Fabrication and Characterization of Native and Oxidized Potato Starch Biodegradable Films

The need to replace conventional polymers due to environmental pollution caused by them has led to increased production of biodegradable polymers such as starch. Thus, the application possibilities of starch have increased. In this study, we produced and characterized biodegradable films derived from native and oxidized potato starch. The film-forming solution was prepared with different concentrations of extracted starch (native or oxidized) and a plasticizer (glycerol or sorbitol). Then, the mechanical, barrier, morphological, and structural properties of the films were characterized. The moisture content of the films varied from 15.35?±?1.31 to 21.78?±?0.49%. The elastic modulus of the films ranged from 219?±?14.97 to 2299?±?62.91 MPa. The film of oxidized starch plasticized with sorbitol in the lowest content was the most resistant and flexible; moreover, this film also presented lower water vapor permeability and low solubility in water. Fourier-transform infrared spectroscopic analysis of the biodegradable films indicated the presence of same functional groups as those of starch with bands in the same regions. The film thickness was lower for the films plasticized with glycerol whereas the color variation (Δ?) was lower for the ones plasticized with sorbitol. In case of both plasticizers, the increase in their content decreased the Δ? value. All the biodegradable films presented stability against water absorption owing to their low solubility in water. Morphological evaluation revealed the presence of partially gelatinized starch granules in the films. The roughness parameter (Rq) of the films varied from 3.39 to 10.9 nm, indicating that their surfaces are smooth. X-ray diffraction studies showed a B-type pattern for the starches, which is representative of tubers. Further, the films present higher relative crystallinity (RC) compared to the starches. The biodegradable starch films are uniform, transparent and with low solubility in water. The oxidation of starch and use of sorbitol as a plasticizer resulted in improved properties of the starch films, which is suitable for application.     

Influence of amylose content on starch films and foams

After extraction of smooth pea starch and waxy maize starch from pure amylose and amylopectin fractions, films with various amylose contents were prepared by casting in the presence of water or water with glycerol. For unplasticized films, a continuous increase in tensile strength (40–70 MPa) and elongation (4–6%) was observed as amylose increased from 0 to 100%. Discrepancies with values obtained for native starches with variable amylose content and different botanical origins were attributable to variations in the molecular weights of components. Taking cell wall properties into account, the values obtained in the laboratory were used to improve the relation between the flexural behavior of extruded foams and the model of cellular solids with open cavities.

The properties of plasticized films were not improved by the presence of glycerol and remained constant when amylose content was higher than 40%. Results are interpreted on the basis of topological differences between amylose and amylopectin.     

The effects of amylose content on the molecular size of amylose, and on the distribution of amylopectin chain length in maize starches

The amylose to amylopectin ratios in six maize starch samples of differing amylose contents were measured by enzymatic debranching, followed by high performance size exclusion chromatography (HPSEC). The molecular size of amyloses, estimated by -log K_wav, shows progressive decrease with the increase in amylose content in maize starches. The gel permeation chromatographs of the corresponding amylopectins, debranched with isoamylase, showed bimodal distributions containing long and short chains. The average chain length of amylopectin has a correlation with amylose content. The correlation coefficients between amylose content and average chain length, long chain length, weight ratio and the mole ratio of long and short chain length, were 0.97, 0.92, 0.96, 0.94 respectively. The maize starch with the highest amylose content has the lowest amylose molecular size and the longest chains, with a high ratio of long to short chains in its amylopectin fraction. Comparing the values of amylose content determined by HPSEC of starch or debranched starch with those of the iodinecomplex method, we conclude that long chains of amylopectin in high amylose starches contribute significantly to apparent amylose content.     

Chemical and physical properties of ginkgo (Ginkgo biloba) starch

Starch isolated from mature Ginkgo biloba seeds and commercial normal maize starches were subjected to α-amylolysis and acid hydrolysis. Ginkgo starch was more resistant to pancreatic α-amylase hydrolysis than the normal maize starch. The chain length distribution of debranched amylopectin of the starches was analyzed by using high performance anion-exchange chromatography equipped with an amyloglucosidase reactor and a pulsed amperometric detector. The chain length distribution of ginkgo amylopectin showed higher amounts of both short and long chains compared to maize starch. Naegeli dextrins of the starches prepared by extensive acid hydrolysis over 12 days demonstrated that ginkgo starch was more susceptible than normal maize to acid hydrolysis. Ginkgo dextrins also demonstrate a lower concentration of singly branched chains than maize dextrins, and unlike maize dextrin, debranched ginkgo shows no multiple branched chains. The ginkgo starch displayed a C-type X-ray diffraction pattern, compared to an A-type pattern for maize. Ginkgo starch and maize starch contained 24.0 and 17.6% absolute amylose contents, respectively.     

Fermentation of native and processed starches by the porcine caecal anaerobe Clostridium butyricum (NCIMB 7423)

Starch fermentation by the porcine caecal anaerobe Clostridium butyricum was examined using gas and volatile fatty acid production as determinants of activity. Potato starch and amylopectin were studied in their native form as well as after retrogradation, which should render them resistant to pancreatic α-amylase digestion. Fermentation of both substrates was enhanced by pancreatin digestion of the native material, possibly due to the removal or disruption of part of the structure of the starch by the pancreatic enzymes. However, pancreatic digestion of retrograded potato starch apparently reduced the amount available for bacterial fermentation, whereas no significant effect was observed with amylopectin. The data suggests that starches which are high in amylopectin would be more likely to influence fermentation in the large intestine in monogastric animals, and that the presence of residual pancreatic enzymes in the lower gut could potentially enhance starch fermentation by this micro-organism.     

Damaged starch characterisation by ultracentrifugation

The relative molecular size distributions of a selection of starches (waxy maize, pea and maize) that had received differing amounts of damage from ball milling (as quantified by susceptibility to alpha-amylase) were compared using analytical ultracentrifugation. Starch samples were solubilised in 90% dimethyl sulfoxide, and relative size distributions were determined in terms of the apparent distribution of sedimentation coefficients g*(s) versus s(20,w). For comparison purposes, the sedimentation coefficients were normalised to standard conditions of density and viscosity of water at 20 degrees C, and measurements were made with a standard starch loading concentration of 8 mg/mL. The modal molecular size of the native unmilled alpha-glucans were found to be approximately 50S, 51S and 79S for the waxy maize, pea and maize amylopectin molecules, respectively, whilst the pea and maize amylose modal molecular sizes were approximately 14S and approximately 12S, respectively. As the amount of damaged starch increased, the amylopectin molecules were eventually fragmented, and several components appeared, with the smallest fractions approaching the sedimentation coefficient values of amylose. For the waxy maize starch, the 50S material (amylopectin) was gradually converted to 14S, and the degradation process included the appearance of 24S material. For the pea starch, the situation was more complicated than the waxy maize due to the presence of amylose. As the amylopectin molecules (51S) were depolymerised by damage within this starch, low-molecular-weight fragments added to the proportion of the amylose fraction (14S)--although tending towards the high-molecular-weight region of this fraction. As normal maize starch was progressively damaged, a greater number of fragments appeared to be generated compared to the other two starches. Here, the 79S amylopectin peak (native starch) was gradually converted into 61 and 46S material and eventually to 11S material with a molecular size comparable to amylose. Amylose did not appear to be degraded, implying that all the damage was focused on the amylopectin fraction in all three cases. Specific differences in the damage profiles for the pea and maize starches may reflect the effect of lipid-complexed amylose in the maize starch.     

Film forming capacity of chemically modified corn starches

Native starch can be chemically modified to improve its functionality and to expand its uses. Modified starches were characterized and the rheological behavior of filmogenic suspensions was analyzed. The film forming capacity of different chemical modified corn starches was evaluated. Acetylated starch was selected by the characteristics of the resulted films; its optimum concentration was 5% w/w since their films exhibited the lowest water vapor permeability (WVP, 1.26 × 10⁻¹⁰ g/m s Pa). The effect of glycerol as plasticizer on film properties depend on its concentration, being 1.5% w/w those that allows to obtain the lowest WVP value (1.64 × 10⁻¹¹ g/m s Pa), low film solubility in water and a more compact structure than those of unplasticized films. Mechanical behavior of plasticized acetylated starch films depends on glycerol concentration, being rigid and brittle the unplasticized ones, ductile those containing 1.5% w/w of glycerol and very flexible those with a higher plasticizer content.     

Development of a low glycemic maize starch: preparation and characterization

A low glycemic index starch was developed by partial alpha-amylase treatment, and its fine structure responsible for slowly digestible and resistant properties was investigated. Different digestion rates were obtained for gelatinized, retrograded starch by varying the enzyme dosage and reaction time. Analysis by high performance size-exclusion chromatography (HPSEC) coupled with multiangle laser-light scattering indicated that the molecular weighs of amylopectin and amylose were reduced during the digestion, to less than 100 kDa. A debranched chain length study using high performance anion-exchange chromatography equipped with an amyloglucosidase reactor and a pulsed amperometric detector and HPSEC revealed that short chains of amylopectin and noncrystalline amylose were rapidly digested, while DPn 121 chains showed resistance, followed by DPn 46 chains. X-ray diffraction analysis revealed that the crystalline structure in the treated starches survived cooking. These starches not only have slowly digestible and resistant character, but also retain some branched structure for adequate functionality.     

Effect of acid–alcohol treatment on the molecular structure and physicochemical properties of maize and potato starches

The molecular structure and physicochemical properties of acid–alcohol treated maize and potato starches (0.36% HCl in methanol at 25 °C for 1–15 days) were investigated. The yields of the modified starches were ranging from 91 to 100%. The average granule size of modified starches decreased slightly. The solubility of starches increased with the increase of treatment time, and the pasting properties confirmed the high solubility of modified starches. The gelatinization temperatures and range of gelatinization increased with the increase of treatment time except T_o (onset temperature) of maize starch. Molecular structures of modified starches suggested the degradation of starches occurred mostly within the first 5 days of treatment, and degradation rate of potato starch was higher than maize starch both in amylopectin and in amylose. Maize starch was found less susceptible to acid–alcohol degradation than potato starch.     

Retrograded starches as potential anodes in lithium-ion rechargeable batteries

Retrograded starch is a crystal formed by starch molecules with hydrogen bonds. Many literatures have reported its physicochemical character, but its crystal structure is so far unclear. As we isolate amylose and amylopectin from retrograded maize, sweet potato and potato starches in 4.0M KOH solutions and make them retrograde alone in neutral solution (adjusted by HCl) to form crystal, a new phenomenon appears, crystals of KCl do not appear in retrograded potato amylose, potato amylopectin, and maize amylose, indicating that those crystals may absorb K(+) and (or) Cl(-), and those ions probably act with aldehyde of starch or hydroxy of fatty acid attached in starch, such characteristic may make retrograded starches replace graphite as anode with high-capacity in lithium-ion rechargeable batteries.     

Production of very-high-amylose potato starch by inhibition of SBE A and B

High-amylose starch is in great demand by the starch industry for its unique functional properties. However, very few high-amylose crop varieties are commercially available. In this paper we describe the generation of very-high-amylose potato starch by genetic modification. We achieved this by simultaneously inhibiting two isoforms of starch branching enzyme to below 1% of the wild-type activities. Starch granule morphology and composition were noticeably altered. Normal, high-molecular-weight amylopectin was absent, whereas the amylose content was increased to levels comparable to the highest commercially available maize starches. In addition, the phosphorus content of the starch was increased more than fivefold. This unique starch, with its high amylose, low amylopectin, and high phosphorus levels, offers novel properties for food and industrial applications.     

Resistant glutarate starch from adlay: Preparation and properties

Reaction conditions were optimized to increase the content of resistant starch in adlay starch using esterification with glutaric acid, and the physicochemical properties of the prepared glutarate starches were investigated. Different amounts of glutaric acid (0.1–0.5 g/g starch, dry weight basis) were reacted with adlay starch at various temperatures (70–130 °C) and reaction times (3–9 h). The resistant starch levels increased with increased glutaric acid content, reaction temperature, and reaction time. The color difference was mainly affected by reaction time. The highest resistant starch content (RS 66%) was obtained using conditions of 0.4 g glutaric acid/g starch, 115 °C, and 7.5 h, with a color difference of 10.24. After digestion with α-amylase and amyloglucosidase, the water-soluble fraction of glutarate starch had more oligosaccharides than high-amylose maize starch (RS 43%). FT-IR and solid-state NMR detected carbonyl groups in the glutarate starch, indicating the formation of cross-linkages through esterification. The granular structure of the glutarate starches was not destroyed and they retained birefringence. After heating with an excess of water, the granules kept their shape but lost their birefringence. The glutarate starches had low solubility in both cold and hot water, and the resistant starch contents were unchanged after heating due to the restriction of swelling by cross-linking. The glutarate starches had a similar chain-length distribution to raw starch, indicating that acid hydrolysis took place at branching points in the amorphous region. Furthermore, the glutarate starches possessed a weaker crystalline region, more diverse double helical chains, and lower enthalpy than raw starch.     

Slow digestion property of native cereal starches

The slow digestion property of native cereal starches, represented by normal maize starch, was investigated. The in vitro Englyst test showed that 53.0% of the maize starch is slowly digestible starch (SDS), and scanning electron microscopy (SEM) revealed that SDS starts from an increase of pore size until almost complete fragmentation of starch granules. However, similar amounts of SDS ( approximately 50%) were shown for partially digested fragmented starch residuals, which would normally be considered resistant to digestion based on the Englyst assay. Molecularly, both amylopectin (AP) and amylose (AM) contributed to the amount of SDS as evidenced by a similar ratio of AP to AM at different digestion times. Consistently, similar degrees of crystallinity, comparable gelatinization behavior, and similar debranched profiles of starch residuals following different digestion times indicated that the crystalline and amorphous regions of starch granules were evenly digested through a mechanism of side-by-side digestion of concentric layers of semicrystalline shells of native starch granules.     

Determination of the botanical origin of starch using direct potentiometry and PCA

A new approach for the determination of the botanical origin of starch is presented based on the formation of starch-triiodide complexes. The starch samples were extracted from wheat (Srpanjka), potato, maize, rye (Barun), barley (Conduct), rice, tapioca and a commercial modified starch. The amylose/amylopectin ratios of starches, among various other properties, differ between starches of different botanical origins. Triiodide ions bind characteristically to the amylose and amylopectin of the starch depending on the starch's origin. The new technique includes direct potentiometric measurements of the response of free triiodide ions in starch-triiodide solutions where the data is analysed by principal component analysis (PCA). PCA gave graphical results for statistical differentiation between starches of different botanical origins.     

Scanning Electron Microscopy and Fermentation Studies on Selected Known Maize Starch Mutants Using STARGEN? Enzyme Blends

The conversion of maize (corn) kernels to bio-ethanol is an energy-intensive process involving many stages. One step typically required is the liquefaction of the ground kernel to enable enzyme hydrolysation of the starch to glucose. The enzyme blends STARGEN? (Genencor) are capable of hydrolysing starch granules without liquefaction, reducing energy inputs and increasing efficiency. Studies were conducted on maize starch mutants amylose extender 1 (ae1), dull 1 (du1) and waxy 1 (wx1) in the inbred line Oh43 to determine whether different maize starches affected hydrolysation rates by STARGEN? 001 and STARGEN? 002. All mutants contained similar proportions of starch in the kernel but varied in the amylose to amylopectin ratio. Ground maize kernels were incubated with STARGEN? 001 and viewed using scanning electron microscopy to examine the hydrolysis action of STARGEN? 001 on the starch granules. The ae1 mutant exhibited noticeably less enzymic hydrolysis action, on the granules visualised, than wx1 and background line Oh43. Kernels were batch-fermented with STARGEN? 001 and STARGEN? 002. The ae1 mutant exhibited a 50% lower ethanol yield compared to the wx1 mutant and background line. A final study compared hydrolysation rates of STARGEN? 001 and STARGEN? 002 on purified maize starch, amylopectin and amylose. Though almost twice the amylopectin was hydrolysed using STARGEN? 002 than STARGEN? 001 in this trial, fermentations using STARGEN? 002 resulted in lower ethanol yields than fermentations using STARGEN? 001. Both STARGEN? enzyme blends were more suitable for the fermentation of high amylopectin maize starches than high amylose starches.     

Structural characteristics and physicochemical properties of oxidized corn starches varying in amylose content

The effects of amylose content on the extent of oxidation and the distribution of carboxyl groups in hypochlorite-oxidized corn starches were investigated. Corn starches including waxy corn starch (WC), common corn starch (CC), and 50% and 70% high-amylose corn starches (AMC) were oxidized with NaOCl at three concentrations (0.8%, 2%, and 5%). Carboxyl and carbonyl content of oxidized starches increased with increasing NaOCl concentration. High-AMC (70%) had slightly higher carboxyl and carbonyl contents at 0.8% NaOCl, whereas WC had significantly higher carboxyl and carbonyl contents at 2% and 5% NaOCl levels. Carbohydrate profiles by high-performance size-exclusion chromatography indicate that amylose was more susceptible to depolymerization than amylopectin. Degradation of amylopectin long chains (DP >24) was more pronounced in WC and CC than in AMCs. The crystalline lamellae of WC started to degrade at 2% NaOCl, but those of the other corn starches remained intact even at 5% NaOCl level according to X-ray crystallinity. By using anion-exchange chromatography for separation and size-exclusion chromatography for characterization, carboxyl groups were found to be more concentrated on amylopectin than on amylose, particularly in AMCs. Oxidation decreased gelatinization temperature and enthalpy with WC showing the most decrease and 70% AMC showing the least. The gelatinization enthalpy of 50% AMC decreased significantly faster than those of CC and 70% AMC after 0.8% oxidation. Retrogradation of amylopectin slightly increased after oxidation with increasing oxidation level. The peak viscosities of oxidized WC and CC were higher than those of their native counterparts at 0.8% NaOCl, but this increase was not observed in AMCs. The setback viscosities of 2% NaOCl-oxidized 50% and 70% AMCs were much higher than those of the unmodified counterparts. The extent of oxidation and physicochemical properties of oxidized starches varied greatly with the amylase:amylopectin ratio of corn starches. Amylose was suggested to play an important role in controlling the oxidation efficiency.     

Super-absorbent polymers from starch-polyacrylonitrile graft copolymers by acid hydrolysis before saponification

Graft copolymers (SPAN) of polyacrylonitrile (PAN) onto starch were prepared from gelatinized starch varieties with ammonium ceric nitrate as an initiator. The molecular weight of the PAN branches increased for the varieties of starches in the order high amylose maize starch < maize starch < waxy maize starch. SPAN samples were saponified with aqueous NaOH, and the aqueous solution of the resulting polymer (HSPAN) was cast into film in a forced-air oven at 35°C. The water absorbency of the HSPAN film formed from waxy maize starch was the highest (1200 g H₂O (g dry sample)⁻¹) and that from high amylose maize starch was the lowest (530 g g⁻¹). SPAN samples from maize starch were partially hydrolyzed with dilute hydrochloric acid. The resulting polyacrylonitriles with low molecular weight starch end groups (LSPAN) were also saponified. The resulting saponified product (HLSPAN) was cast into film. The absorbencies of HLSPAN films were found to be far larger (up to 6000 g g⁻¹) than those of the corresponding HSPAN films. The absorbency increased with increasing molecular weight of PAN in the initial SPAN up to a molecular weight of 1−1·5 × 10⁶. The absorbency decreased significantly when HSPAN and HLSPAN films were subjected to heat treatment at 135°C or above. The crosslinks present in HSPAN and HLSPAN films prepared at 35°C and those formed during heat treatment were considered to have different structures: the former formed between carbohydrate alkoxide ions and nitrile groups at the early stages of saponification and the latter formed between carbohydrate and copoly(acrylate-acrylamide) chains and/or between copoly(acrylate-acrylamide) chains.     

Internal structure and physicochemical properties of corn starches as revealed by chemical surface gelatinization

The organization of amylose and amylopectin within starch granules is still not well elucidated. This study investigates the radial distribution of amylose and amylopectin in different corn starches varying in amylose content (waxy corn starch (WC), common corn starch (CC), and 50% and 70% amylose corn starches (AMC)). Corn starches were surface gelatinized by 13 M LiCl at room temperature to different extents (approximately 10%, 20%, 30%, and 40%). The gelatinized surface starch and remaining granules were characterized for amylose content, amylopectin chain-length distribution, thermal properties, swelling power (SP), and water solubility index (WSI). Except for the outmost 10% layer, the amylose content in CC increased slightly with increasing surface removal. In contrast, amylose was more concentrated at the periphery than at the core for 50% and 70% AMC. The proportion of amylopectin A chains generally decreased while that of B1 chains generally increased with increasing surface removal for all corn starches. The gelatinization enthalpy usually decreased, except for 70% AMC, whereas the retrogradation enthalpy relatively remained unchanged for CC but increased for WC, 50% and 70% AMC with increasing surface removal. The SP and WSI increased with increasing surface removal for all corn starches, with WC showing a significant increase in SP after the removal of the outmost 10% layer. The results of this study indicated that there were similarities and differences in the distribution of amylose and amylopectin chains along the radial location of corn starch granules with varying amylose contents. More amylose-lipid complex and amylopectin long chains were present at the periphery than at the core for amylose-containing corn starches.     

Effect of annealing and pressure on microstructure of cornstarches with different amylose/amylopectin ratios

This work focuses on the effect of annealing and pressure on microstructures of starch, in particular the crystal structure and crystallinity to further explore the mechanisms of annealing and pressure treatment. Cornstarches with different amylose/amylopectin ratios were used as model materials. Since the samples covered both A-type (high amylopectin starch: waxy and maize) and B-type (high amylose starch: G50 and G80) crystals, the results can be used to clarify some previous confusion. The effect of annealing and pressure on the crystallinity and double helices were investigated by X-ray diffraction (XRD) and ¹³C CP/MAS NMR spectroscopy. The crystal form of various starches remained unchanged after annealing and pressure treatment. XRD detection showed that the relative crystallinity (RC) of high amylopectin starches was increased slightly after annealing, while the RC of high amylose-rich starches remained unchanged. NMR measurement supported the XRD results. The increase can be explained by the chain relaxation. XRD results also indicated that some of the fixed region in crystallinity was susceptible to outside forces. The effect of annealing and pressure on starch gelatinization temperature and enthalpy are used to explore the mechanisms.     

Effects of an added inclusion-amylose complex on the retrogradation of some starches and amylopectin

The effects of added cetyltrimethylammonium bromide (CTAB)-amylose complex on retrogradation of some starches (waxy-maize, maize, and potato starch) and on amylopectin from potato have been studied by differential scanning calorimetry (DSC). The starches and amylopectin samples with added CTAB-amylose complex received four different heat treatments prior to storage and DSC measurements that either melted the complex or left the complex intact. The calorimetry measurements showed that intact CTAB-amylose complex had much less effect on decreasing the retrogradation of the starches and the amylopectin than samples with melted complex prior to measurements. This is discussed in relation to possible complex formation of amylopectin and lipids and the effects of adding uncomplexed lipids on the retrogradation of waxy starches and amylopectin.