线虫PCR:直接针对秀丽线虫进行PCR扩增基因组DNA的新方法

目的:直接针对秀丽线虫进行PCR反应,以便快速扩增基因组DNA,从而提高钓取目的基因和鉴定基因组是否发生突变的效率.方法:根据生物信息学分析,针对不同基因设计单重或多重PCR引物;在不含砌DNA聚合酶的PCR反应体系中加入蛋白酶K消化秀丽线虫染色体中的组蛋白,然后加入Taq酶,直接针对野生型或突变型秀丽线虫个体进行PC...     

Detection of Escherichia coli in sewage and sludge by polymerase chain reaction.

A method in which the polymerase chain reaction (PCR) was used was developed to amplify either a uidA gene fragment or a 16S rRNA gene fragment from Escherichia coli in sewage and sludge. Because of interference caused by humic acidlike substances, crude DNA extracts were purified with a Sephadex G-200 spun column before the PCR was begun. A Southern analysis in which a nonradioactive chemiluminescent method was used was performed to confirm the presence of PCR products. The sensitivity of detection for PCR products when the chemiluminescent method was used was determined to be 30 ag of E. coli genomic DNA template. In seeded sludge, the PCR amplified the target DNA from 80 E. coli cells per g of sludge and 50 Shigella dysenteriae cells per g of sludge. Because only 0.05 aliquot of a sludge extract was used for the PCR, we deduced that the PCR detected target DNA equivalent to the DNA of 2.5 to 4 cells in the extract. The PCR amplified the uidA fragment from diluted sewage influents and effluents containing E. coli cells. Therefore, the PCR performed with a chemiluminescent gene probe can be used to detect the presence of potentially pathogenic microorganisms in sewage and sludge. This technique can be expanded to permit direct detection of pathogenic microorganisms in water samples, thus leading to enhanced public health protection.     

Molecular analysis of spontaneous mutations at the gpt locus in Chinese hamster ovary (AS52) cells

AS52 cells are Chinese hamster ovary (CHO) cells that carry a single functional copy of the bacterial gpt gene and allow the isolation of 6-thioguanine-resistant (6TGr)mutants arising from mutation at the chromosally integrated gpt locus. The gpt locus in AS52 cells is extremely stable, giving rise to 6TGr mutants at frequencies comparable to the endogenous CHO hprt locus. In this study, we describe the spectrum of spontaneous mutations observed in AS52 cells by Southern blot and DNA sequence analyses. Using the polymerase chain reaction (PCR) and the Thermus aquaticus (Taq) polymerase, we have enzymatically amplified 6TGr mutant gpt sequences in vitro. The PCR product was then sequenced without further cloning manipulations to directly identify gpt structural gene mutations. Deletions predominant among the 62 spontaneous 6TGr-AS52 mutant clones analyzed in this study. Of these, 79% (49/62) of the mutations were identified as deletions either by Southern blotting, PCR amplification or DNA sequence analysis. Among these deletions is a predominant 3-base deletion that was observed in 31% (19/62) of the mutants. These data provide a basis for future comparisons of induced point mutational spectra derived in the AS52 cell line, and demonstrate the utility of PCR in the generation of DNA sequence spectra derived from chromosomally integrated mammalian loci.     

A PCR-based method for manipulation of the vaccinia virus genome that eliminates the need for cloning.

A general method is described for altering specific genes of vaccinia virus (VV). We demonstrate and evaluate the procedure by gene inactivation, using a dominant selectable marker in conjunction with recombinant polymerase chain reaction (PCR). Primers based on the sequence of the target gene enable amplification of flanking arms and their subsequent attachment to the gpt cassette that confers resistance to mycophenolic acid. Linear PCR constructs are transfected into cells infected with wild-type vaccinia virus. Mutant viruses with gpt inserted into the target gene by homologous recombination are then selected by growth in the presence of MPA. This technique was applied to the vaccinia virus thymidine kinase gene and compared to the traditional method of constructing gpt-containing plasmids by cloning. The PCR scheme was found to be highly efficient and could theoretically be used to insert any foreign DNA element into any nonessential target gene for which partial or complete sequence information is available. The procedure can potentially be used for a wide variety of genetic modifications, including the insertion of foreign genes, with poxviruses and other DNA viruses. Genomes of microorganisms, such as bacteria and yeast that can be transformed with linear DNA, are also candidates for manipulation by this methodology.     

Small fragment homologous replacement-mediated modification of genomic beta-globin sequences in human hematopoietic stem/progenitor cells

An ultimate goal of gene therapy is the development of a means to correct mutant genomic sequences in the cells that give rise to pathology. A number of oligonucleotide-based gene-targeting strategies have been developed to achieve this goal. One approach, small fragment homologous replacement (SFHR), has previously demonstrated disease-specific genotypic and phenotypic modification after introduction of small DNA fragments (SDFs) into somatic cells. To validate whether the gene responsible for sickle cell anemia (beta-globin) can be modified by SFHR, a series of studies were undertaken to introduce sickle globin sequences at the appropriate locus of human hematopoietic stem/progenitor cells (HSPCs). The characteristic A two head right arrow T transversion in codon 6 of the beta-globin gene was indicated by restriction fragment length polymorphic (RFLP) analysis of polymerase chain reaction (PCR) products generated by amplification of DNA and RNA. At the time of harvest, it was determined that the cells generally contained 相似文献   

Chromosome targeting at short polypurine sites by cationic triplex-forming oligonucleotides

Triplex-forming oligonucleotides (TFOs) bind specifically to duplex DNA and provide a strategy for site-directed modification of genomic DNA. Recently we demonstrated TFO-mediated targeted gene knockout following systemic administration in animals. However, a limitation to this approach is the requirement for a polypurine tract (typically 15-30 base pairs (bp)) in the target DNA to afford high affinity third strand binding, thus restricting the number of sites available for effective targeting. To overcome this limitation, we have investigated the ability of chemically modified TFOs to target a short (10 bp) site in a chromosomal locus in mouse cells and induce site-specific mutations. We report that replacement of the phosphodiester backbone with cationic phosphoramidate linkages, either N,N-diethylethylenediamine or N,N-dimethylaminopropylamine, in a 10-nucleotide, psoralen-conjugated TFO confers substantial increases in binding affinity in vitro and is required to achieve targeted modification of a chromosomal reporter gene in mammalian cells. The triplex-directed, site-specific induction of mutagenesis in the chromosomal target was charge- and modification-dependent, with the activity of N,N-diethylethylenediamine > N,N-dimethylaminopropylamine phosphodiester, resulting in 10-, 6-, and <2-fold induction of target gene mutagenesis, respectively. Similarly, N,N-diethylethylenediamine and N,N-dimethylaminopropylamine TFOs were found to enhance targeting at a 16-bp G:C bp-rich target site in a chromatinized episomal target in monkey COS cells, although this longer site was also targetable by a phosphodiester TFO. These results indicate that replacement of phosphodiester bonds with positively charged N,N-diethylethylenediamine linkages enhances intracellular activity and allows targeting of relatively short polypurine sites, thereby substantially expanding the number of potential triplex target sites in the genome.     

Extraction and purification of microbial DNA from petroleum-contaminated soils and detection of low numbers of toluene, octane and pesticide degraders by multiplex polymerase chain reaction and Southern analysis

We investigated the use of multiplex polymerase chain reaction (FCR) techniques coupled with Southern analysis to detect xenobiotic-degrading organisms that had been added to three soils. Two soils highly contaminated with petroleum hydrocarbons and a less contaminated control soil were amended with tenfold dilutions of Pseudomonas putida mt-2 (pWWO), P. oleovorans (OCT), and Alcaligenes eutrophus JMP134 (pJP4), or, for controls, phosphate buffer alone. Total DNA was then isolated from the soils and purified using a sequential precipitation and dissolution purification procedure. This DNA was subjected to multiplex polymerase chain reaction (PCR) using primers that amplify regions of xylM (PCR product = 631 bp), alkB (546 bp) and tfdA (710 bp), which are found on pWWO, OCT and pJP4, respectively. The sizes of the amplified DNA fragments were designed to permit simultaneous amplification and detection of the target genes. Ethidium bromide-stained gels of the initial PCR reaction indicated detectable amplification of between 10* to 10* cells per gram soil, depending on the soil and the target gene. Southern analysis of the PCR amplified DNA improved detection limits to between 1 and 10 cells of each target species per gram of soil, and confirmed the identity of the PCR products. For some samples that were initially resistant to PCR, dilution of the environmental DNA resulted in positive PCR results. This treatment presumably overcame the inhibition of the PCR by diluting coextracted contaminants in the environmental DNA. A second PCR on an aliquot (1 μL) of the first reaction increased the ethidium bromide-based detection limits for one of the soils to six cells per gram of soil; it did not increase the detection limits for the other soils. Therefore, the DNA extraction procedure and multiplex PCR permitted the simultaneous detection of three types of biodegradarJve cells, at a lower detection limit of = > 10 cells per gram of highly contaminated, organic soil. However, due to kinetic limitations of multiplex PCR, the amplified signals did not follow a close dose response to the numbers of added target cells.     

A novel method for the efficient and selective identification of 5-hydroxymethylcytosine in genomic DNA

Recently, 5-hydroxymethylcytosine (5hmC) was identified in mammalian genomic DNA. The biological role of this modification remains unclear; however, identifying the genomic location of this modified base will assist in elucidating its function. We describe a method for the rapid and inexpensive identification of genomic regions containing 5hmC. This method involves the selective glucosylation of 5hmC residues by the β-glucosyltransferase from T4 bacteriophage creating β-glucosyl-5-hydroxymethylcytosine (β-glu-5hmC). The β-glu-5hmC modification provides a target that can be efficiently and selectively pulled down by J-binding protein 1 coupled to magnetic beads. DNA that is precipitated is suitable for analysis by quantitative PCR, microarray or sequencing. Furthermore, we demonstrate that the J-binding protein 1 pull down assay identifies 5hmC at the promoters of developmentally regulated genes in human embryonic stem cells. The method described here will allow for a greater understanding of the temporal and spatial effects that 5hmC may have on epigenetic regulation at the single gene level.     

酿酒酵母ADH3基因的敲除

设计含有与酿酒酵母(Saccharomyces cerevisiae)编码乙醇脱氢酶Ⅲ的ADH3基因ORF两侧序列同源的长引物,以质粒pUG6为模板进行PCR构建带有Cre/loxP系统的敲除组件。转化酿酒酵母YS3(Saccharomyces cerevisiae),并将质粒pSH65转入阳性克隆子。半乳糖诱导表达Cre酶切除Kanr基因,在YPD培养基中连续传代培养丢失pSH65质粒,在原ORF处留下一个loxP位点,获得ADH3单倍体缺陷型菌株。利用同样的方法再次敲除双倍体的另一个等位基因。最终获得ADH3双倍体基因缺陷型突变株YS3-ADH3。     

DNA amplification to enhance detection of genetically engineered bacteria in environmental samples

The polymerase chain reaction (PCR) was performed to amplify a 1.0-kilobase (kb) probe-specific region of DNA from the herbicide-degrading bacterium Pseudomonas cepacia AC1100 in order to increase the sensitivity of detecting the organism by dot-blot analysis. The 1.0-kb region was an integral portion of a larger 1.3-kb repeat sequence which is present as 15 to 20 copies on the P. cepacia AC1100 genome. PCR was performed by melting the target DNA, annealing 24-base oligonucleotide primers to unique sequences flanking the 1.0-kb region, and performing extension reactions with DNA polymerase. After extension, the DNA was again melted, and the procedure was repeated for a total of 25 to 30 cycles. After amplification the reaction mixture was transferred to nylon filters and hybridized against radiolabeled 1.0-kb fragment probe DNA. Amplified target DNA was detectable in samples initially containing as little as 0.3 pg of target. The addition of 20 micrograms of nonspecific DNA isolated from sediment samples did not hinder amplification or detection of the target DNA. The detection of 0.3 pg of target DNA was at least a 10(3)-fold increase in the sensitivity of detecting gene sequences compared with dot-blot analysis of nonamplified samples. PCR performed after bacterial DNA was isolated from sediment samples permitted the detection of as few as 100 cells of P. cepacia AC1100 per 100 g of sediment sample against a background of 10(11) diverse nontarget organisms; that is, P. cepacia AC1100 was positively detected at a concentration of 1 cell per g of sediment. This represented a 10(3)-fold increase in sensitivity compared with nonamplified samples.     

DNA amplification to enhance detection of genetically engineered bacteria in environmental samples.

The polymerase chain reaction (PCR) was performed to amplify a 1.0-kilobase (kb) probe-specific region of DNA from the herbicide-degrading bacterium Pseudomonas cepacia AC1100 in order to increase the sensitivity of detecting the organism by dot-blot analysis. The 1.0-kb region was an integral portion of a larger 1.3-kb repeat sequence which is present as 15 to 20 copies on the P. cepacia AC1100 genome. PCR was performed by melting the target DNA, annealing 24-base oligonucleotide primers to unique sequences flanking the 1.0-kb region, and performing extension reactions with DNA polymerase. After extension, the DNA was again melted, and the procedure was repeated for a total of 25 to 30 cycles. After amplification the reaction mixture was transferred to nylon filters and hybridized against radiolabeled 1.0-kb fragment probe DNA. Amplified target DNA was detectable in samples initially containing as little as 0.3 pg of target. The addition of 20 micrograms of nonspecific DNA isolated from sediment samples did not hinder amplification or detection of the target DNA. The detection of 0.3 pg of target DNA was at least a 10(3)-fold increase in the sensitivity of detecting gene sequences compared with dot-blot analysis of nonamplified samples. PCR performed after bacterial DNA was isolated from sediment samples permitted the detection of as few as 100 cells of P. cepacia AC1100 per 100 g of sediment sample against a background of 10(11) diverse nontarget organisms; that is, P. cepacia AC1100 was positively detected at a concentration of 1 cell per g of sediment. This represented a 10(3)-fold increase in sensitivity compared with nonamplified samples.     

A rapid and simple method for inactivating chromosomal genes in Yersinia

A polymerase chain reaction (PCR)-based procedure without any cloning step was developed for a rapid mutagenesis/deletion of chromosomal target genes in Yersinia. For this purpose, a PCR fragment carrying an antibiotic resistance gene flanked by regions homologous to the target locus is electroporated into a recipient strain expressing the highly proficient homologous recombination system encoded by plasmid pKOBEG-sacB. Two PCR procedures were tested to generate an amplification product formed of an antibiotic resistance gene flanked by short (55 bp) or long (500 bp) homology extensions. Using this method, three chromosomal loci were successfully disrupted in Yersinia pseudotuberculosis. The use of this technique allows rapid and efficient large-scale mutagenesis of Yersinia target chromosomal genes.     

A directed search for DNA sequences tightly linked to cereal cyst nematode resistance genes in Triticum tauschii.

An improved system for identifying DNA sequences linked to a targeted region was developed by fractionating DNA sequences prior to polymerase chain reaction (PCR) analysis. In an attempt to identify DNA markers linked to a strong CCN resistance gene, Ccn-D1, in Triticum tauschii, DNA samples from individuals homozygous for resistance and susceptibility at the Ccn-D1 locus in a segregating progeny were bulked separately to produce "near isogenic" DNA pools. The polymerase chain reaction was employed to generate several DNA amplification products from each of the bulked DNA segregants using 240 random (RAPD) and 4 semirandom (consensus sequences of intron-splice junctions) primers. A DNA polymorphic fragment was apparent between the resistant and susceptible bulks using one of the semirandom primers. Hydroxylapatite chromatography of reannealed DNA (to Cot values > 100) was used to enrich low copy DNA sequences in the bulk DNA segregants (resistant and susceptible DNA pools). PCR analysis on the low copy enriched DNA pool increased the level of polymorphism detected between bulked segregants. One of the RAPD fragments present in only the resistant low copy DNA pool was cloned and mapped to the distal region of the long arm of chromosome 2D. By using the cloned RAPD fragment, csE20-2, to assay an RFLP locus in three independent F2 progenies, complete cosegregation was obtained with the Ccn-D1 locus. Joint segregation analysis from a genome-wide mapping of RFLP markers and a second CCN resistance in T. tauschii, Ccn-D2, showed this locus to be loosely linked to the proximal region of chromosome 2.     

Universal DNA microarray method for multiplex detection of low abundance point mutations.

Cancers arise from the accumulation of multiple mutations in genes regulating cellular growth and differentiation. Identification of such mutations in numerous genes represents a significant challenge in genetic analysis, particularly when the majority of DNA in a tumor sample is from wild-type stroma. To overcome these difficulties, we have developed a new type of DNA microchip that combines polymerase chain reaction/ligase detection reaction (PCR/LDR) with "zip-code" hybridization. Suitably designed allele-specific LDR primers become covalently ligated to adjacent fluorescently labeled primers if and only if a mutation is present. The allele-specific LDR primers contain on their 5'-ends "zip-code complements" that are used to direct LDR products to specific zip-code addresses attached covalently to a three-dimensional gel-matrix array. Since zip-codes have no homology to either the target sequence or to other sequences in the genome, false signals due to mismatch hybridizations are not detected. The zip-code sequences remain constant and their complements can be appended to any set of LDR primers, making our zip-code arrays universal. Using the K- ras gene as a model system, multiplex PCR/LDR followed by hybridization to prototype 3x3 zip-code arrays correctly identified all mutations in tumor and cell line DNA. Mutations present at less than one per cent of the wild-type DNA level could be distinguished. Universal arrays may be used to rapidly detect low abundance mutations in any gene of interest.     

一种高特异性的改良降落PCR

为提高基因组DNA中的基因PCR检出的特异性,设计了一种改良的降落PCR程序,并分别用TaqDNA聚合酶及高保真PfuDNA聚合酶进行实验。自盐藻Dunaliella bardawil中提取基因组DNA作为PCR模板,使用TaqDNA聚合酶及PfuDNA聚合酶,运用普通PCR和降落PCR程序,扩增胡萝眩素生物合成相关基因（cbr）上游启动子序列,并电泳比较PCR扩增产物的特异性。结果显示,使用普通Taq酶PCR,普通PCR程序产生200bp,500bp和1272bp长的三条带,而TD-PCR程序仅克隆出1272bp的特异带;利用高保真的PfuDNA聚合酶作PCR,在TD-PCR泳道中仅有1272bp一条带,而普通PCR除了1272bp的特异带外,还出现一条500bp的非特异带。无论使用普通Taq酶或高保真酶Pfu,改良的降落PCR程序均明显提高PCR的特异性,类似的降落PCR程序可望用于克隆用普通PCR难以克隆的基因片段,或在假阳性难以去除的情况下提高PCR的特异性。     

Splicing together different regions of a gene by modified polymerase chain reaction-based site-directed mutagenesis

A modified polymerase chain reaction (PCR)-based site-directed mutagenesis method used to splice together different regions of a gene by deleting hundreds of nucleotides of undesired sequences is described. This method was inspired by a PCR-based site-directed mutagenesis method developed by Stratagene (La Jolla, CA, USA); the procedure and primer design were modified to enable the method to generate deletions several hundreds of nucleotides in length with an efficiency of 80-100%, and to delete two DNA fragments simultaneously in a single PCR. This method should be useful for deletion of large DNA fragments from a gene.     

Calibration-curve-free quantitative PCR: a quantitative method for specific nucleic acid sequences without using calibration curves

We have developed a simple quantitative method for specific nucleic acid sequences without using calibration curves. This method is based on the combined use of competitive polymerase chain reaction (PCR) and fluorescence quenching. We amplified a gene of interest (target) from DNA samples and an internal standard (competitor) with a sequence-specific fluorescent probe using PCR and measured the fluorescence intensities before and after PCR. The fluorescence of the probe is quenched on hybridization with the target by guanine bases, whereas the fluorescence is not quenched on hybridization with the competitor. Therefore, quench rate (i.e., fluorescence intensity after PCR divided by fluorescence intensity before PCR) is always proportional to the ratio of the target to the competitor. Consequently, we can calculate the ratio from quench rate without using a calibration curve and then calculate the initial copy number of the target from the ratio and the initial copy number of the competitor. We successfully quantified the copy number of a recombinant DNA of genetically modified (GM) soybean and estimated the GM soybean contents. This method will be particularly useful for rapid field tests of the specific gene contamination in samples.     

Detection of human papilloma virus DNA sequences by polymerase chain reaction

We have developed a polymerase chain reaction-based procedure for reproducible detection of the E6-E7 gene in human papilloma virus DNA sequences using formalin-fixed, paraffin-embedded tissue sections. This procedure is a simple one-step procedure which does not require any elaborate hybridization following polymerase chain reaction amplification. The protocol combines modified tissue treatment and proper primer selection for efficient amplification of target DNA in a highly specific manner allowing identification in ethidium bromide-stained gels. The procedure described here is useful for a variety of tissue preparations, particularly formalin-fixed, paraffin-embedded archival tissues.