Remodelling of the angular collagen fiber distribution in cardiovascular tissues

Understanding collagen fiber remodelling is desired to optimize the mechanical conditioning protocols in tissue-engineering of load-bearing cardiovascular structures. Mathematical models offer strong possibilities to gain insight into the mechanisms and mechanical stimuli involved in these remodelling processes. In this study, a framework is proposed to investigate remodelling of angular collagen fiber distribution in cardiovascular tissues. A structurally based model for collagenous cardiovascular tissues is extended with remodelling laws for the collagen architecture, and the model is subsequently applied to the arterial wall and aortic valve. For the arterial wall, the model predicts the presence of two helically arranged families of collagen fibers. A branching, diverging hammock-type fiber architecture is predicted for the aortic valve. It is expected that the proposed model may be of great potential for the design of improved tissue engineering protocols and may give further insight into the pathophysiology of cardiovascular diseases.     

Biomechanical study using fuzzy systems to quantify collagen fiber recruitment and predict creep of the rabbit medial collateral ligament

In normal daily activities, ligaments are subjected to repeated loads, and respond to this environment with creep and fatigue. While progressive recruitment of the collagen fibers is responsible for the toe region of the ligament stress-strain curve, recruitment also represents an elegant feature to help ligaments resist creep. The use of artificial intelligence techniques in computational modeling allows a large number of parameters and their interactions to be incorporated beyond the capacity of classical mathematical models. The objective of the work described here is to demonstrate a tool for modeling creep of the rabbit medial collateral ligament that can incorporate the different parameters while quantifying the effect of collagen fiber recruitment during creep. An intelligent algorithm was developed to predict ligament creep. The modeling is performed in two steps: first, the ill-defined fiber recruitment is quantified using the fuzzy logic. Second, this fiber recruitment is incorporated along with creep stress and creep time to model creep using an adaptive neurofuzzy inference system. The model was trained and tested using an experimental database including creep tests and crimp image analysis. The model confirms that quantification of fiber recruitment is important for accurate prediction of ligament creep behavior at physiological loads.     

Layer-dependent role of collagen recruitment during loading of the rat bladder wall

In this work, we re-evaluated long-standing conjectures as to the source of the exceptionally large compliance of the bladder wall. Whereas these conjectures were based on indirect measures of loading mechanisms, in this work we take advantage of advances in bioimaging to directly assess collagen fibers and wall architecture during biaxial loading. A custom biaxial mechanical testing system compatible with multiphoton microscopy was used to directly measure the layer-dependent collagen fiber recruitment in bladder tissue from 9 male Fischer rats (4 adult and 5 aged). As for other soft tissues, the bladder loading curve was exponential in shape and could be divided into toe, transition and high stress regimes. The relationship between collagen recruitment and loading curves was evaluated in the context of the inner (lamina propria) and outer (detrusor smooth muscle) layers. The large extensibility of the bladder was found to be possible due to folds in the wall (rugae) that provide a mechanism for low resistance flattening without any discernible recruitment of collagen fibers throughout the toe regime. For more extensible bladders, as the loading extended into the transition regime, a gradual coordinated recruitment of collagen fibers between the lamina propria layer and detrusor smooth muscle layer was found. A second important finding was that wall extensibility could be lost by premature recruitment of collagen in the outer wall that cut short the toe region. This change was correlated with age. This work provides, for the first time, a mechanistic understanding of the role of collagen recruitment in determining bladder extensibility and capacitance.     

Mechanical recruitment of N- and C-crosslinks in collagen type I

Collagen type I is an extracellular matrix protein found in connective tissues such as tendon, ligament, bone, skin, and the cornea of the eyes, where it functions to provide tensile strength; it also serves as a scaffold for cells and other extracellular matrix components. A single collagen type I molecule is composed of three amino acid chains that form a triple helix for most of the molecule's length; non-triple-helical extensions called N- and C-telopeptides are located at the amino/N-terminal and carboxy/C-terminal ends of the molecule, respectively. In two of the three chains, the C-telopeptide has been reported to possess a hair-pin/hook conformation, while the three N-telopeptides display a more extended structure. These telopeptides are crucial for the formation of enzymatic covalent crosslinks that form in collagens near their N- and C-ends. Such crosslinks provide structural integrity, strength, and stiffness to collagenous tissues. However, deformation mechanisms of N- and C-crosslinks and functional roles for the N- and C-telopeptide conformations are not yet well known. By performing molecular dynamics simulations, we demonstrated that two dehydro-hydroxylysino-norleucine crosslinks, positioned at the N- and C-crosslinking sites, exhibited a two-stage response to the mechanical deformation of their parent molecules. We observed that the N-crosslink served as the first responder to mechanical deformation, followed by the C-crosslink. The results of our simulations suggest a mechanical recruitment mechanism for N- and C-crosslinks. Understanding this mechanism will be crucial for the development of larger-scale predictive models of the mechanical behavior of native collagenous tissues, engineered tissues, and collagen-based materials.     

Optical characterization of orientation of collagen

The optical properties of reconstituted collagen were characterized in the frame-work of a two-phase model. The total birefringence is assumed to be the sum of form birefringence Δ_F, of amorphous birefringence Δ_a, and of crystalline birefringence Δ_c. The contribution of Δ_F has been determined as a function of strain. The intrinsic values of Δ_c and Δ_a were calculated to be 0.24 ± 0.06 and 0.055 ± 0.018, respectively. In the undeformed state, the observed birefringence is almost entirely due to the distortion of the electric field of the light at the phase boundary. Whereas there is a slight increase of form birefringence with increasing strain, the total birefringence shows much larger increments. The latter is attributable to orientation of the rodlike superstructures of the tropocollagen molecules.     

Stress-driven collagen fiber remodeling in arterial walls

A stress-driven model for the relation between the collagen morphology and the loading conditions in arterial walls is proposed. We assume that the two families of collagen fibers in arterial walls are aligned along preferred directions, located between the directions of the two maximal principal stresses. For the determination of these directions an iterative finite element based procedure is developed. As an example the remodeling of a section of a human common carotid artery is simulated. We find that the predicted fiber morphology correlates well with experimental observations. Interesting outcomes of the model including local shear minimization and the possibility of axial compressions due to high blood pressure are revealed and discussed. In memory of Zinaida Hariton, 1926–2002     

Interactions between collagen chains and fiber formation

The temperature-dependent dissociation of neutral salt-soluble collagen into its component chains was measured in 0.6–1.6 M urea solutions at pH 7.3. The temperature-dependent association of the same radiocactively labeled collagen into fibers was measured in 0–0.4 M urea solutions, pH 7.3. The effect of urea on the temperature, Tm(G), for half dissociation into chains was small, and the value extrapolated to zero urea concentration was 39°C. In contrast, the effect of urea on the temperature, Tm(F), for half association into fibers was large, and the value at zero urea concentration was 30°C. We conclude that while body temperature provides excellent conditions for the matching of collagen chains to form molecules, the conditions are not optimal for the formation of highly ordered fibers. The large effects of 0.1 M urea suggest that other factors in vivo may help to destabilize mismatched molecular association during fiber growth. Alternately this might be facilitated by parts of the extension peptides of procollagen.     

人胎盘中胶原蛋白的提取和表征

采用碱-酶结合法以人胎盘为原料提取胶原蛋白,并使用原子力显微镜(AFM)、差示扫描量热仪(DSC)、圆二色光谱(CD)和傅立叶变换红外光谱(FTIR)对所得胶原蛋白产品进行表征。结果表明:此工艺路线的胶原蛋白得率高,达到0.102%;提取时间由48 h以上减少到24 h以内,而且所得胶原蛋白分子完整地保留了其螺旋纤维结构。此法是从人胎盘中提取胶原蛋白的一种行之有效的方法。     

Impact of tissue preservation on collagen fiber architecture

Microarchitectural features of collagen-rich extracellular matrices provide the mechanical foundation for tissue function and exhibit topographical cues that influence cellular behavior including proliferation, migration and protein expression. Preservation of tissue microarchitecture is required for accurate evaluation of tissue characteristics and pathology. It is unclear whether common tissue preservation methods possess equal ability to preserve microarchitecture. We investigated collagen microarchitecture in samples that had been flash frozen, fixed in formalin or preserved in RNAlater®, and which contained both collagen-rich and collagen-sparse regions. Fibrillar collagen organization was characterized using picrosirius red staining and second harmonic generation (SHG) microscopy. Maintenance of collagen fiber characteristics compared to the gold standard of flash freezing depended on both the method of preservation and the local collagen content of the tissue. Both formalin fixation and RNAlater® preserved collagen fiber characteristics similar to flash freezing in collagen-rich areas of the tissue, but not in collagen-sparse regions. Analysis using picrosirius red staining indicated preservation-dependent changes in overall tissue architecture and suprafibrillar organization. Together with considerations of cost, ease of use, storage conditions and ability to use the preserved tissue for RNA or protein analysis, our quantitative characterization of the effects of preservation method on collagen microarchitecture may help investigators select the most appropriate preservation approach for their needs.     

Improved prediction of the collagen fiber architecture in the aortic heart valve

Living tissues show an adaptive response to mechanical loading by changing their internal structure and morphology. Understanding this response is essential for successful tissue engineering of load-bearing structures, such as the aortic valve. In this study, mechanically induced remodeling of the collagen architecture in the aortic valve was investigated. It was hypothesized that, in uniaxially loaded regions, the fibers aligned with the tensile principal stretch direction. For biaxial loading conditions, on the other hand, it was assumed that the collagen fibers aligned with directions situated between the principal stretch directions. This hypothesis has already been applied successfully to study collagen remodeling in arteries. The predicted fiber architecture represented a branching network and resembled the macroscopically visible collagen bundles in the native leaflet. In addition, the complex biaxial mechanical behavior of the native valve could be simulated qualitatively with the predicted fiber directions. The results of the present model might be used to gain further insight into the response of tissue engineered constructs during mechanical conditioning.     

Red cell distribution and the recruitment of pulmonary diffusing capacity.

The distribution of red blood cells in alveolar capillaries is typically nonuniform, as shown by intravital microscopy and in alveolar tissue fixed in situ. To determine the effects of red cell distribution on pulmonary diffusive gas transport, we computed the uptake of CO across a two-dimensional geometric capillary model containing a variable number of red blood cells. Red blood cells are spaced uniformly, randomly, or clustered without overlap within the capillary. Total CO diffusing capacity (DLCO) and membrane diffusing capacity (DmCO) are calculated by a finite-element method. Results show that distribution of red blood cells at a fixed hematocrit greatly affects capillary CO uptake. At any given average capillary red cell density, the uniform distribution of red blood cells yields the highest DmCO and DLCO, whereas the clustered distribution yields the lowest values. Random nonuniform distribution of red blood cells within a single capillary segment reduces diffusive CO uptake by up to 30%. Nonuniform distribution of red blood cells among separate capillary segments can reduce diffusive CO uptake by >50%. This analysis demonstrates that pulmonary microvascular recruitment for gas exchange does not depend solely on the number of patent capillaries or the hematocrit; simple redistribution of red blood cells within capillaries can potentially account for 50% of the observed physiological recruitment of DLCO from rest to exercise.     

Advanced glycation end-products diminish tendon collagen fiber sliding

Connective tissue aging and diabetes related comorbidity are associated with compromised tissue function, increased susceptibility to injury, and reduced healing capacity. This has been partly attributed to collagen cross-linking by advanced glycation end-products (AGEs) that accumulate with both age and disease. While such cross-links are believed to alter the physical properties of collagen structures and tissue behavior, existing data relating AGEs to tendon mechanics is contradictory. In this study, we utilized a rat tail tendon model to quantify the micro-mechanical repercussion of AGEs at the collagen fiber-level. Individual tendon fascicles were incubated with methylglyoxal (MGO), a naturally occurring metabolite known to form AGEs. After incubation in MGO solution or buffer only, tendons were stretched on the stage of a multiphoton confocal microscope and individual collagen fiber stretch and relative fiber sliding were quantified. Treatment by MGO yielded increased fluorescence and elevated denaturation temperatures as found in normally aged tissue, confirming formation of AGEs and related cross-links. No apparent ultrastructural changes were noted in transmission electron micrographs of cross-linked fibrils. MGO treatment strongly reduced tissue stress relaxation (p < 0.01), with concomitantly increased tissue yield stress (p < 0.01) and ultimate failure stress (p = 0.036). MGO did not affect tangential modulus in the linear part of the stress–strain curve (p = 0.46). Microscopic analysis of collagen fiber kinematics yielded striking results, with MGO treatment drastically reducing fiber-sliding (p < 0.01) with a compensatory increase in fiber-stretch (p < 0.01). We thus conclude that the main mechanical effect of AGEs is a loss of tissue viscoelasticity driven by matrix-level loss of fiber–fiber sliding. This has potentially important implications to tissue damage accumulation, mechanically regulated cell signaling, and matrix remodeling. It further highlights the importance of assessing viscoelasticity – not only elastic response – when considering age-related changes in the tendon matrix and connective tissue in general.     

重组人源性胶原蛋白的制备及表征

为了获得可实现工业化生产的重组人源性胶原蛋白,根据人I型胶原蛋白Gly-X-Y序列,优选亲水性的Gly-X-Y胶原肽段设计人源性胶原蛋白氨基酸序列及对应的核苷酸序列,利用酶切技术构建pPIC9K-COL表达载体,电转化毕赤酵母获得人源性胶原蛋白毕赤酵母工程菌,并对其进行发酵罐发酵、纯化及鉴定。结果显示,获得表达量达4.5 g/L,纯度大于95%的人源性胶原蛋白,经氨基酸N端测序、分子量测定、氨基酸分析及胶原酶降解试验,确定获得的蛋白与理论的人源性胶原蛋白一级结构一致;同时胶原经冷冻干燥后进行扫描电镜分析及细胞毒性试验,确定人源性胶原蛋白冻干品具有多孔纤维网状结构及优良的细胞相容性,预示其具备作为生物医学材料的潜质。