Patterns of dental wear in the Lengua Indians of Paraguay

Wear patterns were examined on dental casts of 202 living Lengua Indians from the Chaco area of Paraguay. Consideration was given to the development of the molar helicoidal plane, age-related changes in occlusal attrition, coalescence of dentine exposures, interproximal attrition, and erupted crown height. This study lends support to Osborn's theory of the helicoidal plane development by showing that attrition enhances rather than modifies posteruption molar occlusal planes. The rate of interproximal attrition was found to slow down with the eruption and functional initiation of the third molars. Sinuous and cavo-convex interproximal contact areas that are generated with age, however, appeared to be less abrasion resistant than straight surfaces, hence leading to an increase in interproximal attrition rates with advanced age. Maximum crown height reduction occurred between the ages of 20 and 40 years in central incisors, canines, and first molars. Kruskal-Wallis tests and log linera models failed to demonstrate significant sexually dimorphic or antimeric differences in wear patterns of Lengua teeth.     

Age-related variability in occlusal wear planes

Investigation of two populations of 136 individuals shows several patterns of occlusal wear plane change which are positively correlated with age. For individuals up to the age of 18, there is a characteristic pattern in which the occlusal wear planes of the mandibular teeth are lingually sloped and those of the maxillary dentition buccally sloped, with the exception of the maxillary premolars, which are also lingually sloped. The long axes of the mandibular teeth give them a lingual orientation relative to the maxillary teeth, and the long axes of the maxillary molars, by contrast, are buccally oriented. In the 18-30 age range for all sexes, the mandibular M1 becomes buccally sloped on its occlusal surface while the occlusal wear plane on the maxillary M1 becomes lingually sloped. Later age changes indicate a trend for the mandibular premolars to become buccally sloped, while the wear planes of the maxillary premolars remain lingually sloped. There is a corresponding tendency for the maxillary and mandibular second molars to undergo changes in the initial orientation of the occlusal wear planes.     

The study of dental occlusion in ancient skeletal remains from Mallorca (Spain): A new approach based on dental clinical practice

Occlusal characteristics, fundamental to assess the presence of malocclusion, have been often unexplored in bioarchaeological analyses. This is largely due to the fragmented condition of the skeletal remains. By applying a method that considers dental and maxillary features useful to evaluate occlusion in ancient fragmentary material, the purpose of this work is to define the occlusal features and explore the causes of malocclusion in a mediaeval population from Mallorca. The findings of this study suggest that normocclusion was present in ca. 60% of the individuals (N = 31), and that some characteristics, such as molar relationship, were slightly different from those of modern populations. The analysis of the occlusal features revealed for example that open-bite was absent in 85% of the sample, posterior open-bite was completely absent and overbite and overjet were normal in around 90% of the individuals. Statistically significant correlations between canine and molar relationships and between molar relationship and dental wear of the superior and inferior canines and incisors were observed. In addition, wear could affect the curve of Spee. All these findings strengthen the hypothesis that in ancient times malocclusion was not as generalized as in modern times. Although the factors that lead to malocclusion throughout centuries could have several causes, we suggest that in this population dental wear, which is strongly associated with the diet, was the fundamental causing factor.     

Polymorphic aspects of male anthropoid honing premolars.

A recent study has indicated that heritage may be an important component in explanations of interspecies variation in male anthropoid maxillary canines. To further test this hypothesis, comparative data for the maxillary canine's occlusal partner, the honing mandibular premolar, are presented. Relative to body mass, measurements of the honing premolar--length of the honing facet, mesiodistal length, and buccolingual breadth and shape (as expressed by the ratio of length to breadth)--show a similar but stronger heritage component than measurements of the maxillary canine. Results indicate that canine variation among male anthropoids has not yet been explained and that quantitative analyses of this issue will necessarily require a methodological approach which incorporates heritage as a factor.     

Patterns of molar wear in hunger-gatherers and agriculturalists

Tooth wear records valuable information on diet and methods of food preparation in prehistoric populations or extinct species. In this study, samples of modern and prehistoric hunger-gatherers and agriculturalists are used to test the hypothesis that there are systematic differences in patterns of tooth wear related to major differences in subsistence and food preparation. Flatness of molar wear is compared for five groups in hunger-gatherers (N = 298) and five groups of early agriculturalists (N = 365). Hunger-gatherers are predicted to develop flatter molar wear due to the mastication of tough and fibrous foods, whereas agriculturalists should develop oblique molar wear due to an increase in the proportion of ground and prepared food in the diet. A method is presented for the quantitative measurement and analysis of flatness of molar wear. Comparisons of wear plane angle are made between teeth matched for the same stage of occlusal surface wear, thus standardizing all groups to the same rate of wear. Agriculturalists develop highly angled occlusal wear planes on the entire molar dentition. Their wear plane angles tend to exceed hunger-gatherers by about 10 degrees in advanced wear. Wear plane angles are similar within subsistence divisions despite regional differences in particular foods. This approach can be used to provide supporting evidence of change in human subsistence and to test dietary hypotheses in hominoid evolution.     

Evaluating the “dual selection” hypothesis of canine reduction

A recently proposed model for canine reduction in hominid evolution (the “dual selection” model) suggests that canine reduction occurs as a result for incorporation of the canines into a functional incisal field. Among the evidence used to support this model are patterns of wear and occlusion of the canine teeth, particularly in female anthropoid primates. We examined wear and occlusal patterns of the canine teeth of 311 male and female anthropoid primates. We find no evidence that the canines are typically occluded tip-to-tip, or that they show wear patterns indicating a “gripping and pulling” function during food ingestion and processing. Furthermore, we do not find compelling evidence that the development of the mesial cristid is associated with canine reduction. While we agree that the mechanisms of selective pressures underlying canine reduction need to be investigated, the “dual selection” hypothesis is unsupported by comparative data. © 1996 Wiley-Liss, Inc.     

A nonadaptive dental trait

Compared to other anthropoid females, female cercopithecoids possess hypertrophied honing premolars (P₃) yet lack hypertrophied maxillary canines. In addition, female cercopithecoid maxillary canines are often tip-blunted, the crown rarely extends down to the entire shearing surface on the buccal face of P₃, and honing wear is usually confined to a small fraction of its hypertrophied buccal surface. The likely reason why the female P₃ has an unusually long buccal face is that genes involved in the expression of this morphology are also in males, for which the hypertrophied condition is adaptive—it serves as the honing surface for their hypertrophied canines. The data suggest that the hypertrophied P₃ of females is the correlated and nonadaptive response of an homologous characteristic. The possibility that this occurs in other female anthropoids and in other parts of the C/P complex is discussed, as well as the relevance of this phenomenon for understanding human canine evolution and identifying other traits which may also be examples of correlated response.     

Variation in occlusal dental wear of two Chalcolithic populations in the southern Levant

Occlusal wear rate and wear plane in two Chalcolithic ( approximately 6500-5500 BP) samples from the southern Levant were compared, using paired first and second mandibular molars. Though food staples in both societies were derived from agro-pastoralism, they were located in distinct environmental regions: Wadi (W.) Makkukh in the Judean desert, and Peqi'in in the Upper Galilee. Accordingly, it was predicted that variation in wear should occur due to their location in distinct environments. Jaw size and tooth size were measured to estimate the possible impact of these variables on wear scores. Molar occlusal surfaces were divided into four quadrants, and wear scores were recorded for each quadrant. Principal axis analysis was then performed between total wear scores of paired, adjacent first and second molars to assess wear rates. Principal axis analysis was also used to analyze the change in occlusal wear plane in each sample by comparing between-buccal-cusps wear scores of the first molar with lingual wear scores of the second molar. The results indicate that the occlusal wear plane was similar in both samples but that wear tended to be more rapid in W. Makkukh. Since both samples were similar in jaw/tooth size, it is argued that the results reflect less refined food-processing methods as well as the unintentional ingestion of sand by individuals interred in the Judean desert.     

步氏巨猿犬齿与前臼齿咬合关系的观察

步氏巨猿的上犬齿与下第一前臼齿的咬合关系有两种主要类型:一是相似于“猿类”的,另一相似于“人类”的。前者为雄性个体所具有,后者为雌性个体所具有。另有少数个体的则是中间类型。上犬齿与下第一前臼齿的咬合特征的分类学上的意义是可疑的。至少就绝大部分雄性步氏巨猿个体来说,很难认为其犬齿是参与臼齿的功能。步氏巨猿下第一前臼齿之所以呈双尖类型,与其犬齿并无直接的关系。     

Dental wear study in a 14th century skull of the Sao tribe, Cameroon

The aim of this work was to study the wear affecting the almost complete dentition of a Sao individual fossil from Cameroon prehistory (XIVth century). Occlusal surfaces of the fossil fragile pieces were plaster replicated with an original technique adapted from usual dental impression methods (silicon elastomer polymerising by addition). Axial macro-photographs of both sectional dental casts and original pieces made it possible to produce drawings of the occlusal areas on transparencies in order to superimpose the lateral hemiarch counterparts in their optimal intercuspal position. The study of interarch contacts was completed by confronting and observing the occluding position of hemiarch replicas. The occlusal analysis revealed that the wear extent was equivalent on left and right molars. Hall's occlusal wear index and Van Reenen and Reinach's classification of proximal wear allow assessment of the degree of wear extent on premolar and molar sections in relation to the side or the arch observed. The even bilateral proximal and occlusal wears observed on the different kinds of homologous teeth appeared as the main contributor to this well-balanced interarch occlusion. The mandibular incisor losses and the particular type of wear affecting lower canines led to the conclusion of the presence of a labret, a great number of which was found in the area. According to Miles' method of age assessment based on tooth wear, the pieces studied belonged to an individual between 30 and 40 years old.     

Changes in food processing and occlusal dental wear during the early agricultural period in northwest Mexico

Crown dimensions and occlusal surface wear rate and wear plane were evaluated using paired first and second mandibular molars from a sample of 84 Early Agricultural period (1600 B.C.-A.D. 200) skeletons from northwest Mexico. Although this period represents a major shift in subsistence strategies in the Sonoran Desert, from food-foraging to agriculture, archaeological and dental pathology studies have identified this period as one of relative dietary stability. It was therefore predicted that very little variation in occlusal wear would have occurred between the early phase (San Pedro: 1600-800 B.C.) and late phase (Cienega: 800 B.C.-A.D. 200). Comparison of crown diameters identified some phenotypic differences between sexes but not between archaeological phases. Molar occlusal surfaces were then divided into four quadrants, and wear scores recorded for each quadrant. Principle axis analysis was performed between total wear scores of paired, adjacent first and second mandibular molars to assess rate and occlusal wear plane over time. The analysis demonstrated that both wear rate and wear plane increased from the early to the late phase of the Early Agricultural period. These results indicate that although diet may have indeed remained stable during this period in the Sonoran Desert increases in the rate of wear and wear plane may reflect changes in food-processing techniques. It is suggested that more intensive processing of agricultural products during the Cienega phase simultaneously softened the diet to create more tooth-contact wear and introduced more grit to cause faster and more angled wear on the molar occlusal surfaces.     

Canine dimorphism

Canine dimorphism in many primates is exaggerated, with males possessing enormous, sharp canines that project far beyond the occlusal plane of the other teeth and females having smaller, less projecting canines. Ever since Darwin,¹ canine dimorphism generally has been attributed to sexual selection. However, recent analyses suggest that the evolution of canine dimorphism is complex and that the sexual selection hypothesis is only part of the story.     

The caries-attrition competition

Contradictory reports on the interreation of caries and attrition concerning their destructive activity at the occlusal surface of teeth required more investigation. Some suggested that the abrasive action of attrition worked against the progress of decay. Others proposed that attrition facilitated the development of caries in dentine exposed due to the dental wear. A comparison of the condition of teeth in western societies from an intermediate stage, with the preceding period characterized by excessive attrition, and with the following period of ongoing reduction of dental wear, might elucidate the mutual relationship. For this reason the almost complete dental assemblage of fifty men, whalers buried during their short sojourn in the Arctic in the 17th and 18th centuries at a Dutch whaling station, and the data of their contemporaries, were evaluated. The results confirmed the proposition that the rise in caries incidence from (pre-) medieval times on, was associated with an ongoing fall of dental attrition. Within this sample of an intermediate phase, one sees that the percentage of carious molars decreases considerably when the degree of dental wear increases. Besides, at the occlusal surface the decay was almost exclusively located in the natural fissures and pits of teeth, not in the exposed dentine due to wear. These findings strongly suggest a competitive relationship between progress of caries and attrition. The best impression of the attrition rate is gained by linkage of degree of dental attrition (i.e. functional age) to age at death. The wide age ranges fitting to the degrees of molar wear make it hazardous to use attrition for age determination.     

Canine "honing" in Australopithecus afarensis

The maxillary canines of Australopithecus afarensis show a distal wear facet that extends from the apex of the crown to a point near the distal cingulum. Although these facets bear a superficial resemblance to the honing facets found on the projecting portions of the canines of other anthropoids, a more detailed examination provided in this paper shows that they are not homologous or functionally equivalent. The facets are not related to the use of the maxillary canine as a weapon or as an additional masticatory surface. Instead, their presence in A. afarensis represented a blunting or dulling of the posterior edge of C so that its occlusion with P3 would be consistent with cheek tooth occlusion.     

Development of the helicoidal plane

In this study of thebelicoidal occlusal plane the relationships between tooth wear, the transverse slopes of mandibular molars and dental arch breadths were examined in 74 pre-contemporary Australian Aboriginal skulls. With increasing age and tooth wear the orientation of the mandibular occlusal surfaces increased towards the buccal. The differential occlusal orientation from first to third molars, present at eruption, tended to increase progressively with tooth wear. These functionally induced changes, together with regional differences in relative breadths of the maxillary and mandibular dental arches, are important in the development of abelicoidal occlusal plane.     

Canine Length in Wild Male Baboons: Maturation,Aging and Social Dominance Rank

Canines represent an essential component of the dentition for any heterodont mammal. In primates, like many other mammals, canines are frequently used as weapons. Hence, tooth size and wear may have significant implications for fighting ability, and consequently for social dominance rank, reproductive success, and fitness. We evaluated sources of variance in canine growth and length in a well-studied wild primate population because of the potential importance of canines for male reproductive success in many primates. Specifically, we measured maxillary canine length in 80 wild male baboons (aged 5.04–20.45 years) from the Amboseli ecosystem in southern Kenya, and examined its relationship with maturation, age, and social dominance rank. In our analysis of maturation, we compared food-enhanced baboons (those that fed part time at a refuse pit associated with a tourist lodge) with wild-feeding males, and found that food-enhanced males achieved long canines earlier than wild-feeding males. Among adult males, canine length decreased with age because of tooth wear. We found some evidence that, after controlling for age, longer canines were associated with higher adult dominance rank (accounting for 9% of the variance in rank), but only among relatively high-ranking males. This result supports the idea that social rank, and thus reproductive success and fitness, may depend in part on fighting ability mediated by canine size.     

Helicoidal plane of dental occlusion

A helicoidal plane of postcanine occlusion has been patchily reported in many recent and fossil dentitions of man, and has been suggested as a taxonomic marker distinguishing between the dentitions of Homo and Australopithecines. The present paper describes the helicoidal plane in 19 out of 23 modern human (probably Indian) worn dentitions, in both gracile and robust Australopithecines and in extant anthropoids. It is suggested that tooth wear converts the plane of occlusion present in little-worn teeth, the Monson curve, into a helicoidal plane when 1) the diet is more abrasive, 2) the enamel is thinner and less abrasion resistant, and 3) a longer time separates the eruption of the three molar teeth in a jaw quadrant. A model demonstrates that during the power stroke of a chewing cycle the working side molars move in much the same direction whether the molar occlusal plan follows a Monson curve or a helicoidal plane. The difference is that in the former case the three molars work at the same time while in the latter case they work in sequence from anterior to posterior, thereby concentrating force on one tooth at a time. Because the occlusal plane changes during the life of individuals consuming an abrasive diet, the condition of most anthropoids and hominids, it is argued that the Monson curve has functional significance not because of its influence on occlusal relations and/or jaw movement but because the molar teeth are embedded in bone roughly perpendicular to it, a direction which resists tilting of the teeth during mastication. It is concluded that the helicoidal plane probably has little if any value as a taxonomic marker.     

Canine size, shape, and bending strength in primates and carnivores

Anthropoid primates are well known for their highly sexually dimorphic canine teeth, with males possessing canines that are up to 400% taller than those of females. Primate canine dimorphism has been extensively documented, with a consensus that large male primate canines serve as weapons for intrasexual competition, and some evidence that large female canines in some species may likewise function as weapons. However, apart from speculation that very tall male canines may be relatively weak and that seed predators have strong canines, the functional significance of primate canine shape has not been explored. Because carnivore canine shape and size are associated with killing style, this group provides a useful comparative baseline for primates. We evaluate primate maxillary canine tooth size, shape and relative bending strength against body size, skull size, and behavioral and demographic measures of male competition and sexual selection, and compare them to those of carnivores. We demonstrate that, relative to skull length and body mass, primate male canines are on average as large as or larger than those of similar sized carnivores. The range of primate female canine sizes embraces that of carnivores. Male and female primate canines are generally as strong as or stronger than those of carnivores. Although we find that seed-eating primates have relatively strong canines, we find no clear relationship between male primate canine strength and demographic or behavioral estimates of male competition or sexual selection, in spite of a strong relationship between these measures and canine crown height. This suggests either that most primate canines are selected to be very strong regardless of variation in behavior, or that primate canine shape is inherently strong enough to accommodate changes in crown height without compromising canine function.     

Field age determination of leopards by tooth wear

Age determination is an important tool in wildlife studies. Estimating the age of animals in the field using tooth wear criteria may be subject to error as a result of variations between individuals, habitats and populations. Data on age estimation of leopards and tooth wear characteristics are lacking. Nineteen leopards in Namibia were assessed for tooth eruption and wear. Between 1991 and 1995 leopards (including 13 individuals of known age) were monitored at one year intervals ('28 leopard years') to record age and tooth wear. At the age of two years leopards had fully developed dentition. Wear started with the incisors and canines, and spread to the premolars and molars. A chronology of tooth eruption and wear in relation to age is presented. Above the age of three years, male leopards showed higher frequencies of enamel flaking and canine fractures than females.     

Seasonal variation in molar outline of bank voles: An effect of wear?

Morphometric characters can be of use for elucidating the evolutionary history of species by providing an insight into the selective pressure related to the character of interest, and by allowing integration of fossil specimens. This potential interest of phenotypic characters, however, depends on how much other sources of variation, such as the life-history of the animal, may blur an evolutionary signal. For instance, age structure varies along the year, causing in turn various assemblages of wear stages in the teeth sampled at a given place and time. In this context, we investigated the season of trapping as potential source of variation in the size and shape of the molar occlusal surface of the bank vole, Clethrionomys glareolus.The size and shape of the occlusal surface of the third upper molar was quantified using outline analysis in 60 bank voles from Finland, trapped at the same study site in successive spring and autumn. The occlusal surface clearly differed in size and shape between the two seasons of trapping. Using 3D imaging as a visual support, we interpret this difference as the result of differential wear. The population in autumn is dominated by young specimens with unworn teeth whereas spring populations are composed of old animals with worn down molars. The range of seasonal variation in tooth size and shape appears to be of the same order of magnitude as biogeographic variation, demonstrating that differential wear may have a strong impact on biogeographic and evolutionary studies. Yet, beyond the effect of trapping season, a biogeographic signal still emerged, related to the genetic lineages evidenced in other studies. In consequence, morphometric characters such as size and shape of molar occlusal surfaces appear as valuable tracers of biogeographic differentiation, but future studies should take seasonal variations into account for more robust interpretation.