve estimation procedure is proposed for fitting a Cox frailty model to clustered interval-censored failure time data. In particular, a two-step algorithm for parameter estimation is developed and the asymptotic properties of the resulting sieve maximum likelihood estimators are established. The finite sample properties of the proposed estimators are investigated through a simulation study and the method is illustrated by the data arising from a lymphatic filariasis study.     

Methods for the Analyses of Case-Cohort Studies

Case-cohort and nested case-control sampling methods have recently been introduced as a means of reducing cost in large cohort studies. The asymptotic distribution theory results for relative rate estimation based on Cox type partial or pseudolikelihoods for case-cohort and nested case-control studies have been accounted for. However, many researchers use (stratified) frequency table methods for a first or primary summarization of the most important evidence on exposure-disease or dose-response relationships, i.e. the classical Mantel-Haenszel analyses, trend tests and tests for heterogeneity of relative rates. These can be followed by exponential failure time regression methods on grouped or individual data to model relationships between several factors and response. In this paper we present the adaptations needed to use these methods with case-cohort designs, illustrating their use with data from a recent case-cohort study on the relationship between diet, life-style and cancer. We assume a very general setup allowing piecewise constant failure rates, possible recurrent events per individual, independent censoring and left truncation.     

Sample size/power calculation for case-cohort studies

In epidemiologic studies and disease prevention trials, interest often involves estimation of the relationship between some disease endpoints and individual exposure. In some studies, due to the rarity of the disease and the cost in collecting the exposure information for the entire cohort, a case-cohort design, which consists of a small random sample of the whole cohort and all the diseased subjects, is often used. Previous work has focused on analyzing data from the case-cohort design and few have discussed the sample size issues. In this article, we describe two tests for the case-cohort design, which can be treated as a natural generalization of log-rank test in the full cohort design. We derive an explicit form for power/sample size calculation based on these two tests. A number of simulation studies have been used to illustrate the efficiency of the tests for the case-cohort design. An example is provided on how to use the formula.     

Nonparametric estimation for the three-stage irreversible illness-death model

In this paper, we present new nonparametric estimators of the stage-occupation probabilities in the three-stage irreversible illness-death model. These estimators use a fractional risk set and a reweighting approach and are valid under stage-dependent censoring. Using a simulated data set, we compare the behavior of our estimators with previously proposed estimators. We also apply our estimators to data on time to Pneumocystis pneumonia and death obtained from an AIDS cohort study.     

Efficient semiparametric estimation of haplotype-disease associations in case-cohort and nested case-control studies

Estimating the effects of haplotypes on the age of onset of a disease is an important step toward the discovery of genes that influence complex human diseases. A haplotype is a specific sequence of nucleotides on the same chromosome of an individual and can only be measured indirectly through the genotype. We consider cohort studies which collect genotype data on a subset of cohort members through case-cohort or nested case-control sampling. We formulate the effects of haplotypes and possibly time-varying environmental variables on the age of onset through a broad class of semiparametric regression models. We construct appropriate nonparametric likelihoods, which involve both finite- and infinite-dimensional parameters. The corresponding nonparametric maximum likelihood estimators are shown to be consistent, asymptotically normal, and asymptotically efficient. Consistent variance-covariance estimators are provided, and efficient and reliable numerical algorithms are developed. Simulation studies demonstrate that the asymptotic approximations are accurate in practical settings and that case-cohort and nested case-control designs are highly cost-effective. An application to a major cardiovascular study is provided.     

Cox Regression in Nested Case–Control Studies with Auxiliary Covariates

Summary Nested case–control (NCC) design is a popular sampling method in large epidemiological studies for its cost effectiveness to investigate the temporal relationship of diseases with environmental exposures or biological precursors. Thomas' maximum partial likelihood estimator is commonly used to estimate the regression parameters in Cox's model for NCC data. In this article, we consider a situation in which failure/censoring information and some crude covariates are available for the entire cohort in addition to NCC data and propose an improved estimator that is asymptotically more efficient than Thomas' estimator. We adopt a projection approach that, heretofore, has only been employed in situations of random validation sampling and show that it can be well adapted to NCC designs where the sampling scheme is a dynamic process and is not independent for controls. Under certain conditions, consistency and asymptotic normality of the proposed estimator are established and a consistent variance estimator is also developed. Furthermore, a simplified approximate estimator is proposed when the disease is rare. Extensive simulations are conducted to evaluate the finite sample performance of our proposed estimators and to compare the efficiency with Thomas' estimator and other competing estimators. Moreover, sensitivity analyses are conducted to demonstrate the behavior of the proposed estimator when model assumptions are violated, and we find that the biases are reasonably small in realistic situations. We further demonstrate the proposed method with data from studies on Wilms' tumor.     

Weighted Likelihood Method for Grouped Survival Data in Case–Cohort Studies with Application to HIV Vaccine Trials

Summary Grouped failure time data arise often in HIV studies. In a recent preventive HIV vaccine efficacy trial, immune responses generated by the vaccine were measured from a case–cohort sample of vaccine recipients, who were subsequently evaluated for the study endpoint of HIV infection at prespecified follow‐up visits. Gilbert et al. (2005, Journal of Infectious Diseases 191 , 666–677) and Forthal et al. (2007, Journal of Immunology 178, 6596–6603) analyzed the association between the immune responses and HIV incidence with a Cox proportional hazards model, treating the HIV infection diagnosis time as a right‐censored random variable. The data, however, are of the form of grouped failure time data with case–cohort covariate sampling, and we propose an inverse selection probability‐weighted likelihood method for fitting the Cox model to these data. The method allows covariates to be time dependent, and uses multiple imputation to accommodate covariate data that are missing at random. We establish asymptotic properties of the proposed estimators, and present simulation results showing their good finite sample performance. We apply the method to the HIV vaccine trial data, showing that higher antibody levels are associated with a lower hazard of HIV infection.     

Cohort case-control design and analysis for clustered failure-time data

Cohort case-control design is an efficient and economical design to study risk factors for disease incidence or mortality in a large cohort. In the last few decades, a variety of cohort case-control designs have been developed and theoretically justified. These designs have been exclusively applied to the analysis of univariate failure-time data. In this work, a cohort case-control design adapted to multivariate failure-time data is developed. A risk set sampling method is proposed to sample controls from nonfailures in a large cohort for each case matched by failure time. This method leads to a pseudolikelihood approach for the estimation of regression parameters in the marginal proportional hazards model (Cox, 1972, Journal of the Royal Statistical Society, Series B 34, 187-220), where the correlation structure between individuals within a cluster is left unspecified. The performance of the proposed estimator is demonstrated by simulation studies. A bootstrap method is proposed for inferential purposes. This methodology is illustrated by a data example from a child vitamin A supplementation trial in Nepal (Nepal Nutrition Intervention Project-Sarlahi, or NNIPS).     

Selecting an efficient design for assessing exposure-disease relationships in an assembled cohort

We develop approximate methods to compare the efficiencies and to compute the power of alternative potential designs for sampling from a cohort before beginning to collect exposure data. Our methods require only that the cohort be assembled, meaning that the numbers of individuals Nkj at risk at pairs of event times tk and tj greater than or equal to tk are available. To compute Nkj, one needs to know the entry, follow-up, censoring, and event history, but not the exposure, for each individual. Our methods apply to any "unbiased control sampling design," in which cases are compared to a random sample of noncases at risk at the time of an event. We apply our methods to approximate the efficiencies of the nested case-control design, the case-cohort design, and an augmented case-cohort design, compared to the full cohort design, in an assembled cohort of 17,633 members of an insurance cooperative who were followed for mortality from prostatic cancer. The assumptions underlying the approximation are that exposure is unrelated both to the hazard of an event and to the hazard for censoring. The approximations performed well in simulations when both assumptions held and when the exposure was moderately related to censoring.     

A marginal mixed baseline hazards model for multivariate failure time data

In multivariate failure time data analysis, a marginal regression modeling approach is often preferred to avoid assumptions on the dependence structure among correlated failure times. In this paper, a marginal mixed baseline hazards model is introduced. Estimating equations are proposed for the estimation of the marginal hazard ratio parameters. The proposed estimators are shown to be consistent and asymptotically Gaussian with a robust covariance matrix that can be consistently estimated. Simulation studies indicate the adequacy of the proposed methodology for practical sample sizes. The methodology is illustrated with a data set from the Framingham Heart Study.     

Estimation for the optimal combination of markers without modeling the censoring distribution

Summary .  In the time-dependent receiver operating characteristic curve analysis with several baseline markers, research interest focuses on seeking appropriate composite markers to enhance the accuracy in predicting the vital status of individuals over time. Based on censored survival data, we proposed a more flexible estimation procedure for the optimal combination of markers under the validity of a time-varying coefficient generalized linear model for the event time without restrictive assumptions on the censoring pattern. The consistency of the proposed estimators is also established in this article. In contrast, the inverse probability weighting (IPW) approach might introduce a bias when the selection probabilities are misspecified in the estimating equations. The performance of both estimation procedures are examined and compared through a class of simulations. It is found from the simulation study that the proposed estimators are far superior to the IPW ones. Applying these methods to an angiography cohort, our estimation procedure is shown to be useful in predicting the time to all-cause and coronary artery disease related death.     

A regularized estimation approach for case-cohort periodic follow-up studies with an application to HIV vaccine trials

This paper discusses regression analysis of the failure time data arising from case-cohort periodic follow-up studies, and one feature of such data, which makes their analysis much more difficult, is that they are usually interval-censored rather than right-censored. Although some methods have been developed for general failure time data, there does not seem to exist an established procedure for the situation considered here. To address the problem, we present a semiparametric regularized procedure and develop a simple algorithm for the implementation of the proposed method. In addition, unlike some existing procedures for similar situations, the proposed procedure is shown to have the oracle property, and an extensive simulation is conducted and it suggests that the presented approach seems to work well for practical situations. The method is applied to an HIV vaccine trial that motivated this study.     

Penalized partial likelihood regression for right-censored data with bootstrap selection of the penalty parameter

The Cox proportional hazards model is often used for estimating the association between covariates and a potentially censored failure time, and the corresponding partial likelihood estimators are used for the estimation and prediction of relative risk of failure. However, partial likelihood estimators are unstable and have large variance when collinearity exists among the explanatory variables or when the number of failures is not much greater than the number of covariates of interest. A penalized (log) partial likelihood is proposed to give more accurate relative risk estimators. We show that asymptotically there always exists a penalty parameter for the penalized partial likelihood that reduces mean squared estimation error for log relative risk, and we propose a resampling method to choose the penalty parameter. Simulations and an example show that the bootstrap-selected penalized partial likelihood estimators can, in some instances, have smaller bias than the partial likelihood estimators and have smaller mean squared estimation and prediction errors of log relative risk. These methods are illustrated with a data set in multiple myeloma from the Eastern Cooperative Oncology Group.     

Semiparametric additive time-varying coefficients model for longitudinal data with censored time origin

Statistical analysis of longitudinal data often involves modeling treatment effects on clinically relevant longitudinal biomarkers since an initial event (the time origin). In some studies including preventive HIV vaccine efficacy trials, some participants have biomarkers measured starting at the time origin, whereas others have biomarkers measured starting later with the time origin unknown. The semiparametric additive time-varying coefficient model is investigated where the effects of some covariates vary nonparametrically with time while the effects of others remain constant. Weighted profile least squares estimators coupled with kernel smoothing are developed. The method uses the expectation maximization approach to deal with the censored time origin. The Kaplan–Meier estimator and other failure time regression models such as the Cox model can be utilized to estimate the distribution and the conditional distribution of left censored event time related to the censored time origin. Asymptotic properties of the parametric and nonparametric estimators and consistent asymptotic variance estimators are derived. A two-stage estimation procedure for choosing weight is proposed to improve estimation efficiency. Numerical simulations are conducted to examine finite sample properties of the proposed estimators. The simulation results show that the theory and methods work well. The efficiency gain of the two-stage estimation procedure depends on the distribution of the longitudinal error processes. The method is applied to analyze data from the Merck 023/HVTN 502 Step HIV vaccine study.