Echinoderm collagen fibrils grow by surface-nucleation-and-propagation from both centers and ends

Collagen fibrils from sea cucumber (class Holothuroidea) dermis were previously found to grow by coordinated monomer addition at both centers and ends. This analysis of sea urchin (class Echinoidea) collagen fibrils was undertaken to compare the growth characteristics of fibrils from two classes of echinoderms, and to determine whether a single growth model could account for the main features of fibrils from these two taxa. Native collagen fibrils (37-431 micrometer long) from the spine ligaments of the sea urchin Eucidaris tribuloides were studied by scanning transmission electron microscopy and image analysis. The analyses revealed the mass per unit length, and hence the number of molecules in cross-section, along the entire length of each fibril. The fibrils were symmetrically spindle shaped. The maximum mass per unit length occurred in the center of each fibril, where the fibril contains anti-parallel molecules in equal numbers. The two pointed tips of each fibril showed similar linear axial mass distributions, indicating that the two tips retain shape and size similarity throughout growth. The linear axial mass distributions showed that the tips were paraboloidal, similar to those of vertebrate and sea cucumber fibrils. The computed maximum diameters of the fibrils increased linearly with fibril length. The overall shapes of the fibrils showed that they retain geometric similarity throughout growth. Computer modeling showed that the simplest self-assembly mechanism that can account for the features of these fibrils, and of the sea cucumber fibrils that have been described, is one in which the fibril tips produce independent axial growth, while lateral growth takes place through a surface nucleation and propagation mechanism. This mechanism produces coordinated growth in length and diameter as well as geometric similarity, characteristic features of echinoderm collagen fibrils.     

New insight into the shortening of the collagen fibril D-period in human cornea

Collagen fibrils type I display a typical banding pattern, so-called D-periodicity, of about 67 nm, when visualized by atomic force or electron microscopy imaging. Herein we report on a significant shortening of the D-period for human corneal collagen fibrils type I (21 ± 4 nm) upon air-drying, whereas no changes in the D-period were observed for human scleral collagen fibrils type I (64 ± 4 nm) measured under the same experimental conditions as the cornea. It was also found that for the corneal stroma fixed with glutaraldehyde and air-dried, the collagen fibrils show the commonly accepted D-period of 61 ± 8 nm. We used the atomic force microscopy method to image collagen fibrils type I present in the middle layers of human cornea and sclera. The water content in the cornea and sclera samples was varying in the range of .066–.085. Calculations of the D-period using the theoretical model of the fibril and the FFT approach allowed to reveal the possible molecular mechanism of the D-period shortening in the corneal collagen fibrils upon drying. It was found that both the decrease in the shift and the simultaneous reduction in the distance between tropocollagen molecules can be responsible for the experimentally observed effect. We also hypothesize that collagen type V, which co-assembles with collagen type I into heterotypic fibrils in cornea, could be involved in the observed shortening of the corneal D-period.     

Tip-mediated fusion involving unipolar collagen fibrils accounts for rapid fibril elongation, the occurrence of fibrillar branched networks in skin and the paucity of collagen fibril ends in vertebrates.

Collagen fibrils are the principal source of mechanical strength of connective tissues such as tendon, skin, cornea, cartilage and bone. The ability of these tissues to withstand tensile forces is directly attributable to the length and diameter of the fibrils, and to interactions between individual fibrils. Although electron microscopy studies have provided information on fibril diameters, little is known about the length of fibrils in tissue and how fibrils interact with each other. The question of fibril length has been difficult to address because fibril ends are rarely observed in cross-sections of tissue. The paucity of fibril ends, or tips, has led to controversy about how long individual fibrils might be and how the fibrils grow in length and diameter. This review describes recent discoveries that are relevant to these questions. We now know that vertebrate collagen fibrils are synthesised as short (1-3 microm) early fibrils that fuse end-to-end in young tissues to generate very long fibrils. The diameter of the final fibril is determined by the diameter of the collagen early fibrils. During a late stage of tissue assembly fibril tips fuse to fibril shafts to generate branched networks. Of direct relevance to fibril fusion is the fact that collagen fibrils can be unipolar or bipolar, depending on the orientation of collagen molecules in the fibril. Fusion relies on: (1) specific molecular interactions at the carboxyl terminal ends of unipolar collagen fibrils; and (2) the insulator function of small proteoglycans to shield the surfaces of fibrils from inappropriate fusion reactions. The fusion of tips to shafts to produce branched networks of collagen fibrils is an elegant mechanism to increase the mechanical strength of tissues and provides an explanation for the paucity of fibril tips in older tissue.     

Morphology of sheet-like assemblies of pN-collagen, pC-collagen and procollagen studied by scanning transmission electron microscopy mass measurements

At high concentrations, type I pN-collagen, pC-collagen and procollagen (the first 2 generated from procollagen by enzymic cleavage of C-propeptides and N-propeptides, respectively) can all be made to assemble in vitro into thin D-periodic sheets or tapes. Scanning transmission electron microscopy mass measurements show that the pN-collagen sheets and procollagen tapes have a mass per unit area corresponding to that of approximately 6.8 monolayers of close-packed molecules. pN-collagen sheets are extensive and remarkably uniform in mass thickness (fractional S.D. 0.035); procollagen tapes are neither as extensive nor as uniform in thickness. The mean thickness of pC-collagen tapes is less and the variability is greater. In pN-collagen sheets, the overlap: gap mass contrast in a D-period is increased from 5:4 (the ratio in a native collagen fibril) to 6:4, showing that the N-propeptides do not project into the gap but are folded back over the overlap zone. Assuming all N-propeptides to be constrained to the two surfaces of a sheet, their surface density can be found from the mass thickness of the sheet. In a lateral direction (i.e. normal to the axial direction where the spacing is D-periodic), the N-propeptide domains are calculated to be spaced, centre to centre, by 2.23 (+/- 0.1) nm on both surfaces. This value (approx. 1.5 x the triple-helix diameter) implies close-packing laterally with adjacent domains in contact. Sheet formation and the "surface-seeking" behaviour of propeptides can be understood in terms of the dual character of the molecules, evident from solubility data, with propeptides possessing interaction properties very different from those displayed by the rest of the molecule. The form and stability of sheets (and of first-formed fibrils assembling in vivo) could, it is suggested, depend on the partially fluid-like nature of lateral contacts between collagen molecules.     

Collagen type I and type V are present in the same fibril in the avian corneal stroma

The distribution, supramolecular form, and arrangement of collagen types I and V in the chicken embryo corneal stroma were studied using electron microscopy, collagen type-specific monoclonal antibodies, and a preembedding immunogold method. Double-label immunoelectron microscopy with colloidal gold-tagged monoclonal antibodies was used to simultaneously localize collagen type I and type V within the chick corneal stroma. The results definitively demonstrate, for the first time, that both collagens are codistributed within the same fibril. Type I collagen was localized to striated fibrils throughout the corneal stroma homogeneously. Type V collagen could be localized only after pretreatment of the tissue to partially disrupt collagen fibril structure. After such pretreatments the type V collagen was found in regions where fibrils were partially dissociated and not in regions where fibril structure was intact. When pretreated tissues were double labeled with antibodies against types I and V collagen coupled to different size gold particles, the two collagens colocalized in areas where fibril structure was partially disrupted. Antibodies against type IV collagen were used as a control and were nonreactive with fibrils. These results indicate that collagen types I and V are assembled together within single fibrils in the corneal stroma such that the interaction of these collagen types within heterotypic fibrils masks the epitopes on the type V collagen molecule. One consequence of the formation of such heterotypic fibrils may be the regulation of corneal fibril diameter, a condition essential for corneal transparency.     

Extracellular compartments in matrix morphogenesis: collagen fibril, bundle, and lamellar formation by corneal fibroblasts

The regulation of collagen fibril, bundle, and lamella formation by the corneal fibroblasts, as well as the organization of these elements into an orthogonal stroma, was studied by transmission electron microscopy and high voltage electron microscopy. Transmission and high voltage electron microscopy of chick embryo corneas each demonstrated a series of unique extracellular compartments. Collagen fibrillogenesis occurred within small surface recesses. These small recesses usually contained between 5 and 12 collagen fibrils with typically mature diameters and constant intrafibrillar spacing. The lateral fusion of the recesses resulted in larger recesses and consequent formation of prominent cell surface foldings. Within these surface foldings, bundles that contained 50-100 collagen fibrils were formed. The surface foldings continued to fuse and the cell surface retracted, forming large surface-associated compartments in which bundles coalesced to form lamellae. High voltage electron microscopy of 0.5 micron sections cut parallel to the corneal surface revealed that the corneal fibroblasts and their processes had two major axes at approximately right angles to one another. The surface compartments involved in the production of the corneal stroma were aligned along the fibroblast axes and the orthogonality of the cell was in register with that of the extracellular matrix. In this manner, corneal fibroblasts formed collagen fibrils, bundles, and lamellae within a controlled environment and thereby determined the architecture of the corneal stroma by the configuration of the cell and its associated compartments.     

Nanomechanical Mapping of Hydrated Rat Tail Tendon Collagen I Fibrils

Collagen fibrils play an important role in the human body, providing tensile strength to connective tissues. These fibrils are characterized by a banding pattern with a D-period of 67 nm. The proposed origin of the D-period is the internal staggering of tropocollagen molecules within the fibril, leading to gap and overlap regions and a corresponding periodic density fluctuation. Using an atomic force microscope high-resolution modulus maps of collagen fibril segments, up to 80 μm in length, were acquired at indentation speeds around 10⁵ nm/s. The maps revealed a periodic modulation corresponding to the D-period as well as previously undocumented micrometer scale fluctuations. Further analysis revealed a 4/5, gap/overlap, ratio in the measured modulus providing further support for the quarter-staggered model of collagen fibril axial structure. The modulus values obtained at indentation speeds around 10⁵ nm/s are significantly larger than those previously reported. Probing the effect of indentation speed over four decades reveals two distinct logarithmic regimes of the measured modulus and point to the existence of a characteristic molecular relaxation time around 0.1 ms. Furthermore, collagen fibrils exposed to temperatures between 50 and 62°C and cooled back to room temperature show a sharp decrease in modulus and a sharp increase in fibril diameter. This is also associated with a disappearance of the D-period and the appearance of twisted subfibrils with a pitch in the micrometer range. Based on all these data and a similar behavior observed for cross-linked polymer networks below the glass transition temperature, we propose that collagen I fibrils may be in a glassy state while hydrated.     

Two type XII-like collagens localize to the surface of banded collagen fibrils

Two recently identified collagen molecules, termed twelve-like A and twelve-like B (TL-A and TL-B) have properties similar to type XII collagen. These molecules have been localized in human and calf tissues by immunoelectron microscopy. The observations strongly suggest that both molecules are located along the surface of banded collagen fibers. The epitopes recognized by the antibodies are contained in large, nontriple-helical domains at one end of the collagen helix. The epitopes are visualized at a distance from the surface of the banded fibers roughly equal to the length of the nonhelical domains, suggesting that the nonhelical domains extend from the fibril, while the triple-helical domains are likely to bind directly to the fibril surface. Occasionally, both TL-A and TL-B demonstrate periodic distribution along the fibril surface. The period corresponds to the primary interband distance of the banded fibrils. Not all fibrils in a fiber bundle are labeled, nor is the labeling continuous along the length of labeled fibrils. Simultaneous labeling of TL-A and type VI collagen only rarely shows colocalization, suggesting that TL-A and TL-B do not mediate interactions between the type VI collagen beaded filaments and banded collagen fibrils. Also, interfibrillar distances are approximately equivalent in the presence and absence of these type XII-like molecules. While the results do not directly indicate a specific function for these molecules, the localization at the fibril surface suggests that they mediate interactions between the fibrils and other matrix macromolecules or with cells.     

Nanomechanical Mapping of Hydrated Rat Tail Tendon Collagen I Fibrils

Collagen fibrils play an important role in the human body, providing tensile strength to connective tissues. These fibrils are characterized by a banding pattern with a D-period of 67 nm. The proposed origin of the D-period is the internal staggering of tropocollagen molecules within the fibril, leading to gap and overlap regions and a corresponding periodic density fluctuation. Using an atomic force microscope high-resolution modulus maps of collagen fibril segments, up to 80 μm in length, were acquired at indentation speeds around 10⁵ nm/s. The maps revealed a periodic modulation corresponding to the D-period as well as previously undocumented micrometer scale fluctuations. Further analysis revealed a 4/5, gap/overlap, ratio in the measured modulus providing further support for the quarter-staggered model of collagen fibril axial structure. The modulus values obtained at indentation speeds around 10⁵ nm/s are significantly larger than those previously reported. Probing the effect of indentation speed over four decades reveals two distinct logarithmic regimes of the measured modulus and point to the existence of a characteristic molecular relaxation time around 0.1 ms. Furthermore, collagen fibrils exposed to temperatures between 50 and 62°C and cooled back to room temperature show a sharp decrease in modulus and a sharp increase in fibril diameter. This is also associated with a disappearance of the D-period and the appearance of twisted subfibrils with a pitch in the micrometer range. Based on all these data and a similar behavior observed for cross-linked polymer networks below the glass transition temperature, we propose that collagen I fibrils may be in a glassy state while hydrated.     

Identification of collagen fibril fusion during vertebrate tendon morphogenesis. The process relies on unipolar fibrils and is regulated by collagen-proteoglycan interaction

The synthesis of an extracellular matrix containing long (approximately mm in length) collagen fibrils is fundamental to the normal morphogenesis of animal tissues. In this study we have direct evidence that fibroblasts synthesise transient early fibril intermediates (approximately 1 micrometer in length) that interact by tip-to-tip fusion to generate long fibrils seen in older tissues. Examination of early collagen fibrils from tendon showed that two types of early fibrils occur: unipolar fibrils (with carboxyl (C) and amino (N) ends) and bipolar fibrils (with two N-ends). End-to-end fusion requires the C-end of a unipolar fibril. Proteoglycans coated the shafts of the fibrils but not the tips. In the absence of proteoglycans the fibrils aggregated by side-to-side interactions. Therefore, proteoglycans promote tip-to-tip fusion and inhibit side-to-side fusion. This distribution of proteoglycan along the fibril required co-assembly of collagen and proteoglycan prior to fibril assembly. The study showed that collagen fibrillogenesis is a hierarchical process that depends on the unique structure of unipolar fibrils and a novel function of proteoglycans.     

Collagen fibril assembly by corneal fibroblasts in three-dimensional collagen gel cultures: small-diameter heterotypic fibrils are deposited in the absence of keratan sulfate proteoglycan.

Extracellular matrix assembly is a multistep process and the various steps in collagen fibrillogenesis are thought to be influenced by a number of factors, including other noncollagenous matrix molecules. The synthesis and deposition of extracellular matrix by corneal fibroblasts grown within three-dimensional collagen gel cultures were examined to elucidate the factors important in the establishment of tissue-specific matrix architecture. Corneal fibroblasts in collagen gel cultures form layers and deposit small-diameter collagen fibrils (approximately 25 nm) typical of the mature corneal stroma. The matrix synthesized contains type VI collagen in a filamentous network and type I and type V collagen assembled as heterotypic fibrils. The amount of type V collagen synthesized is relatively high and comparable to that seen in the corneal stroma. This matrix is deposited between cell layers in a manner reminiscent of the secondary corneal stroma, but is not deposited as densely or as organized as would be found in situ. No keratan sulfate proteoglycan, a proteoglycan found only in the corneal stroma, was synthesized by the fibroblasts in the collagen gel cultures. The assembly and deposition of small-diameter fibrils with a collagen composition and structure identical to that seen in the corneal stroma in the absence of proteoglycans typical of the secondary corneal stroma imply that although proteoglycan-collagen interactions may function in the establishment of interfibrillar spacing and lamellar organization, collagen-collagen interactions are the major parameter in the regulation of fibril diameter.     

Interpretation of the meridional X-ray diffraction pattern from collagen fibrils in corneal stroma

The low angle X-ray diffraction pattern from corneal stroma can be interpreted as arising from the equivalent of sharp meridional reflections due to the packing of molecules along the collagen fibrils and an equatorial pattern due to the packing of these fibrils within lamellae.Axial electron density profiles for corneal collagen fibrils have been produced by combining intensity data from the meridional pattern with two independent sets of phases. The first set was obtained using an electron microscopical technique, whereas the second set consisted of calculated tendon collagen phases given in the literature. Substantial agreement between the two electron density profiles was found.A quantitative analysis of the difference between the electron density profiles of rat tail tendon and corneal collagen showed that the step between the gap and overlap regions is smaller in cornea than in tendon. This is probably due to the binding of non-collagenous material in the gap region as occurs in bone and other tissue. Two peaks corresponding to regions where electron density is greater in the cornea are situated at the gap/overlap junctions. A third region where the corneal collagen is more electron dense is located near the centre of the gap region. The proximity of these peaks to the positions of hydroxylysine residues along the fibril axis suggests that they may be the major sites at which sugars are bound to corneal collagen.     

Mechanical response of individual collagen fibrils in loaded tendon as measured by atomic force microscopy

A precise analysis of the mechanical response of collagen fibrils in tendon tissue is critical to understanding the ultrastructural mechanisms that underlie collagen fibril interactions (load transfer), and ultimately tendon structure–function. This study reports a novel experimental approach combining macroscopic mechanical loading of tendon with a morphometric ultrascale assessment of longitudinal and cross-sectional collagen fibril deformations. An atomic force microscope was used to characterize diameters and periodic banding (D-period) of individual type-I collagen fibrils within murine Achilles tendons that were loaded to 0%, 5%, or 10% macroscopic nominal strain, respectively. D-period banding of the collagen fibrils increased with increasing tendon strain (2.1% increase at 10% applied tendon strain, p < 0.05), while fibril diameter decreased (8% reduction, p < 0.05). No statistically significant differences between 0% and 5% applied strain were observed, indicating that the onset of fibril (D-period) straining lagged macroscopically applied tendon strains by at least 5%. This confirms previous reports of delayed onset of collagen fibril stretching and the role of collagen fibril kinematics in supporting physiological tendon loads. Fibril strains within the tissue were relatively tightly distributed in unloaded and highly strained tendons, but were more broadly distributed at 5% applied strain, indicating progressive recruitment of collagen fibrils. Using these techniques we also confirmed that collagen fibrils thin appreciably at higher levels of macroscopic tendon strain. Finally, in contrast to prevalent tendon structure–function concepts data revealed that loading of the collagen network is fairly homogenous, with no apparent predisposition for loading of collagen fibrils according to their diameter.     

Neutron and X-ray scattering by ox corneal stroma differentially loaded with bound anions

Ox corneas at near physiological hydration were subjected to two variables: the amount of chloride ions bound to them and exposure of various mixtures of H(2)O/D(2)O as solvent. The preparations were then exposed to a neutron beam and the contrast match points, at which the collagen fibrils of the corneal stroma most nearly matched the scattering density of the various H(2)O/D(2)O mixtures, were measured. In both cases of high and low bound chloride, the contrast match points of the collagen fibril were equal, indicating that there were no significant changes in the water of electrostriction at the fibril surface when chloride ions bind to the stroma. The data suggest that the ligands which bind anions to corneal stroma are not located at the collagen fibril surface. When the chloride binding ligands were extracted from the corneal stroma there were significant changes in the structure of the fibrils. We suggest that the chloride binding ligands may be located within the collagen fibril.     

Multiple assembly pathways underlie amyloid-beta fibril polymorphisms

The amyloid beta-protein transiently forms low and high molecular mass oligomers and protofibrils in vitro, and after longer incubation times assembles into polymorphic mature fibrils. The precursor-to-product relationship of these species remains to be understood. Protofibrils are up to approximately 600 nm in length and have mass-per-lengths of 19(+/-2) kDa/nm measured by scanning transmission electron microscopy. Two predominant mature fibril types, several microns in length and with mass-per-lengths of 18(+/-3) and 27(+/-3) kDa/nm, are identified after longer incubation times. The difference of approximately 9 kDa/nm between the two fibril types indicates a bona fide elementary protofilament subunit of this mass-per-length. Fibrils in the 18(+/-3) kDa/nm group often exhibited distinct coiling with axial cross-over spacings of approximately 25 nm. Although strikingly different in morphology, the mass-per-length (MPL) of these coiled fibrils is equivalent to that measured for protofibrils. They could therefore arise from a conformational change in the protofibril concurrent with coiling and rapid elongation. Alternatively, we cannot rule out an assembly pathway not directly related to protofibrils. In contrast, the 27(+/-3) kDa/nm fibrils correspond to a MPL of approximately 1.5 x the protofibril and thus can neither arise from a simple conformational transition nor from lateral association of 19 kDa/nm protofibril precursors. Twisted ribbons with axial periodicities ranging from approximately 80 nm to 130 nm were prominent in the 27(+/-3) kDa/nm group as well as more tightly coiled fibrils. Individual fibril ribbons had elongation rates of 20(+/-12) nm/min when imaged by time-lapse atomic force microscopy. Protofibrils exhibited growth rates approximately 15 x slower at 1.3(+/-0.5) nm/min. The data support a model where concurrent multiple assembly pathways give rise to the various polymorphic fibril types.     

Hierarchical assembly and the onset of banding in fibrous long spacing collagen revealed by atomic force microscopy.

The mechanism of formation of fibrillar collagen with a banding periodicity much greater than the 67 nm of native collagen, i.e. the so-called fibrous long spacing (FLS) collagen, has been speculated upon, but has not been previously studied experimentally from a detailed structural perspective. In vitro, such fibrils, with banding periodicity of approximately 270 nm, may be produced by dialysis of an acidic solution of type I collagen and alpha(1)-acid glycoprotein against deionized water. FLS collagen assembly was investigated by visualization of assembly intermediates that were formed during the course of dialysis using atomic force microscopy. Below pH 4, thin, curly nonbanded fibrils were formed. When the dialysis solution reached approximately pH 4, thin, filamentous structures that showed protrusions spaced at approximately 270 nm were seen. As the pH increased, these protofibrils appeared to associate loosely into larger fibrils with clear approximately 270 nm banding which increased in diameter and compactness, such that by approximately pH 4.6, mature FLS collagen fibrils begin to be observed with increasing frequency. These results suggest that there are aspects of a stepwise process in the formation of FLS collagen, and that the banding pattern arises quite early and very specifically in this process. It is proposed that typical 4D-period staggered microfibril subunits assemble laterally with minimal stagger between adjacent fibrils. alpha(1)-Acid glycoprotein presumably promotes this otherwise abnormal lateral assembly over native-type self-assembly. Cocoon-like fibrils, which are hundreds of nanometers in diameter and 10-20 microm in length, were found to coexist with mature FLS fibrils.     

Mass distribution and spatial organization of the linear bacterial motor of Spiroplasma citri R8A2

In the simple, helical, wall-less bacterial genus Spiroplasma, chemotaxis and motility are effected by a linear, contractile motor arranged as a flat cytoskeletal ribbon attached to the inner side of the membrane along the shortest helical line. With scanning transmission electron microscopy and diffraction analysis, we determined the hierarchical and spatial organization of the cytoskeleton of Spiroplasma citri R8A2. The structural unit appears to be a fibril, approximately 5 nm wide, composed of dimers of a 59-kDa protein; each ribbon is assembled from seven fibril pairs. The functional unit of the intact ribbon is a pair of aligned fibrils, along which pairs of dimers form tetrameric ring-like repeats. On average, isolated and purified ribbons contain 14 fibrils or seven well-aligned fibril pairs, which are the same structures observed in the intact cell. Scanning transmission electron microscopy mass analysis and sodium dodecyl sulfate-polyacrylamide gel electrophoresis of purified cytoskeletons indicate that the 59-kDa protein is the only constituent of the ribbons.     

THE ULTRASTRUCTURE OF FLAGELLAR FIBRILS

The tips of rat sperm tails were slightly frayed by mechanical agitation, thus exposing the fibrils, which were then studied by electron microscopy after negative staining. Only the fibrils survived this treatment. Each fibril proved to be a cylinder with a hollow core. The walls of the cylinders were made up of 10 longitudinally oriented filaments. The filaments had a markedly beaded appearance, with a repeating period of 88 A. The filament thickness (bead width) was approximately 35 to 40 A. Beads of neighboring filaments were in register with each other so that cross-linking bound the filaments together to complete the wall structure of each fibril. The center-to-center spacing from one filament to the next was 55 to 60 A. The periodicity and the diameters of the filaments make it unlikely that the filaments are related to either actin or myosin. From the way the fibrils kinked, it can be inferred that they possessed considerable mechanical strength. It is consistent with present knowledge that fibrils of the mitotic apparatus may have the same basic structure as the flagellar fibrils. Under some circumstances, pairs of fibrils separated from one another along their length, except at their extreme tips. It was apparent that there was special bridging material to be found there. In other preparations, however, the paired fibrils remained together, indicating a powerful coupling mechanism.     

Shaping and moving a spiroplasma

The Mollicutes (Spiroplasma, Mycoplasma and Acholeplasma) are the most minimal cells known to exist, being the smallest and simplest free-living and self-replicating forms of life. Phylogenetically, the Mollicutes are related to gram-positive bacteria and have evolved, by regressive evolution and genome reduction, from Clostridia. The smallest genome in this group (Mycoplasma genitalium - 5.77 x 10(5) bp) is only twice that of a large virus (e.g., Entomopox viruses). The largest Mollicute genome (Spiroplasma LB12 - 2.2 x 10(6) bp) is only about half that of, e.g., Escherichia coli. Structurally, the Mollicutes lack cell walls and flagella, but have internal cytoskeletons and are motile and chemotactic. Only a cholesterol-containing unit membrane envelops the cells. No analogs to the bacterial chemotactic and motility (che, mot, fla) genes, genes for a two-component signal transduction system, genes associated with gliding, or genomic homologs for the eukaryotic cytoskeleton and motor proteins were found in the Mollicutes. The Spiroplasmas are unique amongst the Mollicutes in having a well-defined basic helical cell geometry. In this respect, the Spiroplasma cell can, essentially, be viewed as a helical dynamic membranal tube (diameter approximately 0.2 microm; equivalent to that of one eukaryotic flagellar axoneme or to a bacterial flagellar bundle). A flat cytoskeletal ribbon of parallel fibrils is attached to the inside of the cellular tube. Both tube and cytoskeleton are mutually coiled into a dynamic helix driven by differential length changes of the fibrils, which function as linear motors. The cytoskeletal ribbon follows the shortest (inner) helical line on the inner surface of the cellular tube. Being helical allows for further analytical reduction and consequent structural quantification of Spiroplasma. Of particular importance is the ability to correlate light and electron microscopy data and to calculate the fibril lengths (and corresponding molecular dimensions) in the helical and nonhelical dynamic states. The structural unit of the contractile cytoskeleton is a approximately 50-Angstrom-wide filament comprised of pairs of the 59-kD fib gene product. The monomers are arranged in pairs with opposite polarities allowing for a approximately 100-Angstrom-long axial repeat. The functional unit of the contractile cytoskeletal ribbon is a fibril comprised of an aligned pair of filaments. Neighboring repeats form a tetrameric ring with a lateral repeat of approximately 100 A. The axial length of the rings may shorten by approximately 40%, driving the changes in the fibril lengths and, consequently, helical dynamics. Local length changes result in helical symmetry breaking and nonreciprocating cell movements allowing for net directional displacement. Flexing allows for changes in swimming direction.     

Type V collagen: molecular structure and fibrillar organization of the chicken alpha 1(V) NH2-terminal domain, a putative regulator of corneal fibrillogenesis

Previous work from our laboratories has demonstrated that: (a) the striated collagen fibrils of the corneal stroma are heterotypic structures composed of type V collagen molecules coassembled along with those of type I collagen, (b) the high content of type V collagen within the corneal collagen fibrils is one factor responsible for the small, uniform fibrillar diameter (25 nm) characteristic of this tissue, (c) the completely processed form of type V collagen found within tissues retains a large noncollagenous region, termed the NH2- terminal domain, at the amino end of its alpha 1 chain, and (d) the NH2- terminal domain may contain at least some of the information for the observed regulation of fibril diameters. In the present investigation we have employed polyclonal antibodies against the retained NH2- terminal domain of the alpha 1(V) chain for immunohistochemical studies of embryonic avian corneas and for immunoscreening a chicken cDNA library. When combined with cDNA sequencing and molecular rotary shadowing, these approaches provide information on the molecular structure of the retained NH2-terminal domain as well as how this domain might function in the regulation of fibrillar structure. In immunofluorescence and immunoelectron microscopy analyses, the antibodies against the NH2-terminal domain react with type V molecules present within mature heterotypic fibrils of the corneal stroma. Thus, epitopes within at least a portion of this domain are exposed on the fibril surface. This is in marked contrast to mAbs which we have previously characterized as being directed against epitopes located in the major triple helical domain of the type V molecule. The helical epitopes recognized by these antibodies are antigenically masked on type V molecules that have been assembled into fibrils. Sequencing of the isolated cDNA clones has provided the conceptual amino acid sequence of the entire amino end of the alpha 1(V) procollagen chain. The sequence shows the location of what appear to be potential propeptidase cleavage sites. One of these, if preferentially used during processing of the type V procollagen molecule, can provide an explanation for the retention of the NH2-terminal domain in the completely processed molecule. The sequencing data also suggest that the NH2-terminal domain consists of several regions, providing a structure which fits well with that of the completely processed type V molecule as visualized by rotary shadowing.