Methods and milliliter scale devices for high-throughput bioprocess design

Based on electromagnetic simulations as well as on computational fluid dynamics simulations gas-inducing impellers and their magnetic inductive drive were optimized for stirred-tank reactors on a 10 ml-scale arranged in a bioreaction block with 48 bioreactors. High impeller speeds of up to 4,000 rpm were achieved at very small electrical power inputs (63 W with 48 bioreactors). The maxima of local energy dissipation in the reaction medium were estimated to be up to 50 W L⁻¹ at 2,800 rpm. Total power input and local energy dissipation are thus well comparable to standard stirred-tank bioreactors. A prototype fluorescence reader for 8 bioreactors with immobilized fluorometric sensor spots was applied for online measurement of dissolved oxygen concentration making use of the phase detection method. A self-optimizing scheduling software was developed for parallel control of 48 bioreactors with a liquid-handling system for automation of titration and sampling. It was shown on the examples of simple parallel batch cultivations of Escherichia coli with different media compositions that high cell densities of up to 16.5 g L⁻¹ dry cell mass can be achieved without pH-control within 5 h with a high parallel reproducibility (standard deviation<3.5%, n=48) due to the high oxygen transfer capability of the gas-inducing stirred-tank bioreactors.     

Scale-up impacts on mass transfer and bioremediation of suspended naphthalene particles in bead mill bioreactors

Scale-up effects on mass transfer and bioremediation of suspended naphthalene particles have been studied in 20 and 58L bead mill bioreactors and compared to data generated earlier with a laboratory scaled bioreactor. The bead mill bioreactor performance with respect to naphthalene mass transfer rate was dependent on the size and loading of the inert particles, as well as the rotational speed of the roller apparatus. The optimum operating conditions were found to be 15mm glass beads at a loading of 50% (total volume of particles/working volume of bioreactor: v/v%) and a bioreactor rotational speed of 50rpm. The highest naphthalene mass transfer coefficients obtained in the large scale system under these optimum conditions (19.6 and 22.4h(-1) for 20 and 58L vessels, respectively) were higher than those determined previously in a 2.5L bead mill bioreactor (0.7h(-1)). The acute toxicity tests indicated that the bioreactor effluent was less toxic than the untreated naphthalene suspension. Biodegradation rates obtained in these large scale bead mill bioreactors under optimum conditions (36-37.4mgL(-1)h(-1)) were higher than those achieved in the control bioreactors of similar sizes (11.4 and 11.6mgL(-1)h(-1)) but were slower than those previously determined in a 2.5L bead mill bioreactor (59-61.5mgL(-1)h(-1)). The limitation of oxygen in the large scale systems and damage of the bacterial cells due to the crushing effects of the large beads are likely contributing factors in the lower observed biodegradation rates. The optimum conditions with respect to naphthalene mass transfer might not necessarily translate to optimum performance with regard to bioremediation.     

Space bioreactors: their use,their future

The use of bioreactors during space flight is discussed. The major elements of a bioreactor are a culture chamber, sensors, a control unit with feedback, as gas exchange system, a pump, fresh culture medium, and a waste reservoir. Types of bioreactors developed for use in space include the Woodlawn Wanderer 9 apparatus, the Space tissue loss system, rotating wall vessel, dynamic cell culture system and the SBR I. Future development for space bioreactors include improvements for cultivation of mammalian cells and tissue engineering and the transfer of bioreactor technology for earth-bound instruments.     

CFD simulation coupled with population balance equations for aerated stirred bioreactors

Mammalian cells have been widely used to produce therapeutic proteins in stirred bioreactors in suspension culture. Local hydrodynamics can have a great impact on cell proliferation and protein synthesis, but there are few reports on spatial heterogeneity of nutrients, gas bubbles, and mass transfer coefficients. We have employed computational fluid dynamics (CFD) coupled with population balance equations to study local hydrodynamics in a 20 L stirred bioreactor. The flow patterns, energy dissipation rates, gas volume fraction, gas bubble size distribution and local mass transfer coefficient have been displayed throughout the whole bioreactor. Their implications for mammalian cell culture have been discussed. This study provides an insight into rational design and optimum operation conditions in a stirred bioreactor for mammalian cell cultivation.     

High‐throughput miniaturized bioreactors for cell culture process development: Reproducibility,scalability, and control

Decreasing the timeframe for cell culture process development has been a key goal toward accelerating biopharmaceutical development. Advanced Microscale Bioreactors (ambr?) is an automated micro‐bioreactor system with miniature single‐use bioreactors with a 10–15 mL working volume controlled by an automated workstation. This system was compared to conventional bioreactor systems in terms of its performance for the production of a monoclonal antibody in a recombinant Chinese Hamster Ovary cell line. The miniaturized bioreactor system was found to produce cell culture profiles that matched across scales to 3 L, 15 L, and 200 L stirred tank bioreactors. The processes used in this article involve complex feed formulations, perturbations, and strict process control within the design space, which are in‐line with processes used for commercial scale manufacturing of biopharmaceuticals. Changes to important process parameters in ambr? resulted in predictable cell growth, viability and titer changes, which were in good agreement to data from the conventional larger scale bioreactors. ambr? was found to successfully reproduce variations in temperature, dissolved oxygen (DO), and pH conditions similar to the larger bioreactor systems. Additionally, the miniature bioreactors were found to react well to perturbations in pH and DO through adjustments to the Proportional and Integral control loop. The data presented here demonstrates the utility of the ambr? system as a high throughput system for cell culture process development. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:718–727, 2014     

Biodegradation of Trichloroethylene in Continuous-Recycle Expanded-Bed Bioreactors

Experimental bioreactors operated as recirculated closed systems were inoculated with bacterial cultures that utilized methane, propane, and tryptone-yeast extract as aerobic carbon and energy sources and degraded trichloroethylene (TCE). Up to 95% removal of TCE was observed after 5 days of incubation. Uninoculated bioreactors inhibited with 0.5% Formalin and 0.2% sodium azide retained greater than 95% of their TCE after 20 days. Each bioreactor consisted of an expanded-bed column through which the liquid phase was recirculated and a gas recharge column which allowed direct headspace sampling. Pulses of TCE (20 mg/liter) were added to bioreactors, and gas chromatography was used to monitor TCE, propane, methane, and carbon dioxide. Pulsed feeding of methane and propane with air resulted in 1 mol of TCE degraded per 55 mol of substrate utilized. Perturbation studies revealed that pH shifts from 7.2 to 7.5 decreased TCE degradation by 85%. The bioreactors recovered to baseline activities within 1 day after the pH returned to neutrality.     

High cell density cultivation of recombinant yeasts and bacteria under non-pressurized and pressurized conditions in stirred tank bioreactors

This study demonstrates the applicability of pressurized stirred tank bioreactors for oxygen transfer enhancement in aerobic cultivation processes. The specific power input and the reactor pressure was employed as process variable. As model organism Escherichia coli, Arxula adeninivorans, Saccharomyces cerevisiae and Corynebacterium glutamicum were cultivated to high cell densities. By applying specific power inputs of approx. 48kWm(-3) the oxygen transfer rate of a E. coli culture in the non-pressurized stirred tank bioreactor was lifted up to values of 0.51moll(-1)h(-1). When a reactor pressure up to 10bar was applied, the oxygen transfer rate of a pressurized stirred tank bioreactor was lifted up to values of 0.89moll(-1)h(-1). The non-pressurized stirred tank bioreactor was able to support non-oxygen limited growth of cell densities of more than 40gl(-1) cell dry weight (CDW) of E. coli, whereas the pressurized stirred tank bioreactor was able to support non-oxygen limited growth of cell densities up to 225gl(-1) CDW of A. adeninivorans, 89gl(-1) CDW of S. cerevisiae, 226gl(-1) CDW of C. glutamicum and 110gl(-1) CDW of E. coli. Compared to literature data, some of these cell densities are the highest values ever achieved in high cell density cultivation of microorganisms in stirred tank bioreactors. By comparing the specific power inputs as well as the k(L)a values of both systems, it is demonstrated that only the pressure is a scaleable tool for oxygen transfer enhancement in industrial stirred tank bioreactors. Furthermore, it was shown that increased carbon dioxide partial pressures did not remarkably inhibit the growth of the investigated model organisms.     

Advanced microscale bioreactor system: a representative scale-down model for bench-top bioreactors

In recent years, several automated scale-down bioreactor systems have been developed to increase efficiency in cell culture process development. ambr™ is an automated workstation that provides individual monitoring and control of culture dissolved oxygen and pH in single-use, stirred-tank bioreactors at a working volume of 10–15 mL. To evaluate the ambr™ system, we compared the performance of four recombinant Chinese hamster ovary cell lines in a fed-batch process in parallel ambr™, 2-L bench-top bioreactors, and shake flasks. Cultures in ambr™ matched 2-L bioreactors in controlling the environment (temperature, dissolved oxygen, and pH) and in culture performance (growth, viability, glucose, lactate, Na⁺, osmolality, titer, and product quality). However, cultures in shake flasks did not show comparable performance to the ambr™ and 2-L bioreactors.     

Effects of pH amendment on metal working fluid wastewater biological treatment using a defined bacterial consortium

The aim of this study was to determine whether pH amendment of a highly alkaline metal working fluid (MWF) wastewater would improve biological treatment in a bioreactor system following introduction of a bacterial inoculum (comprised of the following strains: Agrobacterium radiobacter, Comamonas testosteroni, Methylobacterium mesophilicum, Microbacterium esteraromaticum, and Microbacterium saperdae). The pH values tested were 6, 7, 8, and 9. Three replicate batch mode bioreactors inoculated with the bacterial inoculum (plus an abiotic control bioreactor) were operated for each of the four pH conditions. After 14 days, the final mean chemical oxygen demand (COD) reduction at pH 9 was 50 +/- 1.4%; at pH 8, 58 +/- 1.4%; pH 7, 65 +/- 1.0%; and pH 6, 75 +/- 2.7% of the initial COD (approximately 10,000 mg L(-1)), respectively. Interestingly, within 5 days, the pH in all inoculated bioreactors progressed toward pH 8. However, all abiotic control bioreactors remained at the pH at which they were amended. The fate of the inoculum, determined by denaturing gradient gel electrophoresis (DGGE) and by cluster analysis of the resulting DGGE profiles, revealed that the inocula survived throughout operation of all pH-amended bioreactors. Length-heterogeneity polymerase chain reaction (PCR) was used to track the population dynamics of individual strains. After 7 days of operation, M. esteraromaticum was the most abundant population in all bioreactors, regardless of pH. From our findings, it appears necessary to adjust the MWF wastewater from pH 9 to between 6 and 7, to achieve optimal biological treatment rates.     

Effect of vapor-phase bioreactor operation on biomass accumulation, distribution, and activity: linking biofilm properties to bioreactor performance

Excess biomass accumulation and activity loss in vapor-phase bioreactors (VPBs) can lead to unreliable long-term operation. In this study, temporal and spatial variations in biomass accumulation, distribution and activity in VPBs treating toluene-contaminated air were monitored over a 96-day period. Two laboratory-scale bioreactors were subjected to a toluene loading rate of 45.8 g/m(3)-h with one VPB operating in a unidirectional (UD) mode and a second identical VPB operating in a directionally switching (DS) mode. In the UD bioreactor, the contaminated air stream was continuously fed to the bottom of the reactor, while, in the DS bioreactor, the direction of the contaminated gas flow was reversed every three days. Overall, the DS system performed better with respect to biomass distribution and microbial activity across the bioreactor, resulting in more stable bioreactor performance. In contrast, most of the biomass accumulation and activity was confined to the front half of the UD bioreactor column which caused high pressure drops, rapid activity loss and eventually toluene breakthrough. A carbon balance reveals that excess biomass accumulated continuously in both bioreactors, and biomass yield coefficients were very similar (0.59 g dry biomass/g toluene for the UD and 0.63 g dry biomass/g toluene for the DS). The viable biomass population remained relatively constant in both bioreactors over the operational period, while the inactive biomass fraction steadily increased over the same time frame. Biodegradation activity determined by the dehydrogenase enzyme activity assay was found to be a function of biomass accumulation and reflected pollutant removal profiles along the columns. In addition, biomass activity correlated well with the toluene-degrading fraction of the total bacterial population.     

Mixing power, external convection, and effectiveness in bioreactors

The phenomena of mixing and mass transfer of substrates to microorganisms greatly affect the biochemical reactions which take place in fermentation processes. The effect that agitation power has on the observable reaction kinetics involved in beer fermentation has been studied in different types of bioreactors, from laboratory to industrial scale. With this aim in mind, an effectiveness factor, eta, is introduced which is defined as the relation between the existing rate of reaction, whichever bioreactor is considered, and the reaction rate in the well-mixed, and therefore presumably homogeneous, bioreactor with no diffusional limits. The limitation to homogeneously supplying nutrient material to the cells produces a decrease in this effectiveness factor, which has been correlated to the energy dissipation rate with a similar slope to that which appears in an existing correlation in the literature between this energy and the mass transfer coefficient. Additionally, a dimensionless reaction-convection number, N(RC), which is a function of the power input per unit volume, is proposed, which has been appropriately employed in correlating the effectiveness factor for the types of processes in which convection may be the key resistance factor. (c) 1996 John Wiley & Sons, Inc.     

A restructured framework for modeling oxygen transfer in two-phase partitioning bioreactors

This communication proposes a mechanistic modification to a recently published method for analyzing oxygen mass transfer in two-phase partitioning bioreactors (Nielsen et al., 2003), and corrects an oversight in that paper. The newly proposed modification replaces the earlier empirical approach, which treated the two liquid phases as a single, homogeneous liquid phase, with a two-phase mass transfer model of greater fundamental rigor. Additionally, newly developed empirical models are presented that predict the mass transfer coefficient of oxygen absorption in both aqueous medium and an organic phase (n-hexadecane) as a function of bioreactor operating conditions. Experimental values and theoretical predictions of mass transfer coefficients in two-phase dispersions, k(L)a(TP), are compared. The revised approach more clearly demonstrates the potential for oxygen mass transfer enhancement by organic phase addition, one of the motivations for employing a distinct second phase in a partitioning bioreactor.     

Towards Self‐Regulated Bioprocessing: A Compact Benchtop Bioreactor System for Monitored and Controlled 3D Cell and Tissue Culture

Bioreactors are crucial tools for the manufacturing of living cell‐based tissue engineered products. However, to reach the market successfully, higher degrees of automation, as well as a decreased footprint still need to be reached. In this study, the use of a benchtop bioreactor for in vitro perfusion culture of scaffold‐based tissue engineering constructs is assessed. A low‐footprint benchtop bioreactor system is designed, comprising a single‐use fluidic components and a bioreactor housing. The bioreactor is operated using an in‐house developed program and the culture environment is monitored by specifically designed sensor ports. A gas‐exchange module is incorporated allowing for heat and mass transfers. Titanium‐based scaffolds are seeded with human periosteum‐derived cells and cultured up to 3 weeks. The benchtop bioreactor constructs are compared to benchmark perfusion systems. Live/Dead stainings, DNA quantifications, glucose consumption, and lactate production assays confirm that the constructs cultured in the benchtop bioreactor grew similarly to the benchmark systems. Manual regulation of the system set points enabled efficient alteration of the culture environment in terms of temperature, pH, and dissolved oxygen. This study provides the necessary basis for the development of low‐footprint, automated, benchtop perfusion bioreactors and enables the implementation of active environment control.     

Quantification of power consumption and oxygen transfer characteristics of a stirred miniature bioreactor for predictive fermentation scale-up

Miniature parallel bioreactors are becoming increasingly important as tools to facilitate rapid bioprocess design. Once the most promising strain and culture conditions have been identified a suitable scale-up basis needs to be established in order that the cell growth rates and product yields achieved in small scale optimization studies are maintained at larger scales. Recently we have reported on the design of a miniature stirred bioreactor system capable of parallel operation [Gill et al. (2008); Biochem Eng J 39:164-176]. In order to enable the predictive scale-up of miniature bioreactor results the current study describes a more detailed investigation of the bioreactor mixing and oxygen mass transfer characteristics and the creation of predictive engineering correlations useful for scale-up studies. A Power number of 3.5 for the miniature turbine impeller was first established based on experimental ungassed power consumption measurements. The variation of the measured gassed to ungassed power ratio, P(g)/P(ug), was then shown to be adequately predicted by existing correlations proposed by Cui et al. [Cui et al. (1996); Chem Eng Sci 51:2631-2636] and Mockel et al. [Mockel et al. (1990); Acta Biotechnol 10:215-224]. A correlation relating the measured oxygen mass transfer coefficient, k(L)a, to the gassed power per unit volume and superficial gas velocity was also established for the miniature bioreactor. Based on these correlations a series of scale-up studies at matched k(L)a (0.06-0.11 s(-1)) and P(g)/V (657-2,960 W m(-3)) were performed for the batch growth of Escherichia coli TOP10 pQR239 using glycerol as a carbon source. Constant k(L)a was shown to be the most reliable basis for predictive scale-up of miniature bioreactor results to conventional laboratory scale. This gave good agreement in both cell growth and oxygen utilization kinetics over the range of k(L)a values investigated. The work described here thus gives further insight into the performance of the miniature bioreactor design and will aid its use as a tool for rapid fermentation process development.     

Development of a single-pass ceramic matrix bioreactor for large-scale mammalian cell culture

A single-pass, plug-flow bioreactor has been developed in which oxygen is supplied to entrapped hybridoma cells via sllicone tubes threaded through the square channels of a macroporous ceramic monolith. Oxygen diffuses from the gas phase, through the silicone tubing, across the open square channel, and into the pores of the ceramic wall where it is consumed by entrapped cells. Advantages of such a reactor include higher product yields, protection of cells from detrimental hydrodynamic effects, no internal moving parts to compromise asepsis, and simplicity of operation. A prototype bioreactor was constructed and operated over a range of residence times. A side-by-side experimental comparison with a conventional recycle bioreactor was performed by inoculating both bioreactors with cells from the same stock culture and feeding medium from the same reservoir. Final antibody titers were 80% higher in the single-pass bioreactor at a residence time of 200 minutes compared with those of the recycle bioreactor at a residence time of 800 minutes. A theoretical analysis of oxygen transport in this bioreactor is developed to highlight important design criteria and operating strategies for scale-up. (c) 1992 John Wiley & Sons, Inc.     

Scale‐up analysis for a CHO cell culture process in large‐scale bioreactors

Bioprocess scale‐up is a fundamental component of process development in the biotechnology industry. When scaling up a mammalian cell culture process, it is important to consider factors such as mixing time, oxygen transfer, and carbon dioxide removal. In this study, cell‐free mixing studies were performed in production scale 5,000‐L bioreactors to evaluate scale‐up issues. Using the current bioreactor configuration, the 5,000‐L bioreactor had a lower oxygen transfer coefficient, longer mixing time, and lower carbon dioxide removal rate than that was observed in bench scale 5‐ and 20‐L bioreactors. The oxygen transfer threshold analysis indicates that the current 5,000‐L configuration can only support a maximum viable cell density of 7 × 10⁶ cells mL^?1. Moreover, experiments using a dual probe technique demonstrated that pH and dissolved oxygen gradients may exist in 5,000‐L bioreactors using the current configuration. Empirical equations were developed to predict mixing time, oxygen transfer coefficient, and carbon dioxide removal rate under different mixing‐related engineering parameters in the 5,000‐L bioreactors. These equations indicate that increasing bottom air sparging rate is more efficient than increasing power input in improving oxygen transfer and carbon dioxide removal. Furthermore, as the liquid volume increases in a production bioreactor operated in fed‐batch mode, bulk mixing becomes a challenge. The mixing studies suggest that the engineering parameters related to bulk mixing and carbon dioxide removal in the 5,000‐L bioreactors may need optimizing to mitigate the risk of different performance upon process scale‐up. Biotechnol. Bioeng. 2009;103: 733–746. © 2009 Wiley Periodicals, Inc.     

Continuous pH monitoring in a perfused bioreactor system using an optical pH sensor

Monitoring and regulating the pH of the solution in a bioprocess is one of the key steps in the success of bioreactor operation. An in-line optical pH sensor, based on the optical absorption properties of phenol red present in the medium, was developed and tested in this work for use in NASA space bioreactors based on a rotating wall-perfused vessel system supporting a baby hamster kidney (BHK-21) cell culture. The sensor was tested over three 30-day and one 124-day cell runs. The pH sensor initially was calibrated and then used during the entire cell culture interval. The pH reported by the sensor was compared to that measured by a fiber optically coupled Shimadzu spectrophotometer and a blood gas analyzer. The maximum standard error of prediction for all the four cell runs for development pH sensor against BGA was +/-0.06 pH unit and for the fiber optically coupled Shimadzu spectrophotometer against the blood gas analyzer was +/-0.05 pH unit. The pH sensor system performed well without need of recalibration for 124 days.     

Large-scale production of monoclonal antibodies in defined serum-free media in airlift bioreactors

Forty- and ninety-liter airlift bioreactors have been used successfully to grow hybridoma cell lines in chemically defined serum-free media. In the airlift bioreactor, hybridoma cell growth and monoclonal antibody productivity are comparable to that obtained by conventional cell culture. At sparging rates of 0.60-1.20 vvh (volume of sparged gas per bioreactor volume per hour), the airlift bioreactor achieves rapid mixing and adequate oxygen mass transfer. Foaming is minimal and inconsequential for serum-free media and media supplemented with 5%-10% fetal bovine serum. The use of serum-free medium facilitates monoclonal antibody purification and enhances the purity of the final MAb product.     

Immobilized cells of recombinant Escherichia coli strain for continuous production of L-aspartic acid

For L-aspartic acid biosynthesis, high production cells of Escherichia coli mutant B-715 and P1 were immobilized in chitosan gel using a technique developed in our laboratory. The immobilization process reduced initial activity of the intact cells, however, the biocatalyst produced was very stabile for long-term use in multi-repeated batch or continuous processes. Temperature influence on the conversion of ammonium fumarate to L-aspartic acid was investigated. In long-term experiments, over 603 hours, the temperature 40 degrees C was found to be the best for both biocatalyst stability and high conversion rate. The optimum substrate concentration was 1.0 M. Continuous production of L-aspartic acid was investigated in three types of column bioreactors characterized by different volumes as well as different high to biocatalyst bed volume rations (Hz/Vz). The highest conversion rate, 99.8%, and the productivity 6 g/g/h (mass of L-aspartic acid per dry mass of cells in biocatalyst per time unit) was achieved in the bioreactor with the highest value Hz/Vz = 3.1, and liquid hour space velocity value of 5.2, defined as the volume of feeding substrate passed per volume of catalyst in bioreactor per one hour.     

Reaction engineering studies of acetone-butanol-ethanol fermentation with Clostridium acetobutylicum

Acetone-butanol-ethanol (ABE) fermentation by Clostridium acetobutylicum has been extensively studied in recent years because the organism is recognized as an excellent butanol producer. A parallel bioreactor system with 48 stirred-tank bioreactors on a 12 mL scale was evaluated for batch cultivations of the strictly anaerobic, butanol-producing C. acetobutylicum ATCC 824. Continuous gassing with nitrogen gas was applied to control anaerobic conditions. Process performances of ABE batch fermentations on a milliliter scale were identical to the liter-scale stirred-tank reactor if reaction conditions were identical on the different scales (e.g., initial medium, pH, temperature, specific evaporation rates, specific power input by the stirrers). The effects of varying initial ammonia concentrations (0.1-4.4 g L(-1) ) were studied in parallel with respect to glucose consumption and butanol production of C. acetobutylicum ATCC 824 as a first application example. The highest butanol yield of 33% (mol mol(-1) ) was observed at initial ammonia concentrations of 0.5 and 1.1 g L(-1) . This is the first report on the successful application of a 48 parallel stirred-tank bioreactor system for reaction engineering studies of strictly anaerobic microorganisms at the milliliter scale.