Identification and characterization of a thermostable and cobalt-dependent amidase from Burkholderia phytofirmans ZJB-15079 for efficient synthesis of (R)-3,3,3-trifluoro-2-hydroxy-2-methylpropionic acid

Enantiomerically pure 3,3,3-trifluoro-2-hydroxy-2-methylpropionic acids are important chiral building blocks for a series of pharmaceuticals. Here, a bacteria strain with 3,3,3-trifluoro-2-hydroxy-2-methylpropanamide-degrading ability was screened and identified as Burkholderia phytofirmans ZJB-15079, from which a novel amidase (Bp-Ami) was cloned and demonstrated to be capable of kinetic resolution of rac-3,3,3-trifluoro-2-hydroxy-2-methylpropanamide to optically pure (R)-3,3,3-trifluoro-2-hydroxy-2-methylpropionic acid. Phylogenetic analysis revealed that Bp-Ami was closely located to the acetamidase/formamidase (FmdA_AmdA) family, and it shared high homology with acetamidases. Bp-Ami was found to be the first cobalt-dependent FmdA_AmdA family amidase. The enzyme activity was significantly increased by 37.7-fold in the presence of 1 mM Co²⁺, with a specific activity of 753.5 U/mg, K _m value of 24.73 mM, and k _cat /K _m value of 22.47 mM⁻¹ s⁻¹. As an enzyme from mesophile, Bp-Ami exhibited extreme thermostability with a half-life of 47.93 h at 80 °C, which was even superior to other reported amidases from thermophiles. The whole cell catalysis of 200 g/L 3,3,3-trifluoro-2-hydroxy-2-methylpropanamide by Escherichia coli harboring Bp-Ami (5 g/L) resulted in 44 % yield and an enantiomeric excess (ee _p) of 95 % within 10 min (E = 86). The high substrate tolerance, high specific activity, and extreme thermostability demonstrated the great potential of Bp-Ami for efficient biocatalytic synthesis of (R)-3,3,3-trifluoro-2-hydroxy-2-methylpropionic acid.

     

Nitrile Hydratase-Catalyzed Production of Nicotinamide from 3-Cyanopyridine in Rhodococcus rhodochrous J1

Nitrile hydratase, which occurs abundantly in cells of Rhodococcus rhodochrous J1 isolated from soil samples, catalyzes the hydration of 3-cyanopyridine to nicotinamide. By using resting cells, the reaction conditions for nicotinamide production were optimized. Under the optimum conditions, 100% of the added 12 M 3-cyanopyridine was converted to nicotinamide without the formation of nicotinic acid, and the highest yield achieved was 1,465 g of nicotinamide per liter of reaction mixture containing resting cells (1.48 g as dry cell weight) in 9 h. The nicotinamide produced was crystallized and then identified physicochemically. The further conversion of the nicotinamide to nicotinic acid was due to the low activity of nicotinamide as a substrate for the amidase(s) present in this organism.     

Purification and characterization of a novel thermo-active amidase from Geobacillus subterraneus RL-2a

A thermostable amidase produced by Geobacillus subterraneus RL-2a was purified to homogeneity, with a yield of 9.54 % and a specific activity of 48.66 U mg^?1. The molecular weight of the native enzyme was estimated to be 111 kDa. The amidase of G. subterraneus RL-2a is constitutive in nature, active at a broad range of pH (4.5–11.5) and temperature (40–90 °C) and has a half-life of 5 h and 54 min at 70 °C. Inhibition of enzyme activity was observed in the presence of metal ions, such as Co²⁺, Hg²⁺, Cu²⁺, Ni²⁺, and thiol reagents. The presence of mid-chain aliphatic and amino acid amides enhances the enzymatic activity. The acyl transferase activity was detected with propionamide, butyramide and nicotinamide. The enzyme showed moderate stability toward toluene, carbon tetrachloride, benzene, ethylene glycol except acetone, ethanol, butanol, propanol and dimethyl sulfoxide. The K _m and V _max of the purified amidase with nicotinamide were 6.02 ± 0.56 mM and 132.6 ± 4.4 μmol min^?1 mg^?1 protein by analyzing Michaelis–Menten kinetics. The results of MALDI-TOF analysis indicated that this amidase has homology with the amidase of Geobacillus sp. C56-T3 (gi|297530427). It is the first reported wide-spectrum thermostable amidase from a thermophilic G. subterraneus.     

Bioprocess development for nicotinic acid hydroxamate synthesis by acyltransferase activity of Bacillus smithii strain IITR6b2

In this work, acyltransferase activity of a new bacterial isolate Bacillus smithii strain IITR6b2 was utilized for the synthesis of nicotinic acid hydroxamate (NAH), a heterocyclic class of hydroxamic acid. NAH is an important pyridine derivative and has found its role as bioligand, urease inhibitor, antityrosinase, antioxidant, antimetastatic, and vasodilating agents. Amidase having acyltransferase activity with nicotinamide is suitable for nicotinic acid hydroxamate production. However, amidase can also simultaneously hydrolyze nicotinamide and nicotinic acid hydroxamate to nicotinic acid. Nicotinic acid is an undesirable by-product and thus any biocatalytic process involving amidase for nicotinic acid hydroxamate production needs to have high ratios of acyltransferase to amide hydrolase and acyltransferase to nicotinic acid hydroxamate hydrolase activity. Isolate Bacillus smithii strain IITR6b2 was found to have 28- and 12.3-fold higher acyltransferase to amide and hydroxamic acid hydrolase activities, respectively. This higher ratio resulted in a limited undesirable by-product, nicotinic acid (NA) synthesis. The optimal substrate/co-substrate ratio, pH, temperature, incubation time, and resting cells concentration were 200/250 mM, 7, 30 °C, 40 min, and 0.7 mg_DCW ml^?1, respectively, and 94.5 % molar conversion of nicotinamide to nicotinic acid hydroxamate was achieved under these reaction conditions. To avoid substrate inhibition effect, a fed-batch process based on the optimized parameters with two feedings of substrates (200/200 mM) at 40-min intervals was developed and a molar conversion yield of 89.4 % with the productivity of 52.9 g h^?1 g _DCW ^?1 was achieved at laboratory scale. Finally, 6.4 g of powder containing 58.5 % (w/w) nicotinic acid hydroxamate was recovered after lyophilization and further purification resulted in 95 % pure product.     

A comparative study on the production of amidase using immobilized and dehydrated immobilized cells of Pseudomonas putida MTCC 6809

Pseudomonas putida MTCC 6809, a plant growth promoting rhizobacteria producing amidase was isolated from the rhizosphere of Pisum sativum. The cells were immobilized in sodium alginate for the production of amidase and the effect of dehydration on immobilized beads were studied. Optimization of process parameters for amidase production was carried out to enhance enzyme production using immobilized cells. From the results it is clear that 2% and 3% (w/v) of alginate were suitable for amidase production with 12.8 and 13 U/ml activity, respectively after 36 h of incubation. Among the various substrates studied acetamide (2% w/v) was a good inducer of amidase. It was observed that immobilized catalysts could be recycled up to five batches. Amidase production was observed in both free and immobilized cells, nevertheless immobilization is much favored in comparison to free cells, as it leads to reusability of beads, lesser contamination, consistent amidase production and adaptability to wide range of culture conditions. The relative enzyme activity with the dehydrated beads was only 27% in comparison to hydrated beads, it is possible to pack considerably more into a fixed volume as the relative volume of dehydrated beads is 20%. Even though consistent amidase production was difficult to achieve using dehydrated beads, which may have certain advantages like less chances for microbial contamination and easy to transport.     

Design and high-level expression of a hybrid antimicrobial peptide LF15-CA8 in Escherichia coli

Antimicrobial peptides (AMPs) have been paid considerable attention owing to their broad-spectrum antimicrobial activity and have great potential as novel antimicrobials. In this study, a novel hybrid peptide LF15-CA8 was designed on the basis of bovine lactoferricin (LfcinB) and cecropin A. The gene segment encoding LF15-CA8 was synthesized and cloned into pGEX-4T-BH to form pGEX-4T-LC1 containing one copy of the LF15-CA8 coding region. A series of recombinant vectors containing up to six multiple-copy LF15-CA8 coding regions, i.e., pGEX-4T-LCn (n = 1–6), were subsequently constructed, and used for transformation in Escherichia coli BL21(DE3). After induction with IPTG, pGEX-4T-LC1 and pGEX-4T-LC2 transformants successfully expressed fusion proteins GST-LF15-CA8 and GST-(LF15-CA8)₂ in the form of inclusion bodies, respectively. The inclusion bodies were dissolved and the peptide was successfully released in 70 % formic acid in a single step. After purification, about 10.0 mg of the recombinant peptide LF15-CA8 with purity more than 97 % was obtained from 1 l of bacteria culture of pGEX-4T-LC2 transformants. LF15-CA8 caused an increase in antibacterial activity against Gram-positive bacterium (Staphylococcus aureus ATCC 25923) compared with the parent peptides and did not show obvious hemolytic activity against human erythrocytes in the range of effective antibacterial concentration. These results suggest that the peptide LF15-CA8 could be a promising candidate for therapeutic applications, and may lead to a cost-effective solution for the large-scale production of AMPs.     

The cell wall amidase AmiB is essential for Pseudomonas aeruginosa cell division,drug resistance and viability

The physiological function of cell wall amidases has been investigated in several proteobacterial species. In all cases, they have been implicated in the cleavage of cell wall material synthesized by the cytokinetic ring. Although typically non‐essential, this activity is critical for daughter cell separation and outer membrane invagination during division. In Escherichia coli, proteins with LytM domains also participate in cell separation by stimulating amidase activity. Here, we investigated the function of amidases and LytM proteins in the opportunistic pathogen Pseudomonas aeruginosa. In agreement with studies in other organisms, ^PaAmiB and three LytM proteins were found to play crucial roles in P. aeruginosa cell separation, envelope integrity and antibiotic resistance. Importantly, the phenotype of amidase‐defective P. aeruginosa cells also differed in informative ways from the E. coli paradigm; ^PaAmiB was found to be essential for viability and the successful completion of cell constriction. Our results thus reveal a key role for amidase activity in cytokinetic ring contraction. Furthermore, we show that the essential function of ^PaAmiB can be bypassed in mutants activated for a Cpx‐like envelope stress response, suggesting that this signaling system may elicit the repair of division machinery defects in addition to general envelope damage.     

Molecular Engineering of Fungal GH5 and GH26 Beta-(1,4)-Mannanases toward Improvement of Enzyme Activity

Microbial mannanases are biotechnologically important enzymes since they target the hydrolysis of hemicellulosic polysaccharides of softwood biomass into simple molecules like manno-oligosaccharides and mannose. In this study, we have implemented a strategy of molecular engineering in the yeast Yarrowia lipolytica to improve the specific activity of two fungal endo-mannanases, PaMan5A and PaMan26A, which belong to the glycoside hydrolase (GH) families GH5 and GH26, respectively. Following random mutagenesis and two steps of high-throughput enzymatic screening, we identified several PaMan5A and PaMan26A mutants that displayed improved kinetic constants for the hydrolysis of galactomannan. Examination of the three-dimensional structures of PaMan5A and PaMan26A revealed which of the mutated residues are potentially important for enzyme function. Among them, the PaMan5A-G311S single mutant, which displayed an impressive 8.2-fold increase in k_cat/K_M due to a significant decrease of K_M, is located within the core of the enzyme. The PaMan5A-K139R/Y223H double mutant revealed modification of hydrolysis products probably in relation to an amino-acid substitution located nearby one of the positive subsites. The PaMan26A-P140L/D416G double mutant yielded a 30% increase in k_cat/K_M compared to the parental enzyme. It displayed a mutation in the linker region (P140L) that may confer more flexibility to the linker and another mutation (D416G) located at the entrance of the catalytic cleft that may promote the entrance of the substrate into the active site. Taken together, these results show that the directed evolution strategy implemented in this study was very pertinent since a straightforward round of random mutagenesis yielded significantly improved variants, in terms of catalytic efiiciency (k_cat/K_M).     

Insights into Exo- and Endoglucanase Activities of Family 6 Glycoside Hydrolases from Podospora anserina

The ascomycete Podospora anserina is a coprophilous fungus that grows at late stages on droppings of herbivores. Its genome encodes a large diversity of carbohydrate-active enzymes. Among them, four genes encode glycoside hydrolases from family 6 (GH6), the members of which comprise putative endoglucanases and exoglucanases, some of them exerting important functions for biomass degradation in fungi. Therefore, this family was selected for functional analysis. Three of the enzymes, P. anserina Cel6A (PaCel6A), PaCel6B, and PaCel6C, were functionally expressed in the yeast Pichia pastoris. All three GH6 enzymes hydrolyzed crystalline and amorphous cellulose but were inactive on hydroxyethyl cellulose, mannan, galactomannan, xyloglucan, arabinoxylan, arabinan, xylan, and pectin. PaCel6A had a catalytic efficiency on cellotetraose comparable to that of Trichoderma reesei Cel6A (TrCel6A), but PaCel6B and PaCel6C were clearly less efficient. PaCel6A was the enzyme with the highest stability at 45°C, while PaCel6C was the least stable enzyme, losing more than 50% of its activity after incubation at temperatures above 30°C for 24 h. In contrast to TrCel6A, all three studied P. anserina GH6 cellulases were stable over a wide range of pHs and conserved high activity at pH values of up to 9. Each enzyme displayed a distinct substrate and product profile, highlighting different modes of action, with PaCel6A being the enzyme most similar to TrCel6A. PaCel6B was the only enzyme with higher specific activity on carboxymethylcellulose (CMC) than on Avicel and showed lower processivity than the others. Structural modeling predicts an open catalytic cleft, suggesting that PaCel6B is an endoglucanase.     

Hydration of cyanopyridine to nicotinamide by whole cell nitrile hydratase

Summary 3-cyanopyridine was hydrated to nicotinamide by whole cells ofBrevibacterium R-312 containing nitrile hydratase. Cells used for kinetic studies had an initial activity of 0.30 mg nicotinamide/mg cells(dry)-min and storage half-lives (pH 8) of approximately 100 days, 10 days, 5 days and less than 1 day at 4°C, 10°C, 25°C, and 30°C respectively. Temperature and pH maxima were 35°C and 8.0, respectively. Fermentations gave a maximum total hydratase activity of 1.25 mg nicotinamide/min, but at this maximum the amidase activity was unacceptably high (25% of the hydratase activity): nicotinamide was converted too rapidly to nicotinic acid. But systematic fermentation studies (7 1) showed that harvesting at mid-log phase (18–20 h) prior to the attainment of maximum total activity gave reasonably high levels of hydratase (0.3 mg nicotinamide/mg cells-min) and acceptable levels of amidase (0.03 mg nicotinic acid/mg cells-min).     

Biotransformation of aromatic and heterocyclic amides by amidase of whole cells of Rhodococcus sp. MTB5: Biocatalytic characterization and substrate specificity

In this study, an amidohydrolase activity of amidase in whole cells of Rhodococcus sp. MTB5 has been used for the biotransformation of aromatic, monoheterocyclic and diheterocyclic amides to corresponding carboxylic acids. Benzoic acid, nicotinic acid and pyrazinoic acid are carboxylic acids which have wide industrial applications. The amidase of this strain is found to be inducible in nature. The biocatalytic conditions for amidase present in the whole cells of MTB5 were optimized against benzamide. The enzyme exhibited optimum activity in 50?mM potassium phosphate buffer pH 7.0. The optimum temperature and substrate concentrations for this enzyme were 50?°C and 50?mM, respectively. The enzyme was quite stable for more than 6?h at 30?°C. It showed substrate specificity against different amides, including aliphatic, aromatic and heterocyclic amides. Under optimized reaction conditions, the amidase is capable of converting 50?mM each of benzamide, nicotinamide and pyrazinamide to corresponding acids within 100, 160 and 120?min, respectively, using 5?mg dry cell mass (DCM) per mL of reaction mixture. The respective percent conversion of these amides was 95.02%, 98.00% and 98.44% achieved by whole cells. The amidase in whole cells can withstand as high as 383?mM concentration of product in a reaction mixture and above which it undergoes product feedback inhibition. The results of this study suggest that Rhodococcus sp. MTB5 amidase has the potential for large-scale production of carboxylic acids of industrial value.     

Solvent free biocatalytic synthesis of isoniazid from isonicotinamide using whole cell of Bacillus smithii strain IITR6b2

A biocatalytic route for the synthesis of isoniazid, an important first-line antitubercular drug, in aqueous system is presented. The reported bioprocess is a greener method, does not involve any hazardous reagent and takes place under mild reaction conditions. Whole cell amidase of Bacillus smithii strain IITR6b2 having acyltransferase activity was utilized for its ability to transfer acyl group of isonicotinamide to hydrazine–2HCl in aqueous medium. B. smithii strain IITR6b2 possessed 3 folds higher acyltransferase activity as compared to amide hydrolase activity and this ratio was further improved to 4.5 by optimizing concentration of co-substrate hydrazine–2HCl. Various key parameters were optimized and under the optimum reaction conditions of pH (7, phosphate buffer 100 mM), temperature (30 °C), substrate/co-substrate concentration (100/1000 mM) and resting cells concentration (2.0 mg_dcw/ml), 90.4% conversion of isonicotinamide to isoniazid was achieved in 60 min. Under these conditions, a fed batch process for production of isoniazid was developed and resulted in the accumulation of 439 mM of isoniazid with 87.8% molar conversion yield and productivity of 6.0 g/h/g_dcw. These results demonstrated that enzymatic synthesis of isoniazid using whole cells of B. smithii strain IITR6b2 might present an efficient alternative route to the chemical synthesis procedures without the involvement of organic solvent.     

Enantioselective production of 2,2-dimethylcyclopropane carboxylic acid from 2,2-dimethylcyclopropane carbonitrile using the nitrile hydratase and amidase of Rhodococcus erythropolis ATCC 25544

The enantioselective production of (S)-2,2-dimethylcyclopropane carboxylic acid was investigated in 53 Rhodococcus and Pseudomonas related strains. Rhodococcus erythropolis ATCC 25544 was selected as it showed the highest enantioselectivity. The enantioselectivity was due to the amidase activity in a two-step reaction involving nitrile hydratase. The enantiomeric excess of the amidase was highest at pH 7.0 and decreased significantly above 20 °C. For the enantioselective production of (S)-2,2-dimethylcyclopropane carboxylic acid, the optimum reaction conditions of the cells were determined to be pH 7.0, 20 °C, and 10% (v/v) methanol and were the same as the optimum pH and temperature for the enantioselective conversion by the amidase. Under these conditions, the R. erythropolis ATCC 25544 cells, which harbored nitrile hydratase and amidase enzymes, produced 45 mM (S)-2,2-dimethylcyclopropane carboxylic acid from racemic 100 mM 2,2-dimethylcyclopropane carbonitrile with an 81.8% enantiomeric excess after 64 h.     

A lipoprotein allosterically activates the CwlD amidase during Clostridioides difficile spore formation

Spore-forming pathogens like Clostridioides difficile depend on germination to initiate infection. During gemination, spores must degrade their cortex layer, which is a thick, protective layer of modified peptidoglycan. Cortex degradation depends on the presence of the spore-specific peptidoglycan modification, muramic-∂-lactam (MAL), which is specifically recognized by cortex lytic enzymes. In C. difficile, MAL production depends on the CwlD amidase and its binding partner, the GerS lipoprotein. To gain insight into how GerS regulates CwlD activity, we solved the crystal structure of the CwlD:GerS complex. In this structure, a GerS homodimer is bound to two CwlD monomers such that the CwlD active sites are exposed. Although CwlD structurally resembles amidase_3 family members, we found that CwlD does not bind Zn²⁺ stably on its own, unlike previously characterized amidase_3 enzymes. Instead, GerS binding to CwlD promotes CwlD binding to Zn²⁺, which is required for its catalytic mechanism. Thus, in determining the first structure of an amidase bound to its regulator, we reveal stabilization of Zn²⁺ co-factor binding as a novel mechanism for regulating bacterial amidase activity. Our results further suggest that allosteric regulation by binding partners may be a more widespread mode for regulating bacterial amidase activity than previously thought.     

Cycloamylose-accelerated cleavage of acylimidazoles

Hydrolyses of N-trans-cinnamoylimidazole (1) and N-acetylimidazole (2) were accelerated by cyclohexaamylose (α-CA) and cycloheptaamylose (β-CA) at 25°C. The cleavage of the amide bond in 1 at pH 9.0 was accelerated by α-CA and β-CA by 28- and 38-fold, respectively, whereas the cleavage of the amide bond in 2 at pH 7.0 was accelerated by α-CA and β-CA by 50- and 28-fold, respectively. The β-CA-accelerated hydrolysis of 1 proceeded via binding, acylation of β-CA, and deacylation of β-CA trans-cinnamate, which is consistent with the pathway used by serine proteases. The deuterium oxide solvent isotope effects for acylation and deacylation steps indicate nucleophilic attack in acylation and general basic attack in deacylation. The present finding of the acceleration by cycloamyloses in the cleavages of amide bonds in 1 and 2 indicates that cycloamyloses are an excellent model for hydrolytic enzymes.     

Staphylococcal Phage 2638A endolysin is lytic for Staphylococcus aureus and harbors an inter-lytic-domain secondary translational start site

Staphylococcus aureus is a notorious pathogen highly successful at developing resistance to virtually all antibiotics to which it is exposed. Staphylococcal phage 2638A endolysin is a peptidoglycan hydrolase that is lytic for S. aureus when exposed externally, making it a new candidate antimicrobial. It shares a common protein organization with more than 40 other reported staphylococcal peptidoglycan hydrolases. There is an N-terminal M23 peptidase domain, a mid-protein amidase 2 domain (N-acetylmuramoyl-L-alanine amidase), and a C-terminal SH3b cell wall-binding domain. It is the first phage endolysin reported with a secondary translational start site in the inter-lytic-domain region between the peptidase and amidase domains. Deletion analysis indicates that the amidase domain confers most of the lytic activity and requires the full SH3b domain for maximal activity. Although it is common for one domain to demonstrate a dominant activity over the other, the 2638A endolysin is the first in this class of proteins to have a high-activity amidase domain (dominant over the N-terminal peptidase domain). The high activity amidase domain is an important finding in the quest for high-activity staphylolytic domains targeting novel peptidoglycan bonds.     

Cloning and analysis of a new aliphatic amidase gene from Rhodococcus erythropolis TA37

A new aliphatic amidase gene (ami), having a less than 77% level of similarity with the nearest homologs, was identified in the Rhodococcus erythropolis TA37 strain, which is able to hydrolyze a wide range of amides. The amidase gene was cloned within a 3.7 kb chromosomal locus, which also contains putative acetyl-CoA ligase and ABC-type transporter genes. The structure of this locus in the R. erythropolis TA37 strain differs from the structure of loci in other Rhodococcus strains. The amidase gene is expressed in Escherichia coli cells. It was demonstrated that amidase (generated in the recombinant strain) efficiently hydrolyzes acetamide (aliphatic amide) and does not use 4′-nitroacetanilide (N-substituted amide) as a substrate. Insertional inactivation of the amidase gene in the R. erythropolis TA37 strain results in a considerable decrease (by at least 6–7 times) in basal amidase activity, indicating functional amidase activity in the R. erythropolis TA37 strain.     

Elevated level of the second messenger c-di-GMP in <Emphasis Type="Italic">Comamonas testosteroni</Emphasis> enhances biofilm formation and biofilm-based biodegradation of 3-chloroaniline

The bis-(3′-5′)-cyclic dimeric guanosine monophosphate (c-di-GMP) is a ubiquitous second messenger that determines bacterial lifestyle between the planktonic and biofilm modes of life. Although the role of c-di-GMP signaling in biofilm development and dispersal has been extensively studied, how c-di-GMP signaling influences environmental bioprocess activities such as biodegradation remains unexplored. To elucidate the impacts of elevating c-di-GMP level on environmental bioprocesses, we constructed a Comamonas testosteroni strain constitutively expressing a c-di-GMP synthase YedQ from Escherichia coli and examined its capability in biofilm formation and biodegradation of 3-chloroaniline (3-CA). The high c-di-GMP strain exhibited an increased binding to Congo red dye, a decreased motility, and an enhanced biofilm formation capability. In planktonic cultures, the strain with an elevated c-di-GMP concentration and the wild type could degrade 3-CA comparably well. However, under batch growth conditions with a high surface to volume ratio, an elevated c-di-GMP concentration in C. testosteroni significantly increased the contribution of biofilms in 3-CA biodegradation. In continuous submerged biofilm reactors, C. testosteroni with an elevated c-di-GMP level exhibited an enhanced 3-CA biodegradation and a decreased cell detachment rate. Taken together, this study provides a novel strategy to enhance biofilm-based biodegradation of toxic xenobiotic compounds through manipulating bacterial c-di-GMP signaling.     

Nitrile- and Amide-hydrolysing Activity in Kluyveromyces thermotolerans MGBY 37

Summary Forty yeast strains were screened for nitrile-hydrolysing activity. Among them Kluyveromyces thermotolerans MGBY 37 exhibited highest nitrile-hydrolysing activity (0.030 μmol/h/mg dry cell weight). This yeast contained a two-enzyme system i.e. nitrile hydratase (NHase, EC 4.2.1.84) and amidase (EC 3.5.1.4) for the hydrolysis of nitriles/amides to corresponding acids and ammonia. However, these enzymes had more affinity for N-heterocyclic aromatic and aromatic nitriles/amides rather than unsaturated and saturated aliphatic nitriles/amides. The NHase–amidase activity was constitutively produced by K. thermotolerence MGBY 37. Addition of acetonitrile in the medium enhanced the production of this activity while other nitriles and amides lowered the production of NHase–amidase activity. This organism thus exhibited two types of amidase i.e. a constitutive amidase having affinity for N-heterocyclic aromatic, unsaturated and saturated aliphatic amides and another inducible amidase with affinity for aromatic amides. Formamide proved to be the best inducer of the latter amidase activity. This is the first report on nitrile- and amide-hydrolysing activity in Kluyveromyces.     

Biofilm Filtrates of Pseudomonas aeruginosa Strains Isolated from Cystic Fibrosis Patients Inhibit Preformed Aspergillus fumigatus Biofilms via Apoptosis

Pseudomonas aeruginosa (Pa) and Aspergillus fumigatus (Af) colonize cystic fibrosis (CF) patient airways. Pa culture filtrates inhibit Af biofilms, and Pa non-CF, mucoid (Muc-CF) and nonmucoid CF (NMuc-CF) isolates form an ascending inhibitory hierarchy. We hypothesized this activity is mediated through apoptosis induction. One Af and three Pa (non-CF, Muc-CF, NMuc-CF) reference isolates were studied. Af biofilm was formed in 96 well plates for 16 h ± Pa biofilm filtrates. After 24 h, apoptosis was characterized by viability dye DiBAc, reactive oxygen species (ROS) generation, mitochondrial membrane depolarization, DNA fragmentation and metacaspase activity. Muc-CF and NMuc-CF filtrates inhibited and damaged Af biofilm (p<0.0001). Intracellular ROS levels were elevated (p<0.001) in NMuc-CF-treated Af biofilms (3.7- fold) compared to treatment with filtrates from Muc-CF- (2.5- fold) or non-CF Pa (1.7- fold). Depolarization of mitochondrial potential was greater upon exposure to NMuc-CF (2.4-fold) compared to Muc-CF (1.8-fold) or non-CF (1.25-fold) (p<0.0001) filtrates. Exposure to filtrates resulted in more DNA fragmentation in Af biofilm, compared to control, mediated by metacaspase activation. In conclusion, filtrates from CF-Pa isolates were more inhibitory against Af biofilms than from non-CF. The apoptotic effect involves mitochondrial membrane damage associated with metacaspase activation.