Ligand binding and physico-chemical properties of ASP2, a recombinant odorant-binding protein from honeybee (Apis mellifera L.).

In insects, the transport of airborne, hydrophobic odorants and pheromones through the sensillum lymph is generally thought to be accomplished by odorant-binding proteins (OBPs). We report the structural and functional properties of a honeybee OBP called ASP2, heterologously expressed by the yeast Pichia pastoris. ASP2 disulfide bonds were assigned after classic trypsinolysis followed by ion-spray mass spectrometry combined with microsequencing. The pairing [Cys(I)-Cys(III), Cys(II)-Cys(V), Cys(IV)-Cys(VI)] was found to be identical to that of Bombyx mori OBP, suggesting that this pattern occurs commonly throughout the highly divergent insect OBPs. CD measurements revealed that ASP2 is mainly constituted of alpha helices, like other insect OBPs, but different from lipocalin-like vertebrate OBPs. Gel filtration analysis showed that ASP2 is homodimeric at neutral pH, but monomerizes upon acidification or addition of a chaotropic agent. A general volatile-odorant binding assay allowed us to examine the uptake of some odorants and pheromones by ASP2. Recombinant ASP2 bound all tested molecules, except beta-ionone, which could not interact with it at all. The affinity constants of ASP2 for these ligands, determined at neutral pH by isothermal titration calorimetry, are in the micromolar range, as observed for vertebrate OBP. These results suggest that odorants occupy three binding sites per dimer, probably one in the core of each monomer and another whose location and biological role are questionable. At acidic pH, no binding was observed, in correlation with monomerization and a local conformational change supported by CD experiments.     

Characterization of a chemosensory protein (ASP3c) from honeybee (Apis mellifera L.) as a brood pheromone carrier.

Chemosensory proteins (CSPs) are ubiquitous soluble small proteins isolated from sensory organs of a wide range of insect species, which are believed to be involved in chemical communication. We report the cloning of a honeybee CSP gene called ASP3c, as well as the structural and functional characterization of the encoded protein. The protein was heterologously secreted by the yeast Pichia pastoris using the native signal peptide. ASP3c disulfide bonds were assigned after trypsinolysis followed by chromatography and mass spectrometry combined with microsequencing. The pairing (Cys(I)-Cys(II), Cys(III)-Cys(IV)) was found to be identical to that of Schistocerca gregaria CSPs, suggesting that this pattern occurs commonly throughout the insect CSPs. CD measurements revealed that ASP3c mainly consists of alpha-helices, like other insect CSPs. Gel filtration analysis showed that ASP3c is monomeric at neutral pH. Using ASA, a fluorescent fatty acid anthroyloxy analogue as a probe, ASP3c was shown to bind specifically to large fatty acids and ester derivatives, which are brood pheromone components, in the micromolar range. It was unable to bind tested general odorants and other tested pheromones (sexual and nonsexual). This is the first report on a natural pheromonal ligand bound by a recombinant CSP with a measured affinity constant.     

Structural analysis and disulfide-bridge pairing of two odorant-binding proteins from Bombyx mori

Pheromone-binding protein (PBP) and general odorant-binding proteins (GOBPs) were purified from the antennae of Bombyx mori and structurally characterised. The amino acid sequence of GOBP-2 has been corrected. The disulphide arrangements of PBP and GOBP-2 have been determined by a combined mass spectrometric/Edman degradation approach. The same cysteine pairings, Cys19-Cys54, Cys50-Cys108, and Cys97-Cys117, were found in both proteins, suggesting that such patterns occur commonly throughout this family of molecules. This arrangement of disulphide bonds indicates that the three-dimensional structure of insect OBPs is defined by three loops, rich in helical content, which can vary in size and charge distribution from one protein to another.     

Isotopic double-labeling of two honeybee odorant-binding proteins secreted by the methylotrophic yeast Pichia pastoris

Odorant-binding proteins (OBPs) are soluble, low-molecular-weight proteins secreted in the sensillum lymph surrounding the dendrites of olfactory sensilla from a wide range of insect species. These proteins play a role in the solubilization, transport and/or deactivation of pheromones and odorants. In order to study the relationships between the molecular structure in solution and their ligand-binding properties, we have (13)C/(15)N-double-labeled two divergent honeybee OBPs, called ASP1 and ASP2, in sufficient quantities to permit a full determination of the structure and dynamics using heteronuclear NMR spectroscopy. The recombinant labeled proteins produced by the methylotrophic yeast Pichia pastoris have been secreted into a buffered minimal medium using native insect signal peptide. Mass spectrometry and Edman sequencing showed a native-like processing with a labeling efficiency of secreted proteins greater than 98%. After dialysis, the recombinant proteins were purified to homogeneity by one-step reversed-phase liquid chromatography. The final yield after 4-day shake-flask liquid culture was approximately 60 and 100 mg/L for ASP1 and ASP2, respectively. The inexpensive overproduction of labeled recombinant ASP1 and ASP2 should allow NMR studies of the structures and ligand-binding analysis in order to understand the relationships between structure and biological function of these proteins.     

Disulfide transfer between two conserved cysteine pairs imparts selectivity to protein oxidation by Ero1

The membrane-associated flavoprotein Ero1p promotes disulfide bond formation in the endoplasmic reticulum (ER) by selectively oxidizing the soluble oxidoreductase protein disulfide isomerase (Pdi1p), which in turn can directly oxidize secretory proteins. Two redox-active disulfide bonds are essential for Ero1p oxidase activity: Cys100-Cys105 and Cys352-Cys355. Genetic and structural data indicate a disulfide bond is transferred from Cys100-Cys105 directly to Pdi1p, whereas a Cys352-Cys355 disulfide bond is used to reoxidize the reduced Cys100-Cys105 pair through an internal thiol-transfer reaction. Electron transfer from Cys352-Cys355 to molecular oxygen, by way of a flavin cofactor, maintains Cys352-Cys355 in an oxidized form. Herein, we identify a mixed disulfide species that confirms the Ero1p intercysteine thiol-transfer relay in vivo and identify Cys105 and Cys352 as the cysteines that mediate thiol-disulfide exchange. Moreover, we describe Ero1p mutants that have the surprising ability to oxidize substrates in the absence of Cys100-Cys105. We show the oxidase activity of these mutants results from structural changes in Ero1p that allow substrates increased access to Cys352-Cys355, which are normally buried beneath the protein surface. The altered activity of these Ero1p mutants toward selected substrates leads us to propose the catalytic mechanism involving transfer between cysteine pairs evolved to impart substrate specificity to Ero1p.     

Isolation and characterization of disulfide-bonded peptides from the three globular domains of aggregating cartilage proteoglycan

The aggregating cartilage proteoglycan core protein contains two globular domains near the N terminus (G1 and G2) and one near the C terminus (G3). The G1-G3 domains contain 10, 8, and 10 cysteine residues, respectively. The disulfide assignments of the G1 domain have previously been deduced (Neame, P. J., Christner, J. E., and Baker, J. R. (1987) J. Biol. Chem. 262, 17768-17778) as Cys1-Cys2, Cys3-Cys6, Cys4-Cys5, Cys7-Cys10, and Cys8-Cys9, in which the numbers cited after the half-cystine residues are their relative positions from the N terminus. Here we describe a method for the isolation of disulfide-bonded peptides from tryptic digests of bovine nasal cartilage monomer. Sequence analysis of these peptides has allowed us to confirm the pairings previously determined for the G1 domain and to assign a disulfide pattern for the G2 domain of Cys11-Cys14, Cys12-Cys13, Cys15-Cys18, and Cys16-Cys17, in which the Cys15-Cys18 pairing was deduced indirectly. Similarly, for the G3 domain, a pattern of Cys19-Cys20, Cys21-Cys24, Cys22-Cys23, Cys25-Cys27, and Cys26-Cys28 was assigned, in which the Cys22-Cys23 pair was deduced indirectly. The G2 domain therefore contains disulfide bonding which is characteristic of the tandem repeat structures found in the G1 domain and link protein, and the G3 domain contains the three disulfide linkages previously assigned to the family of C-type animal lectins. The method described here, which combines anion-exchange, cation-exchange, and reversed-phase chromatography, should have broad application to the isolation of disulfide-bonded peptides from other heavily glycosylated proteins and proteoglycans.     

Evidence for difference in the roles of two cysteine residues involved in disulfide bond formation in the folding of human lysozyme

Human lysozyme is made up of 130 amino acid residues and has four disulfide bonds at Cys6-Cys128, Cys30-Cys116, Cys65-Cys81, and Cys77-Cys95. Our previous results using the Saccharomyces cerevisiae secretion system indicate that the individual disulfide bonds of human lysozyme have different functions in the correct in vivo folding and enzymatic activity of the protein (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967). In this paper, we report the results of experiments that were focused on the roles of Cys65 and Cys81 in the folding of human lysozyme protein in yeast. A mutant protein (C81A), in which Cys81 was replaced with Ala, had almost the same enzymatic activity and conformation as those of the native enzyme. On the other hand, another mutant (C65A), in which Cys65 was replaced with Ala, was not found to fold correctly. These results indicate that Cys81 is not a requisite for both correct folding and activity, whereas Cys65 is indispensable. The mutant protein C81A is seen to contain a new, non-native disulfide bond at Cys65-Cys77. The possible occurrence of disulfide bond interchange during our mapping experiments cannot be ruled out by the experimental techniques presently available, but characterization of other mutant proteins and computer analysis suggest that the intramolecular exchange of disulfide bonds is present in the folding pathway of human lysozyme in vivo.     

Structural characterization of a rhamnose-binding glycoprotein (lectin) from Spanish mackerel (Scomberomorous niphonius) eggs

A rhamnose-binding glycoprotein (lectin), named SML, was isolated from the eggs of Spanish mackerel (Scomberomorous niphonius) by affinity and ion-exchange chromatographies. SML was composed of a non-covalently linked homodimer. The SML subunit was composed of 201 amino acid residues with two tandemly repeated domains, and contained 8 half-Cys residues in each domain, which is highly homologous to the N-terminal lectin domain of calcium-independent alpha-latrotoxin receptor in mammalian brains. Each domain has the same disulfide bonding pattern; Cys10-Cys40, Cys20-Cys99, Cys54-Cys86 and Cys67-Cys73 were located in the N-terminal domain, and Cys108-Cys138, Cys117-Cys195, Cys152-Cys182 and Cys163-Cys169 were in the C-terminal domain. SML was N-glycosylated at Asn168 in the C-terminal domain. The structure of the sugar chain was determined to be NeuAc-Galbeta1-4GlcNAcbeta1-2Manalpha1-6-(NeuAc-Galbeta1-4GlcNAcbeta1-2Manalpha1-3)Manbeta1-4GlcNAcbeta1-4GlcNAc-Asn.     

Two-State Folding of Lysozyme Versus Multiple-State Folding of α-Lactalbumin Illustrated by the Technique of Disulfide Scrambling

The folding of lysozyme and of alpha-lactalbumin exhibits vastly different kinetics and pathways. Existing evidence indicates that folding intermediates of alphaLA form a well-populated equilibrium molten globule state that is absent in the case of hen lysozyme. We demonstrate here such divergent folding mechanisms of lysozyme and alphaLA using the technique of disulfide scrambling. Two extensively unfolded homologous isomers (beads-form) of lysozyme (Cys6-Cys30, Cys64-Cys76, Cys80-Cys94, Cys115-Cys127) and alphaLA (Cys6-Cys28, Cys61-Cys73, Cys77-Cys91, Cys111-Cys120) were allowed to refold in parallel to form the native protein. Folding kinetics was measured by the recovery of the native structure. Folding intermediates, which illustrate the folding pathway, were trapped by quenching disulfide shuffling and were analyzed by reversed-phase high-pressure liquid chromatography. The results revealed that under identical folding conditions, the folding rate of lysozyme is about 30-fold faster than that of alphaLA. Folding intermediates of lysozyme are far less heterogeneous and sparsely populated than those of alphaLA. Numerous predominant on-pathway and off-pathway intermediates observed along the folding pathway of alphaLA are conspicuously absent in the case of lysozyme. The difference is most striking under fast folding conditions performed in the presence of protein disulfide isomerase. Under these conditions, folding of lysozyme undergoes a near two-state mechanism without accumulation of stable folding intermediates.     

Determination of the disulfide bond arrangement of Newcastle disease virus hemagglutinin neuraminidase. Correlation with a beta-sheet propeller structural fold predicted for paramyxoviridae attachment proteins

Disulfide bonds stabilize the structure and functions of the hemagglutinin neuraminidase attachment glycoprotein (HN) of Newcastle disease virus. Until this study, the disulfide linkages of this HN and structurally similar attachment proteins of other members of the paramyxoviridae family were undefined. To define these linkages, disulfide-linked peptides were produced by peptic digestion of purified HN ectodomains of the Queensland strain of Newcastle disease virus, isolated by reverse phase high performance liquid chromatography, and analyzed by mass spectrometry. Analysis of peptides containing a single disulfide bond revealed Cys(531)-Cys(542) and Cys(172)-Cys(196) linkages and that HN ectodomains dimerize via Cys(123). Another peptide, with a chain containing Cys(186) linked to a chain containing Cys(238), Cys(247), and Cys(251), was cleaved at Met(249) with cyanogen bromide. Subsequent tandem mass spectrometry established Cys(186)-Cys(247) and Cys(238)-Cys(251) linkages. A glycopeptide with a chain containing Cys(344) linked to a chain containing Cys(455), Cys(461), and Cys(465) was treated sequentially with peptide-N-glycosidase F and trypsin. Further treatment of this peptide by one round of manual Edman degradation or tandem mass spectrometry established Cys(344)-Cys(461) and Cys(455)-Cys(465) linkages. These data, establishing the disulfide linkages of all thirteen cysteines of this protein, are consistent with published predictions that the paramyxoviridae HN forms a beta-propeller structural fold.     

Pathway of oxidative folding of bovine alpha-interferon: predominance of native disulfide-bonded folding intermediates

Bovine alpha-interferon (BoINF-alpha) is a single polypeptide protein containing 166 amino acids, two disulfide bonds (Cys1-Cys99 and Cys29-Cys138), and five stretches of alpha-helical structure. The pathway of oxidative folding of BoINF-alpha has been investigated here. Of the eight possible one- and two-disulfide isomers, only two nativelike one-disulfide isomers, BoINF-alpha (Cys1-Cys99) and BoINF-alpha (Cys29-Cys138), predominate as intermediates along the folding pathway. More strikingly, alpha-helical structures formed almost quantitatively before any detectable formation of a disulfide bond. This is demonstrated by the observation that fully reduced BoINF-alpha (starting material of oxidative folding) and reduced carboxymethylated BoINF-alpha both exhibit alpha-helical structure content indistinguishable form that of native BoINF-alpha. The folding mechanism of BoINF-alpha appears to be compatible with the framework model, in which secondary structures fold first, followed by docking (compaction) of preformed secondary structural elements yielding the native structure.     

Oxidative modification of aldose reductase induced by copper ion. Definition of the metal-protein interaction mechanism

Aldose reductase (ALR2) is susceptible to oxidative inactivation by copper ion. The mechanism underlying the reversible modification of ALR2 was studied by mass spectrometry, circular dichroism, and molecular modeling approaches on the enzyme purified from bovine lens and on wild type and mutant recombinant forms of the human placental and rat lens ALR2. Two equivalents of copper ion were required to inactivate ALR2: one remained weakly bound to the oxidized protein whereas the other was strongly retained by the inactive enzyme. Cys(303) appeared to be the essential residue for enzyme inactivation, because the human C303S mutant was the only enzyme form tested that was not inactivated by copper treatment. The final products of human and bovine ALR2 oxidation contained the intramolecular disulfide bond Cys(298)-Cys(303). However, a Cys(80)-Cys(303) disulfide could also be formed. Evidence for an intramolecular rearrangement of the Cys(80)-Cys(303) disulfide to the more stable product Cys(298)-Cys(303) is provided. Molecular modeling of the holoenzyme supports the observed copper sequestration as well as the generation of the Cys(80)-Cys(303) disulfide. However, no evidence of conditions favoring the formation of the Cys(298)-Cys(303) disulfide was observed. Our proposal is that the generation of the Cys(298)-Cys(303) disulfide, either directly or by rearrangement of the Cys(80)-Cys(303) disulfide, may be induced by the release of the cofactor from ALR2 undergoing oxidation. The occurrence of a less interactive site for the cofactor would also provide the rationale for the lack of activity of the disulfide enzyme forms.     

Mass spectrometric analysis of posttranslational modifications of a carrot extracellular glycoprotein

Expression of extracellular dermal glycoprotein (EDGP) is induced by biotic or abiotic stress. The amino acid sequence alignment showed that EDGP shared significant homology with proteins from legumes, tomato, Arabidopsis, wheat, and cotton. These proteins are involved in signal transduction or stress response systems. Most of the Cys residues in these proteins are conserved, suggesting that they share similar tertiary structures. Surface plasmon resonance (SPR) analysis shows that EDGP binds a soybean 4-kDa hormone-like peptide (4-kDa peptide) in vitro and reduction of EDGP decreased significantly the binding activity, implying that posttranslational modifications are important for its function. Therefore, we investigated the posttranslational modifications in EDGP using mass spectrometry. As the result, six disulfide bonds in EDGP were identified: Cys(70)-Cys(158), Cys(84)-Cys(89), Cys(97)-Cys(113), Cys(100)-Cys(108), Cys(201)-Cys(426), and Cys(332)-Cys(378). In addition, the N-terminal glutamine was cyclized into pyroglutamic acid. All four putative glycosylation sites were occupied by N-linked glycans, which have similar masses of m/z 1171. Finally, measuring the mass of the native protein showed that the posttranslational modifications of EDGP (pI 9.5) involved only disulfide bonds, N-terminal modification, and glycosylation.     

Assignment of disulphide bonds in synthetic endothelin-1 isomers by fast atom bombardment mass spectrometry.

Endothelin-1 (ET-1), a 21-residue vasoconstrictor peptide possessing four cysteinyl residues at positions 1, 3, 11 and 15, was synthesized by random oxidation of a tetrahydro-ET-1. On reverse-phase high-performance liquid chromatography, crude product was shown to be a mixture of two disulphide isomers. A method was developed to determine the disulphide structure of the isomers. The method consisted of (a) limited digestion with chymotrypsin, (b) cleavage with cyanogen bromide and (c) manual Edman degradation. Through this procedure, each isomer afforded specific fragments containing a single disulphide bond, which were identified by fast atom bombardment mass spectrometry. Isomer 1, the minor component, afforded a fragment containing Cys 3 and Cys 15, and isomer 2, the major component, afforded fragments containing Cys 3 and Cys 11. Since little disulphide exchange was observed, it could be concluded clearly that the disulphide bond pairs in isomer 1 were Cys 1-Cys 11 and Cys 3-Cys 15, while those in isomer 2 were Cys 1-Cys 15 and Cys 3-Cys 11 (the same as natural ET-1). The procedure was successfully applied to two synthetic analogues, [Gly18]-ET-1 and [Pro16]-ET-1.     

Contribution of disulfide bridging to epitope expression of the dengue type 2 virus envelope glycoprotein

The individual contributions of each of the six conserved disulfide (SS) bonds in the dengue 2 virus envelope (E) glycoprotein (strain 16681) to epitope expression was determined by measuring the reactivities of a panel of well-defined monoclonal antibodies (MAbs) with LLC-MK(2) cells that had been transiently transformed with plasmid vectors expressing E proteins that were mutant in their SS bonds. Three domain I (DI) epitopes (C1, C3, and C4) were affected by elimination of any SS bond and were essentially the only epitopes affected by elimination of the amino-proximal SS1 formed between Cys 3 and Cys 30. The remaining DI epitope (C2) was sensitive to only SS3-bond (Cys 74-Cys 105) and SS6-bond (Cys 302-Cys 333) elimination. Of the four DII epitopes examined, reactivities of three anti-epitope MAbs (A1, A2, and A5) were reduced by elimination of SS2 (Cys 61-Cys 121), SS3, SS4 (Cys 94-Cys 116), SS5 (Cys 185-Cys 285), or SS6. The other DII epitope examined (A3) was sensitive only to SS2- and SS3-bond elimination. The three DIII epitopes tested (B2, B3, and B4) were most sensitive to elimination of SS6. The flavivirus group epitope (A1) was less sensitive to elimination of SS3 and SS6. This result may indicate that the region proximal to the E-protein fusion motif (amino acids 98 to 110) may have important linear components. If this observation can be confirmed, peptide mimics from this region of E protein might be able to interfere with flavivirus replication.     

Assignment of the disulfide bonds of huwentoxin-II by Edman degradation sequencing and stepwise thiol modification.

A novel strategy combining Edman degradation and thiol modification was developed to assign the three disulfides of huwentoxin-II (HWTX-II), an insecticidal peptide purified from the venom of the spider Selenocosmia huwena. Phenylthiohydantoin (Pth) derivatives of Cys and the elimination product, dehydroalanine (DeltaSer), can be observed in the Cys cycles during Edman degradation of native HWTX-II. The appearance of two products indicates that the disulfides of HWTX-II were split and that the free thiol group of the second half cystine has been generated. Information about the nature of the disulfide bridges of HWTX-II could be obtained from the sequencing signal if the nascent thiols were modified stepwise by 4-vinylpyridine. Using this method the disulfide bridges of HWTX-II were assigned as Cys4-Cys18, Cys8-Cys29 and Cys23-Cys34, which is different from that seen in HWTX-I, a neurotoxic peptide from the same spider. Using this strategy, one can assign the disulfide bonds of small proteins by sequencing and modification n - 1 times, where n is the number of disulfide bonds in the protein. The above assignment of the disulfide bonds of HWTX-II was confirmed by MALDI-TOF MS of tryptic fragments of HWTX-II. Some disulfide interchanging during proteolysis was observed by monitoring the kinetics of proteolysis of HWTX-II by MALDI-TOF MS.     

Localization of carbohydrate attachment sites and disulfide bridges in limulus alpha 2-macroglobulin. Evidence for two forms differing primarily in their bait region sequences

The primary structure determination of the dimeric invertebrate alpha(2)-macroglobulin (alpha(2)M) from Limulus polyphemus has been completed by determining its sites of glycosylation and disulfide bridge pattern. Of seven potential glycosylation sites for N-linked glycosylation, six (Asn(275), Asn(307), Asn(866), Asn(896), Asn(1089), and Asn(1145)) carry common glucosamine-based carbohydrates groups, whereas one (Asn(80)) carries a carbohydrate chain containing both glucosamine and galactosamine. Nine disulfide bridges, which are homologues with bridges in human alpha(2)M, have been identified (Cys(228)-Cys(269), Cys(456)-Cys(580), Cys(612)-Cys(799), Cys(657)-Cys(707), Cys(849)-Cys(876), Cys(874)-Cys(910), Cys(946)-Cys(1328), Cys(1104)-Cys(1155), and Cys(1362)-Cys(1475)). In addition to these bridges, Limulus alpha(2)M contains three unique bridges that connect Cys(361) and Cys(382), Cys(1370) and Cys(1374), respectively, and Cys(719) in one subunit with the same residue in the other subunit of the dimer. The latter bridge forms the only interchain disulfide bridge in Limulus alpha(2)M. The location of this bridge within the bait region is discussed and compared with other alpha-macroglobulins. Several peptides identified in the course of determining the disulfide bridge pattern provided evidence for the existence of two forms of Limulus alpha(2)M. The two forms have a high degree of sequence identity, but they differ extensively in large parts of their bait regions suggesting that they have different inhibitory spectra. The two forms (Limulus alpha(2)M-1 and -2) are most likely present in an approximately 2:1 ratio in the hemolymph of each animal, and they can be partially separated on a Mono Q column at pH 7.4 by applying a shallow gradient of NaCl.     

Two conserved cysteine triads in human Ero1alpha cooperate for efficient disulfide bond formation in the endoplasmic reticulum

Human Ero1alpha is an endoplasmic reticulum (ER)-resident protein responsible for protein disulfide isomerase (PDI) oxidation. To clarify the molecular mechanisms underlying its function, we generated a panel of cysteine replacement mutants and analyzed their capability of: 1) complementing a temperature-sensitive yeast Ero1 mutant, 2) favoring oxidative folding in mammalian cells, 3) forming mixed disulfides with PDI and ERp44, and 4) adopting characteristic redox-dependent conformations. Our results reveal that two essential cysteine triads (Cys85-Cys94-Cys99 and Cys391-Cys394-Cys397) cooperate in electron transfer, with Cys94 likely forming mixed disulfides with PDI. Dominant negative phenotypes arise when critical residues within the triads are mutated (Cys394, Cys397, and to a lesser extent Cys99). Replacing the first cysteine in either triad (Cys85 or Cys391) generates mutants with weaker activity. In addition, mutating either Cys85 or Cys391, but not Cys397, reverts the dominant negative phenotype of the C394A mutant. These findings suggest that interactions between the two triads, dependent on Cys85 and Cys391, are important for Ero1alpha function, possibly stabilizing a platform for efficient PDI oxidation.     

The N-terminal disulfide linkages of human insulin-like growth factor-binding protein-6 (hIGFBP-6) and hIGFBP-1 are different as determined by mass spectrometry.

The actions of insulin-like growth factors (IGFs) are modulated by a family of six high affinity binding proteins (IGFBPs 1-6). IGFBP-6 differs from other IGFBPs in having the highest affinity for IGF-II and in binding IGF-I with 20-100-fold lower affinity. IGFBPs 1-5 contain 18 conserved cysteines, but human IGFBP-6 lacks 2 of the 12 N-terminal cysteines. The complete disulfide linkages of IGFBP-6 were determined using electrospray ionization mass spectrometry of purified tryptic peptide complexes digested with combinations of chymotrypsin, thermolysin, and endoproteinase Glu-C. Numbering IGFBP-6 cysteines sequentially from the N terminus, the first three disulfide linkages are Cys1-Cys2, Cys3-Cys4, and Cys5-Cys6. The next two linkages are Cys7-Cys9 and Cys8-Cys10, which are analogous to those previously determined for IGFBP-3 and IGFBP-5. The C-terminal linkages are Cys11-Cys12, Cys13-Cys14, and Cys15-Cys16, analogous to those previously determined for IGFBP-2. Disulfide linkages of IGFBP-1 were partially determined and show that Cys1 is not linked to Cys2 and Cys3 is not linked to Cys4. Analogous with IGFBP-3, IGFBP-5, and IGFBP-6, Cys9-Cys11 and Cys10-Cys12 of IGFBP-1 are also disulfide-linked. The N-terminal linkages of IGFBP-6 differ significantly from those of IGFBP-1 (and, by implication, the other IGFBPs), which could contribute to the distinctive IGF binding properties of IGFBP-6.