Identification of dipeptide repeats and a cell wall sorting signal in the fimbriae-associated adhesin, Fap1, of Streptococcus parasanguis

Fap1, a fimbriae-associated protein, is involved in fimbriae assembly and adhesion of Streptococcus parasanguis FW213 (Wu et al., 1998). In this study, the sequence of the fap1 gene was resolved using a primer island transposition system. Sequence analysis indicated that fap1 was composed of 7659 nucleotides. The predicted Fap1 protein contains an unusually long signal sequence (50 amino acid residues), a cell wall sorting signal and two repeat regions. Repeat regions I and II have a similar dipeptide composition (E/V/I)S, composed of 28 and 1000 repeats respectively. The two regions combined accounted for 80% of the Fap1 coding region. The experimental amino acid composition and isoelectric point (pI) of Fap1 were similar to that predicted from the deduced Fap1 protein. Results of Northern analyses revealed that the fap1 open reading frame (ORF) was transcribed as a 7.8 kb monocistronic message. Insertional inactivation at the 3' end, downstream of the fap1 ORF, did not affect Fap1, fimbrial expression or bacterial adhesion. Insertional inactivation of fap1 immediately upstream of the repeat region II abolished expression of Fap1 and fimbriae, and was concurrent with a diminution in adhesion of FW213. Inactivation of the cell wall sorting signal of fap1 also eliminated long fimbrial formation and reduced the ability of FW213 to bind to SHA. Fap1 was no longer anchored on the cell surface. Large quantities of truncated Fap1 were found in the growth medium instead. These results suggest that the fap1 ORF alone is sufficient to support Fap1 expression and adhesion, and demonstrate that anchorage of Fap1 on the cell surface is required for long fimbriae formation. These data further document the role of long fimbriae in adhesion of S. parasanguis FW213 to SHA.     

The Fap1 fimbrial adhesin is a glycoprotein: antibodies specific for the glycan moiety block the adhesion of Streptococcus parasanguis in an in vitro tooth model

Streptococcus parasanguis is a primary colonizer of the tooth surface and plays a pivotal role in the formation of dental plaque. The fimbriae of S. parasanguis are important in mediating adhesion to saliva-coated hydroxylapatite (SHA), an in vitro tooth adhesion model. The Fap1 adhesin has been identified as the major fimbrial subunit, and recent studies suggest that Fap1 is a glycoprotein. Monosaccharide analysis of Fap1 purified from the culture supernatant of S. parasanguis indicated the presence of rhamnose, glucose, galactose, N-acetylglucosamine and N-acetylgalactosamine. A glycopeptide moiety was isolated from a pronase digest of Fap1 and purified by immunoaffinity chromatography. The monosaccharide composition of the purified glycopeptide was similar to that of the intact molecule. The functionality of the glycan moiety was determined using monoclonal antibodies (MAbs) specific for the intact Fap1 glycoprotein. These antibodies were grouped into two categories based on their ability to block adhesion of S. parasanguis to SHA and their corresponding specificity for either protein or glycan epitopes of the Fap1 protein. 'Non-blocking' MAb epitopes were mapped to unique protein sequences in the N-terminus of the Fap1 protein using non-glycosylated recombinant Fap1 proteins (rFap1 and drFap1) expressed in Escherichia coli. In contrast, the 'blocking' antibodies did not bind to the recombinant Fap1 proteins, and were effectively competed by the binding to the purified glycopeptide. These data suggest that the 'blocking' antibodies are specific for the glycan moiety and that the adhesion of S. parasanguis is mediated by sugar residues associated with Fap1.     

Construction and Analysis of a Streptococcus parasanguis recA Mutant: Homologous Recombination Is Not Required for Adhesion in an In Vitro Tooth Surface Model

PCR was used to amplify an internal region of the recA gene from Streptococcus parasanguis FW213. The PCR fragment was used as a probe to recover the entire streptococcal recA gene from an S. parasanguis genomic library, and the sequence of the gene was determined. The deduced product of the S. parasanguis recA gene showed a high degree of amino acid identity with other prokaryotic RecA proteins. The cloned recA sequence was disrupted in vitro by insertional mutagenesis, and the mutated allele was then introduced into the S. parasanguis chromosome by homologous recombination. Results of Southern hybridizations confirmed the replacement of the wild-type recA gene with the mutated allele. The recA mutant strain was considerably more sensitive to UV light than the parental strain, and this phenotype was consistent with a mutation in recA. The S. parasanguis recA mutant showed no reduction in its ability to adhere in the in vitro tooth surface model, saliva-coated hydroxylapatite (SHA), or in its ability to express the fimbria-associated adhesin Fap1. These results demonstrate that in vitro attachment of S. parasanguis FW213 to SHA and expression of Fap1 are recA independent.     

Two gene determinants are differentially involved in the biogenesis of Fap1 precursors in Streptococcus parasanguis

Mature Fap1, a 200-kDa fimbria-associated adhesin, is required for fimbrial biogenesis and biofilm formation in Streptococcus parasanguis. Fap1-like proteins are found in the genomes of many streptococcal and staphylococcal species. Fap1 is a serine-rich glycoprotein modified by O-linked glycan moieties. In this study, we identified a seven-gene cluster including secY2, orf1, orf2, orf3, secA2, gtf1, and gtf2 that is localized immediately downstream of fap1. The lower G+C contents and the presence of a putative transposase element suggest that this gene cluster was horizontally transferred from other bacteria and represents a genomic island. At least two genes in this island mediated Fap1 biogenesis. Mutation of a glucosyltransferase (Gtf1) gene led to accumulation of a Fap1 precursor, which had no detectable glycan moieties. Inactivation of a gene coding for an accessory Sec protein (SecY2) resulted in expression of a distinct Fap1 precursor, which reacted with one glycan-specific Fap1 antibody but not with another glycan-specific antibody. Furthermore, partially glycosylated Fap1 was detected on the cell surface and in the culture supernatant. These data suggest that SecY2 has a role in complete glycosylation of Fap1 and imply that SecY2 is not the only translocation channel for the Fap1 precursor and that alternative secretion machinery exists. Together, Gtf1 and SecY2 are involved in biogenesis of two distinct Fap1 precursors in S. parasanguis. Discovery of the effect of an accessory Sec protein on Fap1 glycosylation suggests that Fap1 secretion and glycosylation are coupled during Fap1 biogenesis.     

Investigating the role of secA2 in secretion and glycosylation of a fimbrial adhesin in Streptococcus parasanguis FW213

Adhesion of Streptococcus parasanguis FW213, a primary colonizer, to the tooth surface is mediated mainly by peritrichous long fimbriae. The fimbrial structural unit, Fap1, is indispensable for fimbriae biogenesis, adhesion to an in vitro tooth model and biofilm formation. Mature Fap1 is a glycoprotein with an apparent molecular mass of 200 kDa. Glycosylated Fap1 is not present in some mutants screened from a transposon mutant library. Localization of the transposition sites revealed a gene determined to be secA2, which is distinct from the canonical secA gene. In FW213, glycosylated Fap1 was present in all the subcellular fractions including the cytoplasm. In VT1574, a non-polar mutant of secA2 generated by in frame deletion, Fap1 was not secreted. Glycosylated Fap1 was present in the membrane and cytoplasm of the mutant, although in greatly reduced amounts. Fap1 secretion and abundance were restored when VT1574 was complemented by a plasmid-borne secA2. The secretion defect of the secA2 mutation appears to be limited to a small group of proteins such as Fap1 and FimA. These data suggested that Fap1 secretion rather than glycosylation was the major effect of the deletion of secA2; however, this deletion also had an impact on Fap1 abundance. Two more secA2 mutants with different regions deleted were tested for their ability to secrete Fap1. One mutant was completely unable to secrete Fap1 while the other was able to secrete, but in a decreased amount. These data suggest that the region deleted in the latter mutant (nucleotides 2032-2337) is dispensable for Fap1 secretion.     

The surface ultrastructure and adhesive properties of a fimbriate streptococcus sanguis strain and six non‐fimbriate mutants

Streptococcus sanguis FW213 carries peritrichous fimbriae (216±28 nm long) and 6 mutants derived from it lack fimbriae but carry peritrichous fibrils with a mean length of 77–4 + 3–9 nm. Both wild type strain and mutants have a ruthenium red staining layer (≤ 14.5±2.9 nm thick) external to the cell wall at the base of the fibrils and fimbriae. The thickness of this layer is strain dependent. Ruthenium red also stains extracellular masses of material, probably extracellular polysaccharide, but not the fimbriae. S. sanguis strain FW 213 adheres to saliva‐coated hydroxyapatite and buccal epithelial cells and is not aggregated by saliva. The 6 non‐fimbriate mutants of FW213 adhered poorly to hydroxyapatite coated in heated whole saliva (S‐SHA) but 3/6 mutants adhered to the same extent or higher than the wild type to S‐SHA coated in unheated saliva, indicating that strain FW213 may carry a non‐fimbriate adhesin and that whole saliva contains a heat sensitive adhesin. All the mutants had a significantly thinner ruthenium red staining layer (RRL) external to the cell wall than the wild type strain FW213, while the cell surface hydrophobicity showed that the mutants were all less hydrophobic than the wild type FW213.     

Identification of critical residues in Gap3 of <Emphasis Type="Italic">Streptococcus parasanguinis</Emphasis> involved in Fap1 glycosylation,fimbrial formation and <Emphasis Type="Italic">in vitro</Emphasis>adhesion

Background  

Streptococcus parasanguinis is a primary colonizer of human tooth surfaces and plays an important role in dental plaque formation. Bacterial adhesion and biofilm formation are mediated by long peritrichous fimbriae that are composed of a 200 kDa serine rich glycoprotein named Fap1 (fimbriae-associated protein). Glycosylation and biogenesis of Fap1 are modulated by a gene cluster downstream of the fap1 locus. A gene encoding a glycosylation-associated protein, Gap3, was found to be important for Fap1 glycosylation, long fimbrial formation and Fap1-mediated biofilm formation.     

Structural insight into the role of Streptococcus parasanguinis Fap1 within oral biofilm formation

The fimbriae-associated protein 1 (Fap1) is a major adhesin of Streptococcus parasanguinis, a primary colonizer of the oral cavity that plays an important role in the formation of dental plaque. Fap1 is an extracellular adhesive surface fibre belonging to the serine-rich repeat protein (SRRP) family, which plays a central role in the pathogenesis of streptococci and staphylococci. The N-terminal adhesive region of Fap1 (Fap1-NR) is composed of two domains (Fap1-NR_α and Fap1-NR_β) and is projected away from the bacterial surface via the extensive serine-rich repeat region, for adhesion to the salivary pellicle. The adhesive properties of Fap1 are modulated through a pH switch in which a reduction in pH results in a rearrangement between the Fap1-NR_α and Fap1-NR_β domains, which assists in the survival of S. parasanguinis in acidic environments. We have solved the structure of Fap1-NR_α at pH 5.0 at 3.0 ? resolution and reveal how subtle rearrangements of the 3-helix bundle combined with a change in electrostatic potential mediates ‘opening’ and activation of the adhesive region. Further, we show that pH-dependent changes are critical for biofilm formation and present an atomic model for the inter-Fap1-NR interactions which have been assigned an important role in the biofilm formation.     

Structural Insights into Serine-rich Fimbriae from Gram-positive Bacteria

The serine-rich repeat family of fimbriae play important roles in the pathogenesis of streptococci and staphylococci. Despite recent attention, their finer structural details and precise adhesion mechanisms have yet to be determined. Fap1 (Fimbriae-associated protein 1) is the major structural subunit of serine-rich repeat fimbriae from Streptococcus parasanguinis and plays an essential role in fimbrial biogenesis, adhesion, and the early stages of dental plaque formation. Combining multidisciplinary, high resolution structural studies with biological assays, we provide new structural insight into adhesion by Fap1. We propose a model in which the serine-rich repeats of Fap1 subunits form an extended structure that projects the N-terminal globular domains away from the bacterial surface for adhesion to the salivary pellicle. We also uncover a novel pH-dependent conformational change that modulates adhesion and likely plays a role in survival in acidic environments.     

Mitogenic stimulation of human B lymphocytes by the mannose-specific adhesin on Escherichia coli type 1 fimbriae

Escherichia coli type 1 fimbriae contain in association with the major structural protein a lectin-like adhesin moiety that mediates attachment of E. coli to mannose-containing receptors on the surface of host cells. We have investigated the lymphocyte mitogenic activity of this mannose-specific adhesin by comparing the ability of purified wild type type 1 fimbriae containing the adhesin and mutant type 1 fimbriae lacking the adhesin to stimulate proliferation in human lymphocytes. Both fimbriae stimulated a peak of proliferation at 8 days whereas only the wild type fimbriae stimulated an additional peak of proliferation occurring at 3 days. Proliferation at 3 days but not at 8 days could be blocked by the addition of alpha-methyl-D-mannoside. Neonatal lymphocytes from umbilical cord blood responded to both wild type and mutant fimbriae in a fashion similar to adult cells. Stimulation of separated T and non-T cell populations indicated that the proliferation seen at 3 days was solely due to non-T cells whereas the 8-day response was due to T cell proliferation. The addition of gamma-irradiated T cells did not appear to enhance the 3-day response of the non-T cells. However, the 8-day response by T cells was dependent on the presence of gamma-irradiated non-T cells. In cultures of unseparated cells, wild type fimbriae stimulated more than 75% of the B cells to enter the S and G2 phase at 3 days whereas at 8 days cycling T cells were present in both wild type and mutant fimbriae-stimulated cultures. Taken together, our observations suggest that the adhesin molecule stimulates a polyclonal mitogenic response in B cells that peaks at 3 days, and other structural components of the fimbriae are responsible for evoking an 8-day (probably immune) response in T cells.     

Cloning and expression of an adhesin antigen of Streptococcus sanguis G9B in Escherichia coli

A genomic library of Streptococcus sanguis, strain G9B, was constructed and expressed in Escherichia coli using a lambda gt11 expression vector. The amplified library was probed with polyclonal anti-G9B IgG and 13 antigen-positive clones were isolated. A lysate of one clone, designated PP39, absorbed the adhesion-inhibitory activity of anti-G9B IgG. This clone contained an insert of approximately 2000 bp and expressed unique 200 and 53 kDa proteins that reacted with monospecific anti-adhesin antibody. The 200 kDa protein also reacted with anti-beta-galactosidase IgG, indicating that it is a fusion protein of which 84 kDa represents the streptococcal adhesin. The 84 and 53 kDa proteins are similar in size to the major polypeptides in a streptococcal antigen complex which is associated with the adhesion of G9B to saliva-coated hydroxyapatite. The 53 kDa fragment may result from post-translational cleavage of the recombinant polypeptide.     

Purification and characterization of a Bacteroides loeschei adhesin that interacts with procaryotic and eucaryotic cells.

The adhesin of Bacteroides loeschei PK1295 that mediates coaggregation with Streptococcus sanguis 34 and hemagglutination of erythrocytes was purified to electrophoretic homogeneity. The lectinlike protein has an estimated native Mr of 450,000 and consists of six subunits of identical molecular weight (Mr 75,000). The purified adhesin appears to be a basic protein with a pI between 7.4 and 8.0. Amino acid and N-terminal sequence analyses were carried out with the purified protein. These indicated that the protein contains a large number of Asx and Glx residues as well as basic amino acid residues. The binding site of the pure adhesin retained its native configuration during purification. When preincubated with streptococcal partner cells at pH 4.6, the adhesin prevented B. loeschei cells from coaggregating with the streptococci. An adhesin preparation adjusted to a pH of 6.8 rapidly agglutinated both streptococci and neuraminidase-treated erythrocytes. Galactosides inhibited the agglutination reactions.     

Canonical SecA associates with an accessory secretory protein complex involved in biogenesis of a streptococcal serine-rich repeat glycoprotein

Fap1, a serine-rich repeat glycoprotein (SRRP), is required for bacterial biofilm formation of Streptococcus parasanguinis. Fap1-like SRRPs are found in many gram-positive bacteria and have been implicated in bacterial fitness and virulence. A conserved five-gene cluster, secY2-gap1-gap2-gap3-secA2, located immediately downstream of fap1, is required for Fap1 biogenesis. secA2, gap1, and gap3 encode three putative accessory Sec proteins. SecA2 mediates export of mature Fap1, and Gap1 and Gap3 are required for Fap1 biogenesis. Interestingly, gap1 and gap3 mutants exhibited the same phenotype as a secA2 mutant, implying that Gap1 and Gap3 may interact with SecA2 to mediate Fap1 biogenesis. Glutathione S-transferase pulldown experiments revealed a direct interaction between SecA2, Gap1, and Gap3 in vitro. Coimmunoprecipitation analysis demonstrated the formation of a SecA2-Gap1-Gap3 complex. Homologues of SecA2, Gap1, and Gap3 are conserved in many streptococci and staphylococci. The corresponding homologues from Streptococcus agalactiae also interacted with each other and formed a protein complex. Furthermore, the Gap1 homologues from S. agalactiae and Streptococcus sanguinis rescued the Fap1 defect in the Gap1 mutant, indicating the functional conservation of the accessory Sec complex. Importantly, canonical SecA interacted with the accessory Sec protein complex, suggesting that the biogenesis of SRRPs mediated by the accessory Sec system is linked to the canonical Sec system.     

Isolation and characterisation of dog uropathogenic Escherichia coli strains and their fimbriae

A number of Escherichia coli strains have been isolated from dogs with urinary tract infections. These strains have been characterised with respect to their O, K, H, and fimbrial antigens, colicin production, antibiotic resistance, plasmid content and their ability to haemagglutinate erythrocytes from various species. Crossed immunoelectrophoresis of fimbrial extracts, as well as the reaction of partly purified fimbriae of a number of these strains with monoclonal antibodies revealed homology or a strong crossereaction with an F12 fimbrial subunit protein of human uropathogenic E. coli strains. Unlike human F12 fimbriae producing strains, the dog isolates did agglutinate dog erythrocytes in the presence of D-mannose but not human erythrocytes, indicating that the adhesin carried by these strains is different from the adhesin on fimbriae of human uropathogenic E. coli. Similar indications were obtained from experiments with latex beads coated with the receptor for P-fimbriae. These beads were agglutinated by Escherichia coli strains from human urinary tract infections, but not by the dog isolates described here. Preliminary adhesion experiments of human and dog Escherichia coli to human bladder epithelial and canine kidney epithelial cells also showed differences in adhesion depending on the origin of the strain tested.     

Properties and construction of plasmid pFW213, a shuttle vector with the oral Streptococcus origin of replication

Streptococcus parasanguinis is among the most successful colonizers of the human body. Strain FW213 harbors a 7.0-kb cryptic plasmid, pFW213, with a copy number at 5 to 10 per chromosome. Sequence and functional analyses of pFW213 revealed that the open reading frame (ORF) encoding the replication protein (Rep) is essential for the replication of pFW213, and the putative plasmid addiction system (RelB and RelE) and an ORF (ORF6) with no known function are required for its stability. The minimal replicon of pFW213 contains the rep gene and its 5'-flanking 390-bp region. Within the minimal replicon, an A/T-rich region followed by 5 contiguous 22-bp repeats was located 5' of the ATG of rep. No single-stranded replication intermediates were detected in the derivatives of pFW213, suggesting that pFW213 replicates via the theta replication mechanism. The minimal replicon was unstable in streptococcal hosts without selection, but the stability was greatly enhanced in derivatives containing the intact relBE genes. A Streptococcus-Escherichia coli shuttle vector, pCG1, was constructed with the pFW213 replicon. Plasmid pCG1 features a multiple cloning region and a spectinomycin resistance determinant that is expressed in both Streptococcus spp. and E. coli. Various streptococcal DNA fragments were cloned in pCG1, and the recombinant constructs were stably maintained in the streptococcal hosts. Since pCG1 is compatible with the most widely used streptococcal replicon, pVA380-1, pCG1 will provide a much needed tool allowing the cloning of two genes that work in concert in the same host.     

Ordered translocation of 987P fimbrial subunits through the outer membrane of Escherichia coli.

The 987P fimbria of enterotoxigenic Escherichia coli is a heteropolymeric structure which consists essentially of a major FasA subunit and a minor subunit, the FasG adhesin. The latter harbors the binding moiety for receptor molecules on piglet intestinal epithelial cells. In this study, anti-FasF antibody probes were developed and used to demonstrate that the FasF protein represents a new minor fimbrial component. FasF was identified in highly purified fimbriae, and its sequence demonstrated significant levels of similarity with that of FasA. Immune electron microscopy localized both the FasG and FasF proteins at the fimbrial tip as well as at broken ends and at various intervals along the fimbrial length. The presence of these minor proteins in purified 987P fimbriae was corroborated by enzyme-linked immunosorbent assay inhibitions. Finally, the use of nonfimbriated fasG, fasF, and fasA mutants indicated that subunit translocation through the outer membrane follows a specific order, FasG being the first, FasF being the second, and FasA being the third type of exported subunit. Since fimbriae are thought to grow from the base, FasG is proposed to be a tip adhesin and FasF is proposed to be a linker molecule between the adhesin and the fimbrial shaft. Moreover, export of FasG (or FasF) in the absence of FasF (or FasA) indicates that during the process of fimbrial biogenesis in the outer membrane, translocating events precede the initiation of subunit heteropolymerization.     

Differential roles of individual domains in selection of secretion route of a Streptococcus parasanguinis serine-rich adhesin, Fap1

Fimbria-associated protein 1 (Fap1) is a high-molecular-mass glycosylated surface adhesin required for fimbria biogenesis and biofilm formation in Streptococcus parasanguinis. The secretion of mature Fap1 is dependent on the presence of SecA2, a protein with some homology to, but with a different role from, SecA. The signals that direct the secretion of Fap1 to the SecA2-dependent secretion pathway rather than the SecA-dependent secretion pathway have not yet been identified. In this study, Fap1 variants containing different domains were expressed in both secA2 wild-type and mutant backgrounds and were tested for their ability to be secreted by the SecA- or SecA2-dependent pathway. The presence or absence of the cell wall anchor domain (residues 2531 to 2570) at the C terminus did not alter the selection of the Fap1 secretion route. The Fap1 signal peptide (residues 1 to 68) was sufficient to support the secretion of a heterologous protein via the SecA-dependent pathway, suggesting that the signal peptide was sufficient for recognition by the SecA-dependent pathway. The minimal sequences of Fap1 required for the SecA2-dependent pathway included the N-terminal signal peptide, nonrepetitive region I (residues 69 to 102), and part of nonrepetitive region II (residues 169 to 342). The two serine-rich repeat regions (residues 103 to 168 and 505 to 2530) were not required for Fap1 secretion. However, they were both involved in the specific inhibition of Fap1 secretion via the SecA-dependent pathway.