Hydrogen exchange and proteolytic degradation of ribonuclease A. The local splitting of the native structure and the conformation of loop segments

The limited proteolytic sites or nicksites are present only in one of the five loops of the RNase A molecule. The splitted loop 15–23 connects two structural domains in the hinge region of the interdomain contacts of the V-shaped molecule. The other four loops are inside two domains, 64–71 and 112–115 in the domain I (1–19, 47–81, 102–106) and 36–42 and 88–95 in the domain II (20–46, 82–101). Because of enhanced chain flexibility of the splitted loop in the pH-dependent conformational isomerization, deformation of its structure is slighter under the influence of the intermolecular contacts in the crystal lattice and more significant changes occur in loop conformation at the formation of the 3D swapped dimer of the RNase A molecule. The proteolytic splitting of the 15–23 loop proceeds due to the local fluctuation of the native protein structure.     

Hydrogen exchange and the proteolytic degradation of ribonuclease A. The position of the centers of the high-temperature splitting by proteases and the structure of denatured molecules

The information on the high-temperature proteolytic degradation of RNase A has been analyzed. It has been shown that a few peptide bonds primarily splitted by trypsin, chymotrypsin and thermolysin are localized only in the N-terminal part of structural domain II of the native molecule. The same peptide bonds are splitted by proteases with the highest rate upon the denaturation in the presense of trifluoroethanol or the renaturation from concentrated urea solutions and after the desorganization of the native structure by the reduction of all four S-S bonds of RNase A. According to the data on hydrogen exchange in the native RNase A molecule, the dynamic stability of the tertiary structure of domain II is lower than that of domain I because of the lesser amount of the internal bulky nonpolar residues Val, Ile, and Phe. For the same reason, this part of the molecule in different nonnative forms of RNase A is less compact and more flexible and is splitted with the highest rate in the segment 31-39 enriched by long cationic residues Lys and Arg. A common feature of the conformation of the flexible disordered backbone of all RNase A nonnative structures considered is the predominance of short PPII helices, which provides a high rate of the restoration of the native secondary and tertiary structures upon renaturation or self-organization and global fluctuations of the native structure revealed by the hydrogen exchange and proteolytic degradation.     

Structural basis of inhibition revealed by a 1:2 complex of the two-headed tomato inhibitor-II and subtilisin Carlsberg

Multidomain proteinase inhibitors play critical roles in the defense of plants against predation by a wide range of pests. Despite a wealth of structural information on proteinase-single domain inhibitor interactions, the structural basis of inhibition by multidomain proteinase inhibitors remains poorly understood. Here we report the 2.5-A resolution crystal structure of the two-headed tomato inhibitor-II (TI-II) in complex with two molecules of subtilisin Carlsberg; it reveals how a multidomain inhibitor from the Potato II family of proteinase inhibitors can bind to and simultaneously inhibit two enzyme molecules within a single ternary complex. The N terminus of TI-II initiates the folding of Domain I (Lys-1 to Cys-15 and Pro-84 to Met-123) and then completes Domain II (Ile-26 to Pro-74) before coming back to complete the rest of Domain I (Pro-84 to Met-123). The two domains of TI-II adopt a similar fold and are arranged in an extended configuration that presents two reactive site loops at the opposite ends of the inhibitor molecule. Each subtilisin molecule interacts with a reactive site loop of TI-II through the standard, canonical binding mode. Remarkably, a significant distortion of the active site of subtilisin is induced by the presence of phenylalanine in the P1 position of reactive site loop II of TI-II. The structure of the TI-II.(subtilisin)2 complex provides a molecular framework for understanding how multiple inhibitory domains in a single Potato II type proteinase inhibitor molecule from the Potato II family act to inhibit proteolytic enzymes.     

X-ray structure of simian immunodeficiency virus integrase containing the core and C-terminal domain (residues 50-293)--an initial glance of the viral DNA binding platform

The crystal structure of simian immunodeficiency virus (SIV) integrase that contains in a single polypeptide the core and the C-terminal deoxyoligonucleotide binding domain has been determined at 3 A resolution with an R-value of 0.203 in the space group P2(1)2(1)2(1). Four integrase core domains and one C-terminal domain are found to be well defined in the asymmetric unit. The segment extending from residues 114 to 121 assumes the same position as seen in the integrase core domain of avian sarcoma virus as well as human immunodeficiency virus type-1 (HIV-1) crystallized in the absence of sodium cacodylate. The flexible loop in the active site, composed of residues 141-151, remains incompletely defined, but the location of the essential Glu152 residue is unambiguous. The residues from 210-218 that link the core and C-terminal domains can be traced as an extension from the core with a short gap at residues 214-215. The C(alpha) folding of the C-terminal domain is similar to the solution structure of this domain from HIV-1 integrase. However, the dimeric form seen in the NMR structure cannot exist as related by the non-crystallographic symmetry in the SIV integrase crystal. The two flexible loops of the C-terminal domain, residues 228-236 and residues 244-249, are much better fixed in the crystal structure than in the NMR structure with the former in the immediate vicinity of the flexible loop of the core domain. The interface between the two domains encompasses a solvent-exclusion area of 1500 A(2). Residues from both domains purportedly involved in DNA binding are narrowly distributed on the same face of the molecule. They include Asp64, Asp116, Glu152 and Lys159 from the core and Arg231, Leu234, Arg262, Arg263 and Lys264 from the C-terminal domain. A model for DNA binding is proposed to bridge the two domains by tethering the 228-236 loop of the C-terminal domain and the flexible loop of the core.     

A single-domain antibody fragment in complex with RNase A: non-canonical loop structures and nanomolar affinity using two CDR loops

BACKGROUND: Camelid serum contains a large fraction of functional heavy-chain antibodies - homodimers of heavy chains without light chains. The variable domains of these heavy-chain antibodies (VHH) have a long complementarity determining region 3 (CDR3) loop that compensates for the absence of the antigen-binding loops of the variable light chains (VL). In the case of the VHH fragment cAb-Lys3, part of the 24 amino acid long CDR3 loop protrudes from the antigen-binding surface and inserts into the active-site cleft of its antigen, rendering cAb-Lys3 a competitive enzyme inhibitor. RESULTS: A dromedary VHH with specificity for bovine RNase A, cAb-RN05, has a short CDR3 loop of 12 amino acids and is not a competitive enzyme inhibitor. The structure of the cAb-RN05-RNase A complex has been solved at 2.8 A. The VHH scaffold architecture is close to that of a human VH (variable heavy chain). The structure of the antigen-binding hypervariable 1 loop (H1) of both cAb-RN05 and cAb-Lys3 differ from the known canonical structures; in addition these H1 loops resemble each other. The CDR3 provides an antigen-binding surface and shields the face of the domain that interacts with VL in conventional antibodies. CONCLUSIONS: VHHs adopt the common immunoglobulin fold of variable domains, but the antigen-binding loops deviate from the predicted canonical structure. We define a new canonical structure for the H1 loop of immunoglobulins, with cAb-RN05 and cAb-Lys3 as reference structures. This new loop structure might also occur in human or mouse VH domains. Surprisingly, only two loops are involved in antigen recognition; the CDR2 does not participate. Nevertheless, the antigen binding occurs with nanomolar affinities because of a preferential usage of mainchain atoms for antigen interaction.     

Loop folds in proteins and evolutionary conservation of folding nuclei

We show that loops of close contacts involving hydrophobic residues are important in protein folding. Contrary to Berezovsky Berezovsky and Trifonov (J Biomol Struct Dyn 20, 5-6, 2002) the loops important in protein folding usually are much larger in size than 23-31 residues, being instead comparable to the size of the protein for single domain proteins. Additionally what is important are not single loop contacts, but a highly interconnected network of such loop contacts, which provides extra stability to a protein fold and which leads to their conservation in evolution.     

The polypeptide fold of the globular domain of histone H5 in solution. A study using nuclear magnetic resonance, distance geometry and restrained molecular dynamics.

The polypeptide fold of the 79-residue globular domain of chicken histone H5 (GH5) in solution has been determined by the combined use of distance geometry and restrained molecular dynamics calculations. The structure determination is based on 307 approximate interproton distance restraints derived from n.m.r. measurements. The structure is composed of a core made up of residues 3-18, 23-34, 37-60 and 71-79, and two loops comprising residues 19-22 and 61-70. The structure of the core is well defined with an average backbone atomic r.m.s. difference of 2.3 +/- 0.3 A between the final eight converged restrained dynamics structures and the mean structure obtained by averaging their coordinates best fitted to the core residues. The two loops are also well defined locally but their orientation with respect to the core could not be determined as no long range ([i-j[ greater than 5) proton-proton contacts could be observed between the loop and core residues in the two-dimensional nuclear Overhauser enhancement spectra. The structure of the core is dominated by three helices and has a similar fold to the C-terminal DNA binding domain of the cAMP receptor protein.     

Structural differences in the DNA binding domains of human p53 and its C. elegans ortholog Cep-1

The DNA binding domains of human p53 and Cep-1, its C. elegans ortholog, recognize essentially identical DNA sequences despite poor sequence similarity. We solved the three-dimensional structure of the Cep-1 DNA binding domain in the absence of DNA and compared it to that of human p53. The two domains have similar overall folds. However, three loops, involved in DNA and Zn binding in human p53, contain small alpha helices in Cep-1. The alpha helix in loop L3 of Cep-1 orients the side chains of two conserved arginines toward DNA; in human p53, both arginines are mutation hotspots, but only one contacts DNA. The alpha helix in loop L1 of Cep-1 repositions the entire loop, making it unlikely for residues of this loop to contact bases in the major groove of DNA, as occurs in human p53. Thus, during evolution there have been considerable changes in the structure of the p53 DNA binding domain.     

Isolation and structural and functional characterization of two stable peptic fragments of human alpha-fetoprotein.

Short-time limited peptic hydrolysis of ligand-free human alpha-fetoprotein (AFP) gave two main fragments with molecular masses of 38 and 32 kDa, which had been produced by splitting of the molecule at the position Leu(312)-Asn(313). A more prolonged proteolysis led to the further degradation of these fragments and appearance of highly proteolytically resistant 23-kDa (P23) and 26-kDa (P26) fragments, corresponding to N- and C-terminal parts of the AFP molecule, respectively. Comparative study of intact free of ligands AFP and isolated stable P23 and P26 fragments by circular dichroism, differential scanning calorimetry, and immunoprecipitation techniques demonstrated that these fragments conserved native secondary, tertiary; and antigenic structure, characteristic of the intact molecule. It was concluded that, free of ligands, the AFP molecule could be considered as a three-domain molecule, in which two compact rigid domains (N-terminal domain I and C-terminal domain III) are connected by relatively labile domain II. The structure of domain II could be approximated by a "molten globule" state, characterized by the absence of rigid tertiary structure but having a pronounced secondary structure. Tumor-suppressive activity via induction of apoptosis was recently shown for AFP [Dudich, E. I., et al. (1998) Tumor Biol. 19, 261-272]. We studied here the ability of isolated proteolytic AFP fragments to induce apoptosis in the AFP-sensitive Raji cell line, to determine possible localization of the active site responsible for apoptosis signaling. Unlike intact AFP, neither isolated fragments nor their equimolar mixture was able to induce apoptosis in a human lymphoma Raji cell line. However, it was demonstrated that both fragments P23 or P26 and their equimolar mixture P23 + P26 operated synergistically with intact AFP in suppression of Raji cell proliferation. These data suggested that two structurally determined requirements are necessary for AFP-mediated triggering of apoptosis: (i) dimerization of AFP to form the heterodimeric complex of C- and N-terminal domains and (ii) participation of the central part of AFP molecule (domain II).     

Structure and dynamics of the second and third transmembrane domains of human glycine receptor

A 61-residue polypeptide resembling the second and third transmembrane domains (TM23) of the alpha-1 subunit of human glycine receptor and its truncated form, both with the wild-type loop linking the two TM domains (the "23" loop), were studied using high-resolution NMR. Well-defined domain structures can be identified for the TM2, 23 loop, and TM3 regions. Contrary to the popular model of a long and straight alpha-helical structure for the pore-lining TM2 domain for the Cys-loop receptor family, the last three residues of the TM2 domain and the first eight residues of the 23 loop (S16-S26) seem to be intrinsically nonhelical and highly flexible even in trifluoroethanol, a solvent known to promote and stabilize alpha-helical structures. The six remaining residues of the 23 loop and most of the TM3 domain exhibit helical structures with a kinked pi-helix (or a pi-turn) from W34 to C38 and a kink angle of 159 +/- 3 degrees . The tertiary fold of TM3 relative to TM2 is defined by several unambiguously identified long-range NOE cross-peaks within the loop region and between TM2 and TM3 domains. The 20 lowest-energy structures show a left-handed tilt of TM3 relative to TM2 with a tilting angle of 44 +/- 2 degrees between TM2 (V1-Q14) and TM3 (L39-E48) helix axes. This left-handed TM2-TM3 arrangement ensures a neatly packed right-handed quaternary structure of five subunits to form an ion-conducting pore. This is the first time that two TM domains of the glycine receptor linked by the important 23 loop have ever been analyzed at atomistic resolution. Many structural characteristics of the receptor can be inferred from the structural and dynamical features identified in this study.     

The I domain of the AAA+ HslUV protease coordinates substrate binding, ATP hydrolysis, and protein degradation

In the AAA+ HslUV protease, substrates are bound and unfolded by a ring hexamer of HslU, before translocation through an axial pore and into the HslV degradation chamber. Here, we show that the N-terminal residues of an Arc substrate initially bind in the HslU axial pore, with key contacts mediated by a pore loop that is highly conserved in all AAA+ unfoldases. Disordered loops from the six intermediate domains of the HslU hexamer project into a funnel-shaped cavity above the pore and are positioned to contact protein substrates. Mutations in these I-domain loops increase K(M) and decrease V(max) for degradation, increase the mobility of bound substrates, and prevent substrate stimulation of ATP hydrolysis. HslU-ΔI has negligible ATPase activity. Thus, the I domain plays an active role in coordinating substrate binding, ATP hydrolysis, and protein degradation by the HslUV proteolytic machine.     

The primary and secondary structure of yeast 26S rRNA.

We present the sequence of the 26S rRNA of the yeast Saccharomyces carlsbergensis as inferred from the gene sequence. The molecule is 3393 nucleotides long and consists of 48% G+C; 30 of the 43 methyl groups can be located in the sequence. Starting from the recently proposed structure of E. coli 23S rRNA (see ref. 25) we constructed a secondary structure model for yeast 26S rRNA. This structure is composed of 7 domains closed by long-range base pairings as n the bacterial counterpart. Most domains show considerable conservation of the overall structure; unpaired regions show extended sequence homology and the base-paired regions contain many compensating base pair changes. The extra length of the yeast molecule is due to a number of insertions in most of the domains, particularly in domain II. Domain VI, which is extremely conserved, is probably part of the ribosomal A site. alpha-Sarcin, which apparently inhibits the EF-1 dependent binding of aminoacyl-tRNA, causes a cleavage between position 3025 and 3026 in a conserved loop structure, just outside domain VI. Nearly all of the located methyl groups, like in E. coli, are present in domain II, V and VI and clustered to a certain extent mainly in regions with a strongly conserved primary structure. The only three methyl groups of 26S rRNA which are introduced relatively late during the processing are found in single stranded loops in domain VI very close to positions which have been shown in E. coli 23S rRNA to be at the interface of the ribosome.     

The UAA/GAN internal loop motif: a new RNA structural element that forms a cross-strand AAA stack and long-range tertiary interactions

Analysis of aligned RNA sequences and high-resolution crystal structures has revealed a new RNA structural element, termed the UAA/GAN motif. Found in internal loops of the 23 S rRNA, as well as in RNase P RNA and group I and II introns, this six-nucleotide motif adopts a distinctive local structure that includes two base-pairs with non-canonical conformations and three conserved adenine bases, which form a cross-strand AAA stack in the minor groove. Most importantly, the motif invariably forms long-range tertiary contacts, as the AAA stack typically forms A-minor interactions and the flipped-out N nucleotide forms additional contacts that are specific to the structural context of each loop. The widespread presence of this motif and its propensity to form long-range contacts suggest that it plays a critical role in defining the architectures of structured RNAs.     

The three-dimensional solution structure and dynamic properties of the human FADD death domain

FADD (also known as MORT-1) is an essential adapter protein that couples the transmembrane receptors Fas (CD95) and tumor necrosis factor receptor-1 (TNF-R1) to intracellular cysteine proteases known as caspases, which propagate and execute the programmed cell death-inducing signal triggered by Fas ligand (FasL, CD95L) and TNF. FADD contains 208 amino acid residues, and comprises two functionally and structurally distinct domains: an N-terminal death effector domain (DED) that promotes activation of the downstream proteolytic cascade through binding of the DED domains of procaspase-8; and a C-terminal death domain (DD). FADD-DD provides the site of FADD recruitment to death receptor complexes at the plasma membrane by, for example, interaction with the Fas receptor cytoplasmic death domain (Fas-DD), or binding of the TNF-R1 adapter molecule TRADD. We have determined the three-dimensional solution structure and characterised the internal polypeptide dynamics of human FADD-DD using heteronuclear NMR spectroscopy of (15)N and (13)C,(15)N-labelled samples. The structure comprises six alpha-helices joined by short loops and displays overall similarity to the death domain of the Fas receptor. The analysis of the dynamic properties reveals no evidence of contiguous stretches of polypeptide chain with increased internal motion, except at the extreme chain termini. A pattern of increased rates of amide proton solvent exchange in the alpha3 helix correlates with a higher degree of solvent exposure for this secondary structure element. The properties of the FADD-DD structure are discussed with respect to previously reported mutagenesis data and emerging models for FasL-induced FADD recruitment to Fas and caspase-8 activation.     

Structural characterization of the RNase E S1 domain and identification of its oligonucleotide-binding and dimerization interfaces

S1 domains occur in four of the major enzymes of mRNA decay in Escherichia coli: RNase E, PNPase, RNase II, and RNase G. Here, we report the structure of the S1 domain of RNase E, determined by both X-ray crystallography and NMR spectroscopy. The RNase E S1 domain adopts an OB-fold, very similar to that found with PNPase and the major cold shock proteins, in which flexible loops are appended to a well-ordered five-stranded beta-barrel core. Within the crystal lattice, the protein forms a dimer stabilized primarily by intermolecular hydrophobic packing. Consistent with this observation, light-scattering, chemical crosslinking, and NMR spectroscopic measurements confirm that the isolated RNase E S1 domain undergoes a specific monomer-dimer equilibrium in solution with a K(D) value in the millimolar range. The substitution of glycine 66 with serine dramatically destabilizes the folded structure of this domain, thereby providing an explanation for the temperature-sensitive phenotype associated with this mutation in full-length RNase E. Based on amide chemical shift perturbation mapping, the binding surface for a single-stranded DNA dodecamer (K(D)=160(+/-40)microM) was identified as a groove of positive electrostatic potential containing several exposed aromatic side-chains. This surface, which corresponds to the conserved ligand-binding cleft found in numerous OB-fold proteins, lies distal to the dimerization interface, such that two independent oligonucleotide-binding sites can exist in the dimeric form of the RNase E S1 domain. Based on these data, we propose that the S1 domain serves a dual role of dimerization to aid in the formation of the tetrameric quaternary structure of RNase E as described by Callaghan et al. in 2003 and of substrate binding to facilitate RNA hydrolysis by the adjacent catalytic domains within this multimeric enzyme.     

R‐loop induced stress response by second (p)ppGpp synthetase in Mycobacterium smegmatis: functional and domain interdependence

Persistent R‐loops lead to replicative stress due to RNA polymerase stalling and DNA damage. RNase H enzymes facilitate the organisms to survive in the hostile condition by removing these R‐loops. MS_RHII‐RSD was previously identified to be the second (p)ppGpp synthetase in Mycobacterium smegmatis. The unique presence of an additional RNase HII domain raises an important question regarding the significance of this bifunctional protein. In this report, we demonstrate its ability to hydrolyze R‐loops in Escherichia coli exposed to UV stress. MS_RHII‐RSD gene expression was upregulated under UV stress, and this gene deleted strain showed increased R‐loop accumulation as compared to the wild type. The domains in isolation are known to be inactive, and the full length protein is required for its function. Domain interdependence studies using active site mutants reveal the necessity of a hexamer form with high alpha helical content. In previous studies, bacterial RNase type HI has been mainly implicated in R‐loop hydrolysis, but in this study, the RNase HII domain containing protein showed the activity. The prospective of this differential RNase HII activity is discussed. This is the first report to implicate a (p)ppGpp synthetase protein in R‐loop‐induced stress response.     

Crystal structure of the SH3 domain in human Fyn; comparison of the three-dimensional structures of SH3 domains in tyrosine kinases and spectrin.

The Src-homology 3 (SH3) region is a protein domain consisting of approximately 60 residues. It occurs in a large number of eukaryotic proteins involved in signal transduction, cell polarization and membrane--cytoskeleton interactions. The function is unknown, but it is probably involved in specific protein--protein interactions. Here we report the crystal structure of the SH3 domain of Fyn (a Src family tyrosine kinase) at 1.9 A resolution. The crystals have two SH3 molecules per asymmetric unit. These two Fyn SH3 domains are not related by a local twofold axis. The crystal structures of spectrin and Fyn SH3 domains as well as the solution structure of the Src SH3 domain show that these all have the same basic fold. A protein domain which has the same topology as SH3 is present in the prokaryotic regulatory enzyme BirA. The comparison between the crystal structures of Fyn and spectrin SH3 domains shows that a conserved surface patch, consisting mainly of aromatic residues, is flanked by two hairpin-like loops (residues 94-104 and 114-118 in Fyn). These loops are different in tyrosine kinase and spectrin SH3 domains. They could modulate the binding properties of the aromatic surface.     

Structure of the phylogenetically most conserved domain of SRP RNA

The signal recognition particle (SRP) is a phylogenetically conserved ribonucleoprotein required for cotranslational targeting of proteins to the membrane of the endoplasmic reticulum of the bacterial plasma membrane. Domain IV of SRP RNA consists of a short stem-loop structure with two internal loops that contain the most conserved nucleotides of the molecule. All known essential interactions of SRP occur in that moiety containing domain IV. The solution structure of a 43-nt RNA comprising the complete Escherichia coli domain IV was determined by multidimensional NMR and restrained molecular dynamics refinement. Our data confirm the previously determined rigid structure of a smaller subfragment containing the most conserved, symmetric internal loop A (Schmitz et al., Nat Struct Biol, 1999, 6:634-638), where all conserved nucleotides are involved in nucleotide-specific structural interactions. Asymmetric internal loop B provides a hinge in the RNA molecule; it is partially flexible, yet also uniquely structured. The longer strand of internal loop B extends the major groove by creating a ledge-like arrangement; for loop B however, there is no obvious structural role for the conserved nucleotides. The structure of domain IV suggests that loop A is the initial site for the RNA/protein interaction creating specificity, whereas loop B provides a secondary interaction site.     

Structure of a specific peptide complex of the carboxy-terminal SH2 domain from the p85 alpha subunit of phosphatidylinositol 3-kinase.

We have determined the solution structure of the C-terminal SH2 domain of the p85 alpha subunit of human phosphatidylinositol (PI) 3-kinase (EC 2.7.1.137) in complex with a phosphorylated tyrosine pentapeptide sequence from the platelet-derived growth factor receptor using heteronuclear nuclear magnetic resonance spectroscopy. Overall, the structure is similar to other SH2 domain complexes, but displays different detail interactions within the phosphotyrosine binding site and in the recognition site for the +3 methionine residue of the peptide, the side chain of which inserts into a particularly deep and narrow pocket which is displaced relative to that of other SH2 domains. The contacts made within this +3 pocket provide the structural basis for the strong selection for methionine at this position which characterizes the SH2 domains of PI3-kinase. Comparison with spectral and structural features of the uncomplexed domain shows that the long BG loop becomes less mobile in the presence of the bound peptide. In contrast, extreme resonance broadening encountered for most residues in the beta D', beta E and beta F strands and associated connecting loops of the domain in the absence of peptide persists in the complex, implying conformational averaging in this part of the molecule on a microsecond-to-millisecond time scale.