Mechanism of ultraviolet-induced mutagenesis: the coding properties of ultraviolet-irradiated poly(dC) replicated by E. coli DNA polymerase I.

We have identified three lesions rather than cyclobutane dimers which alter the properties of UV-irradiated poly(dC) as a template for E.coli DNA polymerase I, and have characterised these lesions with respect to their coding properties, rates of formation and decay, and their sensitivity to uracil DNA glycosylase. Our results lead us to conclude that these lesions are (1) cytosine hydrates, which code for cytosine and to a lesser extent thymine, (2) uracil hydrates, which code for adenine and are not sensitive to uracil DNA glycosylase, and (3) uracils, which code for adenine and are removed by uracil DNA glycosylase.     

Mechanism of replication of ultraviolet-irradiated single-stranded DNA by DNA polymerase III holoenzyme of Escherichia coli. Implications for SOS mutagenesis

Replication of UV-irradiated oligodeoxynucleotide-primed single-stranded phi X174 DNA with Escherichia coli DNA polymerase III holoenzyme in the presence of single-stranded DNA-binding protein was investigated. The extent of initiation of replication on the primed single-stranded DNA was not altered by the presence of UV-induced lesions in the DNA. The elongation step exhibited similar kinetics when either unirradiated or UV-irradiated templates were used. Inhibition of the 3'----5' proofreading exonucleolytic activity of the polymerase by dGMP or by a mutD mutation did not increase bypass of pyrimidine photodimers, and neither did purified RecA protein influence the extent of photodimer bypass as judged by the fraction of full length DNA synthesized. Single-stranded DNA-binding protein stimulated bypass since in its absence the fraction of full length DNA decreased 5-fold. Termination of replication at putative pyrimidine dimers involved dissociation of the polymerase from the DNA, which could then reinitiate replication at other available primer templates. Based on these observations a model for SOS-induced UV mutagenesis is proposed.     

A study on the unprimed poly (dA-dT) synthesis catalyzed by preparations of E. coli DNA polymerase I.

Evidence was obtained indicating that the initiation of poly (dA-dT) de novo synthesis is provided by deoxynucleoside diphosphate: oligonucleotide deoxynucleotidyl transferase (dNDP-transferase present in preparations of E. coli DNA polymerase I and capable of catalyzing the unprimed polymerization of dNDP. dNDP-transferase synthesyzes short oligonucleotides which form template-primer complexes repeatedly replicated by DNA polymerase I. This conclusion was based on the following observations: the abolition of the lag period of poly (dA-dT) synthesis by preincubation of DNA-polymerase I preparations with dADP and dTDP; the presence of oligo (dA-dT) among the preincubation products; the suppressive effect of dithiothreitol and N-ethylmaleimide (inhibitors of dNDP-transferase) on the de novo, but not on the primed synthesis of poly (dA-dT), catalyzed by preparations of DNA-polymerase I.     

Mechanism for N-acetyl-2-aminofluorene-induced frameshift mutagenesis by Escherichia coli DNA polymerase I (Klenow fragment)

N-Acetyl-2-aminofluorene (AAF) is a chemical carcinogen that reacts with guanines at the C8 position in DNA to form a structure that interferes with DNA replication. In bacteria, the NarI restriction enzyme recognition sequence (G1G2CG3CC) is a very strong mutational hot spot when an AAF adduct is positioned at G3 of this sequence, causing predominantly a -2 frameshift GC dinucleotide deletion mutation. In this study, templates were constructed that contained an AAF adduct at this position, and primers of different lengths were prepared such that the primer ended one nucleotide before or opposite or one nucleotide after the adduct site. Primer extension and gel shift binding assays were used to study the mechanism of bypass by the Escherichia coli DNA polymerase I (Klenow fragment) in the presence of these templates. Primer extension in the presence of all four dNTPs produced a fully extended product using the unmodified template, while with the AAF-modified template synthesis initially stalled at the adduct site and subsequent synthesis resulted in a product that contained the GC dinucleotide deletion. Extension product and gel shift binding analyses were consistent with the formation of a two-nucleotide bulge structure upstream of the active site of the polymerase after a nucleotide is incorporated across from the adduct. These data support a model in which the AAF adduct in the NarI sequence specifically induces a structure upstream of the polymerase active site that leads to the GC frameshift mutation and that it is this structure that allows synthesis past the adduct to occur.     

Inhibition of E. coli DNA polymerase I by 1,10-phenanthroline.

A 1,10-phenanthroline-cuprous ion complex is a potent reversible inhibitor of $\text{E. coli}$ DNA polymerase I yielding 50% inhibition in the micromolar concentration range. The 2:1 1,10-phenanthroline-cuprous ion complex is most probably the inhibitory species. Complexes of cupric ion and 1,10-phenanthroline have no apparent kinetic effect. The previously reported inhibition of the enzyme by 1,10-phenanthroline (1,2) is most likely due to the formation of this complex from thiols normally added to the assay mixtures and trace amounts of cupric ion invariably present notwithstanding reasonable precaution. The reversible and instantaneous 1,10-phenanthroline inhibition observed for other polymerases may be due to this unique inhibitory species and not coordination of a catalytically important zinc ion at the active site by the chelating agent.     

Poly(dG-dC) in the Z-form inhibits E. coli DNA polymerase I and AMV DNA polymerase activity

The effect of Z-conformation of DNA on its template activity in DNA synthesis reactions in vitro has been studied. Normal poly(dG-dC) in the B-form, brominated and unbrominated in the Z-form have been compared for their template activity in DNA synthesis reactions mediated by AMV DNA polymerase and E. coli DNA polymerase I. The results indicate that poly(dG-dC) in the Z-form is totally inactive as a template for DNA synthesis and further that it is a strong competitive inhibitor of copying of the B-form DNA.     

Synthesis of novel poly(dG)-poly(dG)-poly(dC) triplex structure by Klenow exo- fragment of DNA polymerase I

The extension of the G-strand of long (700 bp) poly(dG)–poly(dC) by the Klenow exo⁻ fragment of DNA polymerase I yields a complete triplex structure of the H-DNA type. High-performance liquid chromatography analysis demonstrates that the length of the G-strand is doubled during the polymerase synthesis. Fluorescence resonance energy transfer analysis shows that the 5′ ends of the G- and the C-strands, labeled with fluorescein and TAMRA, respectively, are positioned close to each other in the product of the synthesis. Atomic force microscopy morphology imaging shows that the synthesized structures lack single-stranded fragments and have approximately the same length as the parent 700 bp poly(dG)–poly(dC). CD spectrum of the polymer has a large negative peak at 278 nm, which is characteristic of the poly(dG)–poly(dG)–poly(dC) triplex. The polymer is resistant to DNase and interacts much more weakly with ethidium bromide as compared with the double-stranded DNA.     

In vivo mutagenesis by Escherichia coli DNA polymerase I. Ile(709) in motif A functions in base selection

The fidelity of DNA replication by Escherichia coli DNA polymerase I (pol I) was assessed in vivo using a reporter plasmid bearing a ColE1-type origin and an ochre codon in the beta-lactamase gene. We screened 53 single mutants within the region Val(700)-Arg(712) in the polymerase active-site motif A. Only replacement of Ile(709) yielded mutator polymerases, with substitution of Met, Asn, Phe, or Ala increasing the beta-lactamase reversion frequency 5-23-fold. Steady-state kinetic analysis of the I709F polymerase revealed reductions in apparent K(m) values for both insertion of non-complementary nucleotides and extension of mispaired primer termini. Abolishment of the 3'-5' exonuclease activity of wild-type pol I increased mutation frequency 4-fold, whereas the combination of I709F and lack of the 3'-5' exonuclease yielded a 400-fold increase. We conclude that accurate discrimination of the incoming nucleotide at the polymerase domain is more critical than exonucleolytic proofreading for the fidelity of pol I in vivo. Surprisingly, the I709F polymerase enhanced mutagenesis in chromosomal DNA, although the increase was 10-fold less than in plasmid DNA. Our findings indicate the feasibility of obtaining desired mutations by replicating a target gene at a specific locus in a plasmid under continuous selection pressure.     

In vitro synthesis of uniform poly(dG)-poly(dC) by Klenow exo- fragment of polymerase I

In this paper, we describe a production procedure of the one-to-one double helical complex of poly(dG)–poly(dC), characterized by a well-defined length (up to 10 kb) and narrow size distribution of molecules. Direct evidence of strands slippage during poly(dG)–poly(dC) synthesis by Klenow exo⁻ fragment of polymerase I is obtained by fluorescence resonance energy transfer (FRET). We show that the polymer extension results in an increase in the separation distance between fluorescent dyes attached to 5′ ends of the strands in time and, as a result, losing communication between the dyes via FRET. Analysis of the products of the early steps of the synthesis by high-performance liquid chromatography and mass spectroscopy suggest that only one nucleotide is added to each of the strand composing poly(dG)–poly(dC) in the elementary step of the polymer extension. We show that proper pairing of a base at the 3′ end of the primer strand with a base in sequence of the template strand is required for initiation of the synthesis. If the 3′ end nucleotide in either poly(dG) or poly(dC) strand is substituted for A, the polymer does not grow. Introduction of the T-nucleotide into the complementary strand to permit pairing with A-nucleotide results in the restoration of the synthesis. The data reported here correspond with a slippage model of replication, which includes the formation of loops on the 3′ ends of both strands composing poly(dG)–poly(dC) and their migration over long-molecular distances (μm) to 5′ ends of the strands.     

DNA complementary to rabbit globin mRNA made by E. coli polymerase I

Incubation of liver microsomes with cytochrome $\text{b}{}_5$, purified after solubilization with detergents, caused an effective incorporation of the cytochrome into the microsomal membranes. The incorporated cytochrome was reducible by NADH and could not be removed by repeated washing with 0.3 M KCl or 10 mM EDTA. The incorporation was much more efficient at 37°C than at 0°C. Trypsin-solubilized cytochrome $\text{b}{}_5$, which lacks the hydrophobic tail of the native protein, could not be inserted into the membranes. These findings confirm the view that the hydrophobic tail of the cytochrome molecule is responsible for its tight binding to the microsomal membranes.     

Nucleotide excision by E. coli DNA polymerase I in proofreading and non-proofreading modes

Escherichia coli DNA polymerase I exists in at least two distinct kinetic forms. When it binds to a template, the proofreading activity is usually switched off. As the enzyme progresses along the template, it becomes more and more competent for excision. This phenomenon introduces a link between fidelity and processivity. Processivity is best studied when the chain-length distributions of synthesized polymers are stationary. Even then, however, one cannot avoid multiple initiations on a given template by the same molecule of the enzyme. When synthesis is initiated with primers of lengths 15 or 20, a strange phenomenon is observed. It seems that the polymerase starts by hydrolyzing the primer down to a length of 7-10 nucleotides and only then starts to add nucleotides. It does so in a low-accuracy mode, suggesting that, while the exonuclease is clearly active, it does not contribute to proofreading. The warm-up of the proofreading function is therefore reinterpreted as a switch between two modes of behaviour: a mode 1 of low accuracy in which the 3'----5' exonuclease, while active, is uncoupled from the polymerase and does not contribute to proofreading, and a mode 2 of high accuracy in which the exonuclease is kinetically linked to the polymerase activity.     

The dinB gene encodes a novel E. coli DNA polymerase, DNA pol IV, involved in mutagenesis.

In Escherichia coli, the dinB gene is required for the SOS-induced lambda untargeted mutagenesis pathway and confers a mutator phenotype to the cell when the gene product is overexpressed. Here, we report that the purified DinB protein is a DNA polymerase. This novel E. coli DNA polymerase (pol IV) is shown to be strictly distributive, devoid of proofreading activity, and prone to elongate bulged (misaligned) primer/template structures. Site-directed mutagenesis experiments of dinB also demonstrate that the polymerase activity of DinB is required for its in vivo mutagenicity. Along with the sequence homologies previously found within the UmuC-like protein family, these results indicate that the uncovered DNA polymerase activity may be a common feature of all these homologous proteins.     

Partial purification and characterization of poly(dC)-dependent DNA polymerase and its stimulating factor

Poly(dC)-dependent dGMP incorporating activity without a primer molecule and its stimulating factor were partially purified by successive column chromatographies. Polymerase activity that was highly dependent on the stimulating factor was separated from similar activity that was not stimulated by this factor by native DNA-cellulose column chromatography. The factor stimulating activity was strictly dependent on dGTP as substrate and incorporated dGMP into the 3′-OH terminus of poly(dC). However, no terminal deoxynucleotidyl transferase (EC 2.7.7.31) activity was detected in the preparation. The activity also responded to heat-denatured calf thymus DNA and poly(dT) as template, although to a lesser extent. The activity was inhibited by dideoxyGTP and N-ethylmaleimide, and was decreased significantly by aphidicolin and β-lapachon.     

Uracil in deoxyribonucleotide polymers reduces their template-primer activity for E. coli DNA polymerase I.

The physical and biochemical properties of two pairs of synthetic DNA template-primers were investigated. The copolymer poly(dA-dU) . poly(dA-dU) and the homopolymer duplex poly(dA). poly(dU) were characterized by a lower Tm and by a higher buoyant density value than the respective thymine polynucleotides poly(dA-dT) . poly(dA-dT) and poly(dA) . poly(dT). The polymerizing and the primer terminus adding reactions of a homogenous E. coli DNA polymerase I preparation, as measured by incorporation of [3H]dAMP into the acid-insoluble fraction, were significantly poorer with uracil-containing template-primers than with thymine templates. Moreover, the uracil-containing polynucleotides inhibited the polymerizing activity of DNA polymerase I to a greater extent than the thymine polynucleotides, when the enzymatic activity was investigated with a dATP/dTTP/dUTP-free incorporation system making use of poly(dI-dC) . poly(dI-dC) as the template-primer.