The conformation of double-stranded DNA inside bacteriophages depends on capsid size and shape

The packaging of double-stranded DNA into bacteriophages leads to the arrangement of the genetic material into highly-packed and ordered structures. Although modern experimental techniques reveal the most probable location of DNA inside viral capsids, the individual conformations of DNA are yet to be determined. In the current study we present the results of molecular dynamics simulations of the DNA packaging into several bacteriophages performed within the framework of a coarse-grained model. The final DNA conformations depend on the size and shape of the capsid, as well as the size of the protein portal, if any. In particular, isometric capsids with small or absent portals tend to form concentric spools, whereas the presence of a large portal favors coaxial spooling; slightly and highly elongated capsids result in folded and twisted toroidal conformations, respectively. The results of the simulations also suggest that the predominant factor in defining the global DNA arrangement inside bacteriophages is the minimization of the bending stress upon packaging.     

Mode of DNA packing within bacteriophage heads

Electron micrographs of five different DNA bacteriophages, as prepared by drying in thin films of negative stain, frequently show their heads to be disrupted and flattened. In such cases DNA strands, no larger than 2.5 nm in diameter, become visible, either contained within partially ruptured capsids or completely ejected from severely ruptured ones. Seen in either aspect, the strands appear with circular outline; in some cases a set of concentric circles (or a tightly wound spiral) is evident.Two alternative models of DNA packing within phage heads are proposed. Both are consistent with the electron microscopic observations and, as applied specifically to T4 phage heads, they are also consistent with available data from birefringence studies. One model proposes that the DNA, in simple double-helix form, is wound into a ball. The other suggests that the DNA is wound like a spool, with a greater number of turns in the central region than at the two ends and with the spool axis perpendicular to the axis of the phage particle. The available evidence does not permit a choice to be made between the two models.     

Visualization of bacteriophage T3 capsids with DNA incompletely packaged in vivo

The tightly packaged double-stranded DNA (dsDNA) genome in the mature particles of many tailed bacteriophages has been shown to form multiple concentric rings when reconstructed from cryo-electron micrographs. However, recent single-particle DNA packaging force measurements have suggested that incompletely packaged DNA (ipDNA) is less ordered when it is shorter than ∼ 25% of the full genome length. The study presented here initially achieves both the isolation and the ipDNA length-based fractionation of ipDNA-containing T3 phage capsids (ipDNA-capsids) produced by DNA packaging in vivo; some ipDNA has quantized lengths, as judged by high-resolution gel electrophoresis of expelled DNA. This is the first isolation of such particles among the tailed dsDNA bacteriophages. The ipDNA-capsids are a minor component (containing ∼ 10^− 4 of packaged DNA in all particles) and are initially detected by nondenaturing gel electrophoresis after partial purification by buoyant density centrifugation. The primary contaminants are aggregates of phage particles and empty capsids. This study then investigates ipDNA conformations by the first cryo-electron microscopy of ipDNA-capsids produced in vivo. The 3-D structures of DNA-free capsids, ipDNA-capsids with various lengths of ipDNA, and mature bacteriophage are reconstructed, which reveals the typical T = 7l icosahedral shell of many tailed dsDNA bacteriophages. Though the icosahedral shell structures of these capsids are indistinguishable at the current resolution for the protein shell (∼ 15 Å), the conformations of the DNA inside the shell are drastically different. T3 ipDNA-capsids with 10.6 kb or shorter dsDNA (< 28% of total genome) have an ipDNA conformation indistinguishable from random. However, T3 ipDNA-capsids with 22 kb DNA (58% of total genome) form a single DNA ring next to the inner surface of the capsid shell. In contrast, dsDNA fully packaged (38.2 kb) in mature T3 phage particles forms multiple concentric rings such as those seen in other tailed dsDNA bacteriophages. The distance between the icosahedral shell and the outermost DNA ring decreases in the mature, fully packaged phage structure. These results suggest that, in the early stage of DNA packaging, the dsDNA genome is randomly distributed inside the capsid, not preferentially packaged against the inner surface of the capsid shell, and that the multiple concentric dsDNA rings seen later are the results of pressure-driven close-packing.     

Role of DNA-DNA interactions on the structure and thermodynamics of bacteriophages Lambda and P4

Electrostatic interactions play an important role in both packaging of DNA inside bacteriophages and its release into bacterial cells. While at physiological conditions DNA strands repel each other, the presence of polyvalent cations such as spermine and spermidine in solutions leads to the formation of DNA condensates. In this study, we discuss packaging of DNA into bacteriophages P4 and Lambda under repulsive and attractive conditions using a coarse-grained model of DNA and capsids. Packaging under repulsive conditions leads to the appearance of the coaxial spooling conformations; DNA occupies all available space inside the capsid. Under the attractive potential both packed systems reveal toroidal conformations, leaving the central part of the capsids empty. We also present a detailed thermodynamic analysis of packaging and show that the forces required to pack the genomes in the presence of polyamines are significantly lower than those observed under repulsive conditions. The analysis reveals that in both the repulsive and attractive regimes the entropic penalty of DNA confinement has a significant non-negligible contribution into the total energy of packaging. Additionally we report the results of simulations of DNA condensation inside partially packed Lambda. We found that at low densities DNA behaves as free unconfined polymer and condenses into the toroidal structures; at higher densities rearrangement of the genome into toroids becomes hindered, and condensation results in the formation of non-equilibrium structures. In all cases packaging in a specific conformation occurs as a result of interplay between bending stresses experienced by the confined polymer and interactions between the strands.     

Bacteriophage P22 in vitro DNA packaging monitored by agarose gel electrophoresis: rate of DNA entry into capsids.

Bacteriophage P22, like other double-stranded DNA bacteriophages, packages DNA in a preassembled, DNA-free procapsid. The P22 procapsid and P22 bacteriophage have been electrophoretically characterized; the procapsid has a negative average electrical surface charge density (sigma) higher in magnitude than the negative sigma of the mature bacteriophage. Dextrans, sucrose, and maltose were shown to have a dramatic stimulatory effect on the in vitro packaging of DNA by the P22 procapsid. However, sedoheptulose, smaller sugars, and smaller polyols did not stimulate in vitro P22 DNA packaging. These and other data suggest that an osmotic pressure difference across some particle, probably a capsid, stimulates P22 DNA packaging. After in vitro packaging was optimized by including dextran 40 in extracts, the entry kinetics of DNA into P22 capsids were measured. Packaged DNA was detected by: (i) DNA-specific staining of intact capsids after fractionation by agarose gel electrophoresis and (ii) agarose gel electrophoresis of DNase-resistant DNA after release of DNase-resistant DNA from capsids. It was found that the first DNA was packaged by 1.5 min after the start of incubation. The data further suggest that either P22 capsids with DNA partially packaged in vitro are too unstable to be detected by the above procedures or entry of DNA into the capsid occurs in less than 0.25 min.     

The UL6 gene product forms the portal for entry of DNA into the herpes simplex virus capsid

During replication of herpes simplex virus type 1 (HSV-1), viral DNA is synthesized in the infected cell nucleus, where DNA-free capsids are also assembled. Genome-length DNA molecules are then cut out of a larger, multigenome concatemer and packaged into capsids. Here we report the results of experiments carried out to test the idea that the HSV-1 UL6 gene product (pUL6) forms the portal through which viral DNA passes as it enters the capsid. Since DNA must enter at a unique site, immunoelectron microscopy experiments were undertaken to determine the location of pUL6. After specific immunogold staining of HSV-1 B capsids, pUL6 was found, by its attached gold label, at one of the 12 capsid vertices. Label was not observed at multiple vertices, at nonvertex sites, or in capsids lacking pUL6. In immunoblot experiments, the pUL6 copy number in purified B capsids was found to be 14.8 +/- 2.6. Biochemical experiments to isolate pUL6 were carried out, beginning with insect cells infected with a recombinant baculovirus expressing the UL6 gene. After purification, pUL6 was found in the form of rings, which were observed in electron micrographs to have outside and inside diameters of 16.4 +/- 1.1 and 5.0 +/- 0.7 nm, respectively, and a height of 19.5 +/- 1.9 nm. The particle weights of individual rings as determined by scanning transmission electron microscopy showed a majority population with a mass corresponding to an oligomeric state of 12. The results are interpreted to support the view that pUL6 forms the DNA entry portal, since it exists at a unique site in the capsid and forms a channel through which DNA can pass. The HSV-1 portal is the first identified in a virus infecting a eukaryote. In its dimensions and oligomeric state, the pUL6 portal resembles the connector or portal complexes employed for DNA encapsidation in double-stranded DNA bacteriophages such as phi29, T4, and P22. This similarity supports the proposed evolutionary relationship between herpesviruses and double-stranded DNA phages and suggests the basic mechanism of DNA packaging is conserved.     

Encapsidation and transfer of phage DNA into host cells: from in vivo to single particles studies

A remarkable property of bacteriophages is their capacity to encapsidate large amounts of DNA during morphogenesis and to maintain their genome in the capsid in a very stable form even under extreme conditions. Even as remarkable is the efficiency with which their genome is ejected from the phage particle and transferred into the host bacteria. Biophysical techniques have led to significant progresses in characterizing these mechanisms. The molecular motor of encapsidation of several phages as well as the organization of viral capsids have been described at atomic resolution. Cryo-electron microscopy and fluorescence microscopy have permitted to describe DNA ejection at the level of single phage particles. Theoretical models of encapsidation and ejection have been proposed that can be confronted to experimental data. This review will present the state of the art on the recent advances brought by biophysics in this field. Reference will be given to the work performed on double-stranded DNA phages and on one of its representative, phage T5, our working model.     

Direct visualization of the putative portal in the Kaposi's sarcoma-associated herpesvirus capsid by cryoelectron tomography

Genetic and biochemical studies have suggested the existence of a bacteriophage-like, DNA-packaging/ejecting portal complex in herpesviruses capsids, but its arrangement remained unknown. Here, we report the first visualization of a unique vertex in the Kaposi's sarcoma-associated herpesvirus (KSHV) capsid by cryoelectron tomography, thus providing direct structural evidence for the existence of a portal complex in a gammaherpesvirus. This putative KSHV portal is an internally localized, umbilicated structure and lacks all of the external machineries characteristic of portals in DNA bacteriophages.     

Structural framework for DNA translocation via the viral portal protein

Tailed bacteriophages and herpesviruses load their capsids with DNA through a tunnel formed by the portal protein assembly. Here we describe the X-ray structure of the bacteriophage SPP1 portal protein in its isolated 13-subunit form and the pseudoatomic structure of a 12-subunit assembly. The first defines the DNA-interacting segments (tunnel loops) that pack tightly against each other forming the most constricted part of the tunnel; the second shows that the functional dodecameric state must induce variability in the loop positions. Structural observations together with geometrical constraints dictate that in the portal-DNA complex, the loops form an undulating belt that fits and tightly embraces the helical DNA, suggesting that DNA translocation is accompanied by a 'mexican wave' of positional and conformational changes propagating sequentially along this belt.     

Comparison of the physical properties and assembly pathways of the related bacteriophages T7, T3 and phi II

To understand constraints on the evolution of bacteriophage assembly, the structures, electrophoretic mobilities (mu) and assembly pathways of the related double-stranded DNA bacteriophages T7, T3 and phi II, have been compared. The characteristics of the following T7, T3 and phi II capsids in these assembly pathways have also been compared: (1) a DNA-free procapsid (capsid I) that packages DNA during assembly; (b) a DNA packaging-associated conversion product of capsid I (capsid II). The molecular weights of the T3 and phi II genomes were 25.2 X 10(6) and 25.9 (+/- 0.2) X 10(6) (26.44 X 10(6) for T7, as previously determined), as determined by agarose gel electrophoresis of intact genomes. The radii of T7, T3 and phi II bacteriophages were indistinguishable by sieving during agarose gel electrophoresis (+/- 4%) and measurement of the bacteriophage hydration (+/- 2%) (30.1 nm for T7, as previously determined). Assuming a T = 7 icosahedral lattice for the arrangement of the major capsid subunits (p10A) of T7, T3 and phi II best explains these data and data previously obtained for T7. At pH 7.4 and an ionic strength of 1.2, the solid-support-free mu values (mu 0 values) of T7, T3 and phi II bacteriophages, obtained by extrapolation of mu during agarose gel electrophoresis to an agarose concentration of 0 and correction for electro-osmosis, were -0.71, -0.91 and -1.17(X 10(-4) cm2V-1 s-1. The mu 0 values of T7, T3 and phi II capsids I were -1.51, -1.58 and -2.07(X 10(-4] cm2V-1 s-1. For the capsids II, these mu 0 values were -0.82, -1.07 and -1.37(X 10(-4] cm2V-1 s-1. The tails of all three bacteriophages were positively charged and the capsid envelopes (heads) were negatively charged. In all cases the procapsid had a negative mu 0 value larger in magnitude than the negative mu 0 value for bacteriophage or capsid II. A trypsin-sensitive region in capsid I-associated, but not capsid II-associated, T3 p10A was observed (previously observed for T7). The largest fragment of trypsinized capsid I-associated p10A had the same molecular weight in T7 and T3, although the T3 p10A is 18% more massive than the T7 p10A. It is suggested that the trypsin-resistant region of capsid I-associated p10A determines the radius of the bacteriophage capsid.     

Virus capsid expansion driven by the capture of mobile surface loops

The capsids of tailed-DNA bacteriophages first assemble as procapsids, which mature by converting into a new form that is strong enough to contain a densely packed viral chromosome. We demonstrate that the intersubunit crosslinking that occurs during maturation of HK97 capsids actually promotes the structural transformation. Small-angle X-ray scattering and crosslinking assays reveal that a shift in the crosslink pattern accompanies conversion of a semimature particle, Expansion Intermediate-I/II, to a more mature state, Balloon. This transition occurs in a switch-like fashion. We find that crosslink formation shifts the global conformational balance to favor the balloon state. A pseudoatomic model of EI-I/II derived from cryo-EM provides insight into the relationship between crosslink formation and conformational switching.     

Buoyant density sedimentation of macromolecules in sodium iothalamate density gradients.

Nucleic acids, bacteriophages, phage capsids, and a DNA-capsid complex have been centrifuged to an equilibrium buoyant density in sodium iothalamate density gradients. Nucleic acids have comparatively high hydrations and are less dense than proteins in these gradients. Sodium iothalamate gradients can be used to separate DNA from RNA, single-chain DNA from double-chain DNA and to separate bacteriophage T7 and λ deletion mutants from the respective wild-type phage.The DNA packaged in bacteriophage T7 appears to be less hydrated than free DNA in sodium iothalamate gradients. There is evidence that the hydration of DNA packaged in phage T7 is restricted by the volume of the phage head. The total volume of phage T7 was estimated to be 1.32 × 10⁻¹⁶ ml. The volume available to package phage T7 DNA was estimated to be 2.2 times the volume of the B form of T7 DNA.     

DNA Heats Up: Energetics of Genome Ejection from Phage Revealed by Isothermal Titration Calorimetry

Most bacteriophages are known to inject their double-stranded DNA into bacteria upon receptor binding in an essentially spontaneous way. This downhill thermodynamic process from the intact virion to the empty viral capsid plus released DNA is made possible by the energy stored during active packaging of the genome into the capsid. Only indirect measurements of this energy have been available until now, using either single-molecule or osmotic suppression techniques. In this work, we describe for the first time the use of isothermal titration calorimetry to directly measure the heat released (or, equivalently, the enthalpy) during DNA ejection from phage λ, triggered in solution by a solubilized receptor. Quantitative analyses of the results lead to the identification of thermodynamic determinants associated with DNA ejection. The values obtained were found to be consistent with those previously predicted by analytical models and numerical simulations. Moreover, the results confirm the role of DNA hydration in the energetics of genome confinement in viral capsids.     

Structure of the Small Outer Capsid Protein, Soc: A Clamp for Stabilizing Capsids of T4-like Phages

Many viruses need to stabilize their capsid structure against DNA pressure and for survival in hostile environments. The 9-kDa outer capsid protein (Soc) of bacteriophage T4, which stabilizes the virus, attaches to the capsid during the final stage of maturation. There are 870 Soc molecules that act as a “glue” between neighboring hexameric capsomers, forming a “cage” that stabilizes the T4 capsid against extremes of pH and temperature. Here we report a 1.9 Å resolution crystal structure of Soc from the bacteriophage RB69, a close relative of T4. The RB69 crystal structure and a homology model of T4 Soc were fitted into the cryoelectron microscopy reconstruction of the T4 capsid. This established the region of Soc that interacts with the major capsid protein and suggested a mechanism, verified by extensive mutational and biochemical studies, for stabilization of the capsid in which the Soc trimers act as clamps between neighboring capsomers. The results demonstrate the factors involved in stabilizing not only the capsids of T4-like bacteriophages but also many other virus capsids.     

NMR assignments for the telokin-like domain of bacteriophage P22 coat protein

The bacteriophage P22 virion is assembled from identical coat protein monomers in a complex reaction that is generally conserved among tailed, double-stranded DNA bacteriophages and viruses. Many coat proteins of dsDNA viruses have structures based on the HK97 fold, but in some viruses and phages there are additional domains. In the P22 coat protein, a “telokin-like” domain was recently identified, whose structure has not yet been characterized at high-resolution. Two recently published low-resolution cryo-EM reconstructions suggest markedly different folds for the telokin-like domain that lead to alternative conclusions about its function in capsid assembly and stability. Here we report ¹H, ¹⁵N, and ¹³C NMR resonance assignments for the telokin-like domain. The secondary structure predicted from the chemical shift values obtained in this work shows significant discrepancies from both cryo-EM models but agrees better with one of the models. In particular, the functionally important “D-loop” in one model shows chemical shifts and solvent exchange protection more consistent with β-sheet structure. Our work will set the basis for a high-resolution NMR structure determination of the telokin-like domain that will help improve the cryo-EM models, and in turn lead to a better understanding of how coat protein monomers assemble into the icosahedral capsids required for virulence.     

Structure and Energetics of Encapsidated DNA in Bacteriophage HK97 Studied by Scanning Calorimetry and Cryo-electron Microscopy

Encapsidation of duplex DNA by bacteriophages represents an extreme case of genome condensation, reaching near-crystalline concentrations of DNA. The HK97 system is well suited to study this phenomenon in view of the detailed knowledge of its capsid structure. To characterize the interactions involved, we combined calorimetry with cryo-electron microscopy and native gel electrophoresis. We found that, as in other phages, HK97 DNA is organized in coaxially wound nested shells. When DNA-filled capsids (heads) are scanned in buffer containing 1 mM Mg²⁺, DNA melting and capsid denaturation both contribute to the complex thermal profile between 82 °C and 96 °C. In other conditions (absence of Mg²⁺ and lower ionic strength), DNA melting shifts to lower temperatures and the two events are resolved. Heads release their DNA at temperatures well below the onset of DNA melting or capsid denaturation. We suggest that, on heating, the internal pressure increases, causing the DNA to exit—probably via the portal vertex-while the capsid, although largely intact, sustains local damage that leads to an earlier onset of thermal denaturation. Heads differ structurally from empty capsids in the curvature of their protein shell, a change attributable to outwards pressure exerted by the DNA. We propose that this transition is sensed by the portal that is embedded in the capsid wall, whereupon the structure of the portal and its interactions with terminase, the packaging enzyme, are altered, thus signaling that packaging is at or approaching completion.     

Replication of herpesvirus DNA. V. Maturation of concatemeric DNA of pseudorabies virus to genome length is related to capsid formation.

The maturation of pseudorabies virus DNA from the replicative concatemeric form to molecules of genome length was examined using nine DNA+ temperature-sensitive mutants of pseudorabies virus, each belonging to a different complementation group. At the nonpermissive temperature, cells infected with each of the mutants synthesized concatemeric DNA. Cleavage of the concatemeric DNA to genome-length viral DNA was defective in all the DNA+ ts mutants tested, indicating that several viral gene products are involved in the DNA maturation process. In none of the ts mutant-infected cells were capsids with electron-dense cores (containing DNA) formed. Empty capsids with electron-translucent cores were, however, formed in cells infected with six of the nine temperature-sensitive mutants; in cells infected with three of the mutants, no capsid assembly occurred. Because these three mutants are deficient both in maturation of DNA and in the assembly of viral capsids, we conclude that maturation of viral DNA is dependent upon the assembly of capsids. In cells infected with two of the mutants (tsN and tsIE13), normal maturation of viral DNA occurred after shiftdown of the cells to the permissive temperature in the presence of cycloheximide, indicating that the temperature-sensitive proteins involved in DNA maturation became functional after shiftdown. Furthermore, because cycloheximide reduces maturation of DNA in wild-type-infected cells but not in cells infected with these two mutants, we conclude that a protein(s) necessary for the maturation of concatemeric DNA, which is present in limiting amounts during the normal course of infection, accumulated in the mutant-infected cells at the nonpermissive temperature. Concomitant with cleavage of concatemeric DNA, full capsids with electron-dense cores appeared after shiftdown of tsN-infected cells to the permissive temperature, indicating that there may be a correlation between maturation of DNA and formation of full capsids. The number of empty and full capsids (containing electron-dense cores) present in tsN-infected cells incubated at the nonpermissive temperature, as well as after shiftdown to the permissive temperature in the presence of cycloheximide, was determined by electron microscopy and by sedimentation analysis in sucrose gradients. After shiftdown to the permissive temperature in the presence of cycloheximide, the number of empty capsids present in tsN-infected cells decreased with a concomitant accumulation of full capsids, indicating that empty capsids are precursors to full capsids.     

Uncoating the herpes simplex virus genome

Initiation of infection by herpes simplex virus (HSV-1) involves a step in which the parental virus capsid docks at a nuclear pore and injects its DNA into the nucleus. Once "uncoated" in this way, the virus DNA can be transcribed and replicated. In an effort to clarify the mechanism of DNA injection, we examined DNA release as it occurs in purified capsids incubated in vitro. DNA ejection was observed following two different treatments, trypsin digestion of capsids in solution, and heating of capsids after attachment to a solid surface. In both cases, electron microscopic analysis revealed that DNA was ejected as a single double helix with ejection occurring at one vertex presumed to be the portal. In the case of trypsin-treated capsids, DNA release was found to correlate with cleavage of a small proportion of the portal protein, UL6, suggesting that UL6 cleavage may be involved in making the capsid permissive for DNA ejection. In capsids bound to a solid surface, DNA ejection was observed only when capsids were warmed above 4 degrees C. The proportion of capsids releasing their DNA increased as a function of incubation temperature with nearly all capsids ejecting their DNA when incubation was at 37 degrees C. The results demonstrate heterogeneity among HSV-1 capsids with respect to their sensitivity to heat-induced DNA ejection. Such heterogeneity may indicate a similar heterogeneity in the ease with which capsids are able to deliver DNA to the infected cell nucleus.