In vitro synthesis of heparosan using recombinant Pasteurella multocida heparosan synthase PmHS2

In vertebrates and bacteria, heparosan the precursor of heparin is synthesized by glycosyltransferases via the stepwise addition of UDP-N-acetylglucosamine and UDP-glucuronic acid. As heparin-like molecules represent a great interest in the pharmaceutical area, the cryptic Pasteurella multocida heparosan synthase PmHS2 found to catalyze heparosan synthesis using substrate analogs has been studied. In this paper, we report an efficient way to purify PmHS2 and to maintain its activity stable during 6 months storage at −80 °C using His-tag purification and a desalting step. In the presence of 1 mM of each nucleotide sugar, purified PmHS2 synthesized polymers up to an average molecular weight of 130 kDa. With 5 mM of UDP-GlcUA and 5 mM of UDP-GlcNAc, an optimal specific activity, from 3 to 6 h of incubation, was found to be about 0.145 nmol/μg/min, and polymers up to an average of 102 kDa were synthesized in 24 h. In this study, we show that the chain length distribution of heparosan polymers can be controlled by change of the initial nucleotide sugar concentration. It was observed that low substrate concentration favors the formation of high molecular weight heparosan polymer with a low polydispersity while high substrate concentration did the opposite. Similarities in the polymerization mechanism between PmHS2, PmHS1, and PmHAS are discussed.     

Metabolic engineering of Bacillus subtilis for biosynthesis of heparosan using heparosan synthase from Pasteurella multocida,PmHS1

Heparosan, the capsular polysaccharide discovered in many pathogenic bacteria, is a promising material for heparin preparation. In this study, the Pasteurella multocida heparosan synthase 1 (PmHS1) module was used to synthesize heparosan with controlled molecular weight, while tuaD/gtaB module or gcaD module was responsible for UDP-precursors production in Bacillus subtilis 168. After metabolic pathway optimization, the yield of heparosan was as high as 237.6 mg/L in strain containing PmHS1 module and tuaD/gtaB module, which indicated that these two modules were key factors in heparosan production. The molecular weight of heparosan varied from 39 to 53 kDa, which indicated that heparosan molecular weight could be adjusted by the amount of PmHS1 and the ratio of two UDP precursors. The results showed that it would be possible to produce safe heparosan with appropriate molecular weight which is useful in heparin production.

     

Synthesis of heparosan oligosaccharides by Pasteurella multocida PmHS2 single-action transferases

Pasteurella multocida heparosan synthase PmHS2 is a dual action glycosyltransferase that catalyzes the polymerization of heparosan polymers in a non-processive manner. The two PmHS2 single-action transferases, obtained previously by site-directed mutagenesis, have been immobilized on Ni(II)-nitrilotriacetic acid agarose during the purification step. A detailed study of the polymerization process in the presence of non-equal amounts of PmHS2 single-action transferases revealed that the glucuronyl transferase (PmHS2-GlcUA(+)) is the limiting catalyst in the polymerization process. Using experimental design, it was determined that the N-acetylglucosaminyl transferase (PmHS2-GlcNAc(+)) plays an important role in the control of heparosan chain elongation depending on the number of heparosan chains and the UDP-sugar concentrations present in the reaction mixture. Furthermore, for the first time, the synthesis of heparosan oligosaccharides alternately using PmHS2-GlcUA(+) and PmHS2-GlcNAc(+) is reported. It was shown that the synthesis of heparosan oligosaccharides by PmHS2 single-action transferases do not require the presence of template molecules in the reaction mixture.     

Analysis of the polymerization initiation and activity of Pasteurella multocida heparosan synthase PmHS2, an enzyme with glycosyltransferase and UDP-sugar hydrolase activity

Heparosan synthase catalyzes the polymerization of heparosan (-4GlcUAβ1-4GlcNAcα1-)(n) by transferring alternatively the monosaccharide units from UDP-GlcUA and UDP-GlcNAc to an acceptor molecule. Details on the heparosan chain initiation by Pasteurella multocida heparosan synthase PmHS2 and its influence on the polymerization process have not been reported yet. By site-directed mutagenesis of PmHS2, the single action transferases PmHS2-GlcUA(+) and PmHS2-GlcNAc(+) were obtained. When incubated together in the standard polymerization conditions, the PmHS2-GlcUA(+)/PmHS2-GlcNAc(+) showed comparable polymerization properties as determined for PmHS2. We investigated the first step occurring in heparosan chain initiation by the use of the single action transferases and by studying the PmHS2 polymerization process in the presence of heparosan templates and various UDP-sugar concentrations. We observed that PmHS2 favored the initiation of the heparosan chains when incubated in the presence of an excess of UDP-GlcNAc. It resulted in a higher number of heparosan chains with a lower average molecular weight or in the synthesis of two distinct groups of heparosan chain length, in the absence or in the presence of heparosan templates, respectively. These data suggest that PmHS2 transfers GlcUA from UDP-GlcUA moiety to a UDP-GlcNAc acceptor molecule to initiate the heparosan polymerization; as a consequence, not only the UDP-sugar concentration but also the amount of each UDP-sugar is influencing the PmHS2 polymerization process. In addition, it was shown that PmHS2 hydrolyzes the UDP-sugars, UDP-GlcUA being more degraded than UDP-GlcNAc. However, PmHS2 incubated in the presence of both UDP-sugars favors the synthesis of heparosan polymers over the hydrolysis of UDP-sugars.     

Identification and molecular cloning of a heparosan synthase from Pasteurella multocida type D.

Pasteurella multocida Type D, a causative agent of atrophic rhinitis in swine and pasteurellosis in other domestic animals, produces an extracellular polysaccharide capsule that is a putative virulence factor. It was reported previously that the capsule was removed by treating microbes with heparin lyase III. We molecularly cloned a 617-residue enzyme, pmHS, which is a heparosan (nonsulfated, unepimerized heparin) synthase. Recombinant Escherichia coli-derived pmHS catalyzes the polymerization of the monosaccharides from UDP-GlcNAc and UDP-GlcUA. Other structurally related sugar nucleotides did not substitute. Synthase activity was stimulated about 7-25-fold by the addition of an exogenous polymer acceptor. Molecules composed of approximately 500-3,000 sugar residues were produced in vitro. The polysaccharide was sensitive to the action of heparin lyase III but resistant to hyaluronan lyase. The sequence of the pmHS enzyme is not very similar to the vertebrate heparin/heparan sulfate glycosyltransferases, EXT1 and 2, or to other Pasteurella glycosaminoglycan synthases that produce hyaluronan or chondroitin. The pmHS enzyme is the first microbial dual-action glycosyltransferase to be described that forms a polysaccharide composed of beta4GlcUA-alpha4GlcNAc disaccharide repeats. In contrast, heparosan biosynthesis in E. coli K5 requires at least two separate polypeptides, KfiA and KfiC, to catalyze the same polymerization reaction.     

Identification of a distinct, cryptic heparosan synthase from Pasteurella multocida types A, D, and F

The extracellular polysaccharide capsules of Pasteurella multocida types A, D, and F are composed of hyaluronan, N-acetylheparosan (heparosan or unsulfated, unepimerized heparin), and unsulfated chondroitin, respectively. Previously, a type D heparosan synthase, a glycosyltransferase that forms the repeating disaccharide heparosan backbone, was identified. Here, a approximately 73% identical gene product that is encoded outside of the capsule biosynthesis locus was also shown to be a functional heparosan synthase. Unlike PmHS1, the PmHS2 enzyme was not stimulated greatly by the addition of an exogenous polymer acceptor and yielded smaller- molecular-weight-product size distributions. Virtually identical hssB genes are found in most type A, D, and F isolates. The occurrence of multiple polysaccharide synthases in a single strain invokes the potential for capsular variation.     

Isopycnic characterization of lipopolysaccharides from Pasteurella multocida

In a novel application of an established procedure, isopycnic density gradient centrifugation procedures were used to analyze material obtained from the Westphal phenol extraction procedure of Pasteurella multocida cells. The initial phenol phase contained most of the lipopolysaccharides (LPS) and the major component had a buoyant density of 1.38 g/ml in CsCl density gradients. Repartitioning the phenol phase with an equal volume of water produced a second aqueous phase which contained most of the LPS. This LPS appeared as a single symmetrical band with a buoyant density of 1.40 g/ml. Buoyant density patterns obtained with schlieren optics in CsCl density gradients were useful in characterizing LPSs from P. multocida.     

Molecular characterization of Pasteurella multocida isolates from rabbits

Forty isolates of Pasteurella multocida from healthy (17 isolates) and diseased (23 isolates) rabbits were assayed for the presence of plasmids in seeking to determine whether any correlation exists between the presence of plasmids and health status, sensitivity to antimicrobial agents, capsular and somatic type, and the anatomic site of isolation. Six isolates were found harboring plasmids. A similar ladder pattern ranging from 18 to 3 megadalton (Mda) were found in three isolates recovered from diseased rabbits. One band of molecular weight 6.6 Mda was shared by four of five (4/5) isolates from the diseased rabbits. No correlation was found between the presence of the common plasmids and serotype, resistance to antimicrobial agents, and anatomic sites from which the bacteria were cultured. Random amplification polymorphic DNA was applied to subtype all the isolates of P. multocida. Two single primers were tested for their abilities to generate individual fingerprints by using PCR. Primer 1 grouped the isolates into 7 profiles, and primer 2 grouped them into 15. Random amplified polymorphic DNA-polymerase chain reaction (RAPD-PCR) results show the presence of a wide heterogeneity within P. multocida isolates. Therefore RAPD-PCR is an efficient technique to detect the DNA polymorphism and could be used to discriminate P. multocida of rabbit isolates together with serologic typing.     

Identification and molecular cloning of a chondroitin synthase from Pasteurella multocida type F

Pasteurella multocida Type F, the minor fowl cholera pathogen, produces an extracellular polysaccharide capsule that is a putative virulence factor. It was reported that the capsule was removed by treating microbes with chondroitin AC lyase. We found by acid hydrolysis that the polysaccharide contained galactosamine and glucuronic acid. We molecularly cloned a Type F polysaccharide synthase and characterized its enzymatic activity. The 965-residue enzyme, called P. multocida chondroitin synthase (pmCS), is 87% identical at the nucleotide and the amino acid level to the hyaluronan synthase, pmHAS, from P. multocida Type A. A recombinant Escherichia coli-derived truncated, soluble version of pmCS (residues 1-704) was shown to catalyze the repetitive addition of sugars from UDP-GalNAc and UDP-GlcUA to chondroitin oligosaccharide acceptors in vitro. Other structurally related sugar nucleotide precursors did not substitute in the elongation reaction. Polymer molecules composed of approximately 10(3) sugar residues were produced, as measured by gel filtration chromatography. The polysaccharide synthesized in vitro was sensitive to the action of chondroitin AC lyase but resistant to the action of hyaluronan lyase. This is the first report identifying a glycosyltransferase that forms a polysaccharide composed of chondroitin disaccharide repeats, [beta(1,4)GlcUA-beta(1,3)GalNAc](n). In analogy to known hyaluronan synthases, a single polypeptide species, pmCS, possesses both transferase activities.     

Structure/function analysis of Pasteurella multocida heparosan synthases: toward defining enzyme specificity and engineering novel catalysts

The Pasteurella multocida heparosan synthases, PmHS1 and PmHS2, are homologous (～65% identical) bifunctional glycosyltransferase proteins found in Type D Pasteurella. These unique enzymes are able to generate the glycosaminoglycan heparosan by polymerizing sugars to form repeating disaccharide units from the donor molecules UDP-glucuronic acid (UDP-GlcUA) and UDP-N-acetylglucosamine (UDP-GlcNAc). Although these isozymes both generate heparosan, the catalytic phenotypes of these isozymes are quite different. Specifically, during in vitro synthesis, PmHS2 is better able to generate polysaccharide in the absence of exogenous acceptor (de novo synthesis) than PmHS1. Additionally, each of these enzymes is able to generate polysaccharide using unnatural sugar analogs in vitro, but they exhibit differences in the substitution patterns of the analogs they will employ. A series of chimeric enzymes has been generated consisting of various portions of both of the Pasteurella heparosan synthases in a single polypeptide chain. In vitro radiochemical sugar incorporation assays using these purified chimeric enzymes have shown that most of the constructs are enzymatically active, and some possess novel characteristics including the ability to produce nearly monodisperse polysaccharides with an expanded range of sugar analogs. Comparison of the kinetic properties and the sequences of the wild-type enzymes with the chimeric enzymes has enabled us to identify regions that may be responsible for some aspects of both donor binding specificity and acceptor usage. In combination with previous work, these approaches have enabled us to better understand the structure/function relationship of this unique family of glycosyltransferases.     

Identification and characterization of the Pasteurella multocida toxin translocation domain

The Pasteurella multocida toxin (PMT) is a potent mitogen which enters the cytosol of eukaryotic cells via a low pH membrane translocation event. In common with the Escherichia coli cytotoxic necrotizing factor 1 (CNF1), the core of the PMT translocation domain is composed of two predicted hydrophobic helices (H1 - residues 402-423, H2 - 437-457) linked by a hydrophilic loop (PMT-TL - 424-436). The peptide loop contains three acidic residues (D425, D431 and E434), which may play a role equivalent to D373, D379 and E382/383 in CNF1. To test this hypothesis, a series of point mutants was generated in which acidic residues were mutated into the permanently charged positive residue lysine. Individual mutation of D425, D431 and E434 each caused a four- to sixfold reduction in toxin activity. Interestingly, mutation of D401 located immediately outside the predicted helix-loop-helix motif completely abolished toxin activity. Individual mutations did not affect cell binding nor greatly altered toxin structure, but did prevent translocation of the surface-bound proteins into the cytosol after a low pH pulse. Moreover, we demonstrate using an in vitro assay that PMT undergoes a pH-dependent membrane insertion.     

Critical elements of oligosaccharide acceptor substrates for the Pasteurella multocida hyaluronan synthase

Three-dimensional structures are not available for polysaccharide synthases and only minimal information on the molecular basis for catalysis is known. The Pasteurella multocida hyaluronan synthase (PmHAS) catalyzes the polymerization of the alternating beta1,3-N-acetylglucosamine-beta1,4-glucuronic acid sugar chain by the sequential addition of single monosaccharides to the non-reducing terminus. Therefore, PmHAS possesses both GlcNAc-transferase and glucuronic acid (GlcUA)-transferase activities. The recombinant Escherichia coli-derived PmHAS enzyme will elongate exogenously supplied hyaluronan chains in vitro with either a single monosaccharide or a long chain depending on the UDP-sugar availability. Competition studies using pairs of acceptors with distinct termini (where one oligosaccharide is a substrate that may be elongated, whereas the other cannot) were performed here; the lack of competition suggests that PmHAS contains at least two distinct acceptor sites. We hypothesize that the size of the acceptor binding pockets of the enzyme corresponds to the size of the smallest high efficiency substrates; thus we tested the relative activity of a series of authentic hyaluronan oligosaccharides and related structural analogs. The GlcUA-transferase site readily elongates (GlcNAc-GlcUA)(2), whereas the GlcNAc-transferase elongates GlcUA-Glc-NAc-GlcUA. The minimally sized oligosaccharides, elongated with high efficiency, both contain a trisaccharide with two glucuronic acid residues that enabled the identification of a synthetic, artificial acceptor for the synthase. PmHAS behaves as a fusion of two complete glycosyltransferases, each containing a donor site and an acceptor site, in one polypeptide. Overall, this information advances the knowledge of glycosaminoglycan biosynthesis as well as assists the creation of various therapeutic sugars for medical applications in the future.     

Partial characterization of plasmids from rabbit isolates of Pasteurella multocida.

Plasmids have not been reported for isolates of Pasteurella multocida from rabbits. We assayed 28 isolates of rabbit P. multocida for plasmids and sought to determine whether or not plasmid presence correlated with clinical or pathologic findings, serotype, toxin production, possession of pili, or biochemical characteristics. Fourteen isolates bore a single 1.6 Md (covalently closed circular form in 0.7% agarose gels) plasmid. An additional isolate had two plasmids which migrated as a closely-spaced doublet, centered around 1.6 Md. Eleven isolates appeared to have identical plasmids, according to Hae III and Hinf I digests. The apparent linear size of this common plasmid in 2% agarose gels was 2.1 Md, as calculated from the sums of the sizes of Hae III or Hinf I digestion fragments. Linearization of the common plasmid with Msp I produced an apparent size of 2.5 Md in 0.7% agarose gels. No correlations between presence of the common plasmid and somatic serotype, toxigenicity, presence of pili, antimicrobial resistance, selected biochemical characteristics, anatomic site from which the bacteria were cultured, or disease status of the host were found.     

Purification and characterization of protein H, the major porin of Pasteurella multocida.

Protein H (B. Lugtenberg, R. van Boxtel, D. Evenberg, M. de Jong, P. Storm, and J. Frik, Infect. Immun. 52:175-182, 1986) is the major polypeptide of the outer membrane of Pasteurella multocida, a bacterium pathogenic for humans and animals. We have purified this protein to homogeneity by size exclusion chromatography after selective extraction with surfactants and demonstrated its pore-forming ability after reincorporation into planar lipid bilayers. In these experiments, the current through the pores was a linear function of the applied voltage in the range of -50 to +50 mV. Voltages beyond +/- 50 mV tended to partially close the channels, giving rise to apparent negative resistances. These observations suggest that protein H channels are probably not voltage regulated in vivo. With the patch clamp technique, single-channel conductance fluctuations of 0.33 nS were recorded in 1 M KCl. Electrophoretic and circular dichroism analyses showed that protein H forms homotrimers stable in sodium dodecyl sulfate at room temperature, with a high content of beta-sheet secondary structure. Upon boiling, the trimers were fully dissociated into monomers with an increase of alpha helix and irregular structure, at the expense of beta sheets. The apparent molecular mass of fully denatured monomers ranged between 37 and 41.8 kDa, depending on the electrophoretic system used for analysis. The trimeric arrangement of protein H was confirmed by image analysis of negatively stained, two-dimensional crystal arrays. This morphological study revealed, in agreement with electrophoretical data, a trimeric structure with an overall diameter of 7.7 nm. Each monomer appeared to contain a pore with an average diameter of 1 nm. Quantitative comparisons revealed that the amino acid composition (hydropathy index of -0.40) and the N-terminal sequence (determined over 36 residues) of protein H are similar to those of bacterial general porins, notably porin P2 of Haemophilus influenzae. We conclude from this set of structural and functional data that protein H of P. multocida is a pore-forming protein related to the superfamily of the nonspecific bacterial porins.     

Analysis of the two active sites of the hyaluronan synthase and the chondroitin synthase of Pasteurella multocida

Type A Pasteurella multocida produces a hyaluronan (HA) capsule to enhance infection. The 972-residue HA synthase, pmHAS, polymerizes the linear HA polysaccharide composed of alternating beta3N-acetylglucosamine (GlcNAc)-beta4glucuronic acid (GlcUA). We demonstrated previously that pmHAS possesses two independent glycosyltransferase sites. Here we further define the sites and putative motifs. Deletion of residues 1-117 does not affect HA polymerizing activity. The carboxyl-terminal boundary of the GlcUA-transferase resides within residues 686-703. Both transferase sites contain a DXD motif essential for HA synthase activity. D247N or D249N mutants possessed only GlcUA-transferase activity, whereas D527N or D529N mutants possessed only GlcNAc-transferase activity, further confirming our assignment of the two active sites within the synthase polypeptide. A potential role of the DXD motif in substrate binding was supported by experiments utilizing high UDP-sugar concentrations that partially rescued the activity of certain mutants. The WGGED sequence motif is involved in GlcNAc-transferase activity because mutants with substitutions at E369 or D370 possessed only GlcUA-transferase activity. Type F P. multocida synthesizes an unsulfated chondroitin (beta3GalNAc-beta4GlcUA) capsule. A chimeric enzyme consisting of residues 1-427 of pmHAS and residues 421-704 of pmCS, the homologous chondroitin synthase, was an active HA synthase. The converse chimeric enzyme consisting of residues 1-420 of pmCS and residues 428-703 of pmHAS was a functional chondroitin synthase. Analyses of a panel of pmHAS/pmCS chimeric enzymes identified a 44-residue region, corresponding to pmHAS residues 225-265, involved in UDP-hexosamine selectivity. Overall, these findings further support the model of two independent transferase sites within a single polypeptide.     

Morphology of Pasteurella multocida bacteriophages

Twenty-one tailed phages with icosahedral heads belong to the Myoviridae, Siphoviridae, and Podoviridae families and to four morphological types. Type AU, with 10 phages, has a contractile tail and is morphologically identical with coliphage P2. Lysates contain contracted tail sheaths assembled end-to-end and abnormal structures with long tails and multiple tail sheaths. Types C-2 and 32, with one and three phages, respectively, have long, noncontractile tails. Type 22 includes seven phages, has a short tail, and resembles coliphage T7. Our results agree with previous biological data and suggest that types AU, C-2, 32, and 22 correspond to four different phage species.     

Comamonas testosteronan synthase, a bifunctional glycosyltransferase that produces a unique heparosan polysaccharide analog

Glycosaminoglycans (GAGs) are linear hexosamine-containing polysaccharides. These polysaccharides are synthesized by some pathogenic bacteria to form an extracellular coating or capsule. This strategy forms the basis of molecular camouflage since vertebrates possess naturally occurring GAGs that are essential for life. A recent sequence database search identified a putative protein from the opportunistic pathogen Comamonas testosteroni that exhibits similarity with the Pasteurella multocida GAG synthase PmHS1, which is responsible for the synthesis of a heparosan polysaccharide capsule. Initial supportive evidence included glucuronic acid (GlcUA)-containing polysaccharides extracted from C. testosteroni KF-1. We describe here the cloning and analysis of a novel Comamonas GAG synthase, CtTS. The GAG produced by CtTS in vitro consists of the sugars d-GlcUA and N-acetyl-D-glucosamine, but is insensitive to digestion by GAG digesting enzymes, thus has distinct glycosidic linkages from vertebrate GAGs. The backbone structure of the polysaccharide product [-4-D-GlcUA-α1,4-D-GlcNAc-α1-](n) was confirmed by nuclear magnetic resonance. Therefore, this novel GAG, testosteronan, consists of the same sugars as the biomedically relevant GAGs heparosan (N-acetyl-heparosan) and hyaluronan but may have distinct properties useful for future medical applications.     

The capsule biosynthetic locus of Pasteurella multocida A:1

Pasteurella multocida is the aetiological agent of fowl cholera, bovine haemorrhagic septicaemia and atrophie rhinitis in pigs. Many strains of P. multocida express a capsule on their surface. However, nothing is known about the capsule biosynthetic locus in P. multocida although the capsule has been implicated as a virulence factor. The entire capsule locus of P. multocida A:1 was cloned and sequenced. The locus is divided into three regions. Region 1 comprises four ORFs which are involved in the transport of the capsule polysaccharide to the surface. Region 2 comprises five ORFs whose postulated protein products are involved in the biosynthesis of the polysaccharide capsule. Region 3 comprises two ORFs whose postulated products show similarity to proteins that are involved in the phospholipid substitution of the polysaccharide capsule.