Production of raw cassava starch-degrading enzyme by Penicillium and its use in conversion of raw cassava flour to ethanol

A newly isolated strain Penicillium sp. GXU20 produced a raw starch-degrading enzyme which showed optimum activity towards raw cassava starch at pH 4.5 and 50 °C. Maximum raw cassava starch-degrading enzyme (RCSDE) activity of 20 U/ml was achieved when GXU20 was cultivated under optimized conditions using wheat bran (3.0% w/v) and soybean meal (2.5% w/v) as carbon and nitrogen sources at pH 5.0 and 28 °C. This represented about a sixfold increment as compared with the activity obtained under basal conditions. Starch hydrolysis degree of 95% of raw cassava flour (150 g/l) was achieved after 72 h of digestion by crude RCSDE (30 U/g flour). Ethanol yield reached 53.3 g/l with fermentation efficiency of 92% after 48 h of simultaneous saccharification and fermentation of raw cassava flour at 150 g/l using the RCSDE (30 U/g flour), carried out at pH 4.0 and 40 °C. This strain and its RCSDE have potential applications in processing of raw cassava starch to ethanol.     

Ethanol fermentation of raw cassava starch with Rhizopus koji in a gas circulation type fermentor

Studies have been conducted in a gas circulation type fermentor in order to characterize the ethanol fermentation of uncooked cassava starch with Rhizopus koji. Results showed that ethanol concentration reached 13-14% (v/v) in 4-day broth, and the maximum productivity of ethanol was 2.3 g ethanol/L broth h. This productivity was about 50% compared to the productivity of a glucose-yeast system. Ethanol yield reached 83.5-72.3% of the theoretical yield for the cassava starch used. The fermentor used in the present work has been proven by experiment to be suitable for ethanol fermentation of the broth with solid substrate.     

Biochemical oxygen demands of potential cellulose ethanol waste streams

Summary The effects of potential waste streams resulting from ethanol production by the simultaneous saccharification fermentation (SSF) of cellulose were determined by measuring the biochemical oxygen demand (BOD). A worst-case analysis of BOD from ethanol-containing SSF beer showed an initial value of 1670 mg/l BOD, which is 29% of the expected initial BOD. When ethanol was reduced to 0.1–0.2% w/v, BOD levels were 605 mg/l in the mash and 250 mg/l in the beer. Both values were well below the projected discharge levels.     

Ethanol production by <Emphasis Type="Italic">Zymomonas mobilis</Emphasis> CHZ2501 from industrial starch feedstocks

The optimal conditions of ethanol fermentation process by Zymomonas mobilis CHZ2501 were investigated. Brown rice, naked barley, and cassava were selected as representatives of the starch-based raw material commercially available for ethanol production. Considering enzyme used for saccharification of starch, the ethanol productivity with complex enzyme was higher than glucoamylase. With regards to the conditions of saccharification, the final ethanol productions of simultaneous saccharification and pre-saccharified process for 1 h were not significantly different. The result suggested that it is possible for simultaneous saccharification and fermentation as a cost-effective process for ethanol production by eliminating the separate saccharification. Additionally, the fermentation rate in early fermentation stage was generally increased with increase of inoculum volume. As the result, optimal condition for ethanol production was simultaneous saccharification and fermentation with complex enzyme and 5% inoculation. Under the same condition, the volumetric productivities and ethanol yields were attained to 3.26 g/L·h and 93.5% for brown rice, 2.62 g/L·h and 90.4% for naked barley, and 3.28 g/L·h and 93.7% for cassava, respectively.     

Bioconversion of corn stover derived pentose and hexose to ethanol using cascade simultaneous saccharification and fermentation (CSSF)

A cascade type of fermentation, designated the cascade simultaneous saccharification and fermentation (CSSF), was studied to convert corn stover derived pentose and hexose to ethanol with reduced enzyme input. In detail, each step of CSSF utilizes two sequential SSF phases operating on pentose and hexose, i.e., pentose conversion using xylanase, endo-glucanase, and recombinant Escherichia coli (KO11) with minimal glucose conversion in the first phase SSF, and hexose conversion in the second phase SSF using cellulase, β-glucosidase, and Saccharomyces cerevisiae (D(5)A). In this cascade scheme, multiple stages of 1st and 2nd phase SSF were performed in series; enzymes are recycled from the fermentation broth of the last stage for the use of the next stage. This bioconversion process yielded up to 60% of the theoretical maximum ethanol yield based on the total sugars in untreated corn stover, while enzyme loadings were reduced by 50% (v/v) and the final ethanol concentration reached 27 g/l.     

Enhanced production of raw starch degrading enzyme using agro-industrial waste mixtures by thermotolerant Rhizopus microsporus for raw cassava chip saccharification in ethanol production

In the present study, solid-state fermentation for the production of raw starch degrading enzyme was investigated by thermotolerant Rhizopus microsporus TISTR 3531 using a combination of agro-industrial wastes as substrates. The obtained crude enzyme was applied for hydrolysis of raw cassava starch and chips at low temperature and subjected to nonsterile ethanol production using raw cassava chips. The agro-industrial waste ratio was optimized using a simplex axial mixture design. The results showed that the substrate mixture consisting of rice bran:corncob:cassava bagasse at 8?g:10?g:2?g yielded the highest enzyme production of 201.6?U/g dry solid. The optimized condition for solid-state fermentation was found as 65% initial moisture content, 35°C, initial pH of 6.0, and 5?×?10⁶ spores/mL inoculum, which gave the highest enzyme activity of 389.5?U/g dry solid. The enzyme showed high efficiency on saccharification of raw cassava starch and chips with synergistic activities of commercial α-amylase at 50°C, which promotes low-temperature bioethanol production. A high ethanol concentration of 102.2?g/L with 78% fermentation efficiency was achieved from modified simultaneous saccharification and fermentation using cofermentation of the enzymatic hydrolysate of 300?g raw cassava chips/L with cane molasses.     

Simultaneous saccharification and continuous fermentation of sludge-containing mash for bioethanol production by Saccharomyces cerevisiae CHFY0321

A continuous process was employed to improve the volumetric productivity of bioethanol production from cassava mash containing sludge and to simplify the process of ethanol production from cassava. After raw cassava powder was liquefied, it was used directly in a continuous process without sludge filtration or saccharification. A fermentor consisting of four linked stirrer tanks was used for simultaneous saccharification and continuous fermentation (SSCF). Although the mash contained sludge, continuous fermentation was successfully achieved. We chose the dilution rate on the basis of the maximum saccharification time; the highest volumetric productivity and ethanol yield were observed at a dilution rate of 0.028 h?1. The volumetric productivity, final ethanol concentration, and % of theoretical ethanol yield were 2.41 g/Lh, 86.1g/L, and 91%, respectively. This SSCF process using the self-flocculating yeast Saccharomyces cerevisiae CHFY0321 illustrates the possibility of realizing cost-effective bioethanol production by eliminating additional saccharification and filtration processes. In addition, flocculent CHFY0321, which our group developed, showed excellent fermentation results under continuous ethanol production.     

Production of ethanol from cassava whey

Investigations were conducted into the potential use of enzyme hydrolysed cassava whey for ethanol production by Saccharomyces cerevisiae Aspergillus niger grown on whct bran was used as crude enzyme source to saccharify the whey starch. The whey with an initial HCN concentration of 54.0μg/ml was fermented at pH 4.5 and 30°C in a one-step process to produce ethanol. A maximum ethanol concentration of 4.5% (v/v) was obtained in 120 h with a decrease in HCN level to 4.0 μg/ml. In a two-stage fermentation, in which the raw whey was pre-hydrolysed and under the same fermentation conditions, the unsterilized hydrolysate yielded alcohol content of 5.5% (v/v), while the sterilized hydrolysate gave higher alcohol yield, 7.5% (v/v), in 48 h. No HCN was detected in the fermented liquour at the end of the two-stage process.     

Improvement of ethanol yield from raw corn flour by <Emphasis Type="Italic">Rhizopus</Emphasis> sp.

A novel raw-starch-digesting glucoamylase producer, Rhizopus sp. W-08, and Saccharomyces cerevisiae Z-06 were used in a fed batch process for simultaneous saccharification and fermentation of raw corn flour. Ethanol concentration of 21% (v/v) was obtained after 48 h. The conversion efficiency of raw corn flour to ethanol was 94.5% of the theoretical ethanol yield.     

木薯粉同步糖化发酵(SSF)产丁二酸

【目的】通过优化产琥珀酸放线杆菌GXAS137同步糖化发酵木薯粉产丁二酸的发酵培养基,提高丁二酸产量,降低生产成本。【方法】在单因素试验的基础上,先利用Plackett-Burman试验设计筛选出影响丁二酸发酵的重要参数,再采用正交试验确定重要参数的最佳水平。【结果】价格低廉玉米浆可用作氮源,影响丁二酸产量的重要参数是木薯粉、玉米浆、碱式碳酸镁和糖化酶浓度。最佳条件为(g/L):木薯粉100,玉米浆14,糖化酶2.0 AGU/g底物,碱式碳酸镁75。优化后丁二酸产量达到69.31 g/L,丁二酸得率为90.01%,生产强度为1.44 g/(L·h)。与初始条件(52.34 g/L)相比,丁二酸浓度提高了32.42%。并利用1.3 L发酵罐对SSF与SHF两种发酵工艺进行了比较,SSF丁二酸产量(72.21 g/L)远高于SHF(56.86 g/L)。【结论】产琥珀酸放线杆菌同步糖化发酵木薯粉丁二酸产量高,生产成本低,具有较好的工业化应用前景。     

Production of alcohol from raw wheat flour by Amyloglucosidase and Saccharomyces cerevisiae

Ethanol production, by a simultaneous saccharification and fermentation process from raw wheat flour, has been performed by Saccharomyces cerevisiae and a low level of amyloglucosidase enzyme. The fermentation time was about 60 h after a 6 h pre-saccharification, with an amyloglucosidase (AMG) level of 270 AGU. kg(-1) starch, but only 31 h with a simultaneous saccharification fermentation process (SSF). When an AMG level of 540 AGU. kg(-1) starch was used, the time decreased to 21 h, giving an ethanol concentration of 67 g. l(-1). Sugar composition of the wort after the liquefaction may be responsible of the difference between these two process. Maltose, a fermentable sugar, was produced in high concentration during the liquefaction, allowing a shorter process period, counteracting the effect of the slow starch hydrolysis at 35 degrees C (SSF temperature).     

Optimization of fermentation conditions for the production of ethanol from sago starch using response surface methodology

The quantitative effects of temperature, pH and time of fermentation were investigated on simultaneous saccharification and fermentation (SSF) of ethanol from sago starch with glucoamylase (AMG) and Zymomonas mobilis ZM4 using a Box–Wilson central composite design protocol. The SSF process was studied using free enzyme and free cells and it was found that with sago starch, maximum ethanol concentration of 70.68 g/l was obtained using a starch concentration of 140 g/l, which represents an ethanol yield of 97.08%. The optimum conditions for the above yield were found to be a temperature of 36.74 °C, pH of 5.02 and time of fermentation of 17 h. Thus by using the central composite design, it is possible to determine the accurate values of the fermentation parameters where maximum production of ethanol occurs.     

Simultaneous enzymatic wheat starch saccharification and fermentation to lactic acid by Lactococcus lactis

Simultaneous saccharification of starch from whole-wheat flour and fermentation to lactic acid (SSF) was investigated. For saccharification the commercial enzyme mixture SAN Super 240 L, having α-amylase, amyloglucosidase and protease activity, was used, and Lactococcus lactis ssp. lactis ATCC 19435 was used for the fermentation. SSF was studied at flour concentrations corresponding to starch concentrations of 90 g/l and 180 g/l and SAN Super concentrations between 3 μl/g and 8 μl/g starch. Kinetic models, developed for the saccharification and fermentation, respectively, were used for simulation and data from SSF experiments were used for model verification. The model simulated SSF when sufficient amounts of nutrients were available during fermentation. This was achieved with high wheat flour concentrations or with addition of yeast extract or amino acids. Nutrient release was dependent on the level of enzyme activity. Received: 26 January 1999 / Accepted: 20 February 1999     

Ethanol production from paper material using a simultaneous saccharification and fermentation system in a fed-batch basis

In this work, a recycled paper-derived feedstock was used to produce ethanol by the simultaneous saccharification and fermentation (SSF) process using the thermotolerant yeast Kluyveromyces marxianus CECT 10875. At standard SSF conditions, the highest yield (about 80% of theoretical) was obtained at low substrate concentration and high enzyme loading. With increasing substrate concentration, mixing difficulties appeared which prevented an adequate SSF process performance and limited ethanol production. An SSF fed-batch procedure was then used which permitted an increase in substrate concentrations while maintaining SSF yields similar to that obtained at standard SSF, thus allowing an increased final ethanol production (about 18 g/l).     

Direct fermentation of raw starch using a Kluyveromyces marxianus strain that expresses glucoamylase and Alpha‐amylase to produce ethanol

Raw starch and raw cassava tuber powder were directly and efficiently fermented at elevated temperatures to produce ethanol using the thermotolerant yeast Kluyveromyces marxianus that expresses α‐amylase from Aspergillus oryzae as well as α‐amylase and glucoamylase from Debaryomyces occidentalis. Among the constructed K. marxianus strains, YRL 009 had the highest efficiency in direct starch fermentation. Raw starch from corn, potato, cassava, or wheat can be fermented at temperatures higher than 40°C. At the optimal fermentation temperature 42°C, YRL 009 produced 66.52 g/L ethanol from 200 g/L cassava starch, which was the highest production among the selected raw starches. This production increased to 79.75 g/L ethanol with a 78.3% theoretical yield (with all cassava starch were consumed) from raw cassava starch at higher initial cell densities. Fermentation was also carried out at 45 and 48°C. By using 200 g/L raw cassava starch, 137.11 and 87.71 g/L sugar were consumed with 55.36 and 32.16 g/L ethanol produced, respectively. Furthermore, this strain could directly ferment 200 g/L nonsterile raw cassava tuber powder (containing 178.52 g/L cassava starch) without additional nutritional supplements to produce 69.73 g/L ethanol by consuming 166.07 g/L sugar at 42°C. YRL 009, which has consolidated bioprocessing ability, is the best strain for fermenting starches at elevated temperatures that has been reported to date. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:338–347, 2014     

Selection and characterization of a newly isolated thermotolerant Pichia kudriavzevii strain for ethanol production at high temperature from cassava starch hydrolysate

Pichia kudriavzevii DMKU 3-ET15 was isolated from traditional fermented pork sausage by an enrichment technique in a yeast extract peptone dextrose (YPD) broth, supplemented with 4 % (v/v) ethanol at 40 °C and selected based on its ethanol fermentation ability at 40 °C in YPD broth composed of 16 % glucose, and in a cassava starch hydrolysate medium composed of cassava starch hydrolysate adjusted to 16 % glucose. The strain produced ethanol from cassava starch hydrolysate at a high temperature up to 45 °C, but the optimal temperature for ethanol production was at 40 °C. Ethanol production by this strain using shaking flask cultivation was the highest in a medium containing cassava starch hydrolysate adjusted to 18 % glucose, 0.05 % (NH₄)₂SO₄, 0.09 % yeast extract, 0.05 % KH₂PO₄, and 0.05 % MgSO₄·7H₂O, with a pH of 5.0 at 40 °C. The highest ethanol concentration reached 7.86 % (w/v) after 24 h, with productivity of 3.28 g/l/h and yield of 85.4 % of the theoretical yield. At 42 °C, ethanol production by this strain became slightly lower, while at 45 °C only 3.82 % (w/v) of ethanol, 1.27 g/l/h productivity and 41.5 % of the theoretical yield were attained. In a study on ethanol production in a 2.5-l jar fermenter with an agitation speed of 300 rpm and an aeration rate of 0.1 vvm throughout the fermentation, P. kudriavzevii DMKU 3-ET15 yielded a final ethanol concentration of 7.35 % (w/v) after 33 h, a productivity of 2.23 g/l/h and a yield of 79.9 % of the theoretical yield.     

Optimization of process variables for minimization of byproduct formation during fermentation of blackstrap molasses to ethanol at industrial scale

Aims: To investigate the effect of molasses concentration, initial pH of molasses medium, and inoculum’s size to maximize ethanol and minimize methanol, fusel alcohols, acetic acid and aldehydes in the fermentation mash in industrial fermentors. Methods and Results: Initial studies to optimize temperature, nitrogen source, phosphorous source, sulfur supplement and minerals were performed. The essential nutrients were urea (2 kg in 60 m³), 0·5 l each of commercial phosphoric acid and sulfuric acid (for pH control) added at the inoculum preparation stage only. Yields of ethanol, methanol, fusel alcohols, total acids and aldehydes per 100‐l fermentation broth were monitored. Molasses at 29°Brix (degree of dissolved sugars in water), initial pH 4·5, inoculum size 30% (v/v) and anaerobic fermentation supported maximum ethanol (7·8%) with Y_P/S = 238 l ethanol per tonne molasses (96·5% yield) (8·2% increase in yield), and had significantly lower values of byproducts than those in control experiments. Conclusions: Optimization of process variables resulted in higher ethanol yield (8·2%) and reduced yield of methanol, fusel alcohols, acids and aldehydes. Significance and Impact of the Study: More than 5% substrate is converted into byproducts. Eliminating or reducing their formation can increase ethanol yield by Saccharomyces cerevisiae, decrease the overall cost of fermentation process and improve the quality of ethanol.     

Ethanol production from native cassava starch by a mixed culture of Endomycopsis fibuligera and Zymomonas mobilis

The conversion of starch from unhydrolyzed cassava flour to ethanol by a pure culture of Endomycopsis fibuligera and by a co-culture of this amylolytic yeast and the bacterium Zymomonas mobilis was studied. The best overall results were obtained using the mixed culture. After 96 h of fermentation of a medium containing 150 g/l initial cassava starch, an ethanol concentration of 31.4 g/l, a productivity of 0.33 g ethanol/l × h and a yield of 0.21 g ethanol/g initial starch were reached. The highest yield (0.37 g/g) was obtained after 48 h when using a medium containing 50 g/l initial starch.     

Optimization of bioethanol production during simultaneous saccharification and fermentation in very high-gravity cassava mash

Hydrolysis and fermentation conditions for production of ethanol from very high-gravity cassava mash by Saccharomyces cerevisiae during simultaneous saccharification and fermentation (SSF) processing were optimized using a statistical methodology. During the first part of the study, Placket–Burman design (PBD) was used to study 19 factors that could potentially influence ethanol production. Gravity, particle size, initial pH, and fermentation temperature were identified as key factors that significantly increased final ethanol concentration. The main and interaction effects of these factors were subsequently evaluated based on a quadratic equation generated by central composite design (CCD) using response-surface methodology (RSM). Under the optimized very high-gravity conditions, the final ethanol concentration obtained from experiment increased from 8.21% (wt.%) to 15.03% (wt.%) and was in good agreement with model prediction. By employing two other commercial Saccharomyces strains, similar results were obtained under the same optimized condition. Therefore, we conclude that final ethanol concentration, ethanol productivity (V _P/max), glucose utilization (Y _G/s, Y _P/s), and fermentation efficiency (η _f) were enhanced or maintained under the optimized condition of 40% gravity, 390 μm particle size, initial pH 5.5, and 27°C fermentation temperature.     

响应面法优化耐高温酵母生产高浓度乙醇

利用耐高温酵母GXASY-10菌株对木薯粉同步糖化(SSF)法生产高浓度乙醇的发酵条件进行了优化。在单因素实验的基础上,首先应用Plackett-Burman试验设计筛选影响酒精高温高浓度发酵的重要参数,采用最陡爬坡实验逼近最大酒精生产区域后,利用Box-Behnken设计确定重要参数的最佳水平。筛选结果表明,影响酒精产量的重要参数是液化时间、糖化酶用量和初始木薯粉(底物)浓度。最佳工艺条件为:液化时间为35min,糖化酶添加量为1.21AGU/g底物,底物浓度为37.62%。20L发酵罐在此条件下(发酵温度37℃,转速100r/min)经过48h发酵,酒精浓度可达16.07%(V/W)。优化条件与初始条件相比较,酒精浓度提高了33%。