Experimental study and analysis of mechanical properties of frozen rabbit aorta by fracture mechanics approach

In order to investigate fracture problems associated with cryopreservation of aorta, experiments were carried out to study the effects of temperature, freezing rate and cryoprotective agent on the fracture mechanics properties of frozen rabbit aorta and a test method for crack criterion of frozen rabbit aorta was developed. Results showed that as temperature decreases, the fracture modes of frozen rabbit aorta changed from typical ductile fracture to typical brittle fracture, the crack was more difficult to grow as temperature decreased, and its resist-fracture ability weakened remarkably from -20 to -80 degrees C. However, freezing rates had no effects on the fracture modes when sample was cooled to -50 degrees C, while the resist-fracture ability was stronger when the sample was cooled at a higher freezing rate. Due to the hydration action of dimethyl sulphoxide (DMSO), the rabbit aorta permeated by 10% (v/v) DMSO presented typical ductile fracture when it was cooled to -50 degrees C, so its resist-fracture ability was enhanced obviously. Compared to the axial sample, the circumferential sample's resist-fracture ability is better because of its larger deformation energy available.     

Pressure shift freezing of pork muscle: effect on color, drip loss, texture, and protein stability

Cylindrical specimens (50 mm diameter and 160 mm length) of fresh pork muscle (boneless rib portions) packed in plastic bags were frozen by pressure shift freezing (PSF) at 100, 150, and 200 MPa, air blast freezing (ABF), and liquid immersion freezing (LIF). Temperature and phase transformations of the muscle tissue were monitored during the freezing process at three locations: center, midway between the center and the surface, and near the surface. Pork muscle quality changes [color, drip loss (both thawing and cooking), texture (shear force), and protein stability (DSC thermal profiles)] were evaluated after thawing the frozen samples at room temperature (20 degrees C). Employing pressures above 150 MPa caused very significant (P < 0.01) color changes in pork muscle during the PSF process. The PSF process reduced thawing drip loss of pork muscle but did not cause obvious changes in total drip loss following thawing and subsequent cooking. PSF at 150 and 200 MPa resulted in considerable denaturation of myofibrillar proteins of pork muscle. The PSF process also caused an increase in the pork muscle toughness as compared with that of unfrozen, ABF, and LIF samples.     

Freeze-fracture electron microscopy

The freeze-fracture technique consists of physically breaking apart (fracturing) a frozen biological sample; structural detail exposed by the fracture plane is then visualized by vacuum-deposition of platinum-carbon to make a replica for examination in the transmission electron microscope. The four key steps in making a freeze-fracture replica are (i) rapid freezing, (ii) fracturing, (iii) replication and (iv) replica cleaning. In routine protocols, a pretreatment step is carried out before freezing, typically comprising fixation in glutaraldehyde followed by cryoprotection with glycerol. An optional etching step, involving vacuum sublimation of ice, may be carried out after fracturing. Freeze fracture is unique among electron microscopic techniques in providing planar views of the internal organization of membranes. Deep etching of ultrarapidly frozen samples permits visualization of the surface structure of cells and their components. Images provided by freeze fracture and related techniques have profoundly shaped our understanding of the functional morphology of the cell.     

The role of side chain conformational flexibility in surface recognition by Tenebrio molitor antifreeze protein

Two-dimensional nuclear magnetic resonance spectroscopy was used to investigate the flexibility of the threonine side chains in the beta-helical Tenebrio molitor antifreeze protein (TmAFP) at low temperatures. From measurement of the (3)J(alphabeta) (1)H-(1)H scalar coupling constants, the chi(1) angles and preferred rotamer populations can be calculated. It was determined that the threonines on the ice-binding face of the protein adopt a preferred rotameric conformation at near freezing temperatures, whereas the threonines not on the ice-binding face sample many rotameric states. This suggests that TmAFP maintains a preformed ice-binding conformation in solution, wherein the rigid array of threonines that form the AFP-ice interface matches the ice crystal lattice. A key factor in binding to the ice surface and inhibition of ice crystal growth appears to be the close surface-to-surface complementarity between the AFP and crystalline ice, and the lack of an entropic penalty associated with freezing out motions in a flexible ligand.     

Cryobehavior of the plasma membrane in protoplasts isolated from cold-acclimated Arabidopsis leaves is related to surface area regulation

Extracellular freezing in plants results in dehydration and mechanical stresses upon the plasma membrane. Plants that acquire enhanced freezing tolerance after cold acclimation can withstand these two physical stresses. To understand the tolerance to freeze-induced physical stresses, the cryobehavior of the plasma membrane was observed using protoplasts isolated from cold-acclimated Arabidopsis thaliana leaves with the combination of a lipophilic fluorescent dye FM 1-43 and cryomicroscopy. We found that many vesicular structures appeared in the cytoplasmic region near the plasma membrane just after extracellular freezing occurred. These structures, referred to as freeze-induced vesicular structures (FIVs), then developed horizontally near the plasma membrane during freezing. There was a strong correlation between the increase in individual FIV size and the decrease in the surface area of the protoplasts during freezing. Some FIVs fused with their neighbors as the temperature decreased. Occasionally, FIVs fused with the plasma membrane, which may be necessary to relax the stress upon the plasma membrane during freezing. Vesicular structures resembling FIVs were also induced when protoplasts were mechanically pressed between a coverslip and slide glass. Fewer FIVs formed when protoplasts were subjected to hyperosmotic solution, suggesting that FIV formation is associated with mechanical stress rather than dehydration. Collectively, these results suggest that cold-acclimated plant cells may balance membrane tension in the plasma membrane by regulating the surface area. This enables plant cells to withstand the direct mechanical stress imposed by extracellular freezing.     

Effect of freezing and thawing rates on the post-thaw viability of boar spermatozoa frozen in FlatPacks and Maxi-straws

The effects of different freezing and thawing rates on the post-thaw motility and membrane integrity of boar spermatozoa, processed as split samples in Maxi-straws or flat PET-plastic packages (FlatPack) were studied. A programmable freezing device was used to obtain freezing rates of either 20, 50 or 80 degrees C/min. Thawing of the samples was performed in a bath of circulating water; for 40s at 50 degrees C or 27s at 70 degrees C for Maxi-straws and 23s at 35 degrees C, 13s at 50 degrees C or 8s at 70 degrees C for the FlatPacks. Sperm motility was assessed both visually and with a computer assisted semen analysis (CASA) apparatus, while plasma membrane integrity was assessed using the fluorescent probes Calcein AM and ethidium homodimer-1. Temperature changes during freezing and thawing were monitored in both forms of packaging. Values for motile spermatozoa, sperm velocity and lateral head displacement variables were significantly (p<0.05) higher for samples frozen in FlatPacks than in Maxi-straws, with superior results at higher thawing rates. Freezing at 50 degrees C/min yielded better motility than 20 or 80 degrees C/min, although the effect was rather small. Neither freezing rate nor thawing rate had any effect on membrane integrity (p>0.05). A significant boar effect was seen for several parameters. The most striking difference in temperature courses between containers was a 4-5-fold lowering of the thawing rate, between -20 and 0 degrees C, in the center of the Maxi-straw, compared with the FlatPack. This is apparently due to the insulating effect of the thawed water in the periphery of the Maxi-straw. The improvement in sperm motility seen when using the FlatPack appears to be related to the rapid thawing throughout the sample, which decreases the risk of cell damage due to recrystallization during thawing. Since sperm motility patterns have been reported to be correlated with fertility both in vitro and in vivo it is speculated that the use of the FlatPack might improve the results when using frozen-thawed boar spermatozoa for artificial insemination.     

Heterogeneity of the gradients performed by the freeze-thaw method

Gradients produced by the freeze-thaw method were analyzed at various rates of freezing. The shape of the gradient depended on the rate of freezing. At high rates the pattern did not change but at low rates the steepness of the gradient increased with time. Solutes concentrated at the bottom in a fashion which depended on the density of the solvent and on the rate of freezing. It should also be noted that the gradient was not uniform over the entire surface as the concentration of solute increased near the wall of the test tube.     

The resolution of the ultrasound pulsed Doppler for blood velocity measurements

Pulsed ultrasound Doppler velocity meters (PUDVM) permit noninvasive blood velocity measurements. The emitted ultrasound beam characteristics primarily determine the resolution of the instrument when recording velocity profiles. The sample volume, the small region over which velocity information data are detected, was found to be > 2·3 mm³ depending on the transducer disk dia., distance in front of the disk, sampling time increment, and pulse length. The shape of the sample volume approximates a cylinder in the near field and a frustrum of a cone in the far field. The end surfaces of the sample volume were affected by the emitted pulse shape. Ultrasonic beam cross-sections were found to be smaller than predicted by theory due to the finite threshold levels of the PUDVM. The variation of the sample volume with range was illustrated by steady laminar flow velocity profile measurements in rigid tubes. The accuracy of velocity measurements was within 5 per cent with slightly larger deviations occurring near the walls due to the finite sample volume.     

Observations on transmembrane structures of surface immunoglobulin in the plasma membrane of B lymphocytes

We have investigated the possible role of intramembraneous particles as revealed by freeze-fracture electron microscopy in the plasma membrane of B lymphocytes from rabbits and mice as reflections of transmembrane structures of surface immunoglobulin receptor molecules. This was achieved by aggregation of the surface receptors using fluorochrome-conjugated antibodies, fixation and freezing of the cells in 35% glycerol. This procedure resulted in replicas of lymphocytes with well-preserved morphology (no ice-crystals), enabling the study of both protoplasmic and external fracture face in combination with surface receptor markers. It appeared that very small intramembraneous particles (3–6 nm diameter) were selectively clustered under patches of surface receptor label. This phenomenon was found on the external fracture face exclusively and not on the protoplasmic fracture face. ‘Classical’ intramembraneous particles (6–12 nm diameter) were not involved. We suggest that these small, clustered particles should be interpreted as transmembrane structures of surface immunoglobulin molecules.     

Influence of chemical and freezing fixation methods in the freeze-fracture of stratum corneum

A comparison between two fixation techniques for freeze-fracture was established. Stratum corneum (SC) samples from pig epidermis were fixed using high-pressure freezing (HPF) and using plunging in propane freezing; the latter after chemical fixation. Then, frozen samples were freeze-fractured, coated with platinum-carbon, and visualized using a high-resolution low-temperature scanning electron microscope and a transmission electron microscope. Our results indicate that the plane of freeze-fracture was different depending on the fixation and freezing methodology used. In the samples frozen by HPF without chemical fixation, the fracture plane laid mainly between the lipid lamellae. However, when chemical fixation and plunging in propane freezing was used, the fracture plane did not show preference to a specific way. Plunging in propane freezing of chemically fixed samples, on the other hand, provides a more homogeneous fracture behaviour. Thus, depending on the methodology used, we can favour a visualization of either lipid or protein domains of the SC. These results could be very useful in future ultrastructural studies in order to facilitate the microscopic visualization and interpretation of the complex images such as those of SC and even of other samples in which different domains coexist.     

A simple cryogenic holder for tensile testing of soft biological tissues

To overcome the difficulty of gripping soft biological materials for tensile test, a simple inexpensive cryogenic holder was developed which allows rapid (3 min) preparation of samples. It is made of 6 parts, built in a bakelite cloth, which is an excellent thermal isolant, and is used with rectangular (8x10(-2)x10(-2)x10(-2)m) samples. The holder with the sample inside is completely immersed in liquid nitrogen for 50 s. This duration allows the freezing of the sample ends on a 10(-2)m length and gives a very flat freezing surface throughout the sample cross section. The 6x10(-2)m central part of the sample remained at ambient temperature. Two parts of the holder help maintain the sample until its ends are vertically gripped in the tensile machine thus avoiding any sample deformation during this step. No pressure was applied on the frozen part of the sample by grips of the tensile machine and this avoids breaks in this region. The sample is fixed by adhesion forces (>1 kN) between its frozen parts and 2 pieces of the holder. The procedure has been successfully tested with bovine and salmon muscle samples and results show tensile breaks randomly distributed in the unfrozen region of the samples. Particular attention has been paid to obtain a very flat freezing surface so that the axial strain is equal throughout the sample and therefore any strain-related mechanical parameters can be accurately determined. The dimensions of the holder can be easily modified to fit other sample geometries and can be used with other biological materials.     

Skin cryopreservation: I. Incorporation of radioactive sulfate as a criterion of pigskin graft viability after freezing to −196 °C in the presence of cryoprotectants

The incorporation of radioactive sulfate into glycosaminoglycans was used as a criterion of pigskin graft viability after surface treatment of the pig hide and after cooling and freezing of the graft. Complete surface treatment of the hide (soap, ethanolic iodine, antibiotics, and saline) diminished the incorporation of sulfate by about 40% compared with the control graft. During cooling and freezing the pigskin graft was submitted to 30-min exposures at 20, 4, ?18, ?50, ?150, and ?196 °C sequentially in a medium containing 0.65% NaCl, 3% sorbitol, and either 15% glycerol or 15% Me₂SO. Cooling to ?18 °C reduced the incorporation of sulfate only in the grafts protected by glycerol. A considerable decrease of incorporation was observed after freezing the graft to ?150 and ?196 °C in both cryoprotective solutions. The inclusion of a hold at ?50 °C was important, especially in the case of the Me₂SO medium when about 30% of ³⁵S radioactivity was recovered in the cryopreserved graft compared with the control sample.     

Freezing characteristics of fresh water fish (Labeo rohita) by liquid nitrogen vapor

The lean fish Labeo rohita was subjected to liquid nitrogen vapor in a batch freezer to determine its freezing characteristics. The moisture content of the fish muscle tissue was about 75%. The initial and average freezing points were found to be − 1.34 and − 5.25 °C, respectively. The fish slab sample showed a decreased rate of temperature change in that region. The suggested cut-off freezing temperature was − 30 °C, corresponding to about 90% of total water frozen. Continued freezing below − 30 °C resulted in negligible freezing of residual liquid water in the sample. The effects of low-density polyethylene (LDPE) bags and aluminum foil on the freezing times and the overall heat transfer coefficients were sufficiently small that the authors recommended thicknesses of up to 0.1 and 0.5 mm for LDPE bags and aluminum foil, respectively. In these cases there was only 5% increase in freezing time compared to unpackaged fish samples.     

低温条件下中国野生拟南芥种群中CBF3与ROS浓度的相关性

活性氧(ROS)是植物光合作用和呼吸作用的副产物, 环境胁迫可加速植物体内ROS的产生, 造成植物细胞膜的过氧化, 同时给光反应中心II带来光伤害。RFOs是植物体内的1类寡聚糖家族, 其对环境胁迫的响应很可能与清除过剩的ROS相关。前期的研究显示, 由于中国长江流域野生拟南芥(Arabidopsis thaliana)种群中CBF3基因的变异, 种群的冰冻耐受性和体内RFOs含量的积累普遍低于Col生态型。研究表明, 长江流域种群中ROS代谢通路在低温处理后的表达与Col生态型相比发生了明显的分化, 并且植物体内ROS的浓度增高; 而将Col生态型中能正常响应环境冷信号的CBF3基因转入长江流域种群后, 转基因植株的冰冻耐受性得到显著提高, 体内RFOs积累亦增加, 而ROS浓度显著降低。这些结果说明, 低温条件下CBF3很可能通过直接调控植物体内RFOs的生物积累来参与调控下游过剩ROS的清除过程。中国长江流域野生拟南芥种群低温条件下体内ROS浓度的升高, 很可能是由于种群中CBF3基因发生了自然变异从而丧失了冷响应能力造成的。     

Successful pregnancies in cows following double freezing of a large volume of semen

The objective of the following paper is to describe a new technology for large volume and double freezing of semen in 12 mL test tubes. Semen from two different bulls was frozen with a new technique using 12 mL test tubes and was refrozen after thawing in mini straws. All freezing was done in a "Multi thermal gradient" (MTG) freezing apparatus, which moves the container at a constant velocity (V) through a thermal gradient (G) producing a controlled cooling rate B = (G) x (V). Each of the two bulls ejaculated were evaluated for post thaw motility in the lab and then in a field trial which was carried out in a split sample mode. We inseminated 105 cows after a double freezing/thawing cycle, and another 123 cows were inseminated with semen frozen in mini-straws and a conventional method. The results showed a 75 +/- 5% post thaw motility after freezing a 12 mL test tube and 50 +/- 5% after a second freezing/thawing in mini-straws, respectively. Controlled vapour freezing showed a 60 +/- 10% post thaw motility. The results of the field trial showed a pregnancy rate of 44% (47/105) for the double freezing group in comparison to 45.5% (56/123) for the controlled group. These results can be beneficial for large volume freezing, and therefore for bull semen cryobanking in a large volume which will be followed by second freezing in a regular insemination volume.     

Comparison of TNC and standard extender on post-thaw quality and in vivo fertility of Thai native chicken sperm

Semen extender has a vital role in preservation of sperm cells properties in terms of sperm viability, motility, acrosome integrity, and mitochondrial membrane potential. The objective of the present study was to evaluate a new extender, known as Thai native chicken (TNC) extender compared to BHSV-based and modified Sasaki extenders for freezing chicken semen. Semen from Thai native roosters was collected, pooled, and randomly divided into three groups. Semen was frozen with a simple freezing method using nitrogen vapor and dimethylformamide. In the first experiment, post-thaw motion parameters, viability, acrosome integrity, mitochondrial function, and lipid peroxidation levels were analyzed using computer-assisted sperm analysis, propidium iodide, fluorescein isothiocyanate-conjugate peanut agglutinin, JC-1, and the thiobarbituric acid reaction. Results showed that the type of extender had no effect on the percentage of total motile and curvilinear velocity. The percentage of progressive motile, straight-line velocity, and average path velocity of post-thawed semen were significantly lower in TNC compared to the modified Sasaki extender. However, the percentages of post-thawed acrosome integrity and active mitochondria were significantly higher in TNC extender (P < 0.05). For the second experiment, semen was thawed by using each of extenders thereafter, was inseminated to 48-layer breeder hens to determine the fertility rate. Among the three extenders used, the highest fertility rate was found in TNC extender. In conclusion, TNC extender can be recommended as an appropriate and useful cryopreservation media for native chicken semen since it maintains the quality of rooster semen and fertility after freezing and thawing process.     

A technique for labelling the sample surface for quick-freeze,deep-etch,rotary replication electron microscopy: application to the study of geletin gel structure

A method using magnesium oxide crystals to label the surface of physical gels, such as gelatin gel before quick-freezing is described and discussed. The quick-freeze, deep-etch, rotary replication technique is most adapted to 3-D visualization of physical gel structure. However, it is known that the depth which ultrarapid freezing may reach is limited by the growth of ice crystals as the distance from the surface of the specimen (rapidly cooled by smashing against a cooled metal plate) increases. Consequently, intact preservation of structures occurs only in superficial zones of the specimen. The MgO surface labelling technique provides a simple means for surface recognition. It enables the estimation of a given replicated area depth, taking into account the angle of specimen scraping before etching and replicating. By comparison of views of the same replica at different depths, freezing artifacts may be recognized even when they cause only slight deformations in the structure. This is particularly necessary for interpretation of gel network geometry: interpretation can be made with certainty only if a reliable surface reference marker exists. For gelatin gels, the depth of best freezing can be estimated to be around 5 μm from the frozen sample surface.     

The effect of roughness on biophysical stimuli at the bone-cartilage interface

Numerical simulations are often used to investigate the effect of mechanical environment on fracture healing. Although these models exhibit biologically relevant mechanical parameters at the bone-callus interface, this interface is modelled as perfectly smooth when in fact it is rough. In this study, a macro-micro-two-scale finite element model was used to determine if roughness significantly alters calculated local mechanical parameters. An idealized fracture healing poroelastic model with a small micro-modelled sub-domain of cartilaginous callus adjacent to rough bone was subjected to cyclic loading. The shear stress, tangential fluid velocity, and pore pressure were investigated. With roughness similar to that at the growth plate, solid matrix shear stress differed substantially with interface roughness, whereas interstitial fluid velocity and pore pressure were only slightly affected. Hence, when modelling local micro-mechanical environments near hard-soft tissue interfaces, interface roughness should be considered.     

The influence of tissue treatment on brain Na+, K+-ATPase activity and its response to vanadate inhibition

This study has compared the effect of freezing in situ and decapitation without freezing on the Na+,K+-ATPase activity in mouse cerebral cortex homogenates under otherwise comparable conditions. The Na+,K+-ATPase activity was substantially influenced by the sample preparation; a twofold value was obtained for frozen samples as compared to that in fresh samples. Not only basal activity, but also the sensitivity of the enzyme towards vanadate inhibition depended on tissue treatment; lesser inhibition was observed in frozen samples. These findings suggest the possible implication of altered enzyme characteristics due to sample preparation while studying the influence of various other factors on enzyme activity.     

低温电镜技术及其在植物（动物）材料研究中的应用

通过一些实例介绍了高压冷冻,冷冻置换和冷冻超薄切片等低温电镜样品制备技术,并且与传统方法对照,说明低温电镜技术的优越性,其中,发菜（Nostoc flagelliforme)营养细胞的冷冻超薄切片（未经化学固定,脱水）所显示的超微结构更客观地反映了生物样品的自然生理状态。此外,应用高压冷冻和冷冻置换的免疫标记电镜技术,首次对发菜营养细胞中的DNA进行定位,明确了核区的位置及范围。