Identification of an ion channel-forming motif in the primary structure of tetanus and botulinum neurotoxins.

Synthetic peptides with amino acid sequences corresponding to predicted transmembrane segments of tetanus toxin were used as probes to identify a channel-forming motif. A peptide denoted TeTx II, with sequence GVVLLLEYIPEITLPVIAALSIA, forms cation-selective channels when reconstituted in planar lipid bilayers. The single channel conductance in 0.5 M NaCl or KCl is 28 +/- 3 and 24 +/- 2 pS, respectively. In contrast, a peptide with sequence NFIGALETTGVVLLLEYIPEIT, denoted as TeTx I, or a peptide with the same amino acid composition as TeTx II but with a randomized sequence, do not form channels. Conformational energy calculations show that a bundle of four amphipathic alpha-helices is a plausible structural motif underlying observable pore properties. The identified functional module may account for the channel-forming activity of both tetanus toxin and the homologous botulinum toxin A.     

The nicotinic acetylcholine receptor: from molecular model to single-channel conductance

The nicotinic acetylcholine receptor (nAChR) is the archetypal ligand-gated ion channel. A model of the α7 homopentameric nAChR is described in which the pore-lining M2 helix bundle is treated atomistically and the remainder of the molecule is treated as a “low resolution” cylinder. The surface charge on the cylinder is derived from the distribution of charged amino acids in the amino acid sequence (excluding the M2 segments). This model is explored in terms of its predicted single-channel properties. Based on electrostatic potential profiles derived from the model, the one-dimensional Poisson-Nernst-Planck equation is used to calculate single-channel current/voltage curves. The predicted single-channel conductance is three times higher (ca. 150 pS) than that measured experimentally, and the predicted ion selectivity agrees with the observed cation selectivity of nAChR. Molecular dynamics (MD) simulations are used to estimate the self-diffusion coefficients (D) of water molecules within the channel. In the narrowest region of the pore, D is reduced ca. threefold relative to that of bulk water. Assuming that the diffusion of ions scales with that of water, this yields a revised prediction of the single-channel conductance (ca. 50 pS) in good agreement with the experimental value. We conclude that combining atomistic (MD) and continuum electrostatics calculations is a promising approach to bridging the gap between structure and physiology of ion channels. Received: 2 August 1999 / Revised version: 5 November 1999 / Accepted: 9 November 1999     

haemolysin of Escherichia coli: Comparison of pore-forming properties between chromosome and plasmid-encoded haemolysins

Abstract Lipid bilayer experiments were performed with chromosome-encoded haemolysin of Escherichia coli . The addition of the toxin to the aqueous phase bathing lipid bilayer membranes of asolectin resulted in the formation of transient ion-permeable channels with two states at small transmembrane voltages. One is prestate (single-channel conductance 40 pS in 0.15 M KCl) of the open state, which had a single-channel conductance of 420 pS in 0.15 M KCl and a mean lifetime of 30 s. Membranes formed of pure lipids were rather inactive targets for this haemolysin. Experiments with different salts suggested that the haemolysin channel was highly cation-selective at neutral pH. The mobility sequence of the cations in the channel was similar if not identical to their mobility sequence in the aqueous phase. The single-channel data were consistent with a wide, water-filled channel with an estimated minimal diameter of about 1 nm. The pore-forming properties of chromosome-encoded haemolysin were compared with those of plasmid-encoded haemolysin. Both toxins share common features, oligomerize probably to form pores in lipid bilayer membranes. Both types of haemolysin channels have similar properties but different lifetimes.     

Design of a functional calcium channel protein: inferences about an ion channel-forming motif derived from the primary structure of voltage-gated calcium channels.

To identify sequence-specific motifs associated with the formation of an ionic pore, we systematically evaluated the channel-forming activity of synthetic peptides with sequence of predicted transmembrane segments of the voltage-gated calcium channel. The amino acid sequence of voltage-gated, dihydropyridine (DHP)-sensitive calcium channels suggests the presence in each of four homologous repeats (I-IV) of six segments (S1-S6) predicted to form membrane-spanning, alpha-helical structures. Only peptides representing amphipathic segments S2 or S3 form channels in lipid bilayers. To generate a functional calcium channel based on a four-helix bundle motif, four-helix bundle proteins representing IVS2 (T4CaIVS2) or IVS3 (T4CaIVS3) were synthesized. Both proteins form cation-selective channels, but with distinct characteristics: the single-channel conductance in 50 mM BaCl2 is 3 pS and 10 pS. For T4CaIVS3, the conductance saturates with increasing concentration of divalent cation. The dissociation constants for Ba2+, Ca2+, and Sr2+ are 13.6 mM, 17.7 mM, and 15.0 mM, respectively. The conductance of T4CaIVS2 does not saturate up to 150 mM salt. Whereas T4CaIVS3 is blocked by microM Ca2+ and Cd2+, T4CaIVS2 is not blocked by divalent cations. Only T4CaIVS3 is modulated by enantiomers of the DHP derivative BayK 8644, demonstrating sequence requirement for specific drug action. Thus, only T4CaIVS3 exhibits pore properties characteristic also of authentic calcium channels. The designed functional calcium channel may provide insights into fundamental mechanisms of ionic permeation and drug action, information that may in turn further our understanding of molecular determinants underlying authentic pore structures.     

Evidence for a small anion-selective channel in the cell wall of Mycobacterium bovis BCG besides a wide cation-selective pore.

Two channels were observed in extracts of whole Mycobacterium bovis BCG cells using organic solvents and detergents. The channels derived from organic solvent treatment had a single-channel conductance of about 4.0 nS in 1 M KCl in lipid bilayer membranes with properties similar to those of the channels discovered previously in Mycobacterium smegmatis and Mycobacterium chelonae. The channel was in its open configuration only at low transmembrane potentials. At higher voltages it switched to closed states that were almost impermeable for ions. Lipid bilayer experiments in the presence of detergent extracts of whole cells revealed another channel with a single-channel conductance of only 780 pS in 1 M KCl. Our results indicate that the mycolic acid layer of M. bovis BCG contains two channels, one is cation-selective and its permeability properties can be finely controlled by cell wall asymmetry or potentials. The other one is anion-selective, has a rather small single-channel conductance and is voltage-insensitive. The concentration of channel-forming proteins in the cell wall seems to be small, which is in agreement with the low cell wall permeability for hydrophilic solutes.     

Proline-induced hinges in transmembrane helices: possible roles in ion channel gating

A number of ion channels contain transmembrane (TM) alpha-helices that contain proline-induced molecular hinges. These TM helices include the channel-forming peptide alamethicin (Alm), the S6 helix from voltage-gated potassium (Kv) channels, and the D5 helix from voltage-gated chloride (CLC) channels. For both Alm and KvS6, experimental data implicate hinge-bending motions of the helix in an aspect of channel gating. We have compared the hinge-bending motions of these TM helices in bilayer-like environments by multi-nanosecond MD simulations in an attempt to describe motions of these helices that may underlie possible modes of channel gating. Alm is an alpha-helical channel-forming peptide, which contains a central kink associated with a Gly-x-x-Pro motif in its sequence. Simulations of Alm in a TM orientation for 10 ns in an octane slab indicate that the Gly-x-x-Pro motif acts as a molecular hinge. The S6 helix from Shaker Kv channels contains a Pro-Val-Pro motif. Modeling studies and recent experimental data suggest that the KvS6 helix may be kinked in the vicinity of this motif. Simulations (10 ns) of an isolated KvS6 helix in an octane slab and in a POPC bilayer reveal hinge-bending motions. A pattern-matching approach was used to search for possible hinge-bending motifs in the TM helices of other ion channel proteins. This uncovered a conserved Gly-x-Pro motif in TM helix D5 of CLC channels. MD simulations of a model of hCLC1-D5 spanning an octane slab suggest that this channel also contains a TM helix that undergoes hinge-bending motion. In conclusion, our simulations suggest a model in which hinge-bending motions of TM helices may play a functional role in the gating mechanisms of several different families of ion channels.     

The cell wall of the pathogenic bacterium Rhodococcus equi contains two channel-forming proteins with different properties

We have identified in organic solvent extracts of whole cells of the gram-positive pathogen Rhodococcus equi two channel-forming proteins with different and complementary properties. The isolated proteins were able to increase the specific conductance of artificial lipid bilayer membranes made from phosphatidylcholine-phosphatidylserine mixtures by the formation of channels able to be permeated by ions. The channel-forming protein PorA(Req) (R. equi pore A) is characterized by the formation of cation-selective channels, which are voltage gated. PorA(Req) has a single-channel conductance of 4 nS in 1 M KCl and shows high permeability for positively charged solutes because of the presence of negative point charges. According to the results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), the protein has an apparent molecular mass of about 67 kDa. The analysis (using the effect of negative charges on channel conductance) of the concentration dependence of the single-channel conductance suggested that the diameter of the cell wall channel is about 2.0 nm. The second channel (formed by PorB(Req) [R. equi pore B]) shows a preferred movement of anions through the channel and is not voltage gated. This channel shows a single-channel conductance of 300 pS in 1 M KCl and is characterized by the presence of positive point charges in or near the channel mouth. Based on SDS-PAGE, the apparent molecular mass of the channel-forming protein is about 11 kDa. Channel-forming properties of the investigated cell wall porins were compared with those of others isolated from mycolic acid-containing actinomycetes. We present here the first report of a fully characterized anion-selective cell wall channel from a member of the order Actinomycetales.     

Characterization of the channel properties of tetanus toxin in planar lipid bilayers.

A detailed characterization of the properties of the channel formed by tetanus toxin in planar lipid bilayers is presented. Channel formation proceeds at neutral pH. However, an acidic pH is required to detect the presence of channels in the membrane rapidly and effectively. Acid pH markedly lowers the single-channel conductance, for phosphatidylserine at 0.5 M KCl gamma = 89 pS at pH 7.0 while at pH 4.8, gamma = 30 pS. The toxin channel is cation selective without significant selectivity between potassium and sodium (gamma [K+]/gamma [Na+] greater than or equal to 1.35). In all the lipids studied gamma is larger at positive than at negative voltages. The toxin channel is voltage dependent both at neutral and acidic pH: for phosphatidylserine membranes, the probability of the channel being open is much greater at positive than at negative voltage. In different phospholipids the channel exhibits different voltage dependence. In phosphatidylserine membranes the channel is inactivated at negative voltages, whereas in diphytanoylphosphatidylcholine membranes channels are more active at negative voltages than at positive. The presence of acidic phospholipids in the bilayers increases both the single-channel conductance as well as the probability of the channel being open at positive voltage. A subconductance state is readily identifiable in the single-channel recordings. Accordingly, single-channel conductance histograms are best fitted with a sum of 3 Gaussian distributions corresponding to the closed state, the open subconductance state and the full open state. Channel activity occurs in bursts of openings separated by long closings. Probability density analysis of the open dwell times of the toxin channel indicate the existence of a single open state with a lifetime greater than or equal to 1 ms in all lipids studied. Analysis of intra-bursts closing lifetimes reveals the existence of two components; the slow component is of the order of 1 ms, the fast one is less than or equal to 0.5 ms. The channel activity induced by tetanus toxin in lipid bilayers suggests a mechanism for its neurotoxicity: a voltage dependent, cation selective channel inserted in the postsynaptic membrane would lead to continuous depolarization and, therefore, persistent activation of the postsynaptic cell.     

Formation of ion channels in planar lipid bilayer membranes by synthetic basic peptides.

We made use of a planar lipid bilayer system to examine the action of synthetic basic peptides which model the prepiece moiety of mitochondrial protein precursors and have antibacterial activity against Gram-positive bacteria. The sequences of the peptides used were as follows: Ac-(Ala-Arg-Leu)3-NHCH3 (3(3], Ac-(Leu-Ala-Arg-Leu)2-NHCH3 (4(2], Ac-(Leu-Ala-Arg-Leu)3-NHCH3 (4(3], Ac-(Leu-Leu-Ala-Arg-Leu)2-NHCH3 (5(2]. These peptides interacted differently with planar lipid bilayer membranes and membrane conductance increased by the formation of ion channels. The effects of the peptides on the macroscopic current-increase and on the probability of channel formation, at the single channel level were in the order of 4(3) greater than 4(2) approximately 5(2) much greater than 3(3), a finding which correlates with the antibacterial activity of these peptides. The micromolar (microM) order concentration at which the channel was formed resembles that causing antibacterial activity. Thus, the peptide antibacterial activity may occur through an increase in ion permeability of the bacterial membrane. The single-channel properties were investigated in detail using 4(3), the peptide with the highest ion channel-forming activity. Many types of channels were observed with respect to conductance (2-750 pS) and voltage dependency of gating. However, the channels were all cation-selective. These results suggest that the ion channels formed by peptide 4(3) may be able to take on a variety of conformations and/or assembly.     

MOMP (major outer membrane protein) of Campylobacter jejuni; a versatile pore-forming protein

The great majority of trimeric porins of Gram-negative bacteria cannot be dissociated into monomers without disrupting their folded conformation. The porin of Campylobacter jejuni, however, displays two folded structures, a classical oligomer and a monomer resistant to detergent denaturation. We probed the transition of trimer to monomer using light scattering experiments and examined the secondary structures of these two molecular states by infra-red spectroscopy. The channel-forming properties of both trimer and monomer were studied after incorporation into artificial lipid bilayers. In these conditions, the trimer induced ion channels with a conductance value of 1200 pS in 1 M NaCl. The pores showed marked cationic selectivity and sensitivity to low voltage. Analysis of the isolated monomer showed nearly the same single-channel conductance and the same selectivity and sensitivity to voltage. These results indicate that the folded monomer form of C. jejuni MOMP displays essentially the same pore-forming properties as the native trimer.     

Membrane-permeabilizing activities of Bacillus thuringiensis coleopteran-active toxin CryIIIB2 and CryIIIB2 domain I peptide.

Bacillus thuringiensis toxin CryIIIB2 exhibits activity against two agriculturally important pests, the Colorado potato beetle, Leptinotarsa decemlineata, and the Southern corn rootworm, Diabrotica undecimpunctata. CryIIIB2 shows significant structural similarity to Colorado potato beetle-active toxin CryIIIA, whose crystal structure has been determined elsewhere [J. Li, J. Carrol, and D. J. Ellar, Nature (London) 353:815-821, 1991]. A clone limited to the putative 7-alpha-helical bundle domain I peptide of CryIIIB2 was constructed by PCR. The truncated protein was expressed at high levels in Escherichia coli. Domain I peptide was isolated and compared with native CryIIIB2 toxin in promoting ion efflux from synthetic phospholipid vesicles and formation of ion channels in black lipid membranes. The results showed that CryIIIB2 domain I peptide is sufficient for ion channel formation and promotes ion efflux. Both native CryIIIB2 toxin and domain I peptide were inefficient channel-forming proteins that produced noisy ion channels of various conductance states. In ion efflux assays, native toxin promoted greater ion efflux from synthetic vesicles than did the truncated peptide.     

Two types of ion channel formation of tolaasin,a Pseudomonas peptide toxin

Tolaasin is a peptide toxin produced by Pseudomonas tolaasii and causes brown blotch disease of the cultivated mushrooms. Two types of ion channels were identified by the incorporation of tolaasin into lipid bilayer. The slope conductance of type 1 channel measured in the buffer containing 100 mM KCl was 150 pS with a linear current vs. voltage relationship. The type 2 tolaasin channel had two subconductance states of 300 and 500 pS. Both channels were inhibited by Zn(2+). Ion channel formations of tolaasin were concentration-dependent and single channel currents were successfully obtained at 0.6 unit tolaasin, 15.9 nM. The type 1 channel was obtained more frequently than the type 2 channel and the ratio of their appearance was approximately 4:1, respectively.     

Activity of toxins produced by Pseudomonas syringae pv. syringae in model and cell membranes

We studied effects of toxins produced by a bacterium Pseudomonas syringae pv. syringae on the conductance of bilayer lipid membranes (BLM). The used toxins were as follows: syringopeptin 22A (SP22A), syringomycin E (SPE), syringostatin A (SSA), syringotoxin B (STB), and methylated syringomycin E (CH3-SRE). All toxins demonstrated channel-forming activity. The threshold sequence for toxin activity was SP22A > SRE approximately equal to SSA > STB > CH3-SRE, and this sequence was independent of lipid membrane composition, and NaCl concentration (pH 6) in the membrane bathing solution (in the range of 0.1-1.0 M). This sequence correlated with relative bioactivities of toxins. In addition, SRE demonstrated a more potent antifungal activity than CH3-SRE. These findings suggest that ion channel formation may underlie the bioactivities of the above toxins. The properties of single ion channels formed by the toxins in BLMs were found to be similar, which points to the similarity in the channel structures. In negatively charged membranes, bathed with diluted electrolyte solutions (0.1 M NaCl), the channels were seen to open with positive transmembrane potentials (V) (from the side of toxin addition), and close with negative potentials. In uncharged membranes the opposite response to a voltage sign was observed. Increasing the NaCl concentration up to 1 M unified the voltage sensitivity of channels in charged and uncharged membranes: channels opened with negative V, and closed with positive V. With all systems, the voltage current curves of single channels were similarly superlinear in the applied voltage and asymmetric in its sign. It was found that the single channel conductance of STB and SSA was higher than that of other toxin channels. All the toxins formed at least two types of ion channels that were multiple by a factor of either 6 or 4 in their conductance. The results are discussed in terms of the structural features of toxin molecules.     

Ion channels formed in planar lipid bilayers by the dipteran-specific Cry4B Bacillus thuringiensis toxin and its alpha1-alpha5 fragment

Trypsin activation of Cry4B, a 130-kDa Bacillus thuringiensis (Bt) protein, produces a 65-kDa toxin active against mosquito larvae. The active toxin is made of two protease resistant-products of ca. 45 kDa and ca. 20 kDa. The cloned 21-kDa fragment consisting of the N-terminal region of the toxin was previously shown to be capable of permeabilizing liposomes. The present study was designed to test the following hypotheses: (1) Cry4B, like several other Bt toxins, is a channel-forming toxin in plannar lipid bilayers; and (2) the 21-kDa N-terminal region, which maps for the first five helices (alpha1-alpha5) of domain 1 in other Cry toxins, and which putatively shares a similar tri-dimensional structure, is sufficient to account for the ion channel activity of the whole toxin. Using circular dichroism spectroscopy and planar lipid bilayers, we showed that the 21-kDa polypeptide existed as an alpha-helical structure and that both Cry4B and its alpha1-alpha5 fragment formed ion channels of 248 +/- 44 pS and 207 +/- 23 pS, respectively. The channels were cation-selective with a potassium-to-chloride permeability ratio of 6.7 for Cry4B and 4.5 for its fragment. However, contrary to the full-length toxin, the alpha1-alpha5 region formed channels at low dose; they tended to remain locked in their open state and displayed flickering activity bouts. Thus, like the full-length toxin, the alpha1-alpha5 region is a functional channel former. A pH-dependent, yet undefined region of the toxin may be involved in regulating the channel properties.     

Synthesis and channel properties of [Tau 16]gramicidin A

Des(ethanolamine)-taurine16-gramicidin A ([Tau 16]gramicidin A) was synthesized by the solid phase method and its channel-forming behavior in planar lipid bilayers was examined. The purified monovalent anionic peptide formed channels when applied to the aqueous compartments on both sides of the bilayer, but not when applied to one side only. The single-channel conductance was measured for KCl concentrations between 0.1 and 1.0 M and was found to be higher than that of gramicidin A in each case. Single-channel lifetimes were similar to those of gramicidin A suggesting that the channels have the beta 6.3 helix structure.     

Proteolysis of synthetic peptides by type A botulinum neurotoxin

Type A botulinum neurotoxin catalyzed the hydrolysis of synthetic peptides based on the sequence of the 25-kD synaptosomal protein SNAP-25. In each peptide, the toxin cleaved at a single glutaminyl-arginine bond corresponding to residues 197 and 198 of SNAP-25, confirming earlier reports on the enzymatic specificity of the toxin in synaptosomal preparations. Metal chelators inhibited catalysis, consistent with a metalloprotease activity. In contrast to tetanus toxin and other botulinum toxin serotypes, type A toxin hydrolyzed relatively short, 17-to 20-residue peptides. In the substrates, SNAP-25 residue 202 and one or more of residues 187–191 were required for efficient hydrolysis, but residues 167–186 and 203–206 were not. The highest rates of hydrolysis were found when the C-terminal residues of the peptides were amidated.     

Modification of positional distribution of fatty acids in phosphatidylinositol of rabbit neutrophils stimulated with formylmethionyl-leucyl-phenylalanine

Protein P, an anion-specific channel-forming protein from the outer membrane of Pseudomonas aeruginosa was chemically modified by acetylation and syccinylation of its accessible amino groups. The chemically modified protein retained its ability to form oligomers on sodium dodecyl sulfate polyacrylamide gels, whereas only the acetylated protein formed channels in reconstitution experiments with lipid bilayers. Acetylated protein P demonstrated a substantially reduced mean single channel conductance (25 pS at 1 M KCl) compared to the native protein P channels (250 pS at 1 M KCl) when reconstituted into black lipid bilayer membranes. The homogeneous size distribution of single-channel conductances suggested that all of the protein P molecules had been acetylated. Zero-current potential measurements demonstrated that the acetylated protein P channel was only weakly selective for anions and allowed the permeation of cations, in contrast to the native protein P channels, which were more than 100-fold selective for anions over cations. The dependence of conductance on salt concentration was changed upon acetylation, in that acetylated protein P demonstrated a linear concentration-conductance relationship, whereas native protein P channels became saturated at high salt concentrations. These data strongly suggested that the basis of anion selectivity for native protein P channels is fixed amino groups. In agreement with this, we could demonstrate a 2.5-fold decrease in single-channel conductance between pH 7 and pH 9, between which pH values the epsilon-amino groups of amino acids would start to become deprotonated. Two alternative schemes for the topography of the protein P channel and localization of the fixed amino groups are presented and discussed.     

Modification of the conductance,selectivity and concentration-dependent saturation of Pseudomonas aeruginosa protein P channels by chemical acetylation

Protein P, an anion-specific channel-forming protein from the outer membrane of Pseudomonas aeruginosa was chemically modified by acetylation and syccinylation of its accessible amino groups. The chemically modified protein retained its ability to form oligomers on sodium dodecyl sulfate polyacrylamide gels, whereas only the acetylated protein formed channels in reconstitution experiments with lipid bilayers. Acetylated protein P demonstrated a substantially reduced mean single channel conductance (25 pS at 1 M KCl) compared to the native protein P channels (250 pS at 1 M KCl) when reconstituted into black lipid bilayer membranes. The homogeneous size distribution of single-channel conductances suggested that all of the protein P molecules had been acetylated. Zero-current potential measurements demonstrated that the acetylated protein P channel was only weakly selective for anions and allowed the permeation of cations, in contrast to the native protein P channels, which were more than 100-fold selective for anions over cations. The dependence of conductance on salt concentration was changed upon acetylation, in that acetylated protein P demonstrated a linear concentration-conductance relationship, whereas native protein P channels became saturated at high salt concentrations. These data strongly suggested that the basis of anion selectivity for native protein P channels is fixed amino groups. In agreement with this, we could demonstrate a 2.5-fold decrease in single-channel conductance between pH 7 and pH 9, between which pH values the ?-amino groups of amino acids would start to become deprotonated. Two alternative schemes for the topography of the protein P channel and localization of the fixed amino groups are presented and discussed.