Bacterial hydrophobicity, an overall parameter for the measurement of adhesion potential to soil particles

The adhesion of Salmonella typhimurium to the mineral particles quartz, albite, feldspar, and magnetite was shown to correlate with the hydrophobicity of the cell surface as measured by hydrophobic interaction chromatography. The same effects were also seen for seven other selected test strains, including Streptococcus faecalis, Streptococcus faecium, Escherichia coli, Citrobacter freundii, Shigella sonnei, and Shigella boydii. When the test strain of Salmonella typhimurium, was repeatedly cultivated in Luria broth, thus selecting for different degrees of fimbriation and roughness of the cell surface, varied cell hydrophobicity but constant negative and positive charge values were obtained. High hydrophobicity values always coincided with enhanced adhesion to the mineral particles. The negative charge of the bacterial surface as measured by electrostatic interaction chromatography appeared to play no role in the adhesion event. However, the positive charges on the cell surface contributed to the adhesion process. This was especially evident for cells exhibiting a high degree of hydrophobicity. Alteration of the pH between 4 and 9 did not significantly affect the adhesion process.     

Cell surface charge characteristics and their relationship to bacterial attachment to meat surfaces

Cell surface charge and hydrophobicity of Bacillus subtilis, Escherichia coli O157:H7, Listeria monocytogenes, Salmonella typhimurium, Serratia marcescens, Staphylococcus aureus, and Staphylococcus epidermidis were determined by hydrocarbon adherence, hydrophobic interaction, and electrostatic interaction chromatography. Surface charge and hydrophobicity were compared with the initial attachment values and rates of attachment of the bacteria to meat surfaces. There was a linear correlation between the relative negative charge on the bacterial cell surface and initial attachment to lean beef muscle (r2 = 0.885) and fat tissue (r2 = 0.777). Hydrophobicity correlated well with attachment to fat tissue only. The relative hydrophobicity of each bacterium was dependent on the specific method of determination, with wide variations noted between methods.     

Cell surface charge characteristics and their relationship to bacterial attachment to meat surfaces.

Cell surface charge and hydrophobicity of Bacillus subtilis, Escherichia coli O157:H7, Listeria monocytogenes, Salmonella typhimurium, Serratia marcescens, Staphylococcus aureus, and Staphylococcus epidermidis were determined by hydrocarbon adherence, hydrophobic interaction, and electrostatic interaction chromatography. Surface charge and hydrophobicity were compared with the initial attachment values and rates of attachment of the bacteria to meat surfaces. There was a linear correlation between the relative negative charge on the bacterial cell surface and initial attachment to lean beef muscle (r2 = 0.885) and fat tissue (r2 = 0.777). Hydrophobicity correlated well with attachment to fat tissue only. The relative hydrophobicity of each bacterium was dependent on the specific method of determination, with wide variations noted between methods.     

Fimbriae mediated nonspecific adhesion of Salmonella typhimurium to mineral particles

The adhesion of cells of Salmonella typhimurium to albite, biotite, felspar, magnetite and quartz was correlated to the presence of fimbriae and degree of hydrophobicity and charge of the bacterial surface. It was found that the presence of fimbriae resulted in a higher degree of adhesion compared to adhesion of nonfimbriated cells. The significance of the physico-chemical characteristics of fimbriae was shown by a direct linearity between high hydrophobicity of fimbriated cells and degree of adhesion to the mineral particles. Fimbriated cells exhibited higher negative as well as positive surface charge as compared to nonfimbriated cells. Adhesion to several of the minerals was shown to be independent of the extent of negative charges on the bacterial surfaces. A high degree of adhesion to biotite, possibly due to a combination of characteristics of the particles, was not related to either bacterial fimbriation or a physico-chemical characteristic of the bacterial surface. The results of the nonspecific adhesion observed are discussed in terms of available binding sites and distribution of physico-chemical characteristics on the bacterial cell surface structures.     

Association with HeLa cells of LPS mutants of Salmonella typhimurium and Salmonella minnesota in relation to their physicochemical surface properties

Different LPS mutants of Salmonella typhimurium and Salmonella minnesota have been investigated with respect to (1) their tendency to associate with HeLa cell monolayers, and (2) their physicochemical surface properties. Aqueous biphasic partitioning, hydrophobic interaction chromatography, and ion exchange chromatography have been used to characterize the bacterial cell surface properties with respect to charge and hydrophobicity. Liability to hydrophobic interaction was defined either by the change of partition in a dextran-polyethylene-glycol (PEG) system by the addition of PEG-palmitate (P-PEG), or by the elution pattern from Octyl-Sepharose. Accordingly, charge was asssessed by the effect of positively charged trimethylamino-PEG (TMA-PEG) on the partition, and by the elution from DEAE-Sephacel. Bacterial being negatively charged and liable to hydrophobic interaction had the highest tendency to associate with HeLa cells. In some cases the methods for surface analysis gave conflicting results on charge and/or liability to hydrophobic interaction of the same LPS mutant. Possible reasons for these differences and the role of bacterial cell surface structures contributing to physicochemical character are discussed.     

Effects of Hydrophobic and Electrostatic Cell Surface Properties of Bacteria on Feeding Rates of Heterotrophic Nanoflagellates

The influence of cell surface hydrophobicity and electrostatic charge of bacteria on grazing rates of three common species of interception-feeding nanoflagellates was examined. The hydrophobicity of bacteria isolated from freshwater plankton was assessed by using two different methods (bacterial adhesion to hydrocarbon and hydrophobic interaction chromatography). The electrostatic charge of the cell surface (measured as zeta potential) was analyzed by microelectrophoresis. Bacterial ingestion rates were determined by enumerating bacteria in food vacuoles by immunofluorescence labelling via strain-specific antibodies. Feeding rates varied about twofold for each flagellate species but showed no significant dependence on prey hydrophobicity or surface charge. Further evidence was provided by an experiment involving flagellate grazing on complex bacterial communities in a two-stage continuous culture system. The hydrophobicity values of bacteria that survived protozoan grazing were variable, but the bacteria did not tend to become more hydrophilic. We concluded that variability in bacterial cell hydrophobicity and variability in surface charge do not severely affect uptake rates of suspended bacteria or food selection by interception-feeding flagellates.     

Effects of hydrophobic and electrostatic cell surface properties of bacteria on feeding rates of heterotrophic nanoflagellates

The influence of cell surface hydrophobicity and electrostatic charge of bacteria on grazing rates of three common species of interception-feeding nanoflagellates was examined. The hydrophobicity of bacteria isolated from freshwater plankton was assessed by using two different methods (bacterial adhesion to hydrocarbon and hydrophobic interaction chromatography). The electrostatic charge of the cell surface (measured as zeta potential) was analyzed by microelectrophoresis. Bacterial ingestion rates were determined by enumerating bacteria in food vacuoles by immunofluorescence labelling via strain-specific antibodies. Feeding rates varied about twofold for each flagellate species but showed no significant dependence on prey hydrophobicity or surface charge. Further evidence was provided by an experiment involving flagellate grazing on complex bacterial communities in a two-stage continuous culture system. The hydrophobicity values of bacteria that survived protozoan grazing were variable, but the bacteria did not tend to become more hydrophilic. We concluded that variability in bacterial cell hydrophobicity and variability in surface charge do not severely affect uptake rates of suspended bacteria or food selection by interception-feeding flagellates.     

The adhesion of pathogenic microflora on carbon sorbents

The adsorbing activity of granulated carbonic sorbents SKN and KAU, as well as their oxidated forms, containing protogenic carboxylic and phenolic groups with respect to Shigella flexneri, Salmonella typhimurium, Escherichia coli, Streptococcus aureus and Pseudomonas aeruginosa pathogenic strains has been studied. As shown in this study, the process of interaction between microorganisms and carbonic sorbents has two stages. At the first stage the main role is played by long-distance electrostatic forces and at the second stage, by Van der Waals short-distance forces, as well as bonds formed between cell structures and surface groupings of carbonaceous materials. In the mechanism of interaction between microbial cells and carbons the geometry of carbon surface plays an important role. KAU(0)-1 exhibits the highest degree of adhesion with respect to pathogenic bacteria.     

Physico-chemical surface characteristics and adhesive properties of Streptococcus salivarius strains with defined cell surface structures

Physico-chemical surface characteristics and adhesive properties of a series of mutants of Streptococcus salivarius HB with defined cell surface structures were determined. Zeta potentials showed no relation either with the presence or absence of specific antigens on the bacterial cell surface, or with the adhesive properties of the cells. Hydrophobicity was assessed by surface free energy determination from measured contact angles, by adsorption to hexadecane and by hydrophobic interaction chromatography. Generally, the progressive removal of fibril subclasses from the cell surface resulted in a reduced hydrophobicity. However, specific fibrillar subclasses appeared to contribute to surface hydrophobicity to widely different extents. Bacterial adhesion to polymethylmethacrylate increased with increasing hydrophobicity of the mutants. However, adhesion to a more complex biological substratum, such as saliva-coated hydroxyapatite, correlated only partly with hydrophobicity. The organism, deprived of most of its fibrillar surface structures, clearly showed the least adhesion to hydrophobic ligands, to both polymethylmethacrylate and saliva-coated hydroxyapatite, and had a significantly higher surface free energy than the other mutants and the parent strain.     

Association with HeLa cells of LPS mutants ofSalmonella typhimurium andSalmonella minnesota in relation to their physicochemical surface properties

Different LPS mutants ofSalmonella typhimurium andSalmonella minnesota have been investigated with respect to (1) their tendency to associate, with HeLa cell monolayers, and (2) their physicochemical surface properties. Aqueous biphasic partitioning, hydrophobic interaction chromatography, and ion exchange chromatography have been used to characterize the bacterial cell surface properties with respect to charge and hydrophobicity. Liability to hydrophobic interaction was defined either by the change of partition in a dextran-polyethylene-glycol (PEG) system by the addition of PEG-palmitate (P-PEG), or by the elution pattern from Octyl-Sepharose. Accordingly, charge was assessed by the effect of positively charged trimethylamino-PEG (TMA-PEG) on the partition, and by the elution from DEAE-Sephacel. Bacterial being negatively charged and liable to hydrophobic interaction had the highest tendency to associate with HeLa cells. In some cases the methods for surface analysis gave conflicting results on charge and/or liability to hydrophobic interaction of the same LPS mutant. Possible reasons for these differences and the role of bacterial cell surface structures contributing to physicochemical character are discussed.     

Influence of physico-chemical properties of porous microcarriers on the adhesion of an anaerobic consortium

The ability for biomass colonization of four porous mineral microcarriers (sepiolite, clay, pozzolana and foam glass-Poraver), was studied and related to their surface properties. The surface hydrophobicity of the mineral carriers was a more important factor influencing colonization by the anaerobic consortium than was surface charge. It was possible to correlate linearly the degree of hydrophobicity with the biomass retention capacity. Although the thermodynamic theory did not explain adhesion, an increase in cell attachment was directly related to the decrease of the positive values of the free energy of adhesion. Surface roughness, porosity and the amount of surface Mg²⁺, were also determinant factors in bacterial immobilization. However a great biomass accumulation can originate a decrease in biological activity due to mass transfer limitations. Journal of Industrial Microbiology & Biotechnology (2000) 24, 181–186. Received 09 August 1999/ Accepted in revised form 01 December 1999     

Hydrophobicity, Adhesion, and Surface-Exposed Proteins of Gliding Bacteria

The cell surface hydrophobicities of a variety of aquatic and terrestrial gliding bacteria were measured by an assay of bacterial adherence to hydrocarbons (BATH), hydrophobic interaction chromatography, and the salt aggregation test. The bacteria demonstrated a broad range of hydrophobicities. Results among the three hydrophobicity assays performed on very hydrophilic strains were quite consistent. Bacterial adhesion to glass did not correlate with any particular measure of surface hydrophobicity. Several adhesion-defective mutants of Cytophaga sp. strain U67 were found to be more hydrophilic than the wild type, particularly by the BATH assay and hydrophobic interaction chromatography. The very limited adhesion of these mutants correlated well with hydrophilicity as determined by the BATH assay. The hydrophobicities of several adhesion-competent revertants ranged between those of the wild type and the mutants. As measured by the BATH assay, starvation increased hydrophobicity of both the wild type and an adhesion-defective mutant. During filament fragmentation of Flexibacter sp. strain FS-1, marked changes in hydrophobicity and adhesion were accompanied by changes in the arrays of surface-exposed proteins as detected by an immobilized radioiodination procedure.     

Influence of aeration of Candida albicans during culturing on their surface aggregation in the presence of adhering Streptococcus gordonii

Candida albicans surfaces are extremely sensitive to changes in growth conditions. In this study, adhesion to glass of aerated and non-aerated C. albicans ATCC 10261 in the presence and absence of adhering Streptococcus gordonii NCTC 7869 was determined in a parallel plate flow chamber. In addition, the influence of aeration on the yeast cell surface hydrophobicity, surface charge, and elemental cell surface composition was measured. S. gordonii adhering at the glass surface caused a reduction in the initial deposition rate of C. albicans, regardless of aeration. In a stationary end-point, only adhesion of non-aerated C. albicans was suppressed by the adhering S. gordonii. Non-aerated yeasts had a higher O/C elemental surface concentration ratio, indicative of cell surface polysaccharides, than aerated yeasts, at the expense of nitrogen-rich cell surface proteins. Both yeasts were essentially uncharged, but the nitrogen-rich cell surface of aerated yeasts had a slightly higher water contact angle than non-aerated yeasts. Summarizing, this study suggests that highly localized, hydrophobic cell surface proteins on C. albicans are a prerequisite for their interaction with adhering streptococci.     

A comparison of five methods for assaying bacterial hydrophobicity

Five methods for assaying bacterial surface hydrophobicity, namely, bacterial adherence to hydrocarbons, salt aggregation, hydrophobic interaction chromatography, adhesion to polystyrene and latex particle agglutination were used to compare the hydrophobic surface properties of Escherichia coli, Acinetobacter calcoaceticus, Staphylococcus aureus and Streptococcus mitis. Two strains of A. calcoaceticus, including RAG-1, gave strong positive results by all five methods. S. mitis gave weak or negative results by all methods. The results for the other bacteria varied with the method. We conclude that reliance on one method for such tests is inadequate.     

Effects of pantolactone and butyrolaectone on the pleiotropic phenotypes of lon mutants and on thermal induction of the SOS phenomena in a tif mutant of Escherichia coli K12

Hydrophobic and charge-charge interactions of Salmonella typhimirium and Serratia marcescens were determined and related to their content of fimbriae and lipopolysaccharide (LPS). The cell surface structures were characterized with hydrophobic interaction chromatography (HIC), electrostatic interaction chromatography (ESIC) and particle electrophoresis measurements. The degree of interaction at the air-water interface was tested using a monolayered lipid film applied to an aqueous surface. The cell surface hydrophobicity of S. typhimurium in the presence of fimbriae was less in smooth than in rought bacteria. Examination of a series of rough mutants of S. typhimurium indicates that reduction of the O-side chain and core oligosaccharides was correlated with increased cell hydrophobicity. The enrichment factors at the air-water interface were significantly higher for fimbriated than for non-fimbriated S. typhimurium cells. Fimbriated S. marcescens cells were less hydrophobic and adhered to a lesser degree at the air-water surface than non-fimbriated counterparts. Electrophoretic measurements and adsorption to ion exchangers gives different information about the surface charge of bacteria. The latter technique gives the interaction between localized charged surfaces.Abbreviations HIC hydrophobic interaction chromatography - ESIC electrostatic interaction chromatography - LPS lipopolysaccharide - PBS phosphate buffered saline solution     

Anionic sites on the envelope of Salmonella typhimurium mapped with cationized ferritin

Binding of either ferritin (F) or cationized ferritin (CF) was employed to indicate the surface charge of the envelope of mainly two Salmonella typhimurium strains (395 MR10, a Rd-mutant, and LT2-M1, a UDP-galactose-4-epimerase-less mutant). Lowering the pH from 7 to 4 decreased binding of CF, but increased binding of F. At low concentrations, the distribution of CF on S. typhimurium 395 MR10 was in general random, with individual ferritin molecules often forming clusters of two or three particles. At ionic strengths of 0.25M NaCl, ferritin produced distinctive, larger clusters at relatively few sites (10-50/cell). Addition of galactose to cultures of growing S. typhimurium, LT2-M1 reduced the binding of CF in 1-10 min, and numerous ferritin-free areas became visible. Possibly this is caused by a pluri-focal reduction in the negative cell surface charge that was generated at the multiple sites of export of new, smooth-type lipopolysaccharide, which either exhibits lesser charge or masks a preexisting surface charge. Dividing cells may show unequal charges on the prospective daughter cells, and the difference in the capacity for ferritin adsorption of both daughter cells is sharply separated at the division site.     

A comparison of various methods to determine hydrophobic properties of streptococcal cell surfaces

In order to determine whether various methods which are commonly applied to determine the hydrophobicity of bacterial cell surfaces yield similar results, the hydrophobicity of a range of oral streptococcal isolates was measured using various methods including adsorption to hexadecane, hydrophobic interaction chromatography, salt-aggregation and contact angle measurements. In addition the zela potential and the adhesion to saliva-coated hydroxyapatite were determined. To compare the results of the different methods, linear and rank correlation coefficients were calculated. The resulting correlations were weak when applied to the whole range of strains even in those cases where the tests are expected to probe the same surface characteristics. However, generally good correlations were obtained when a set of strains was examined which were derived from a single parent strain and which only differed in defined surface structures. Accordingly it must be concluded from the methods applied here, that if is not possible to define the surface ‘hydrophobicity’ of a bacterium other than on a comparative level with closely related strains. No clear correlation was found between any hydrophobicity test and the adhesion to saliva-coated hydroxyapatite.     

Transmembrane diffusion of hydrophobic antimicrobial agents and cell surface hydrophobicity in Bacteroides fragilis

The transmembrane diffusion of hydrophobic antimicrobial agents, e.g. lincomycin and clindamycin, was examined in Bacteroides fragilis which is sensitive to these agents. The results showed that these agents penetrate efficiently through the outer membrane. Cell surface hydrophobicity measured by the partition assay between water and p-xylene revealed that the cell surface of B. fragilis is more hydrophobic than that of Salmonella typhimurium or Pseudomonas aeruginosa. Furthermore, treatment with low concentrations of surfactant caused cell lysis. These results suggest that the cell surface hydrophobicity in B. fragilis plays an important role in the efficient transmembrane penetration of hydrophobic compounds. This efficiency explains the susceptibility of B. fragilis to hydrophobic antimicrobial agents.     

不同底物培养的细胞吸附固体基质和有机溶剂的差异

目的:对细菌吸附有机溶剂法进行一定的修改,探索水相溶液pH和电解质浓度对测定细胞疏水性的影响,以及不同底物培养的细胞疏水性的差异性。探索细胞和固体间的静电作用和疏水作用对细菌早期吸附的影响。方法:以9K液体培养基为水相溶液,测定不同pH值和电解质浓度下细胞转移到有机相的吸附率。测定不同底物培养的细胞的Zeta电位以及在石英砂和黄铜矿表面的吸附率。结果:水相溶液pH值的变化并没有引起细胞转移到有机溶液的吸附率的显著变化,而在实验所用的电解质浓度梯度范围内,随着浓度的增加,细胞转移到有机溶剂的吸附率也随之增加,但是以单质硫为底物培养的细胞的吸附率始终大于以Fe2+和黄铜矿为底物培养的细胞。在溶液pH 2.0的条件下,石英砂和黄铜矿带负电,单质硫培养的细胞带正电,而以Fe2+和黄铜矿为底物培养的额细胞带负电。结论:细胞表面疏水性不会受到溶液pH值变化的扰动,但是却会随着电解液浓度的增加而增加,以单质硫为底物培养的细胞的疏水性大于以Fe2+和黄铜矿为底物培养的细胞,不同的细胞表面均含有大量的作为电子供体和电子受体的官能团。不同底物培养的细胞在石英砂和黄铜矿表面的早期吸附受到静电作用和疏水作用力的共同影响。     

Bacterial adhesion at synthetic surfaces.

A systematic investigation into the effect of surface chemistry on bacterial adhesion was carried out. In particular, a number of physicochemical factors important in defining the surface at the molecular level were assessed for their effect on the adhesion of Listeria monocytogenes, Salmonella typhimurium, Staphylococcus aureus, and Escherichia coli. The primary experiments involved the grafting of groups varying in hydrophilicity, hydrophobicity, chain length, and chemical functionality onto glass substrates such that the surfaces were homogeneous and densely packed with functional groups. All of the surfaces were found to be chemically well defined, and their measured surface energies varied from 15 to 41 mJ. m(-2). Protein adsorption experiments were performed with (3)H-labelled bovine serum albumin and cytochrome c prior to bacterial attachment studies. Hydrophilic uncharged surfaces showed the greatest resistance to protein adsorption; however, our studies also showed that the effectiveness of poly(ethyleneoxide) (PEO) polymers was not simply a result of its hydrophilicity and molecular weight alone. The adsorption of the two proteins approximately correlated with short-term cell adhesion, and bacterial attachment for L. monocytogenes and E. coli also correlated with the chemistry of the underlying substrate. However, for S. aureus and S. typhimurium a different pattern of attachment occurred, suggesting a dissimilar mechanism of cell attachment, although high-molecular-weight PEO was still the least-cell-adsorbing surface. The implications of this for in vivo attachment of cells suggest that hydrophilic passivating groups may be the best method for preventing cell adsorption to synthetic substrates provided they can be grafted uniformly and in sufficient density at the surface.