Structure and properties of silk hydrogels

Control of silk fibroin concentration in aqueous solutions via osmotic stress was studied to assess relationships to gel formation and structural, morphological, and functional (mechanical) changes associated with this process. Environmental factors potentially important in the in vivo processing of aqueous silk fibroin were also studied to determine their contributions to this process. Gelation of silk fibroin aqueous solutions was affected by temperature, Ca(2+), pH, and poly(ethylene oxide) (PEO). Gelation time decreased with increase in protein concentration, decrease in pH, increase in temperature, addition of Ca(2+), and addition of PEO. No change of gelation time was observed with the addition of K(+). Upon gelation, a random coil structure of the silk fibroin was transformed into a beta-sheet structure. Hydrogels with fibroin concentrations >4 wt % exhibited network and spongelike structures on the basis of scanning electron microscopy. Pore sizes of the freeze-dried hydrogels were smaller as the silk fibroin concentration or gelation temperature was increased. Freeze-dried hydrogels formed in the presence of Ca(2+) exhibited larger pores as the concentration of this ion was increased. Mechanical compressive strength and modulus of the hydrogels increased with increase in protein concentration and gelation temperature. The results of these studies provide insight into the sol-gel transitions that silk fibroin undergoes in glands during aqueous processing while also providing important insight in the in vitro processing of these proteins into useful new materials.     

Photopolymerized thermosensitive hydrogels: synthesis, degradation, and cytocompatibility

In situ forming hydrogels based on thermosensitive polymers have attractive properties for tissue engineering. However, the physical interactions in these hydrogels are not strong enough to yield gels with sufficient stability for many of the proposed applications. In this study, additional covalent cross-links were introduced by photopolymerization to improve the mechanical properties and the stability of thermosensitive hydrogels. Methacrylate groups were coupled to the side chains of triblock copolymers (ABA) with thermosensitive poly( N-(2-hydroxypropyl) methacrylamide lactate) A blocks and a hydrophilic poly(ethylene glycol) B block. These polymers exhibit lower critical solution temperature (LCST) behavior in aqueous solution and the cloud point decreased with increasing amounts of methacrylate groups. These methacrylate groups were photopolymerized above the LCST to render covalent cross-links within the hydrophobic domains. The mechanical properties of photopolymerized hydrogels were substantially improved and their stability was prolonged significantly compared to nonphotopolymerized hydrogels. Whereas non-UV-cured gels disintegrated within 2 days at physiological pH and temperature, the photopolymerized gels degraded in 10 to 25 days depending on the degree of cross-linking. To assess biocompatibility, goat mesenchymal stem cells were seeded on the hydrogel surface or encapsulated within the gel and they remained viable as demonstrated by a LIVE/DEAD cell viability/cytotoxicity assay. Expression of alkaline phosphatase and production of collagen I demonstrated the functionality of the mesenchymal stem cells and their ability to differentiate upon encapsulation. Due to the improved mechanical properties, stability, and adequate cytocompatibility, the photopolymerized thermosensitive hydrogels can be regarded as highly potential materials for applications in tissue engineering.     

New materials from proteins and peptides

In this review we highlight recent accomplishments in the design of materials from proteins and peptides. Examples include hydrogels made from aggregating designed β-hairpin peptides, whose physical properties respond to small changes in the amino acid composition of the peptide; materials that combine different segments of natural elastomeric proteins - such as elastin, resilin, silk fibroin whose bulk properties are dictated in unanticipated ways by their composition; and hydrogels formed by strings or arrays of protein modules, which are cross-linked by multivalent versions of their peptide ligands, and which may exhibit exquisite stimuli-responsive behavior. The suitability of the unique properties of such new materials for practical applications is also considered.     

N-Terminal domain of Bombyx mori fibroin mediates the assembly of silk in response to pH decrease

Fibroins serve as the major building blocks of silk fiber. As the major component of fibroin, the fibroin heavy chain is a considerably large protein comprising N-terminal and C-terminal hydrophilic domains and 12 highly repetitive Gly-Ala-rich regions flanked by internal hydrophilic blocks. Here, we show the crystal structure of the fibroin N-terminal domain (FibNT) at pH?4.7, revealing a remarkable double-layered anti-parallel β-sheet with each layer comprising two FibNT molecules entangled together. We also show that FibNT undergoes a pH-responsive conformational transition from random coil to β-sheets at around pH?6.0. Dynamic light scattering demonstrates that FibNT tends to oligomerize as pH decreases to 6.0, and electron microscopy reveals micelle-like oligomers. Our results are consistent with the micelle assembly model of silk fibroin and, more importantly, show that the N-terminal domain in itself has the capacity to form micelle-like structures in response to pH decrease. Structural and mutagenesis analyses further reveal the important role of conserved acidic residues clustered in FibNT, such as Glu56 and Asp100, in preventing premature β-sheet formation at neutral pH. Collectively, we suggest that FibNT functions as a pH-responsive self-assembly module that could prevent premature β-sheet formation at neutral pH yet could initiate fibroin assembly as pH decreases along the lumen of the posterior silk gland to the anterior silk gland.     

丝素蛋白膜固定β-葡萄糖苷酶及其改良食品风味的研究

从黑曲霉发酵液中提取β-葡萄糖苷酶酶液,用丝素蛋白将其固定,探讨酶固定化的影响因素及固定化酶的性质。β-葡萄糖苷酶的固定化条件为:取0.8 Uβ-葡萄糖苷酶与4.0%戊二醛和10%牛血清白蛋白混合(体积比为5:3:2),涂布于1cm2丝素蛋白膜上交联作用8h。在此条件下获得的固定化酶性质为:最适温度为60℃,比游离酶提高10℃;最适pH为5.0;t1/2为75℃,热稳定性比游离酶有明显改善;最佳反应时间为15 min;与游离酶相比,与底物亲和力降低。将固定化酶膜应用于果汁、果酒、茶汁等食品的增香,经感官鉴评,样品间存在显著差异,进一步经色谱一质谱联用仪分析,发现酶解后的样品,原有香气物质有不同程度的增加,4-萜品醇增加了107%、紫苏醇增加了42%,还有三种未知的香气组分分别增加了251%、79%和33%;并有新风味物质——芳樟醇、香叶醇和2-羟基-5-甲基苯乙酮产生,显示了较好增香效果。     

Cross-linking of wheat starch and hydroxypropylated wheat starch in alkaline slurry with sodium trimetaphosphate

Wheat starch was cross-linked at 40 °C and pH 11.0 by slurrying the starch (30% solids) in a solution of sodium trimetaphosphate (STMP), sodium hydroxide, and sodium sulfate. The extent of cross-linking was determined by an increase in alkaline fluidity or by a decrease in alkaline clarity. Response surface analysis showed that cross-linking increased with increasing levels of STMP (0.5-1.5%, based on starch, bos) and sodium sulfate (0–4.0%, bos) over a reaction period of 120–720 min. A regression equation with first and second order terms showed that STMP and sodium sulfate concentrations and the reaction time accounted for 99% of the variability in alkaline fluidity. Wheat starch (37% slurry) was hydroxypropylated by reaction with propylene oxide (8%, bos) for 24h at 45 °C in alkali (pH 11.5) containing 16.0% sodium sulfate (bos). The hydroxypropylated (4.5wt%) wheat starch (DS 0.12-0.13) was not isolated but was cross-linked with STMP (0.1-0.5%, bos) over a 10–40 min reaction period. A comparison of pasting curves at pH 3.5 showed that some of the cross-links produced by STMP were less stable than those produced by phosphoryl chloride, indicating a low level of pyrophosphate as well as monophosphate cross-links. The less stable cross-links were diminished by changing reaction conditions with STMP.     

Hydrothermal production and characterization of protein and amino acids from silk waste

Non-catalytic hydrothermal decomposition of sericin and fibroin from silk waste into useful protein and amino acids was examined in a closed batch reactor at various temperatures, reaction times, and silk to water ratios to examine their effects on protein and amino acid yields. For the decomposition of sericin, the highest protein yield was found to be 0.466 mg protein/mg raw silk, obtained after 10 min hydrothermal reaction of silk waste at 1:100 silk to water ratio at 120 degrees C. The highest amino acid yield was found to be 0.203 mg amino acids/mg raw silk, obtained after 60 min of hydrothermal reaction of silk waste at 1:20 silk to water ratio at 160 degrees C. For the hydrothermal decomposition of fibroin, the highest protein yield was 0.455 mg protein/mg silk fibroin (1:100, 220 degrees C, 10 min) and that of amino acids was 0.755 mg amino acids/mg silk fibroin (1:50, 220 degrees C, 60 min). The rate of silk fibroin decomposition could be described by surface reaction kinetics. The soluble reaction products were freeze-dried to obtain sericin and fibroin particles, whose conformation and crystal structure of the particles were shown to differ from the original silk materials, particularly in the case of fibroin, in which the change from beta-sheet conformation to alpha-helix/random coil was observed.     

pH-sensitive cationic guar gum/poly (acrylic acid) polyelectrolyte hydrogels: Swelling and in vitro drug release

Novel polyelectrolyte hydrogels (coded as GA) based on cationic guar gum (CGG) and acrylic acid monomer by photoinitiated free-radical polymerization were synthesized with various feed compositions. Fourier transform infrared spectra (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) confirmed that the formation of the polyelectrolyte hydrogels was attributed to the strong electrostatic interaction between cationic groups in CGG and anionic groups in poly (acrylic acid) (PAA). Swelling experiments provided important information on drug diffusion properties, which indicated the GA hydrogels were highly sensitive to pH environments. Potential applications of the hydrogels matrices in controlled drug delivery were also examined. The ketoprofen-loaded CGG/PAA matrices were prepared by hydrogels and directly compressed tablets, respectively. Release behavior of ketoprofen relied on the preparative methods of matrices, ratios of CGG/AA and pH environments. The release mechanism was studied by fitting experimental data to a model equation and calculating the corresponding parameters. The result showed that the kinetics of drug release from the hydrogels in pH 7.4 buffer solution was mainly non-Fickian diffusion. However, for tablets, the drug release in pH 7.4 buffer solution was mainly affected by polymer erosion. The pH of the dissolution medium appeared to have a strong effect on the drug transport mechanism. At more basic pH values, Case II transport was observed, indicating a drug release mechanism highly influenced by macromolecular chain relaxation. The ketoprofen release is also tested in the conditions chosen to simulate gastrointestinal tract conditions. The results implied that the GA hydrogels can be exploited as potential carriers for colon-specific drug delivery.     

Rheological properties of cysteine-containing elastin-like polypeptide solutions and hydrogels

The rheological properties of cysteine-containing elastin-like polypeptide (Cys-ELP) solutions and Cys-ELP hydrogels are reported. The Cys-ELP solutions exhibit a surprisingly high apparent viscosity at low shear rate. The high viscosity is attributed to the formation of an interfacial cross-linked "skin" at the sample surface, rather than the bulk of the Cys-ELP solution. At higher shear rate, the interfacial cross-linked film breaks, and its influence on the viscosity of the Cys-ELP solution can be ignored. Cys-ELP hydrogels are formed by mixing Cys-ELP and hydrogen peroxide (H(2)O(2)). At fixed concentration of Cys-ELP, the gelation time can be tuned by the concentration of H(2)O(2). Cys-ELP hydrogels have the typical characteristics of covalent cross-linked networks, as the storage moduli are larger than the loss moduli and are independent of frequency in dynamic oscillatory frequency sweep experiments. The plateau moduli obtained from linear frequency sweep experiments are much lower than those estimated from the number of thiol groups along the Cys-ELP chain, indicating that only a small fraction of thiols form elastically active cross-links. From the small value of the fraction of elastically active cross-links, the Cys-ELP hydrogel is concluded to be an inhomogenous network. Under steady shear, a 2.5 wt % Cys-ELP hydrogel shear thickens at shear rates lower than that necessary for fracture.     

Surface Modification and Characterisation of Silk Fibroin Fabric Produced by the Layer-by-Layer Self-Assembly of Multilayer Alginate/Regenerated Silk Fibroin

Silk-based medical products have a long history of use as a material for surgical sutures because of their desirable mechanical properties. However, silk fibroin fabric has been reported to be haemolytic when in direct contact with blood. The layer-by-layer self-assembly technique provides a method for surface modification to improve the biocompatibility of silk fibroin fabrics. Regenerated silk fibroin and alginate, which have excellent biocompatibility and low immunogenicity, are outstanding candidates for polyelectrolyte deposition. In this study, silk fabric was degummed and positively charged to create a silk fibroin fabric that could undergo self-assembly. The multilayer self-assembly of the silk fibroin fabric was achieved by alternating the polyelectrolyte deposition of a negatively charged alginate solution (pH = 8) and a positively charged regenerated silk fibroin solution (pH = 2). Finally, the negatively charged regenerated silk fibroin solution (pH = 8) was used to assemble the outermost layer of the fabric so that the surface would be negatively charged. A stable structural transition was induced using 75% ethanol. The thickness and morphology were characterised using atomic force microscopy. The properties of the self-assembled silk fibroin fabric, such as the bursting strength, thermal stability and flushing stability, indicated that the fabric was stable. In addition, the cytocompatibility and haemocompatibility of the self-assembled silk fibroin fabrics were evaluated. The results indicated that the biocompatibility of the self-assembled multilayers was acceptable and that it improved markedly. In particular, after the self-assembly, the fabric was able to prevent platelet adhesion. Furthermore, other non-haemolytic biomaterials can be created through self-assembly of more than 1.5 bilayers, and we propose that self-assembled silk fibroin fabric may be an attractive candidate for anticoagulation applications and for promoting endothelial cell adhesion for vascular prostheses.     

Preparation and properties of a pH/temperature-responsive carboxymethyl chitosan/poly(N-isopropylacrylamide)semi-IPN hydrogel for oral delivery of drugs

Thermo- and pH-responsive semi-IPN polyampholyte hydrogels were prepared by using carboxymethylchitosan and poly(N-isopropylacrylamide) with N,N'-methylenebisacrylamide (BIS) as the crosslinking agent. The swelling characteristics of these hydrogels at distinct compositions as a function of pH and temperature were investigated. It was found that the semi-IPN hydrogels demonstrated the pH- and temperature-responsive nature of the materials, and it also showed good reversibility. The study on the release of coenzyme A (CoA) showed that within 24h the cumulative release ratio of CoA was 22.6% in pH 2.1 solution and 89.1% in pH 7.4 solution at 37 degrees C, respectively. The release rate of CoA was higher at 37 degrees C than 25 degrees C in a pH 7.4 buffer solution. An increased release rate of CoA was observed with the content of carboxymethylchitosan increasing in the hydrogel at 25 degrees C in pH 7.4 solution. These results show that semi-IPN hydrogel seems to be of great promise in pH-temperature oral drug delivery systems.     

Natural electroactive hydrogel from soy protein isolation

A natural electroactive protein hydrogel was prepared from soy protein isolate (SPI) solution by cross-linking with epichlorohydrin. Under electrical stimulus, such SPI hydrogel quickly bends toward one electrode, showing a good electroactivity. Because of its amphoteric nature, the SPI hydrogel bends either toward the anode (pH < 6) or cathode (pH > 6), depending on the pH of the electrolyte solution. Other factors, such as electric field strength, ionic strength and gel thickness also influence the electromechanical behavior of the SPI hydrogels. Moreover, this SPI hydrogel exhibits a good electroactive behavior under strong acidic (pH = 2 - 3) or basic (pH = 11 - 12) solutions, which is a significant improvement over two other kinds of natural electroactive hydrogels, i.e., chitosan/carboxymethylcellulose and chitosan/carboxymethylchitosan hydrogel, which we reported previously. The wide pH range and good electroactivity of this natural protein hydrogel suggests its great potential for microsensor and actuator applications, especially in the biomedical field, and also to increase the scope of natural polymer-based electroactive hydrogels.     

Carbon dioxide induced silk protein gelation for biomedical applications

We present a novel method to fabricate silk fibroin hydrogels using high pressure carbon dioxide (CO(2)) as a volatile acid without the need for chemical cross-linking agents or surfactants. The simple and efficient recovery of CO(2) post processing results in a remarkably clean production method offering tremendous benefit toward materials processing for biomedical applications. Further, with this novel technique we reveal that silk protein gelation can be considerably expedited under high pressure CO(2) with the formation of extensive β-sheet structures and stable hydrogels at processing times less than 2 h. We report a significant influence of the high pressure CO(2) processing environment on silk hydrogel physical properties such as porosity, sample homogeneity, swelling behavior and compressive properties. Microstructural analysis revealed improved porosity and homogeneous composition among high pressure CO(2) specimens in comparison to the less porous and heterogeneous structures of the citric acid control gels. The swelling ratios of silk hydrogels prepared under high pressure CO(2) were significantly reduced compared to the citric acid control gels, which we attribute to enhanced physical cross-linking. Mechanical properties were found to increase significantly for the silk hydrogels prepared under high pressure CO(2), with a 2- and 3-fold increase in the compressive modulus of the 2 and 4 wt % silk hydrogels over the control gels, respectively. We adopted a semiempirical theoretical model to elucidate the mechanism of silk protein gelation demonstrated here. Mechanistically, the rate of silk protein gelation is believed to be a function of the kinetics of solution acidification from absorbed CO(2) and potentially accelerated by high pressure effects. The attractive features of the method described here include the acceleration of stable silk hydrogel formation, free of residual mineral acids or chemical cross-linkers, reducing processing complexity, and avoiding adverse biological responses, while providing direct manipulation of hydrogel physical properties for tailoring toward specific biomedical applications.     

Swelling and mechanical properties of biopolymer hydrogels containing chitosan and bovine serum albumin

Experimental and theoretical investigations of the swelling and mechanical properties of hydrogels formed from chitosan, bovine serum albumin (BSA), and chitosan/BSA mixtures cross-linked with genipin were performed. The properties of cross-linked chitosan hydrogels were explained in terms of its polyelectrolyte behavior, which led to a gradual increase in swelling ratio below the pK value, but whereby its swelling ability was eliminated by the presence of salt that screened the charges. Comparison of theoretical and experimental calculations of the swelling ratio, however, indicated that complications arising from wastage of cross-links, and formation of polymerized genipin cross-links must be considered before quantitative prediction can be achieved. Cross-linked BSA hydrogels swelled even in the presence of salt, and a marked increase in swelling was observed below pH = 3 that was explained as the result of an acid induced denaturation of the protein that led to unfolding of the molecule. Swollen BSA hydrogels were mechanically weak, however. Composite gels made from a cross-linked mixture of chitosan and BSA exhibited the swelling behavior of BSA combined with the mechanical properties of chitosan and were therefore considered most suitable for use in a gastric environment.     

Study of the near-neutral pH-sensitivity of chitosan/gelatin hydrogels by turbidimetry and microcantilever deflection

The fundamental properties and pH-sensitivity of chitosan/gelating hydrogels were investigated using spectroscopic and microelectro mechanical (MEMS) measurement approaches. Turbidimetric titration revealed that there were electrostatic attractive interactions between tripolyphosphate (TPP), chitosan, and gelatin in the acidic pH range, depending on their degree of ionization. The pH-sensitive swelling behavior of the hydrogels was investigated by monitoring the deflection of hydrogel-coated microcantilevers, which exhibited a sensitive and repeatable response to solution pH. The deflection of the microcantilever increased as the pH decreased, and the response speed of the system exhibited a nearly linear relationship with pH. The effects of the pH and concentration of TPP solution, as well as the ratio of chitosan to gelatin in gel precursor solutions, on the pH sensitivity of the hydrogels were also investigated. It was found that the swelling of the hydrogel is mainly a result of chain relaxation of chitosan-TPP complexes caused by protonation of free amino groups in chitosan, which depends on the crosslinking density set during the formation of the network. An increase in initial crosslink density induced a decrease in swelling and pH sensitivity. It can be concluded from this study that pH-sensitive chitosan gel properties can be tuned by preparatory conditions and inclusion of gelatin. Furthermore, microcantilevers can be used as a platform for gaining increased understanding of environmentally sensitive polymers.     

Injectable in situ forming biodegradable chitosan-hyaluronic acid based hydrogels for adipose tissue regeneration

An injectable, biodegradable and glucose-responsive hydrogel derived from natural polysaccharide derivatives was synthesized to deliver adipogenic factor of insulin in vitro for adipose tissue engineering. The biodegradable hydrogel based N-succinyl-chitosan (SCS) and aldehyde hyaluronic acid (AHA) with covalently conjugated glucose oxidase and catalase. The gelation is attributed to the Schiff-base reaction between amino and aldehyde groups of SCS and AHA, respectively. The morphologies and compressive modulus of the freeze-dried hydrogels demonstrated that the incorporated insulin and enzymes results in the formation of a tighter network structure in composite hydrogels. The immobilized enzymes triggered conversion of glucose reduces the pH value of the microenvironment, and results in hydrolysis and increasing swelling of the network basing on Schiff-base cross-linking. The pH inside the hydrogel, kept in PBS solution at pH 7.4 and 37oC, linearly dropped from 7.40 to 7.17 during 4 h of initial period, then slowly increased to 7.36 after 24 h. Correspondingly, the swelling ratio increased from 20.8 to 28.6 at 37oC in PBS with 500 mg/dL glucose. In PBS buffer with 500mg/dL glucose, about 10.8 % of insulin was seen to be released from the hydrogel after 8 h of incubation. The results demonstrated that the adipogenic factor of insulin would be released from this biodegradable hydrogel device into the local microenvironment in a controlled fashion by the swelling of hydrogel network. These preliminary studies indicate that the biodegradable and glucose-responsive hydrogel may have potential uses in adipose tissue engineering applications.     

Injectable in situ forming biodegradable chitosan-hyaluronic acid based hydrogels for adipose tissue regeneration

An injectable, biodegradable and glucose-responsive hydrogel derived from natural polysaccharide derivatives was synthesized to deliver adipogenic factor of insulin in vitro for adipose tissue engineering. The biodegradable hydrogel based N-succinyl-chitosan (SCS) and aldehyde hyaluronic acid (AHA) with covalently conjugated glucose oxidase and catalase. The gelation is attributed to the Schiff-base reaction between amino and aldehyde groups of SCS and AHA, respectively. The morphologies and compressive modulus of the freeze-dried hydrogels demonstrated that the incorporated insulin and enzymes results in the formation of a tighter network structure in composite hydrogels. The immobilized enzymes triggered conversion of glucose reduces the pH value of the microenvironment, and results in hydrolysis and increasing swelling of the network basing on Schiff-base cross-linking. The pH inside the hydrogel, kept in PBS solution at pH 7.4 and 37°C, linearly dropped from 7.40 to 7.17 during 4 h of initial period, then slowly increased to 7.36 after 24 h. Correspondingly, the swelling ratio increased from 20.8 to 28.6 at 37°C in PBS with 500 mg/dL glucose. In PBS buffer with 500 mg/dL glucose, about 10.8% of insulin was released from the hydrogel after 8 h of incubation while upon observation. The results demonstrated that the adipogenic factor of insulin would be released from this biodegradable hydrogel device into the local microenvironment in a controlled fashion by the swelling of hydrogel network. These preliminary studies indicate that the biodegradable and glucose-responsive hydrogel may have potential uses in adipose tissue engineering applications.     

Enzymatic grafting of chitosan onto Bombyx mori silk fibroin: kinetic and IR vibrational studies

The potential for using tyrosinase to graft the polysaccharide chitosan (Ch) onto Bombyx mori silk fibroin (SF) was examined. FT-IR spectroscopy coupled to HPLC amino acid analysis showed that mushroom tyrosinase (MT) catalyses the oxidation of tyrosine (Tyr) of SF to electrophilic o-quinones. Kinetic studies showed that only a fraction of the Tyr residues available on the SF chain were oxidized. This result was interpreted in the light of the structure assumed by SF in aqueous solution: Tyr aromatic side chain groups buried into the folded hydrophobic portions of the chain were probably less accessible to MT for steric reasons. Using slightly acidic conditions (pH 6), it was possible to modify SF under homogeneous conditions. FT-IR spectroscopy provided evidence that Ch was grafted onto MT-oxidized SF: the o-quinones were found to undergo a subsequent non-enzymatic reaction with nucleophilic amino groups of Ch via Schiff-base and Michael addition mechanisms. Various factors, i.e. reaction time, pH, MT/SF ratio, were found to influence the grafting yield. The highest grafting yield was achieved at pH 7, i.e. more favorable to MT activity rather than to Ch solubility, suggesting that the determining step of the grafting reaction is the formation of o-quinones. The FT-IR spectroscopy revealed that grafting induced a beta-sheet --> random coil conformational transition.     

Responsive hybrid hydrogels with volume transitions modulated by a titin immunoglobulin module

The I28 immunoglobulin (Ig)-like module of human cardiac titin, an elastic muscle protein, was used to cross-link acrylamide (AAm) copolymers into hybrid hydrogels. Cross-linking was accomplished through metal coordination bonding between terminal histidine tags (His tags) of the I28 module and metal-chelating nitrilotriacetic acid (NTA)-containing side chains on the copolymer. In solution, the beta-sheet structure of the I28 module unfolded with a transition midpoint of about 58 degrees C as the temperature was elevated. Hydrogels cross-linked with the I28 module demonstrated positive temperature responsiveness; they swelled to 3 times their initial volume at temperatures above the melting temperature of the cross-links. Positive temperature responsiveness is unusual for synthetic hydrogels. The I28 hybrid hydrogels demonstrate that cross-linking synthetic polymers with natural, well-characterized protein modules is a practical strategy for creating new materials with unique environmental responsiveness predictably determined by the mechanical properties of the protein cross-links. These new materials may be useful for controlled chemical delivery.     

固定化过氧化物酶丝素膜的制备及其性质

家蚕丝素经高浓度的中性盐氯化钙溶解后,制成了固定化过氧化物酶丝素膜,对这种酶膜的活性和理化特性作了分析,结果表明这种酶膜的活性高,酶促反应温度范围宽,最适pH5.0-7.0,热稳定性也较游离酶好,这与用溴化锂溶解丝素后制成的固定化过氧化物酶膜相仿.因此,用这种方法制成的丝素膜同样是一种良好的固定化酶的生物材料.