Escherichia coli low-copy-number plasmid R1 centromere parC forms a U-shaped complex with its binding protein ParR

The Escherichia coli low-copy-number plasmid R1 contains a segregation machinery composed of parC, ParR and parM. The R1 centromere-like site parC contains two separate sets of repeats. By atomic force microscopy (AFM) we show here that ParR molecules bind to each of the 5-fold repeated iterons separately with the intervening sequence unbound by ParR. The two ParR protein complexes on parC do not complex with each other. ParR binds with a stoichiometry of about one ParR dimer per each single iteron. The measured DNA fragment lengths agreed with B-form DNA and each of the two parC 5-fold interon DNA stretches adopts a linear path in its complex with ParR. However, the overall parC/ParR complex with both iteron repeats bound by ParR forms an overall U-shaped structure: the DNA folds back on itself nearly completely, including an angle of ~150°. Analysing linear DNA fragments, we never observed dimerized ParR complexes on one parC DNA molecule (intramolecular) nor a dimerization between ParR complexes bound to two different parC DNA molecules (intermolecular). This bacterial segrosome is compared to other bacterial segregation complexes. We speculate that partition complexes might have a similar overall structural organization and, at least in part, common functional properties.     

A Model for the Evolution of Biological Specificity: a Cross-Reacting DNA-Binding Protein Causes Plasmid Incompatibility

Few biological systems permit rigorous testing of how changes in DNA sequence give rise to adaptive phenotypes. In this study, we sought a simplified experimental system with a detailed understanding of the genotype-to-phenotype relationship that could be altered by environmental perturbations. We focused on plasmid fitness, i.e., the ability of plasmids to be stably maintained in a bacterial population, which is dictated by the plasmid''s replication and segregation machinery. Although plasmid replication depends on host proteins, the type II plasmid partitioning (Par) machinery is entirely plasmid encoded and relies solely on three components: parC, a centromere-like DNA sequence, ParR, a DNA-binding protein that interacts with parC, and ParM, which forms actin-like filaments that push two plasmids away from each other at cell division. Interactions between the Par operons of two related plasmids can cause incompatibility and the reduced transmission of one or both plasmids. We have identified segregation-dependent plasmid incompatibility between the highly divergent Par operons of plasmids pB171 and pCP301. Genetic and biochemical studies revealed that the incompatibility is due to the functional promiscuity of the DNA-binding protein ParR_pB171, which interacts with both parC DNA sequences to direct plasmid segregation, indicating that the lack of DNA binding specificity is detrimental to plasmid fitness in this environment. This study therefore successfully utilized plasmid segregation to dissect the molecular interactions between genotype, phenotype, and fitness.     

Repeated sequences including RS 1100 from Pseudomonas cepacia AC1100 function as IS elements

Summary Several lines of evidence were obtained that the previously identified, repeated sequence RS 1100 of Pseudomonas cepacia strain AC1100 undergoes transposition events. DNA sequences flanking the chlorohydroxy hydroquinone (CHQ) degradative genes of this organism were examined from sources, including several independently isolated cosmid clones from an AC1100 genomic library and genomic DNAs of two independently maintained wild-type AC1100 isolates. Hybridization and restriction endonuclease mapping studies revealed these sequences to be similar except for their numbers and distributions of RS1100 copies. A recombinant plasmid containing the immediate chq gene region and excluding any copies of RS1100 was conjugated into AC1100 mutant RHA5 which was shown to have undergone a deletion of its corresponding DNA. Hybridization and restriction mapping analyses of several reisolated plasmids revealed the presence of RS1100 sequences at different positions within either the vector or insert portions. One such plasmid contained tandem copies of RS1100 with an intervening DNA sequence also of AC1100 origin. Similar experiments involving introduction of the promoter probe plasmid pKT240 into wild-type AC1100 cells resulted in the acquisition of high-concentration streptomycin resistance by a number of recipients. The reisolated plasmids in most cases also conferred streptomycin resistance to Escherichia coli transformants and in each case were found to contain insertions close to the upstream portion of the aphC structural gene. These insertions alternatively contained RS1100 sequences or a newly identified 3400 by repeated sequence from AC1100. Based on these results, RS1100 has been redesignated as insertion sequence IS931 and the 3400 bp repeated sequence has been designated as IS932.[/ab]Abbreviations aphc aminoglycoside phosphotransferase gene - BSM basal salts medium - chq chlorohydroxy hydroquinone degradative gene(s) - dCTP deoxycytidine triphosphate - IS insertion sequence - Tft 2,4,5-T degradative phenotype     

A-tract clusters may facilitate DNA packaging in bacterial nucleoid

Molecular mechanisms of bacterial chromosome packaging are still unclear, as bacteria lack nucleosomes or other apparent basic elements of DNA compaction. Among the factors facilitating DNA condensation may be a propensity of the DNA molecule for folding due to its intrinsic curvature. As suggested previously, the sequence correlations in genome reflect such a propensity [Trifonov and Sussman (1980) Proc. Natl Acad. Sci. USA, 77, 3816–3820]. To further elaborate this concept, we analyzed positioning of A-tracts (the sequence motifs introducing the most pronounced DNA curvature) in the Escherichia coli genome. First, we observed that the A-tracts are over-represented and distributed ‘quasi-regularly’ throughout the genome, including both the coding and intergenic sequences. Second, there is a 10–12 bp periodicity in the A-tract positioning indicating that the A-tracts are phased with respect to the DNA helical repeat. Third, the phased A-tracts are organized in ~100 bp long clusters. The latter feature was revealed with the help of a novel approach based on the Fourier series expansion of the A-tract distance autocorrelation function. Since the A-tracts introduce local bends of the DNA duplex and these bends accumulate when properly phased, the observed clusters would facilitate DNA looping. Also, such clusters may serve as binding sites for the nucleoid-associated proteins that have affinities for curved DNA (such as HU, H-NS, Hfq and CbpA). Therefore, we suggest that the ~100 bp long clusters of the phased A-tracts constitute the ‘structural code’ for DNA compaction by providing the long-range intrinsic curvature and increasing stability of the DNA complexes with architectural proteins.     

Mutational analysis of centromeric DNA elements of Klayveromyces lactis and their role in determining the species specificity of the highly homologous centromeres from K. lactis and Saccharomyces cerevisiae

The centromere of Kluyveromyces lactis was delimited to a region of approximately 280 bp, encompassing KICDEI, II, and III. Removal of 6 bp from the right side of KlCDEIII plus flanking sequences abolished centromere function, and removal of 5 bp of KICDEI and flanking sequences resulted in strongly reduced centromere function. Deletions of 20–80 bp from KlCDEII resulted in a decrease in plasmid stability, indicating that KlCDEII must have a certain length for proper centromere function. Centromeres of K. lactis do not function in Saccharomyces cerevisiae and vice versa. Adapting the length of K1CDEII to that of ScCDEII did not improve KlCEN function in S. cerevisiae, while doubling the ScCDEII length did not improve ScCEN function in K. lactis. Thus the difference in CDEII length is not in itself responsible for the species specificity of the centromeres from each of the two species of budding yeast. A chimeric K. lactis centromere with ScCDEIII instead of KlCDEIII was no longer functional in K. lactis, but did improve plasmid stability in S. cerevisiae, although to a much lower level then a wild-type ScCEN. This indicates that the exact CDEIII sequence is important, and suggests that the flanking AT-rich CDEII has to conform to specific sequence requirements.     

Recombination between repeats in Escherichia coli by a recA-independent,proximity-sensitive mechanism

We have examined the influence of proximity on the efficiency of recombination between repeated DNA sequences in Escherichia coli. Our experiments have employed a plasmid-based assay to detect deletions between direct repeats of 100 bp. The rate of deletion of the juxtaposed direct repeats was reasonably high at 6 × 10^?5 per cell. A comparison of recA+ and recA mutant strains showed that these deletion events are primarily the result of recA-independent recombination at these homologous sequences. Random restriction fragments of yeast or E. coli genomic DNA were used to separate the two repeats. Deletion rates decreased over two orders of magnitude with increasing separation of up to 7 kb. There was a surprisingly strong effect of even short sequence separations, with insertions of a few hundred base pairs exhibiting 10-fold reductions of deletion rates. No effect of recA on the efficiency of deletion was observed at any distance between repeats.     

Integration of repeated sequences (pBR322) in the Bacillus subtilis 168 chromosome without affecting the genome structure

The Escherichia coli plasmid pBR322 sequence (4363 bp) was integrated at the met, pro, or leuB locus of the Bacillus subtilis chromosome without duplication of the flanking chromosomal regions. The integrated pBR322 was stably maintained as part of the chromosome regardless of its orientation or location. It was found that a DNA segment as large as 17 kb cloned in pBR322 can be readily transferred to the B. subtilis chromosome by transformation. It was demonstrated that a second pBR322 sequence could be effectively introduced at different regions of the chromosome by sequential transformation using chromosomal DNA isolated from a strain that had already acquired a pBR322 sequence at a different locus. Similarly, a third pBR322 sequence could be introduced. By this method, two or three pBR322 sequences can be incorporated at unlinked loci without affecting the overall structure of the B. subtilis genome.     

Curved DNA molecules migrate anomalously slowly in free solution

The electrophoretic mobility of a curved DNA restriction fragment taken from the VP1 gene in the SV40 minichromosome has been measured in polyacrylamide gels and free solution, using capillary electrophoresis. The 199 bp restriction fragment has an apparent bend angle of 46 ± 2° located at SV40 sequence position 1922 ± 2 bp [Lu Y.J., Weers B.D. and Stellwagen N. C. (2005) Biophys. J., 88, 1191–1206]. The ‘curvature module’ surrounding the apparent bend center contains five unevenly spaced A- and T-tracts, which are responsible for the observed curvature. The parent 199 bp fragment and sequence mutants containing at least one A-tract in the curvature module migrate anomalously slowly in free solution, as well as in polyacrylamide gels. Hence, the anomalously slow mobilities observed for curved DNA molecules in polyacrylamide gels are due in part to their anomalously slow mobilities in free solution. Analysis of the gel and free solution mobility decrements indicates that each A- or T-tract contributes independently, but not equally, to the curvature of the 199 bp fragment and its A-tract mutants. The relative contribution of each A- or T-tract to the observed curvature depends on its spacing with respect to the first A-tract in the curvature module.     

Alterations in the adenine-plus-thymine-rich region of CEN3 affect centromere function in Saccharomyces cerevisiae.

Centromere DNA from 11 of the 16 chromosomes of the yeast Saccharomyces cerevisiae have been analyzed and reveal three sequence elements common to each centromere, referred to as conserved centromere DNA elements (CDE). The adenine-plus-thymine (A + T)-rich central core element, CDE II, is flanked by two short conserved sequences, CDE I (8 base pairs [bp]) and CDE III (25 bp). Although no consensus sequence exists among the different CDE II regions, they do have three common features of sequence organization. First, the CDE II regions are similar in length, ranging from 78 to 86 bp measured from CDE I to the left boundary of CDE III. Second, the base composition is always greater than 90% A + T. Finally, the A and T residues in these segments are often arranged in runs of A and runs of T residues, sometimes with six or seven bases in a stretch. We constructed insertion, deletion, and replacement mutations in the CDE II region of the centromere from chromosome III, CEN3, designed to investigate the length and sequence requirements for function of the CDE II region of the centromere. We analyzed the effect of these altered centromeres on plasmid and chromosome segregation in S. cerevisiae. Our results show that increasing the length of CDE II from 84 to 154 bp causes a 100-fold increase in chromosome nondisjunction. Deletion mutations removing segments of the A + T-rich CDE II DNA also cause aberrant segregation. In some cases partial function could be restored by replacing the deleted DNA with fragments whose primary sequence or base composition is very different from that of the wild-type CDE II DNA. In addition, we found that identical mutations introduced into different positions in CDE II have very similar effects.     

The orotidine-5′-phosphate decarboxylase gene (URA3) of a methylotrophic yeast,Candida boidinii: Nucleotide sequence and its expression in Escherichia coli

Previously, we cloned a DNA fragment from a genomic library of a methylotrophic yeast, Candida boidinii. This 3.5-kb SalI fragment was capable of complementing the pyrF mutation in Escherichia coli. In this report, we identify this fragment as that harboring an orotidine-5′-phosphate decarboxylase (ODCase) gene (C. boidinii URA3); we have also determined the complete DNA sequence of the C. boidinii URA3 gene. The deduced amino acid sequence of the gene showed homology to ODCase genes from other sources, and it could complement the ura3 mutation of Saccharomyces cerevisiae. The DNA fragment, which harbored the C. boidinii URA3 gene, was able to express ODCase activity in the E. coli pyrF mutant strain without an exogenous E. coli promoter. From nested-deletion analysis, both the 5′-(136 bp) and 3′-(58 bp) flanking regions were shown to be required for pyrF-complementation of the E. coli mutant. The 5′-flanking region had sequences homologous to E. coli promoter consensus sequences (−35 and −10 regions) which may function in the expression of the C. boidinii URA3 gene in E. coli.     

Yeast centromere DNA is in a unique and highly ordered structure in chromosomes and small circular minichromosomes

We have examined the chromatin structure of the centromere regions of chromosomes III and XI in yeast by using cloned functional centromere DNAs (CEN3 and CEN11) as labeled probes. When chromatin from isolated nuclei is digested with micrococcal nuclease and the resulting DNA fragments separated electrophoretically and blotted to nitrocellulose filters, the centromeric nucleosomal sub-units are resolved into significantly more distinct ladders than are those from the bulk of the chromatin. A discrete protected region of 220–250 bp of CEN sequence flanked by highly nuclease-sensitive sites was revealed by mapping the exact nuclease cleavage sites within the centromeric chromatin. On both sides of this protected region, highly phased and specific nuclease cutting sites exist at nucleosomal intervals (160 bp) for a total length of 12–15 nucleosomal subunits. The central protected region in the chromatin of both centromeres spans the 130 bp segment that exhibits the highest degree of sequence homology (71%) between functional CEN3 and CEN11 DNAs. This unique chromatin structure is maintained on CEN sequences introduced into yeast on autonomously replicating plasmids, but is not propagated through foreign DNA sequences flanking the inserted yeast DNA.     

All 16 centromere DNAs from Saccharomyces cerevisiae show DNA curvature

All 16 centromere DNA regions of Saccharomyces cerevisiae including 90 bp framing sequences on either side were cloned. These 300 bp long centromere regions were analysed by native polyacrylamide gel electrophoresis and found to display a reduced mobility indicative of DNA curvature. The degree of curvature is centromere dependent. The experimental data were confirmed by computer analysis of the 3-dimensional structure of the CEN DNAs. Altogether these data provide further evidence for a model for budding yeast centromeres in which CEN DNA structure could be important for the assembly, activity and/or regulation of the centromere protein-DNA complex.     

Ultra-Low Background DNA Cloning System

Yeast-based in vivo cloning is useful for cloning DNA fragments into plasmid vectors and is based on the ability of yeast to recombine the DNA fragments by homologous recombination. Although this method is efficient, it produces some by-products. We have developed an “ultra-low background DNA cloning system” on the basis of yeast-based in vivo cloning, by almost completely eliminating the generation of by-products and applying the method to commonly used Escherichia coli vectors, particularly those lacking yeast replication origins and carrying an ampicillin resistance gene (Amp^r). First, we constructed a conversion cassette containing the DNA sequences in the following order: an Amp^r 5′ UTR (untranslated region) and coding region, an autonomous replication sequence and a centromere sequence from yeast, a TRP1 yeast selectable marker, and an Amp^r 3′ UTR. This cassette allowed conversion of the Amp^r-containing vector into the yeast/E. coli shuttle vector through use of the Amp^r sequence by homologous recombination. Furthermore, simultaneous transformation of the desired DNA fragment into yeast allowed cloning of this DNA fragment into the same vector. We rescued the plasmid vectors from all yeast transformants, and by-products containing the E. coli replication origin disappeared. Next, the rescued vectors were transformed into E. coli and the by-products containing the yeast replication origin disappeared. Thus, our method used yeast- and E. coli-specific “origins of replication” to eliminate the generation of by-products. Finally, we successfully cloned the DNA fragment into the vector with almost 100% efficiency.     

Nucleotide sequence and structural analysis of cryptic plasmid pBL90 from <Emphasis Type="Italic">Brevibacterium lactofermentum</Emphasis>

The nucleotide sequence of cryptic plasmid (designated as pBL90) detected in the cells of Brevibacterium lactofermentum DSM 1412 was determined. The length of plasmid DNA is 67826 bp. Comparison of the nucleotide sequence of pBL90 with known plasmid sequences showed no long regions of significant homology. Computer analysis of the plasmid DNA revealed 29 open reading frames (ORFs). The amino acid sequences of 15 ORFs (approximately 25% of plasmid length) have a high (>70%) level of identity to proteins from different plasmids of Corynebacterium representatives, including replicative proteins. Unusual in pBL90 is the presence of replicative genes from two different families and types of replication.     

Human 170 kDa and 180 kDa Topoisomerases II Bind Preferentially to Curved and Left-Handed Linear DNA

Abstract

The binding activities of the 170 kDa and the 180 kDa human topoisomerases II (topo IIa and topo IIβ) to linear DNA fragments with different degrees of curvature were characterized. In gel retardation experiments it was shown that both forms of the enzyme bind preferentially to a curved 287 bp fragment, forming a detectable stable complex. The affinity for straight DNA fragments of similar length is significantly lower. Both a commercially available topo IIa, isolated from placenta, and topo IIα and topo IIβ purified from nuclear extracts of the Namahva lymphoma tissue culture line gave similar results. The effects of double-stranded poly[d(A-T)], poly[d(G-C)], supercoiled plasmid DNA and linear Z-DNA on the topo II- complex with curved DNA were analyzed in competition experiments. The hierarchy of affinities of the 180 kDa topo IIβ for these DNAs has the order: linear left-handed DNA > supercoiled DNA ? curved DNA ? poly[d(A-T)] ? poly[d(G-C)]. The 170 kDa topo IIa binds with similar affinity to curved DNA and linear Z-DNA ? supercoiled DNA ? linear B- DNA The data imply that human topoisomerase II binding is more sensitive to DNA secondary structure than to DNA sequence per se. The ability of the enzyme to preferentially recognize a wide variety of sequences in unusual secondary structures suggests a mode of targeting the enzyme in vivo to regions of high negative supercoiling.     

The CHD remodeling factor Hrp1 stimulates CENP-A loading to centromeres

Centromeres of fission yeast are arranged with a central core DNA sequence flanked by repeated sequences. The centromere-associated histone H3 variant Cnp1 (SpCENP-A) binds exclusively to central core DNA, while the heterochromatin proteins and cohesins bind the surrounding outer repeats. CHD (chromo-helicase/ATPase DNA binding) chromatin remodeling factors were recently shown to affect chromatin assembly in vitro. Here, we report that the CHD protein Hrp1 plays a key role at fission yeast centromeres. The hrp1Δ mutant disrupts silencing of the outer repeats and central core regions of the centromere and displays chromosome segregation defects characteristic for dysfunction of both regions. Importantly, Hrp1 is required to maintain high levels of Cnp1 and low levels of histone H3 and H4 acetylation at the central core region. Hrp1 interacts directly with the centromere in early S-phase when centromeres are replicated, suggesting that Hrp1 plays a direct role in chromatin assembly during DNA replication.     

The region essential for efficient autonomous replication of pSa in Escherichia coli

Summary Comparative analyses were made between plasmid pSa17, a deletion derivative of pSa that is capable of replicating efficiently in Escherichia coli and plasmid pSa3, a derivative that is defective for replication. By comparing the restriction maps of these two derivatives, the regions essential for replication and for stable maintenance of the plasmid were determined. A 2.5 kb DNA segment bearing the origin of DNA replication of pSa17 was sequenced. A 36 kDa RepA protein was encoded in the region essential for replication. Downstream of the RepA coding region was a characteristic sequence including six 17 bp direct repeats, the possible binding sites of RepA protein, followed by AT-rich and GC-rich sequences. Furthermore, an 8 bp incomplete copy of the 17 bp repeat was found in the promoter region of the repA gene. Based on the hypothesis that RepA protein binds to this partial sequence as well as to intact 17 bp sequences, an autoregulatory system for the synthesis of RepA protein may be operative. Another open reading frame (ORF) was found in the region required for the stability of the plasmid. The putative protein encoded in this ORF showed significant homology to several site-specific recombination proteins. A possible role of this putative protein in stable maintenance of the plasmid is discussed.     

Genome sequence of Shigella flexneri 2a: insights into pathogenicity through comparison with genomes of Escherichia coli K12 and O157

We have sequenced the genome of Shigella flexneri serotype 2a, the most prevalent species and serotype that causes bacillary dysentery or shigellosis in man. The whole genome is composed of a 4 607 203 bp chromosome and a 221 618 bp virulence plasmid, designated pCP301. While the plasmid shows minor divergence from that sequenced in serotype 5a, striking characteristics of the chromosome have been revealed. The S.flexneri chromosome has, astonishingly, 314 IS elements, more than 7-fold over those possessed by its close relatives, the non-pathogenic K12 strain and enterohemorrhagic O157:H7 strain of Escherichia coli. There are 13 translocations and inversions compared with the E.coli sequences, all involve a segment larger than 5 kb, and most are associated with deletions or acquired DNA sequences, of which several are likely to be bacteriophage-transmitted pathogenicity islands. Furthermore, S.flexneri, resembling another human-restricted enteric pathogen, Salmonella typhi, also has hundreds of pseudogenes compared with the E.coli strains. All of these could be subjected to investigations towards novel preventative and treatment strategies against shigellosis.