Computer-averaged views of the 70 S monosome from Escherichia coli

The prokaryotic (70 S) monosome, composed of a roughly hemispherical 50 S large subunit and an elongate 30 S small subunit, appears in the electron micrograph in only a few common views representing the small number of preferred orientations assumed by the particle. Two of these, termed O and L views, have previously been characterized as the overlap and non-overlap projections; a third view, which we term the R view, represents the other endpoint of a rotational continuum with the overlap or O view. Tilt studies enabled us to calibrate this range as spanning approximately 50 degrees. The disjunct set of L views was averaged, and the reproducible resolution was determined to be 1/3.5 nm-1. The combined sets of O and R views were analyzed by correspondence analysis, and a continuous "rotation series" of subaverages was obtained. Interpretation of the views in the light of what is known about the morphologies of the individual subunits allows a general picture of the mutual fit of the subunits in the monosome to be conceived.     

Characteristic views of E. coli and B. stearothermophilus 30S ribosomal subunits in the electron microscope

Large sets of electron microscopic images of the 30S ribosomal subunits of Bacillus stearothermophilus (914 molecules) and Escherichia coli (422 molecules) were analysed with image processing techniques. Using computer alignment and a new multivariate statistical classification scheme, three predominant views of the subunit were found for both species. These views, which together account for approximately 90% of the population of images, were determined to a reproducible resolution of up to 1.7 nm, thus elucidating many new structural details. The angular spread of the molecular orientations around the three main stable positions is remarkably small (less than 8 degrees). Some of the current models for the small ribosomal subunit are incompatible with our new results.     

Single particle reconstructions of the transferrin-transferrin receptor complex obtained with different specimen preparation techniques

The outcome of three-dimensional (3D) reconstructions in single particle electron microscopy (EM) depends on a number of parameters. We have used the well-characterized structure of the transferrin (Tf)-transferrin receptor (TfR) complex to study how specimen preparation techniques influence the outcome of single particle EM reconstructions. The Tf-TfR complex is small (290kDa) and of low symmetry (2-fold). Angular reconstitution from images of vitrified specimens does not reliably converge on the correct structure. Random conical tilt reconstructions from negatively stained specimens are reliable, but show variable degrees of artifacts depending on the negative staining protocol. Alignment of class averages from vitrified specimens to a 3D negative stain reference model using FREALIGN largely eliminated artifacts in the resulting 3D maps, but not completely. Our results stress the need for critical evaluation of structures determined by single particle EM.     

Structure and structural variations of the Escherichia coli 30 S ribosomal subunit as revealed by three-dimensional cryo-electron microscopy

A three-dimensional reconstruction of the 30 S subunit of the Escherichia coli ribosome was obtained at 23 A resolution. Because of the improved resolution, many more structural details are seen as compared to those obtained in earlier studies. Thus, the new structure is more suitable for comparison with the 30 S subunit part of the 70 S ribosome, whose structure is already known at a better resolution. In addition, we observe relative and, to some extent, independent movements of three main structural domains of the 30 S subunit, namely head, platform and the main body, which lead to partial blurring of the reconstructed volume. An attempt to subdivide the data set into conformationally defined subsets reveals the existence of conformers in which these domains have different orientations with respect to one another. This result suggests the existence of dynamic properties of the 30 S subunit that might be required for facilitating its interactions with mRNA, tRNA and other ligands during protein biosynthesis.     

Structure of functional a salina – E Coli hybrid ribosome by electron microscopy

Small 40S Artemia salina and large 50S Escherichia coli ribosomal subunits can be assembled into 73S hybrid monosomes active in model assays for protein synthesis. The reciprocal combination–small 30S E coli and large 60S A salina–fails to form hybrids. The 73S hybrid particles strongly resemble homologous 70S E coli and 80S A salina monosomes. The morphologic differences between the corresponding eukaryotic and prokaryotic ribosomal particles, established by electron microscopy, do not significantly affect the assembly and mutual orientation of 40S A salina and 50S E coli subunits in the heterologous monosome. The fact that the structure of the interface, the supposed site of protein synthesis, is preserved in the active hybrid implies that retention or loss of biologic activity of hybrid ribosomes is determined by the extent of conformational changes in the interface.     

Nucleotide sequence of the Escherichia coli gene for lipid A disaccharide synthase.

The lpxB gene of Escherichia coli, believed to be the structural gene for lipid A disaccharide synthase, is located in the min 4 region of the chromosome. It is adjacent to and clockwise of the lpxA gene, which is thought to encode UDP-N-acetylglucosamine acyltransferase. Preliminary evidence suggests that lpxA and lpxB are cotranscribed in the clockwise direction and thus constitute part of a previously unknown operon (D. N. Crowell, M. S. Anderson, and C. R. H. Raetz, J. Bacteriol. 168:152-159, 1986). We now report the complete nucleotide sequence of a 1,522-base-pair PvuII-HincII fragment known to carry the lpxB gene. This sequence contained an open reading frame of 1,149 base pairs, in agreement with the predicted size, location, and orientation of lpxB. There was a second open reading frame 5' to, and in the same orientation as, lpxB that corresponded to lpxA. The ochre codon terminating lpxA was shown to overlap the methionine codon identified as the initiation codon for lpxB, suggesting that these genes are cotranscribed and translationally coupled. A third open reading frame was also shown to begin at the 3' end of lpxB with analogous overlap between the opal codon terminating lpxB and the methionine codon that putatively initiates translation downstream of lpxB in the clockwise direction. These results argue that at least three genes constitute a translationally coupled operon in the min 4 region of the E. coli chromosome. The accompanying paper by Tomasiewicz and McHenry (J. Bacteriol. 169:5735-5744, 1987) presents 4.35 kilobases of DNA sequence, beginning at the 3' end of lpxB, and argues that dnaE and several other open reading frames may be members of this operon.     

Correlation analysis of gap junction lattice images.

Fourier averages of connexon images computed from low-irradiation electron micrographs of isolated negatively stained gap junction domains exhibited differences in stain distribution and connexon orientation. To analyze these polymorphic structures, correlation averaging methods were applied to images from negatively stained and frozen-hydrated specimens. For the negatively stained specimens, separate averages over two subsets of connexons with differing degrees of stain accumulation in the axial channel were obtained. Two populations of connexons with opposite skew orientations were distinguishable within a single junctional domain of a frozen-hydrated specimen. Correlation maps calculated using the left- and right-skewed references showed that the selected connexons tend to locally cluster. Using correlation methods to analyze packing disorder in a typical connexon lattice, we estimated the root-mean-square variation in the nearest neighbor pair separation to be approximately 11% of the lattice constant. Displacements of the connexons relative to each other increased with increasing pair separation in the lattice, rather like a liquid, although long-range orientation order was conserved as in a crystal. These results support the hypothesis that the hexagonal ordering of the connexons results from short-range repulsive forces.     

Native 3D structure of eukaryotic 80s ribosome: morphological homology with E. coli 70S ribosome

A three-dimensional reconstruction of the eukaryotic 80S monosome from a frozen-hydrated electron microscopic preparation reveals the native structure of this macromolecular complex. The new structure, at 38A resolution, shows a marked resemblance to the structure determined for the E. coli 70S ribosome (Frank, J., A. Verschoor, Y. Li, J. Zhu, R.K. Lata, M. Radermacher, P. Penczek, R. Grassucci, R.K. Agrawal, and Srivastava. 1996b. In press; Frank, J., J. Zhu, P. Penczek, Y. Li, S. Srivastava ., A. Verschoor, M. Radermacher, R. Grassucci, R.K. Lata, and R. Agrawal. 1995. Nature (Lond.).376:441-444.) limited to a comparable resolution, but with a number of eukaryotic elaborations superimposed. Although considerably greater size and intricacy of the features is seen in the morphology of the large subunit (60S vs 50S), the most striking differences are in the small subunit morphology (40S vs 30S): the extended beak and crest features of the head, the back lobes, and the feet. However, the structure underlying these extra features appears to be remarkably similar in form to the 30S portion of the 70S structure. The intersubunit space also appears to be strongly conserved, as might be expected from the degree of functional conservation of the ribosome among kingdoms (Eukarya, Eubacteria, and Archaea). The internal organization of the 80S structure appears as an armature or core of high-density material for each subunit, with the two cores linked by a single bridge between the platform region of the 40S subunit and the region below the presumed peptidyltransferase center of the 60S subunit. This may be equated with a close contact of the 18S and 28S rRNAs in the translational domain centered on the upper subunit:subunit interface.     

Nucleotide sequence analysis of the inversion termini located within IS3 elements alpha 3 beta 3 and beta 5 alpha 5 of Escherichia coli K-12.

This paper presents the first detailed structural analysis of termini of an inversion mediated by recombination between Escherichia coli native IS elements. The complete nucleotide sequence of the inversion termini in the lactose region of Escherichia coli K-12 confirms our previous suggestion that the inversion occurred by homologous recombination between alpha 3 beta 3 and beta 5 alpha 5 IS3 elements (D. J. Savic, J. Bacteriol. 140:311-319, 1979; D. J. Savic, S. Romac, and S. D. Ehrlich, J. Bacteriol. 155:943-946, 1983). The data show a slight structural divergence of alpha 3 beta 3 and beta 5 alpha 5 elements, but they do not reveal new sequences within recombined IS3 elements that could influence the expression of nearby genes.     

Diagnostic value of micro-CT in comparison with histology in the qualitative assessment of historical human postcranial bone pathologies.

Micro-computed tomography (muCT) is of great interest for palaeopathological examination because it is less invasive than histology. This study evaluates the diagnostic value of muCT for postcranial macerated bones. We investigated five specimens (osteomyelitis, tuberculosis, trauma, osteosarcoma and hypertrophic osteoarthropathy) of a pathology reference series by muCT and polarised light microscopy. The 3D muCT images allow an easy orientation within the specimen. Surface structures, thickness, continuity of the cortex and number, thickness and orientation of the trabeculae can be evaluated. The high number of muCT slices helps to choose the most interesting areas for further investigations. Grey value images display the degree of mineralisation. Yet, the differentiation between woven and lamellar bone is only possible using polarised light microscopy. muCT is a tool of high value for the examination of postcranial bone disorders. It cannot replace histological examinations completely because it cannot assess the bone quality (woven or lamellar). For the choice of the optimal location where slices for the microscopic investigation are later cut in heterogeneous samples, muCT is very useful. Therefore, we suggest performing the muCT examination first, followed by histology if necessary.     

Neuroanatomical phenotyping of the mouse brain with three-dimensional autofluorescence imaging

The structural organization of the brain is important for normal brain function and is critical to understand in order to evaluate changes that occur during disease processes. Three-dimensional (3D) imaging of the mouse brain is necessary to appreciate the spatial context of structures within the brain. In addition, the small scale of many brain structures necessitates resolution at the ～10 μm scale. 3D optical imaging techniques, such as optical projection tomography (OPT), have the ability to image intact large specimens (1 cm(3)) with ～5 μm resolution. In this work we assessed the potential of autofluorescence optical imaging methods, and specifically OPT, for phenotyping the mouse brain. We found that both specimen size and fixation methods affected the quality of the OPT image. Based on these findings we developed a specimen preparation method to improve the images. Using this method we assessed the potential of optical imaging for phenotyping. Phenotypic differences between wild-type male and female mice were quantified using computer-automated methods. We found that optical imaging of the endogenous autofluorescence in the mouse brain allows for 3D characterization of neuroanatomy and detailed analysis of brain phenotypes. This will be a powerful tool for understanding mouse models of disease and development and is a technology that fits easily within the workflow of biology and neuroscience labs.     

Combined method of whole mount and block-face imaging: Acquisition of 3D data of gene expression pattern from conventional in situ hybridization

Visualization of spatiotemporal expression of a gene of interest is a fundamental technique for analyzing the involvements of genes in organ development. In situ hybridization (ISH) is one of the most popular methods for visualizing gene expression. When conventional ISH is performed on sections or whole-mount specimens, the gene expression pattern is represented in 2-dimensional (2D) microscopic images or in the surface view of the specimen. To obtain 3-dimensional (3D) data of gene expression from conventional ISH, the “serial section method” has traditionally been employed. However, this method requires an extensive amount of time and labor because it requires researchers to collect a tremendous number of sections, label all sections by ISH, and image them before 3D reconstruction. Here, we proposed a rapid and low-cost 3D imaging method that can create 3D gene expression patterns from conventional ISH-labeled specimens. Our method consists of a combination of whole-mount ISH and Correlative Microscopy and Blockface imaging (CoMBI). The whole-mount ISH-labeled specimens were sliced using a microtome or cryostat, and all block-faces were imaged and used to reconstruct 3D images by CoMBI. The 3D data acquired using our method showed sufficient quality to analyze the morphology and gene expression patterns in the developing mouse heart. In addition, 2D microscopic images of the sections can be obtained when needed. Correlating 2D microscopic images and 3D data can help annotate gene expression patterns and understand the anatomy of developing organs. These results indicated that our method can be useful in the field of developmental biology.     

Physiochemical properties of rat liver mitochondrial ribosomes

In the present study, the physiochemical properties of rat liver mitochondrial ribosomes were examined and compared with Escherichia coli ribosomes. The sedimentation and translational diffusion coefficients as well as the molecular weight and buoyant density of rat mitochondrial ribosomes were determined. Sedimentation coefficients were established using the time-derivative algorithm (Philo, J. S. (2000) Anal. Biochem. 279, 151-163). The sedimentation coefficients of the intact monosome, large subunit, and small subunit were 55, 39, and 28 S, respectively. Mitochondrial ribosomes had a particle composition of 75% protein and 25% RNA. The partial specific volume was 0.688 ml/g, as determined from the protein and RNA composition. The buoyant density of formaldehyde-fixed ribosomes in cesium chloride was 1.41 g/cm(3). The molecular masses of mitochondrial and E. coli ribosomes determined by static light-scattering experiments were 3.57 +/- 0.14 MDa and 2.49 +/- 0.06 MDa, respectively. The diffusion coefficient obtained from dynamic light-scattering measurements was 1.10 +/- 0.01 x 10(-7) cm(2) s(-1) for mitochondrial ribosomes and 1.72 +/- 0.03 x 10(-7) cm(2) s(-1) for the 70 S E. coli monosome. The hydration factor determined from these hydrodynamic parameters were 4.6 g of water/g of ribosome and 1.3 g/g for mitochondrial and E. coli ribosomes, respectively. A calculated hydration factor of 3.3 g/g for mitochondrial ribosomes was also obtained utilizing a calculated molecular mass and the Svedberg equation. These measurements of solvation suggest that ribosomes are highly hydrated structures. They are also in agreement with current models depicting ribosomes as porous structures containing numerous gaps and tunnels.     

Low-resolution density maps from atomic models: how stepping "back" can be a step "forward"

Atomic-resolution structures have had a tremendous impact on modern biological science. Much useful information also has been gleaned by merging and correlating atomic-resolution structural details with lower-resolution (15-40 A), three-dimensional (3D) reconstructions computed from images recorded with cryo-transmission electron microscopy (cryoTEM) procedures. One way to merge these structures involves reducing the resolution of an atomic model to a level comparable to a cryoTEM reconstruction. A low-resolution density map can be derived from an atomic-resolution structure by retrieving a set of atomic coordinates editing the coordinate file, computing structure factors from the model coordinates, and computing the inverse Fourier transform of the structure factors. This method is a useful tool for structural studies primarily in combination with 3D cryoTEM reconstructions. It has been used to assess the quality of 3D reconstructions, to determine corrections for the phase-contrast transfer function of the transmission electron microscope, to calibrate the dimensions and handedness of 3D reconstructions, to produce difference maps, to model features in macromolecules or macromolecular complexes, and to generate models to initiate model-based determination of particle orientation and origin parameters for 3D reconstruction.     

Cloning and characterization of the gene encoding inorganic pyrophosphatase of Escherichia coli K-12.

Escherichia coli K-12 gene ppa encoding inorganic pyrophosphatase (PPase) was cloned and sequenced. The 5' end of the ppa mRNA was identified by primer extension mapping. A typical E. coli sigma 70 promoter was identified immediately upstream of the mRNA 5' end. The structural gene of ppa contains 528 base pairs, from which a 175-amino-acid translation product, Mr 19,572, was deduced. The deduced amino acid composition perfectly fitted with that of PPase as previously determined (P. Burton, D. C. Hall, and J. Josse, J. Biol. Chem. 245:4346-4351, 1970). Furthermore, the partial amino acid sequence (residues 1 to 108) of E. coli PPase determined by S. A. Cohen (Ph.D. thesis, University of Chicago, 1978) was the same as that deduced from the nucleotide sequence. This is the first report of the cloning of a PPase gene.     

The Good,the Bad,and the Ugly: The Influence of Skull Reconstructions and Intraspecific Variability in Studies of Cranial Morphometrics in Theropods and Basal Saurischians

Several studies investigating macroevolutionary skull shape variation in fossil reptiles were published recently, often using skull reconstructions taken from the scientific literature. However, this approach could be potentially problematic, because skull reconstructions might differ notably due to incompleteness and/or deformation of the material. Furthermore, the influence of intraspecific variation has usually not been explored in these studies. Both points could influence the results of morphometric analyses by affecting the relative position of species to each other within the morphospace. The aim of the current study is to investigate the variation in morphometric data between skull reconstructions based on the same specimen, and to compare the results to shape variation occurring in skull reconstructions based on different specimens of the same species (intraspecific variation) and skulls of closely related species (intraspecific variation). Based on the current results, shape variation of different skull reconstructions based on the same specimen seems to have generally little influence on the results of a geometric morphometric analysis, although it cannot be excluded that some erroneous reconstructions of poorly preserved specimens might cause problems occasionally. In contrast, for different specimens of the same species the variation is generally higher than between different reconstructions based on the same specimen. For closely related species, at least with similar ecological preferences in respect to the dietary spectrum, the degree of interspecific variation can overlap with that of intraspecific variation, most probably due to similar biomechanical constraints.     

Isolation and physiochemical properties of protein-rich nematode mitochondrial ribosomes

In the present study, mitochondrial ribosomes of the nematode Ascaris suum were isolated and their physiochemical properties were compared to ribosomes of Escherichia coli. The sedimentation coefficient and buoyant density of A. suum mitochondrial ribosomes were determined. The sedimentation coefficient of the intact monosome was about 55 S. The buoyant density of formaldehyde-fixed ribosomes in cesium chloride was 1.40 g/cm(3), which suggests that the nematode mitoribosomes have a much higher protein composition than other mitoribosomes. The diffusion coefficients obtained from dynamic light scattering measurements were (1.48 +/- 0.04) x 10(-)(7) cm(2) s(-)(1) for 55 S mitoribosomes and (1.74 +/- 0.04) x 10(-)(7) cm(2) s(-)(1) for the 70 S E. coli monosome. The diameter of mitoribosomes was measured by dynamic light-scattering analysis and electron microscopy. Though the nematode mitoribosome has a larger size than the bacterial ribosome, it does not differ significantly in size from mammalian mitoribosomes.     

Low-Resolution Density Maps from Atomic Models: How Stepping “Back” Can Be a Step “Forward”

Atomic-resolution structures have had a tremendous impact on modern biological science. Much useful information also has been gleaned by merging and correlating atomic-resolution structural details with lower-resolution (15–40 Å), three-dimensional (3D) reconstructions computed from images recorded with cryo-transmission electron microscopy (cryoTEM) procedures. One way to merge these structures involves reducing the resolution of an atomic model to a level comparable to a cryoTEM reconstruction. A low-resolution density map can be derived from an atomic-resolution structure by retrieving a set of atomic coordinates editing the coordinate file, computing structure factors from the model coordinates, and computing the inverse Fourier transform of the structure factors. This method is a useful tool for structural studies primarily in combination with 3D cryoTEM reconstructions. It has been used to assess the quality of 3D reconstructions, to determine corrections for the phase-contrast transfer function of the transmission electron microscope, to calibrate the dimensions and handedness of 3D reconstructions, to produce difference maps, to model features in macromolecules or macromolecular complexes, and to generate models to initiate model-based determination of particle orientation and origin parameters for 3D reconstruction.     

Two- and three-dimensional proton NMR studies of apo-neocarzinostatin.

Neocarzinostatin (NCS) is an antitumor protein from Streptomyces carzinostaticus that is identical in apo-protein sequence with mitomalcin (MMC) from Streptomyces malayensis. We describe the use of apo-NCS as a model system for applying combined two- and three-dimensional (2D and 3D) proton NMR spectroscopy to the structure determination of proteins (Mr greater than 10K) without isotope labeling. Strategies aimed at accurately assigning overlapped 2D cross-peaks by using semiautomated combined 2D and 3D data analysis are developed. Using this approach, we have assigned 99% of the protons, including those of the side chains, and identified about 1270 intra- and interresidue proton-proton interactions (fixed distances are not included) in apo-NCS. Comparing our results with those reported recently on 2D NMR studies of apo-NCS [Adjadj, E., Mispelter, J., Quiniou, E., Dimicoli, J.-L., Favadon, V., & Lhoste, J.-M. (1990) Eur. J. Biochem. 190, 263-271; Remerowski M. L., Glaser, S. J., Sieker, L., Samy, T. S. A., & Drobny, G. P. (1990) Biochemistry 29, 8401-8409] demonstrated advantages of proton 3D NMR spectroscopy in protein spectral assignments. We are able to obtain more complete proton resonance and secondary structural assignments and find several misassignments in the earlier report. Strategies utilized in this work should be useful for developing automation procedures for spectral assignments.