Loop 1 of transducer region in mammalian class I myosin, Myo1b, modulates actin affinity, ATPase activity, and nucleotide access

Loop 1, a flexible surface loop in the myosin motor domain, comprises in part the transducer region that lies near the nucleotide-binding site and is proposed from structural studies to be responsible for the kinetic tuning of product release following ATP hydrolysis (1). Biochemical studies have shown that loop 1 affects the affinity of actin-myosin-II for ADP, motility and the V(max) of the actin-activated Mg2+-ATPase activity, possibly through P(i) release (2-8). To test the influence of loop 1 on the mammalian class I myosin, Myo1b, chimeric molecules in which (i) loop 1 of a truncated form of Myo1b, Myo1b1IQ, was replaced with either loop 1 from other myosins; (ii) loop 1 was replaced with glycine; or (iii) some amino acids in the loop were substituted with alanine and were expressed in baculovirus, and their interactions with actin and nucleotide were evaluated. The steady-state actin-activated ATPase activity; rate of ATP-induced dissociation of actin from Myo1b1IQ; rate of ADP release from actin-Myo1b1IQ; and the affinity of actin for Myo1b1IQ and Myo1b1IQ.ADP differed in the chimeras versus wild type, indicating that loop 1 has a much wider range of effects on the coupling between actin and nucleotide binding events than previously thought. In particular, the biphasic ATP-induced dissociation of actin from actin-Myo1b1IQ was significantly altered in the chimeras. This provided evidence that loop 1 contributes to the accessibility of the nucleotide pocket and is involved in the integration of information from the actin-, nucleotide-, gamma-P(i)-, and calmodulin-binding sites and predicts that loop 1 modulates the load dependence of the motor.     

Addition of lysines to the 50/20 kDa junction of myosin strengthens weak binding to actin without affecting the maximum ATPase activity

Much interest has centered on two surface loops in the motor domain to explain the differences in enzymatic and mechanical properties of myosin isoforms. We showed that two invariant lysines at the C-terminal end of loop 2, which is part of the actin-binding interface, are required to obtain actin activation [Joel et al. (2001) J. Biol. Chem. 276, 2998-3003]. Here we investigate the effects of increasing positive charge in the variable portion of loop 2 of smooth muscle heavy meromyosin (smHMM). Increasing the net positive charge by +4 increased the affinity for actin in the presence and absence of ATP. The K(m) for actin-activated ATPase activity decreased 15-fold, but V(max) was unchanged, showing that "weak binding" of myosin for actin can be significantly strengthened without increasing the rate-limiting step for V(max). The mutant HMM had slower rates of in vitro motility and ADP release compared to WT HMM. ADP release and motility, which were both salt-dependent, correlated linearly with each other. Loop 2 thus plays a major role in setting the affinity for actin but also affects ADP release and motility. Because the actin- and nucleotide-binding regions communicate, mutations to one region can impact multiple facets of myosin's mechanical and enzymatic properties.     

The myosin cardiac loop participates functionally in the actomyosin interaction

The motor protein myosin in association with actin transduces chemical free energy in ATP into work in the form of actin translation against an opposing force. Mediating the actomyosin interaction in myosin is an actin binding site distributed among several peptides on the myosin surface including surface loops contributing to affinity and actin regulation of myosin ATPase. A structured surface loop on beta-cardiac myosin, the cardiac or C-loop, was recently demonstrated to affect myosin ATPase and was indirectly implicated in the actomyosin interaction. The C-loop is a conserved feature of all myosin isoforms with crystal structures, suggesting that it is an essential part of the core energy transduction machinery. It is shown here that proteolytic digestion of the C-loop in beta-cardiac myosin eliminates actin-activated myosin ATPase and reduces actomyosin affinity in rigor more than 100-fold. Studies of C-loop function in smooth muscle myosin were also undertaken using site-directed mutagenesis. Mutagenesis of a single charged residue in the C-loop of smooth muscle myosin alters actomyosin affinity and doubles myosin in vitro motility and actin-activated ATPase velocities, thereby involving a charged region of the loop in the actomyosin interaction. It appears likely that the C-loop is an essential electrostatic binding site for actin involved in modulation of actomyosin affinity and regulation of actomyosin ATPase velocity.     

Two conserved lysines at the 50/20-kDa junction of myosin are necessary for triggering actin activation

Actin stimulates myosin's activity by inducing structural alterations that correlate with the transition from a weakly to a strongly bound state, during which time inorganic phosphate (P(i)) is released from myosin's active site. The surface loop at the 50/20-kDa junction of myosin (loop 2) is part of the actin interface. Here we demonstrate that elimination of two highly conserved lysines at the C-terminal end of loop 2 specifically blocks the ability of heavy meromyosin to undergo a weak to strong binding transition with actin in the presence of ATP. Removal of these lysines has no effect on strong binding in the absence of nucleotide, on the rate of ADP binding or release, or on the basal ATPase activity. We further show that the 16 amino acids of loop 2 preceding the lysine-rich region are not essential for actin activation, although they do modulate myosin's affinity for actin in the presence of ATP. We conclude that interaction of the conserved lysines with acidic residues in subdomain 1 of actin either triggers a structural change or stabilizes a conformation that is necessary for actin-activated release of P(i) and completion of the ATPase cycle.     

Functional characterization of the secondary actin binding site of myosin II

The role of the interaction between actin and the secondary actin binding site of myosin (segment 565-579 of rabbit skeletal muscle myosin, referred to as loop 3 in this work) has been studied with proteolytically generated smooth and skeletal muscle myosin subfragment 1 and recombinant Dictyostelium discoideum myosin II motor domain constructs. Carbodiimide-induced cross-linking between filamentous actin and myosin loop 3 took place only with the motor domain of skeletal muscle myosin and not with those of smooth muscle or D. discoideum myosin II. Chimeric constructs of the D. discoideum myosin motor domain containing loop 3 of either human skeletal muscle or nonmuscle myosin were generated. Significant actin cross-linking to the loop 3 region was obtained only with the skeletal muscle chimera both in the rigor and in the weak binding states, i.e., in the absence and in the presence of ATP analogues. Thrombin degradation of the cross-linked products was used to confirm the cross-linking site of myosin loop 3 within the actin segment 1-28. The skeletal muscle and nonmuscle myosin chimera showed a 4-6-fold increase in their actin dissociation constant, due to a significant increase in the rate for actin dissociation (k(-)(A)) with no significant change in the rate for actin binding (k(+A)). The actin-activated ATPase activity was not affected by the substitutions in the chimeric constructs. These results suggest that actin interaction with the secondary actin binding site of myosin is specific for the loop 3 sequence of striated muscle myosin isoforms but is apparently not essential either for the formation of a high affinity actin-myosin interface or for the modulation of actomyosin ATPase activity.     

The myosin relay helix to converter interface remains intact throughout the actomyosin ATPase cycle

Crystal structures of the myosin motor domain in the presence of different nucleotides show the lever arm domain in two basic angular states, postulated to represent prestroke and poststroke states, respectively (Rayment, I. (1996) J. Biol. Chem. 271, 15850-15853; Dominguez, R., Freyzon, Y., Trybus, K. M., and Cohen, C. (1998) Cell 94, 559-571). Contact is maintained between two domains, the relay and the converter, in both of these angular states. Therefore it has been proposed by Dominguez et al. (cited above) that this contact is critical for mechanically driving the angular change of the lever arm domain. However, structural information is lacking on whether this contact is maintained throughout the actin-activated myosin ATPase cycle. To test the functional importance of this interdomain contact, we introduced cysteines into the sequence of a "cysteine-light" myosin motor at position 499 on the lower cleft and position 738 on the converter domain (Shih, W. M., Gryczynski, Z., Lakowicz, J. L., and Spudich, J. A. (2000) Cell 102, 683-694). Disulfide cross-linking could be induced. The cross-link had minimal effects on actin binding, ATP-induced actin release, and actin-activated ATPase. These results demonstrate that the relay/converter interface remains intact in the actin strongly bound state of myosin and throughout the entire actin-activated myosin ATPase cycle.     

Effect of caldesmon on the ATPase activity and the binding of smooth and skeletal myosin subfragments to actin

We have previously shown that inhibition of the ATPase activity of skeletal muscle myosin subfragment 1 (S1) by caldesmon is correlated with the inhibition of S1 binding in the presence of ATP or pyrophosphate (Chalovich, J., Cornelius, P., and Benson, C. (1987) J. Biol Chem. 262, 5711-5716). In contrast, Lash et al. (Lash, J., Sellers, J., and Hathaway, D. (1986) J. Biol. Chem. 261, 16155-16160) have shown that the inhibition of ATPase activity of smooth muscle heavy meromyosin (HMM) by caldesmon is correlated with an increase in the binding of HMM to actin in the presence of ATP. We now show, in agreement, that caldesmon does increase the binding of smooth muscle HMM to actin-tropomyosin while decreasing the ATPase activity. The effect of caldesmon on the binding of smooth HMM is reversed by Ca2+-calmodulin. Caldesmon strengthens the binding of smooth S1.ATP and skeletal HMM.ATP to actin-tropomyosin but to a lesser extent than smooth HMM.ATP. Furthermore, this increase in binding of smooth S1.ATP and skeletal HMM.ATP does not parallel the inhibition of ATPase activity. In contrast, in the absence of ATP, all smooth and skeletal myosin subfragments compete with caldesmon for binding to actin. Thus, the effect that caldesmon has on the binding of myosin subfragments to actin-tropomyosin depends on the source of myosin, the type of subfragment, and the nucleotide present. The inhibition of actin-activated ATP hydrolysis by caldesmon, however, is not greatly different for different smooth and skeletal myosin subfragments. Evidence is presented that caldesmon inhibits actin-activated ATP hydrolysis by attenuating the productive interaction between myosin and actin that normally accelerates ATP hydrolysis. The increased binding seen by some myosin subfragments, in the presence of ATP, may be due to binding of these subfragments to a nonproductive site on actin-caldesmon. The subfragments which show an increase in binding in the presence of ATP and caldesmon appear to bind directly to caldesmon as demonstrated by affinity chromatography.     

Functional role of loop 2 in myosin V

Myosin V is molecular motor that is capable of moving processively along actin filaments. The kinetics of monomeric myosin V containing a single IQ domain (MV 1IQ) differ from nonprocessive myosin II in that actin affinity is higher, phosphate release is extremely rapid, and ADP release is rate-limiting. We generated two mutants of myosin V by altering loop 2, a surface loop in the actin-binding region thought to alter actin affinity and phosphate release in myosin II, to determine the role that this loop plays in the kinetic tuning of myosin V. The loop 2 mutants altered the apparent affinity for actin (K(ATPase)) without altering the maximum ATPase rate (V(MAX)). Transient kinetic analysis determined that the rate of binding to actin, as well as the affinity for actin, was dependent on the net positive charge of loop 2, while other steps in the ATPase cycle were unchanged. The maximum rate of phosphate release was unchanged, but the affinity for actin in the M.ADP.Pi-state was dramatically altered by the mutations in loop 2. Thus, loop 2 is important for allowing myosin V to bind to actin with a relatively high affinity in the weak binding states but does not play a direct role in the product release steps. The ability to maintain a high affinity for actin in the weak binding states may prevent diffusion away from the actin filament and increase the degree of processive motion of myosin V.     

A conserved negatively charged amino acid modulates function in human nonmuscle myosin IIA

A myosin surface loop (amino acids 391-404) is postulated to be an important actin binding site. In human beta-cardiac myosin, mutation of arginine-403 to a glutamine or a tryptophan causes hypertrophic cardiomyopathy. There is a phosphorylatable serine or threonine residue present on this loop in some lower eukaryotic myosin class I and myosin class VI molecules. Phosphorylation of the myosin I molecules at this site regulates their enzymatic activity. In almost all other myosins, the homologous residue is either a glutamine or an aspartate, suggesting that a negative charge at this location is important for activity. To study the function of this loop, we have used site-directed mutagenesis and baculovirus expression of a heavy meromyosin- (HMM-) like fragment of human nonmuscle myosin IIA. An R393Q mutation (equivalent to the R403Q mutation in human beta-cardiac muscle myosin) has essentially no effect on the actin-activated MgATPase or in vitro motility of the expressed HMM-like fragment. Three mutations, D399K, D399A, and a deletion mutation that removes residues 393-402, all decrease both the V(max) of the actin-activated MgATPase by 8-10-fold and the rate of in vitro motility by a factor of 2-3. The K(ATPase) of the actin-activated MgATPase activity and the affinity constant for binding of HMM to actin in the presence of ADP are affected by less than a factor of 2. These data support an important role for the negative charge at this location but show that it is not critical to enzymatic activity.     

Regulation of the actin-activated ATPase activity of Acanthamoeba myosin I by cross-linking actin filaments

The actin-activated Mg2+-ATPase activity of phosphorylated Acanthamoeba myosin I was previously shown to be cooperatively dependent on the myosin concentration (Albanesi, J. P., Fujisaki, H., and Korn, E. D. (1985) J. Biol. Chem. 260, 11174-11179). This observation was rationalized by assuming that myosin I contains a high-affinity and a low-affinity F-actin-binding site and that binding at the low-affinity site is responsible for the actin-activated ATPase activity. Therefore, enzymatic activity would correlate with the cross-linking of actin filaments by myosin I, and the cooperative increase in specific activity at high myosin:actin ratios would result from the fact that cross-linking by one myosin molecule would increase the effective F-actin concentration for neighboring myosin molecules. This model predicts that high specific activity should occur at myosin:actin ratios below that required for cooperative interactions if the actin filaments are cross-linked by catalytically inert cross-linking proteins. This prediction has been confirmed by cross-linking actin filaments with either of three gelation factors isolated from Acanthamoeba, one of which has not been previously described, or by enzymatically inactive unphosphorylated Acanthamoeba myosin I.     

Effect of actin filament length and filament number concentration on the actin-activated ATPase activity of Acanthamoeba myosin I

The actin-activated Mg2+-ATPase activities of phosphorylated Acanthamoeba myosins IA and IB were previously found to have a highly cooperative dependence on myosin concentration (Albanesi, J. P., Fujisaki, H., and Korn, E. D. (1985) J. Biol. Chem. 260, 11174-11179). This behavior is reflected in the requirement for a higher concentration of F-actin for half-maximal activation of the myosin Mg2+-ATPase at low ratios of myosin:actin (noncooperative phase) than at high ratios of myosin:actin (cooperative phase). These phenomena could be explained by a model in which each molecule of the nonfilamentous myosins IA and IB contains two F-actin-binding sites of different affinities with binding of the lower affinity site being required for expression of actin-activated ATPase activity. Thus, enzymatic activity would coincide with cross-linking of actin filaments by myosin. This theoretical model predicts that shortening the actin filaments and increasing their number concentration at constant total F-actin should increase the myosin concentration required to obtain the cooperative increase in activity and should decrease the F-actin concentration required to reach half-maximal activity at low myosin:actin ratios. These predictions have been experimentally confirmed by shortening actin filaments by addition of plasma gelsolin, an F-actin capping/severing protein. In addition, we have found that actin "filaments" as short as the 1:2 gelsolin-actin complex can significantly activate Acanthamoeba myosin I.     

Kinetic mechanism of blebbistatin inhibition of nonmuscle myosin IIb

We examined the effect of blebbistatin on the kinetic properties of nonmuscle myosin IIB subfragment 1 (NMIIB S1). Blebbistatin is a small molecule that affects cell blebbing during the process of cell division, which has been shown to decrease the myosin ATPase activity of a number of myosins [Straight et al. (2003) Science 299, 1743-1747]. The steady-state actin-activated ATPase activity of NMIIB S1 was decreased approximately 90% at 40 microM actin in the presence of blebbistatin. Stopped-flow techniques were employed to elucidate the effect of blebbistatin on the various steps of the NMIIB S1 cross-bridge cycle. Blebbistatin did not affect ATP binding and hydrolysis. Binding to actin in the presence of ADP (0.57 +/-0.08 microM(-1) s(-1)) was reduced slightly in the presence of blebbistatin (0.38 +/- 0.03 microM(-1) s(-1)), while mantADP dissociation from acto-NMIIB S1 was reduced (approximately 30%). P(i) release was blocked in the presence of blebbistatin. Accordingly, the apparent affinity of NMIIB S1 for actin in the presence of ATP was greatly reduced. Based on the above data, we surmise that blebbistatin inhibits the ATPase activity of NMIIB S1 primarily by blocking entry into the strong binding state; secondarily, it reduces the rate of ADP release. These effects are likely mediated by binding of blebbistatin within the myosin cleft that progressively closes in forming the acto-myosin rigor state.     

ATPase activities and actin-binding properties of subfragments of Acanthamoeba myosin IA

Previous studies had led to the conclusion that the globular, single-headed myosins IA and IB from Acanthamoeba castellanii contain two actin-binding sites: one associated with the catalytic site and whose binding to F-actin activates the Mg2+-ATPase activity and a second site whose binding results in the cross-linking of actin filaments and makes the actin-activated ATPase activity positively cooperative with respect to myosin I concentration. We have now prepared a 100,000-Da NH2-terminal peptide and a 30,000-Da COOH-terminal peptide by alpha-chymotryptic digestion of the myosin IA heavy chain. The intact 17,000-Da light chain remained associated with the 100,000-Da fragment, which also contained the serine residue that must be phosphorylated for expression of actin-activated ATPase activity by native myosin IA. The 30,000-Da peptide, which contained 34% glycine and 21% proline, bound to F-actin with a KD less than 0.5 microM in the presence or absence of ATP but had no ATPase activity. The 100,000-Da peptide bound to F-actin with KD = 0.4-0.8 microM in the presence of 2 mM MgATP and KD less than 0.01 microM in the absence of MgATP. In contrast to native myosin IA, neither peptide cross-linked actin filaments. The phosphorylated 100,000-Da peptide had actin-activated ATPase activity with the same Vmax as that of native phosphorylated myosin IA but this activity displayed simple, noncooperative hyperbolic dependence on the actin concentration in contrast to the complex cooperative kinetics observed with native myosin IA. These results provide direct experimental evidence for the presence of two actin-binding sites on myosin IA, as was suggested by enzyme kinetic and filament cross-linking data, and also for the previously proposed mechanism by which monomeric myosins I could support contractile activities.     

Dual regulation of mammalian myosin VI motor function

Myosin VI is expressed in a variety of cell types and is thought to play a role in membrane trafficking and endocytosis, yet its motor function and regulation are not understood. The present study clarified mammalian myosin VI motor function and regulation at a molecular level. Myosin VI ATPase activity was highly activated by actin with K(actin) of 9 microm. A predominant amount of myosin VI bound to actin in the presence of ATP unlike conventional myosins. K(ATP) was much higher than those of other known myosins, suggesting that myosin VI has a weak affinity or slow binding for ATP. On the other hand, ADP markedly inhibited the actin-activated ATPase activity, suggesting a high affinity for ADP. These results suggested that myosin VI is predominantly in a strong actin binding state during the ATPase cycle. p21-activated kinase 3 phosphorylated myosin VI, and the site was identified as Thr(406). The phosphorylation of myosin VI significantly facilitated the actin-translocating activity of myosin VI. On the other hand, Ca(2+) diminished the actin-translocating activity of myosin VI although the actin-activated ATPase activity was not affected by Ca(2+). Calmodulin was not dissociated from the heavy chain at high Ca(2+), suggesting that a conformational change of calmodulin upon Ca(2+) binding, but not its physical dissociation, determines the inhibition of the motility activity. The present results revealed the dual regulation of myosin VI by phosphorylation and Ca(2+) binding to calmodulin light chain.     

Mechanism of regulation of Acanthamoeba myosin-IC by heavy-chain phosphorylation

The ATPase activity of myosin-Is from lower eukaryotes is activated by phosphorylation by the p21-activated kinase family at the TEDS site on an actin-binding surface-loop. This actin-binding loop is the site of a cardiac myosin-II mutation responsible for some forms of familial hypertrophic cardiomyopathy. To determine the mechanism of myosin-I regulation by heavy-chain phosphorylation (HCP) and to better understand the importance of this loop in the function of all myosin isoforms, we performed a kinetic investigation of the regulatory mechanism of the Acanthamoeba myosin-IC motor domain (MIC(IQ)). Phosphorylated and dephosphorylated MIC(IQ) show actin-activated ATPase activity; however, HCP increases the ATPase activity >20-fold. HCP does not greatly affect the rate of phosphate release from MIC in the absence of actin, as determined by single turnover experiments. Additionally, HCP does not significantly affect the affinity of myosin for actin in the absence or presence of ATP, the rate of ATP-induced dissociation of actoMIC(IQ), the affinity of ADP, or the rate of ADP release. Sequential-mix single-turnover experiments show that HCP regulates the rate of phosphate release from actin-bound MIC(IQ). We propose that the TEDS-containing actin-binding loop plays a direct role in regulating phosphate release and the force-generating (A-to-R) transition of myosin-IC.     

Kinetic mechanism of human myosin IIIA

Myosin IIIA is specifically expressed in photoreceptors and cochlea and is important for the phototransduction and hearing processes. In addition, myosin IIIA contains a unique N-terminal kinase domain and C-terminal tail actin-binding motif. We examined the kinetic properties of baculovirus expressed human myosin IIIA containing the kinase, motor, and two IQ domains. The maximum actin-activated ATPase rate is relatively slow (k(cat) = 0.77 +/- 0.08 s(-1)), and high actin concentrations are required to fully activate the ATPase rate (K(ATPase) = 34 +/- 11 microm). However, actin co-sedimentation assays suggest that myosin III has a relatively high steady-state affinity for actin in the presence of ATP (K(actin) approximately 7 microm). The rate of ATP binding to the motor domain is quite slow both in the presence and absence of actin (K(1)k(+2) = 0.020 and 0.001 microm(-1).s(-1), respectively). The rate of actin-activated phosphate release is more than 100-fold faster (85 s(-1)) than the k(cat), whereas ADP release in the presence of actin follows a two-step mechanism (7.0 and 0.6 s(-1)). Thus, our data suggest a transition between two actomyosin-ADP states is the rate-limiting step in the actomyosin III ATPase cycle. Our data also suggest the myosin III motor spends a large fraction of its cycle in an actomyosin ADP state that has an intermediate affinity for actin (K(d) approximately 5 microm). The long lived actomyosin-ADP state may be important for the ability of myosin III to function as a cellular transporter and actin cross-linker in the actin bundles of sensory cells.     

Regulation of actomyosin ATPase by a single calcium-binding site on troponin C from crayfish

Equilibrium-binding studies at 4 degrees C show that, in the instance of crayfish, troponin C contains only one Ca-binding site with an affinity in the range of physiological free [CA2+] (K = 2 X 10(5) M-1). At physiological levels of Mg2+, this site does not bind Mg2+. In the complexes of troponin C-troponin I, troponin and troponin-tropomyosin, the regulatory Ca-specific site exhibits a 10- to 20-fold higher affinity (K = 2-4 X 10(6) M-1). The latter affinity is reduced to that of troponin C upon incorporation of the troponin-tropomyosin complex into the actin filament (regulated actin), as determined at 4 degrees C by the double isotope technique. The Ca-binding constant is again shifted to a higher value (7 X 10(6) M-1) when regulated actin is associated with nucleotide-free myosin. Both crayfish myofibrils and rabbit actomyosin regulated by crayfish troponin-tropomyosin display a steep rise in ATPase activity with [Ca2+]. Comparison of the pCa/ATPase relationship and the Ca-binding properties at 25 degrees C for the crayfish troponin-regulated actomyosin indicates that while the threshold [Ca2+] for activation corresponds to the range of [Ca2+] where the regulatory site in its low affinity state (K = 1 X 10(5) M-1) starts to bind Ca2+ significantly, full activation is reached at [Ca2+] for which the Ca-specific site in its high affinity state (K = 3 X 10(6) M-1) approaches saturation. These results suggest that, in the actomyosin ATPase cycle, there are at least two calcium-activated states of regulated actin (one low and one high), the high affinity state being induced by interactions of myosin with actin in the cycle.     

Enhancement of the actin-activated ATPase activity of myosin from canine cardiac ventricle by purealin

The effects of purealin isolated from the sea sponge, Psammaplysilla purea, on the enzymatic properties of myosin and natural actomyosin (a complex of myosin, actin, tropomyosin and troponin) from canine cardiac ventricle were studied. Purealin increased the ATPase activity of natural actomyosin and the actin-activated ATPase activity of myosin, and accelerated the superprecipitation of natural actomyosin. The Ca2+- and Mg2+-ATPase activities of myosin were inhibited by purealin, whereas the K+-EDTA-ATPase activity was increased. These results suggest that purealin binds to the myosin portion involved in actin-myosin interaction and increases the actin-activated ATPase activity of myosin.     

The tail domain of myosin Va modulates actin binding to one head

Calcium activates full-length myosin Va steady-state enzymatic activity and favors the transition from a compact, folded "off" state to an extended "on" state. However, little is known of how a head-tail interaction alters the individual actin and nucleotide binding rate and equilibrium constants of the ATPase cycle. We measured the effect of calcium on nucleotide and actin filament binding to full-length myosin Va purified from chick brains. Both heads of nucleotide-free myosin Va bind actin strongly, independent of calcium. In the absence of calcium, bound ADP weakens the affinity of one head for actin filaments at equilibrium and upon initial encounter. The addition of calcium allows both heads of myosin Va.ADP to bind actin strongly. Calcium accelerates ADP binding to actomyosin independent of the tail but minimally affects ATP binding. Although 18O exchange and product release measurements favor a mechanism in which actin-activated Pi release from myosin Va is very rapid, independent of calcium and the tail domain, both heads do not bind actin strongly during steady-state cycling, as assayed by pyrene actin fluorescence. In the absence of calcium, inclusion of ADP favors formation of a long lived myosin Va.ADP state that releases ADP slowly, even after mixing with actin. Our results suggest that calcium activates myosin Va by allowing both heads to interact with actin and exchange bound nucleotide and indicate that regulation of actin binding by the tail is a nucleotide-dependent process favored by linked conformational changes of the motor domain.     

Effects of phosphorylation, magnesium, and filament assembly on actin-activated ATPase of pig urinary bladder myosin

The relationship between the light-chain phosphorylation and the actin-activated ATPase activity of pig urinary bladder myosin was either linear or nonlinear depending on the free Mg2+ concentration. Varying the free [Mg2+] in the presence of 50 mM ionic strength (I) had a biphasic effect on the actin-activated ATPase. In 100 mM I, the activity increased on raising the free [Mg2+]. The activity of the phosphorylated myosin was 3-23-fold higher than that of the unphosphorylated myosin at all concentrations of free Mg2+, pH, and temperature used in this study. The increase in the turbidity and sedimentability of both phosphorylated and unphosphorylated myosins on raising the free [Mg2+] was associated with a rise in the actin-activated ATPase activity. However, myosin light-chain phosphorylation still had a remarkable effect on the actin activation. The myosin polymers formed under these conditions were sedimented by centrifugation. Experiments performed with myosin polymers formed in mixtures of unphosphorylated and phosphorylated myosins showed that the presence of phosphorylated myosin in these mixtures had a slight effect on the sedimentation of the unphosphorylated myosin but it had no effect on the actin-activated ATP hydrolysis. Electron microscopy showed that the unphosphorylated myosin formed unorganized aggregates while phosphorylated myosin molecules assembled into bipolar filaments with tapered ends. These data show that although the unphosphorylated and phosphorylated myosins have the same level of sedimentability and turbidity, the filament assembly present only with the phosphorylated myosin can be associated with the maximal actin activation of Mg-ATPase.