Anti-angiogenic peptides identified in thrombospondin type I domains

SeqA proteins of Escherichia coli bound to the hemimethylated GATC sequences (hemi-sites) interact with each other and eventually form an aggregate. SeqA foci, which are suggested to be formed by aggregation, play important roles in the regulation of chromosome replication and segregation. We found that aggregation of SeqA proteins was preceded by cooperative interactions between these proteins bound to hemi-sites. Positively charged amino acids in the hinge region, which connects the N-terminal and C-terminal domain of SeqA, were critical for SeqA aggregation on hemimethylated DNA. Although the substitution of positively charged amino acids with negatively charged or neutral amino acids maintained the binding and cooperative interaction of mutant proteins, these proteins were defective in aggregation and foci formation in vitro and in vivo, respectively. Our results suggest that in vivo SeqA foci were formed by aggregation following cooperative interactions between SeqA proteins bound to hemi-sites.     

Binding of SeqA protein to hemi-methylated GATC sequences enhances their interaction and aggregation properties

The SeqA protein regulates chromosome initiation and is involved in segregation in Escherichia coli. One SeqA protein binds to two hemi-methylated GATC sequences to form a stable SeqA-DNA complex. We found that binding induced DNA bending, which was pronounced when the two sequences were on the same face of the DNA. Two SeqA molecules bound cooperatively to each pair of hemi-methylated sites when the spacing between the sites was < or = 30 bp. This cooperative binding was able to stabilize the binding of a wild type to a single hemi-methylated site, or mutant form of SeqA protein to hemi-methylated sites, although such binding did not occur without cooperative interaction. Two cooperatively bound SeqA molecules interacted with another SeqA bound up to 185 bp away from the two bound SeqA proteins, and this was followed by aggregation of free SeqA proteins onto the bound proteins. These results suggest that the stepwise interaction of SeqA proteins with hemi-methylated GATC sites enhances their interaction and leads to the formation of SeqA aggregates. Cooperative interaction followed by aggregation may be the driving force for formation of the SeqA foci that appear to be located behind replication forks.     

Insights into negative modulation of E. coli replication initiation from the structure of SeqA-hemimethylated DNA complex

The SeqA protein binds clusters of fully methylated or hemimethylated GATC sequences at oriC and negatively modulates the initiation of DNA replication. We find that SeqA can be proteolytically cleaved into an N-terminal multimerization and a C-terminal DNA-binding domain and have determined the crystal structure of the C-terminal domain in complex with a hemimethylated GATC site. SeqA makes direct hydrogen bonds and van der Waals contacts with the hemimethylated A-T base pair in addition to interactions with the surrounding bases and DNA backbone. The tetrameric protein-DNA complex found in the crystal suggests that SeqA binds multiple GATC sites on separate DNA duplexes, altering the overall DNA topology and sequestering oriC from replication initiation.     

The Escherichia coli SeqA protein

The Escherichia coli SeqA protein contributes to regulation of chromosome replication by preventing re-initiation at newly replicated origins. SeqA protein binds to new DNA which is hemimethylated at the adenine of GATC sequences. Most of the cellular SeqA is found complexed with the new DNA at the replication forks. In vitro the SeqA protein binds as a dimer to two GATC sites and is capable of forming a helical fiber of dimers through interactions of the N-terminal domain. SeqA can also bind, with less affinity, to fully methylated origins and affect timing of “primary” initiations. In addition to its roles in replication, the SeqA protein may also act in chromosome organization and gene regulation.     

Identification of functional domains of the Escherichia coli SeqA protein

The Escherichia coli SeqA protein, a negative regulator of chromosomal DNA replication, prevents the overinitiation of replication within one cell cycle by binding to hemimethylated G-mA-T-C sequences in the replication origin, oriC. In addition to the hemimethylated DNA-binding activity, the SeqA protein has a self-association activity, which is also considered to be essential for its regulatory function in replication initiation. To study the functional domains responsible for the DNA-binding and self-association activities, we performed a deletion analysis of the SeqA protein and found that the N-terminal (amino acid residues 1-59) and the C-terminal (amino acid residues 71-181) regions form structurally distinct domains. The N-terminal domain, which is not involved in DNA binding, has the self-association activity. In contrast, the C-terminal domain, which lacks the self-association activity, specifically binds to the hemimethylated G-mA-T-C sequence. Therefore, two essential SeqA activities, self-association and DNA-binding, are independently performed by the structurally distinct N-terminal and C-terminal domains, respectively.     

Binding of SeqA protein to DNA requires interaction between two or more complexes bound to separate hemimethylated GATC sequences

The SeqA protein binds to the post-replicative forms of the origins of replication of the Escherichia coli chromosome (oriC) and the P1 plasmid (P1oriR) at hemimethylated GATC adenine methylation sites. It appears to regulate replication by preventing premature reinitiation. However, SeqA binding is not exclusive to replication origins: different fragments with hemimethylated GATC sites can bind SeqA in vitro when certain rules apply. Most notably, more than one such site must be present on a bound fragment. The protein appears to recognize individual hemimethylated sites, but must undergo an obligate cooperative interaction with a nearby bound protein for stable binding. SeqA contacts both DNA strands in a discrete patch at each hemimethylated GATC sequence. All four GATC bases are contacted and are essential for binding. Although the recognized sequence is symmetrical, the footprint on the methylated strand is always broader, suggesting that the bound protein is positioned asymmetrically with its orientation dictated by the position of the unique methyl group. Studies of alternative spacings and relative orientations of adjacent sites suggest that each site may be recognized by a symmetrical dimer with an induced asymmetry in one of the subunits similar to that seen with certain type II restriction endonucleases.     

A case for sliding SeqA tracts at anchored replication forks during Escherichia coli chromosome replication and segregation

SeqA is an Escherichia coli DNA-binding protein that acts at replication origins and controls DNA replication. However, binding is not exclusive to origins. Many fragments containing two or more hemi-methylated GATC sequences bind efficiently. Binding was optimal when two such sequences were closely apposed or up to 31 bases apart on the same face of the DNA helix. Binding studies suggest that neighboring bound proteins contact each other to form a complex with the intervening DNA looped out. There are many potential binding sites distributed around the E.coli chromosome. As replication produces a transient wave of hemi-methylation, tracts of SeqA binding are likely to associate with each fork as replication progresses. The number and positions of green fluorescent protein-SeqA foci seen in living cells suggest that they correspond to these tracts, and that the forks are tethered to planes of cell division. SeqA may help to tether the forks or to organize newly replicated DNA into a structure that aids DNA to segregate away from the replication machinery.     

Interactions of the Integrase Protein of the Conjugative Transposon Tn916 with Its Specific DNA Binding Sites

The binding of two chimeric proteins, consisting of the N-terminal or C-terminal DNA binding domain of Tn916 Int fused to maltose binding protein, to specific oligonucleotide substrates was analyzed by gel mobility shift assay. The chimeric protein with the N-terminal domain formed two complexes of different electrophoretic mobilities. The faster-moving complex, whose formation displayed no cooperativity, contained two protein monomers bound to a single DNA molecule. The slower-moving complex, whose formation involved cooperative binding (Hill coefficient > 1.0), contained four protein monomers bound to a single DNA molecule. Methylation interference experiments coupled with the analysis of protein binding to mutant oligonucleotide substrates showed that formation of the faster-moving complex containing two protein monomers required the presence of two 11-bp direct repeats (called DR2) in direct orientation. Formation of the slower-moving complex required only a single DR2 repeat. Binding of the N-terminal domains in vivo could serve to position two Int monomers on the DNA near each end of the transposon and assist in bringing together the ends of the transposon so that excision can occur. The chimeric protein with the C-terminal domain of Int also formed two complexes of different electrophoretic mobilities. The major, slower-moving complex, whose formation involved cooperative binding, contained two protein molecules bound to one DNA molecule. This finding suggested that while the C-terminal domain of Int can bind DNA as a monomer, a cooperative interaction between two monomers of the C-terminal domain may help to bring the ends of the transposon together during excision.     

Regulation of Sister Chromosome Cohesion by the Replication Fork Tracking Protein SeqA

Analogously to chromosome cohesion in eukaryotes, newly replicated DNA in E. coli is held together by inter-sister linkages before partitioning into daughter nucleoids. In both cases, initial joining is apparently mediated by DNA catenation, in which replication-induced positive supercoils diffuse behind the fork, causing newly replicated duplexes to twist around each other. Type-II topoisomerase-catalyzed sister separation is delayed by the well-characterized cohesin complex in eukaryotes, but cohesion control in E. coli is not currently understood. We report that the abundant fork tracking protein SeqA is a strong positive regulator of cohesion, and is responsible for markedly prolonged cohesion observed at “snap” loci. Epistasis analysis suggests that SeqA stabilizes cohesion by antagonizing Topo IV-mediated sister resolution, and possibly also by a direct bridging mechanism. We show that variable cohesion observed along the E. coli chromosome is caused by differential SeqA binding, with oriC and snap loci binding disproportionally more SeqA. We propose that SeqA binding results in loose inter-duplex junctions that are resistant to Topo IV cleavage. Lastly, reducing cohesion by genetic manipulation of Topo IV or SeqA resulted in dramatically slowed sister locus separation and poor nucleoid partitioning, indicating that cohesion has a prominent role in chromosome segregation.     

Positive supercoiling is generated in the presence of Escherichia coli SeqA protein

In Escherichia coli, the SeqA protein is known as a negative regulator of chromosome replication. This protein is also suggested to have a role in chromosome organization. SeqA preferentially binds to hemi-methylated DNA and is by immunofluorescence microscopy seen as foci situated at the replication factories. Loss of SeqA leads to increased negative supercoiling of the DNA. We show that purified SeqA protein bound to fully methylated, covalently closed or nicked circular DNA generates positive supercoils in vitro in the presence of topoisomerase I or ligase respectively. This means that binding of SeqA changes either the twist or the writhe of the DNA. The ability to affect the topology of DNA suggests that SeqA may take part in the organization of the chromosome in vivo. The topology change performed by SeqA occurred also on unmethylated plasmids. It is, however, reasonable to suppose that in vivo the major part of such activity is performed on hemi-methylated DNA at the replication factories and presumably forms the basis for the characteristic SeqA foci observed by fluorescence microscopy.     

Sequential binding of SeqA to paired hemi-methylated GATC sequences mediates formation of higher order complexes

Preferential binding of the SeqA protein to hemi-methylated GATC sequences functions as a negative regulator for Escherichia coli initiation of chromosomal replication at oriC and is implicated in segregating replicated chromosomes for cell division. We demonstrate that sequential binding of one SeqA tetramer to a set of two hemi-methylated sites mediates formation of higher-order complexes. The absence of cross-binding to separate DNAs suggests that two monomers of a SeqA tetramer bind to two hemi-methylated sites on DNA. The interaction among SeqA proteins bound to at least six adjacent hemi-methylated sites induces aggregation of free proteins to bound proteins. Aggregation might be indicative of SeqA foci, which appear to track replication forks in vivo. Studies of the properties of SeqA binding will contribute to our understanding of the function of SeqA.     

Structural and biochemical analyses of hemimethylated DNA binding by the SeqA protein

The Escherichia coli SeqA protein recognizes the 11 hemimethylated G-^mA-T-C sites in the oriC region of the chromosome, and prevents replication over-initiation within one cell cycle. The crystal structure of the SeqA C-terminal domain with hemimethylated DNA revealed the N⁶-methyladenine recognition mechanism; however, the mechanism of discrimination between the hemimethylated and fully methylated states has remained elusive. In the present study, we performed mutational analyses of hemimethylated G-^mA-T-C sequences with the minimal DNA-binding domain of SeqA (SeqA_71–181), and found that SeqA_71–181 specifically binds to hemimethylated DNA containing a sequence with a mismatched ^mA:G base pair [G-^mA(:G)-T-C] as efficiently as the normal hemimethylated G-^mA(:T)-T-C sequence. We determined the crystal structures of SeqA_71–181 complexed with the mismatched and normal hemimethylated DNAs at 2.5 and 3.0 Å resolutions, respectively, and found that the mismatched ^mA:G base pair and the normal ^mA:T base pair are recognized by SeqA in a similar manner. Furthermore, in both crystal structures, an electron density is present near the unmethylated adenine, which is only methylated in the fully methylated state. This electron density, which may be due to a water molecule or a metal ion, can exist in the hemimethylated state, but not in the fully methylated state, because of steric clash with the additional methyl group.     

Crystal structure of a SeqA-N filament: implications for DNA replication and chromosome organization

Escherichia coli SeqA binds clusters of transiently hemimethylated GATC sequences and sequesters the origin of replication, oriC, from methylation and premature reinitiation. Besides oriC, SeqA binds and organizes newly synthesized DNA at replication forks. Binding to multiple GATC sites is crucial for the formation of stable SeqA-DNA complexes. Here we report the crystal structure of the oligomerization domain of SeqA (SeqA-N). The structural unit of SeqA-N is a dimer, which oligomerizes to form a filament. Mutations that disrupt filament formation lead to asynchronous DNA replication, but the resulting SeqA dimer can still bind two GATC sites separated from 5 to 34 base pairs. Truncation of the linker between the oligomerization and DNA-binding domains restricts SeqA to bind two GATC sites separated by one or two full turns. We propose a model of a SeqA filament interacting with multiple GATC sites that accounts for both origin sequestration and chromosome organization.     

Iterative Optimization of DNA Duplexes for Crystallization of SeqA-DNA Complexes

Escherichia coli SeqA is a negative regulator of DNA replication that prevents premature reinitiation events by sequestering hemimethylated GATC clusters within the origin of replication¹. Beyond the origin, SeqA is found at the replication forks, where it organizes newly replicated DNA into higher ordered structures². SeqA associates only weakly with single GATC sequences, but it forms high affinity complexes with DNA duplexes containing multiple GATC sites. The minimal functional and structural unit of SeqA is a dimer, thereby explaining the requirement of at least two GATC sequences to form a high-affinity complex with hemimethylated DNA³. Additionally, the SeqA architecture, with the oligomerization and DNA-binding domains separated by a flexible linker, allows binding to GATC repeats separated by up to three helical turns. Therefore, understanding the function of SeqA at a molecular level requires the structural analysis of SeqA bound to multiple GATC sequences. In protein-DNA crystallization, DNA can have none to an exceptional effect on the packing interactions depending on the relative sizes and architecture of the protein and the DNA. If the protein is larger than the DNA or footprints most of the DNA, the crystal packing is primarily mediated by protein-protein interactions. Conversely, when the protein is the same size or smaller than the DNA or it only covers a fraction of the DNA, DNA-DNA and DNA-protein interactions dominate crystal packing. Therefore, crystallization of protein-DNA complexes requires the systematic screening of DNA length⁴ and DNA ends (blunt or overhang)^5-7. In this report, we describe how to design, optimize, purify and crystallize hemimethylated DNA duplexes containing tandem GATC repeats in complex with a dimeric variant of SeqA (SeqAΔ(41-59)-A25R) to obtain crystals suitable for structure determination.     

Functional domains of the ubiquitous chromatin protein DEK

DEK was originally described as a proto-oncogene protein and is now known to be a major component of metazoan chromatin. DEK is able to modify the structure of DNA by introducing supercoils. In order to find interaction partners and functional domains of DEK, we performed yeast two-hybrid screens and mutational analyses. Two-hybrid screening yielded C-terminal fragments of DEK, suggesting that DEK is able to multimerize. We could localize the domain to amino acids 270 to 350 and show that multimerization is dependent on phosphorylation by CK2 kinase in vitro. We also found two DNA binding domains of DEK, one on a fragment including amino acids 87 to 187 and containing the SAF-box DNA binding motif, which is located between amino acids 149 and 187. This region is sufficient to introduce supercoils into DNA. The second DNA binding domain is located between amino acids 270 and 350 and thus overlaps the multimerization domain. We show that the two DNA-interacting domains differ in their binding properties and in their abilities to respond to CK2 phosphorylation.     

Structural insights into the cooperative binding of SeqA to a tandem GATC repeat

SeqA is a negative regulator of DNA replication in Escherichia coli and related bacteria that functions by sequestering the origin of replication and facilitating its resetting after every initiation event. Inactivation of the seqA gene leads to unsynchronized rounds of replication, abnormal localization of nucleoids and increased negative superhelicity. Excess SeqA also disrupts replication synchrony and affects cell division. SeqA exerts its functions by binding clusters of transiently hemimethylated GATC sequences generated during replication. However, the molecular mechanisms that trigger formation and disassembly of such complex are unclear. We present here the crystal structure of a dimeric mutant of SeqA [SeqAΔ(41–59)-A25R] bound to tandem hemimethylated GATC sites. The structure delineates how SeqA forms a high-affinity complex with DNA and it suggests why SeqA only recognizes GATC sites at certain spacings. The SeqA–DNA complex also unveils additional protein–protein interaction surfaces that mediate the formation of higher ordered complexes upon binding to newly replicated DNA. Based on this data, we propose a model describing how SeqA interacts with newly replicated DNA within the origin of replication and at the replication forks.     

Escherichia coli SeqA Structures Relocalize Abruptly upon Termination of Origin Sequestration during Multifork DNA Replication

The Escherichia coli SeqA protein forms complexes with new, hemimethylated DNA behind replication forks and is important for successful replication during rapid growth. Here, E. coli cells with two simultaneously replicating chromosomes (multifork DNA replication) and YFP tagged SeqA protein was studied. Fluorescence microscopy showed that in the beginning of the cell cycle cells contained a single focus at midcell. The focus was found to remain relatively immobile at midcell for a period of time equivalent to the duration of origin sequestration. Then, two abrupt relocalization events occurred within 2–6 minutes and resulted in SeqA foci localized at each of the cell’s quarter positions. Imaging of cells containing an additional fluorescent tag in the origin region showed that SeqA colocalizes with the origin region during sequestration. This indicates that the newly replicated DNA of first one chromosome, and then the other, is moved from midcell to the quarter positions. At the same time, origins are released from sequestration. Our results illustrate that newly replicated sister DNA is segregated pairwise to the new locations. This mode of segregation is in principle different from that of slowly growing bacteria where the newly replicated sister DNA is partitioned to separate cell halves and the decatenation of sisters a prerequisite for, and possibly a mechanistic part of, segregation.     

Biochemical and mutational analysis of EcoRII functional domains reveals evolutionary links between restriction enzymes

The archetypal Type IIE restriction endonuclease EcoRII is a dimer that has a modular structure. DNA binding studies indicate that the isolated C-terminal domain dimer has an interface that binds a single cognate DNA molecule whereas the N-terminal domain is a monomer that also binds a single copy of cognate DNA. Hence, the full-length EcoRII contains three putative DNA binding interfaces: one at the C-terminal domain dimer and two at each of the N-terminal domains. Mutational analysis indicates that the C-terminal domain shares conserved active site architecture and DNA binding elements with the tetrameric restriction enzyme NgoMIV. Data provided here suggest possible evolutionary relationships between different subfamilies of restriction enzymes.     

Solution structure of the DNA binding domain of AraC protein

We report the solution structure of the DNA binding domain of the Escherichia coli regulatory protein AraC determined in the absence of DNA. The 20 lowest energy structures, determined on the basis of 1507 unambiguous nuclear Overhauser restraints and 180 angle restraints, are well resolved with a pair wise backbone root mean square deviation of 0.7 Å. The protein, free of DNA, is well folded in solution and contains seven helices arranged in two semi‐independent sub domains, each containing one helix‐turn‐helix DNA binding motif, joined by a 19 residue central helix. This solution structure is discussed in the context of extensive biochemical and physiological data on AraC and with respect to the DNA‐bound structures of the MarA and Rob homologs. Proteins 2009. © 2009 Wiley‐Liss, Inc.     

SeqA protein aggregation is necessary for SeqA function.

The binding of SeqA protein to hemimethylated GATC sequences is important in the negative modulation of chromosomal initiation at oriC, and in the formation of SeqA foci necessary for Escherichia coli chromosome segregation. Using gel-filtration chromotography and glycerol gradient sedimentation, we demonstrate that SeqA exists as a homotetramer. SeqA tetramers are able to aggregate or multimerize in a reversible, concentration-dependent manner. Using a bacterial two-hybrid system, we demonstrate that the N-terminal region of SeqA, especifically the 9th amino acid residue, glutamic acid, is required for functional SeqA-SeqA interaction. Although the SeqA(E9K) mutant protein, containing lysine rather than glutamic acid at the 9th amino acid residue, exists as a tetramer, the mutant protein binds to hemimethylated DNA with altered binding patterns as compared with wild-type SeqA. Aggregates of SeqA(E9K) are defective in hemimethylated DNA binding. Here we demonstrate that proper interaction between SeqA tetramers is required for both hemimethylated DNA binding and formation of active aggregates. SeqA tetramers and aggregates might be involved in the formation of SeqA foci required for the segregation of chromosomal DNA as well as the regulation of chromosomal initiation.