大肠杆菌色氨酸转运系统多基因敲除对色氨酸生产的影响

大肠杆菌中色氨酸向胞内的转运主要是由mtr、tnaB和aroP 3个基因编码的通透酶进行调控.利用Red重组技术,在mtr单基因敲除菌的基础上,成功构建了mtr.tnaB和mtr.aroP双基因敲除菌以及mtr.tnaB.aroP三基因敲除菌,并通过发酵实验首次考察了色氨酸转运系统多基因缺失对大肠杆菌合成色氨酸的影响.发酵结果表明,mtr.tnaB和mtr.aroP双基因缺失后,色氨酸产量分别达到1.38 g/L和1.27 g/L,与出发菌株相比分别提高了17％和9％,而mtr.tnaB.aroP三基因缺失后,菌体生长受到了明显抑制,发酵后色氨酸产量仅为0.63 g/L.在补料分批发酵实验中,mtr.tnaB双基因敲除菌的色氨酸产量进一步提高至12.2 g/L,与出发菌株相比色氨酸产量提高了27％.     

大肠杆菌乙醇工程菌mglB基因的敲除对混合糖发酵木糖利用效率的影响

为明晰葡萄糖非PTS转运系统相关基因对木糖利用效率的影响,探讨葡萄糖PTS和非PTS转运系统是否对木糖利用存在协同影响,以大肠杆菌工程菌SZ470和SZ470P为出发菌株,通过RED同源重组技术敲除葡萄糖转运基因mglB,构建mglB单缺陷菌SZ470M和ptsG/mglB双缺陷菌SZ470PM。比较四株菌的混合糖(3%葡萄糖+2%木糖)发酵情况以及木糖转运代谢相关基因的转录水平。实验结果表明,SZ470M相较于出发菌株SZ470,其发酵性能无明显变化;SZ470PM的木糖消耗速度为0.37 g/L,乙醇产量为23.25 g/L,转化率为82.6%,相比于出发菌株SZ470P分别提高了32%,9.8%和5.8%。基因转录水平的分析也表明菌株SZ470P和SZ470PM的木糖转运与代谢基因的转录水平上调。综上,ptsG和mglB基因的双敲除对木糖利用效率的提高有协同影响,为促进木质纤维素作为发酵原料时木糖的高效利用提供理论依据。     

北京棒杆菌芳香族氨基酸转运蛋白基因敲除对L-色氨酸积累的影响

[目的]为了减少北京棒杆菌PD-67(Corynebacterium pekinense PD-67)从细胞外吸收色氨酸,降低细胞内色氨酸库的浓度,从而使色氨酸的反馈控制作用减弱,增加胞外L-色氨酸的积累量,构建北京棒杆菌PD-67的芳香族氨基酸转运蛋白基因aroP敲除的菌株,研究aroP基因敲除对菌株L-色氨酸积累的影响.并进一步研究在aroP敲除菌株中表达邻氨基苯甲酸合成酶(AS)基因对L-色氨酸积累的影响.[方法]运用PCR技术扩增aroP基因,与整合质粒连接后,用限制性内切酶法构建带有内部片段缺失的aroP基因的敲除载体.利用同源重组技术,敲除北京棒杆菌PD-67的aroP基因,构建菌株PD-67 ΔaroP,并用带有aroP基因的表达载体对PD-67ΔaroP进行互补验证.采用PCR技术扩增AS基因,与表达载体连接构建重组质粒.将重组质粒转入菌株PD-67ΔaroP,构建工程菌株PD-67 ΔaroP/pXAS.通过摇瓶发酵研究PD-67 AaroP和PD-67 ΔaroP/pXAS的发酵特性.[结果]经PCR验证获得了aroP基因缺陷的菌株.摇瓶发酵结果表明,与出发菌株相比,PD-67ΔaroP的L-色氨酸的积累量提高了65％.酶活分析结果表明,AS基因在菌株PD-67 △aroP中得到表达.AS基因表达使工程菌单位菌体产酸率提高了25.6％.[结论]北京棒杆菌PD-67中芳香族氨基酸转运蛋白基因arop的敲除能够提高胞外L-色氨酸的积累量.在arop基因敲除菌中表达AS基因,可以进一步提高工程菌的产酸率.     

产D-乳酸重组大肠杆菌ptsG基因的敲除及其混合糖同步发酵

为构建能够同时高效利用五碳糖和六碳糖发酵产D-乳酸的重组大肠杆菌工程菌,以能高效利用五碳糖发酵产D-乳酸的大肠杆菌工程菌E.coli JH13为出发菌株,通过Red同源重组技术敲除葡萄糖跨膜转运基因pts G。实验结果表明,pts G缺陷菌株E.coli JH15在10%混合糖(5%葡萄糖和5%木糖)培养基中发酵,可同时利用五碳糖和六碳糖以完成发酵;而对照菌葡萄糖消耗完才利用木糖,发酵结束还有18 g/L木糖残留;JH15乳酸产量为83.04 g/L,相比于对照菌株提高了25.86%;在稻草秸秆水解液中发酵,JH15同时利用葡萄糖、木糖和L-阿拉伯糖,乳酸产量为25.15 g/L,转化率为86.42%。JH15作为能利用混合糖同步发酵产D-乳酸的大肠杆菌工程菌,它的成功构建为利用廉价的木质纤维素水解物为原料发酵生产D-乳酸提供参考依据。     

代谢工程改造大肠杆菌合成丁二酸及发酵罐放大工艺

【背景】Escherichia coli AFP111发酵生产丁二酸时大量副产乙酸,丁二酸得率低。【目的】代谢工程改造EscherichiacoliAFP111,提高丁二酸得率,降低副产物乙酸的生成,建立100 L规模的丁二酸发酵工艺。【方法】一步同源重组敲除乙酸合成途径关键酶基因,改造丁二酸合成途径关键酶启动子实现过表达;单因素优化5L发酵罐培养条件。【结果】敲除乙酸产生途径编码乙酸激酶和磷酸转乙酰酶的基因ackA-pta、苏氨酸脱羧酶和2-酮丁酸甲酸裂解酶的基因tdcDE获得SX02菌株,摇瓶发酵条件下其乙酸产量下降了53.42%,丁二酸得率提高9.85%。在SX02菌株基础上,经启动子改造过表达编码葡萄糖激酶的基因glk后获得菌株SX03,其Glk酶活性提高3.66倍,乙酸产量下降了31.62%,丁二酸得率提高8.28%。SX03菌株发酵生产丁二酸在5 L发酵罐进行放大,其乙酸产量为3.97 g/L,丁二酸得率为1.62 mol/mol葡萄糖,相比出发菌株的乙酸产量下降了75.76%,丁二酸得率提高19.12%。在5L发酵罐上对比研究了中和剂Na2CO3和NaOH混合液替换碱式MgCO3的发酵效果,并优化了发酵pH、搅拌转速和葡萄糖浓度,获得如下最适发酵条件:pH6.8,搅拌转速250r/min,葡萄糖100g/L,发酵结束时乙酸产量为2.24 g/L,丁二酸得率为1.66 mol/mol葡萄糖。中和剂替换优化后乙酸产量下降了20.65%,丁二酸得率提高2.47%。菌株SX03发酵工艺进一步在100 L发酵罐上实现放大,其乙酸产量为1.91 g/L,丁二酸得率为1.30 mol/mol葡萄糖。【结论】通过代谢工程改造的大肠杆菌,其副产物乙酸含量显著下降,丁二酸得率提高,并在5 L和100 L发酵罐上实现了工艺放大,展现出较大的工业化利用潜力。     

大肠杆菌利用木糖发酵产琥珀酸的研究

目的:研究大肠杆菌以木糖为碳源发酵产琥珀酸。方法:首先比较了实验室保藏的7种野生型大肠杆菌利用木糖发酵产琥珀酸的产量和得率,结果:表明野生型菌株琥珀酸对木糖的得率集中在0.34g/g~0.53g/g之间,得率较低,副产物主要为乳酸、乙酸。然后选取其中2株菌(E.coli MG1655与E.coli C-1)进行基因敲除,构建了ldhA和pflB双基因缺失的MLB和CLB菌株,以减少副产物的积累。两阶段摇瓶发酵结果表明,琥珀酸得率从0.40g/g分别提高到了0.89g/g及0.90g/g,而产量分别从4.92g/L、5.58g/L提高到11.52g/L、11.81g/L。结论:通过基因敲除后,大肠杆菌能够利用木糖发酵产琥珀酸,琥珀酸得率可以达到0.90g/g。     

乳糖诱导丙酮酸羧化酶基因在大肠杆菌中的表达及对丁二酸产量的影响

大肠杆菌DC1515是敲除葡萄糖磷酸转移酶(ptsG)、乳酸脱氢酶(ldhA)、丙酮酸甲酸裂解酶(pflA)基因的菌株,具有发酵生产丁二酸的潜力。为进一步提高菌株DC1515的丁二酸生产能力,将枯草芽孢杆菌丙酮酸羧化酶(pyc)基因转入其中。用乳糖代替IPTG诱导pyc表达,确定了最佳乳糖加入时间、乳糖浓度及诱导温度。在此基础上,考察了补加乳糖对丁二酸产量的影响。结果表明:由于ptsG基因缺失,当培养基中葡萄糖浓度达到15g/L时,乳糖诱导作用并不受葡萄糖抑制。优化诱导条件后,pyc过表达菌株的丁二酸产量达15.17g/L,为对照菌株的1.78倍。间歇补加乳糖2次至浓度为1g/L,丁二酸产量可进一步增至17.54g/L。研究结果为以葡萄糖为底物生产丁二酸的过程中乳糖诱导外源基因在大肠杆菌中的表达奠定了基础。乳糖诱导降低了成本,有利于实现丁二酸发酵生产的工业化。     

proC及putP基因的敲除对钝齿棒杆菌产L-精氨酸生理代谢的影响

为了选育精氨酸高产菌株,基于谷氨酸棒杆菌的基因组尺度代谢网络模型的指导,以钝齿棒杆菌(Corynebacterium crenatum)MT-M4为出发菌株,通过基因敲除技术构建了pro C和put P敲除菌株。摇瓶发酵结果表明,pro C敲除菌株精氨酸产量达到9.94g/L,较出发菌株提高了15.90%,葡萄糖转化率提高了26.02%。由于其生长受到明显抑制,因此在发酵液中外源添加24mmol/L的脯氨酸,结果发现其精氨酸产量达到12.22g/L,且菌株恢复生长。put P敲除菌株精氨酸产量达到12.23g/L,较出发菌株提高了42.70%,葡萄糖转化率提高了49.31%。以上结果显示,put P的敲除比pro C的敲除更有利于精氨酸的合成,put P的敲除对菌株的生理代谢基本无影响且无需外添加脯氨酸。     

利用代谢工程改善大肠杆菌的3-脱氢莽草酸生产

3-脱氢莽草酸是芳香族氨基酸合成代谢途径中的一种重要中间产物。除可作为一种高效的抗氧化剂,还可用于合成己二酸、香草醛等一些重要的化工产品,具有重要的应用价值。相关研究证明具有去酪氨酸反馈抑制的3-脱氧-D-阿拉伯庚酮糖-7-磷酸合成酶基因aroFFBR以及转酮醇酶基因tktA可以有效影响3-脱氢莽草酸的过量合成。通过增加aroFFBR和tktA串联过量表达的拷贝数,可使工程菌株在摇瓶发酵条件下3-脱氢莽草酸产量提高2.93倍。通过同源重组无痕基因敲除技术依次敲除出发菌大肠杆菌Escherichia coli AB2834的乳酸、乙酸、乙醇等副产物合成途径中的重要基因ldhA、ackA-pta和adhE,可使工程菌株的3-脱氢莽草酸产量进一步提高,达到了1.83 g/L,是初始出发菌株大肠杆菌E.coli AB2834产量的6.7倍。利用5 L发酵罐进行分批补料发酵,62 h后工程菌株3-脱氢莽草酸产量达到了25.48 g/L。本研究可为构建有应用前景的3-脱氢莽草酸生产菌株提供重要参考。     

产L-苏氨酸重组大肠杆菌的构建和发酵性能

【背景】大肠杆菌由于生长性能优良、遗传背景清晰,常被用作苏氨酸生产菌。【目的】敲除大肠杆菌Escherichia coli THR苏氨酸合成途径的非必需基因,并异源表达苏氨酸合成必需的关键酶,构建一株苏氨酸高产菌株。【方法】利用FLP/FRT重组酶系统,敲除E. coli THR中lysC、pfkB和sstT,同时进行谷氨酸棒杆菌中lysC~(fbr)、thrE和丙酮丁醇梭菌中gapC的重组质粒构建并转化到宿主菌中。【结果】以E. coli THR为出发菌株,敲除其苏氨酸合成途径中表达天冬氨酸激酶Ⅲ (AKⅢ)的基因lysC、磷酸果糖激酶Ⅱ基因pfkB及苏氨酸吸收蛋白表达基因sstT,使菌株积累苏氨酸的产量达到75.64±0.35g/L,比出发菌株增加9.9%。随后异源表达谷氨酸棒杆菌中解除了反馈抑制的天冬氨酸激酶(lysC~(fbr))、苏氨酸分泌转运蛋白(thrE)及丙酮丁醇梭菌中由gapC编码的NADP+依赖型甘油醛-3-磷酸脱氢酶,获得重组菌株E. coli THR6菌株。该菌株积累苏氨酸的产量提高到105.3±0.5 g/L,糖酸转化率提高了43.20%,单位产酸能力提高到5.76 g/g DCW,最大生物量为18.26 g DCW/L。【结论】单独敲除某个基因或改造某个途径不能使苏氨酸大量合成和积累,对多个代谢途径共同改造是构建苏氨酸工程菌的最有效方法。     

Combinatorial pathway analysis for improved L-tyrosine production in Escherichia coli: identification of enzymatic bottlenecks by systematic gene overexpression

Combinatorial overexpression of aromatic amino acid biosynthesis (AAAB) genes in the L-tyrosine producing Escherichia coli strains T1 and T2 was employed to search for AAAB reactions limiting L-tyrosine production. All AAAB genes except aroG and tyrA, which were substituted by their feedback resistant derivatives in the host strains, were cloned and overexpressed. A total of 72 different strains overexpressing various AAAB gene combinations were generated and from those strains with improved phenotype, enzymatic bottlenecks of the AAAB pathway could be inferred. The two major gene overexpression targets for increased L-tyrosine production in E. coli were ydiB and aroK, coding for a shikimate dehydrogenase and a shikimate kinase, respectively, and the combination of ydiB and aroK for overexpression resulted in the best L-tyrosine producing strains in this study, yielding 45% for strain T1 and 26% for strain T2, respectively, higher L-tyrosine titers. Interestingly, overexpression studies with combinations of more than one gene revealed that new gene targets could be identified when overexpessed together with other genes but not alone as single gene overexpression. For example, tyrB encoding the last enzyme of the AAAB pathway, an aromatic amino acid transaminase, improved L-tyrosine production significantly when co-overexpressed together with ydiB or aroK, but not when overexpressed alone. It is also noteworthy that E. coli T1, which generally yielded less L-tyrosine, was amenable to greater improvements than strain T2, i.e. E. coli T1 exhibited generally more space for phenotype improvement.     

Modular engineering of L-tyrosine production in Escherichia coli

Efficient biosynthesis of L-tyrosine from glucose is necessary to make biological production economically viable. To this end, we designed and constructed a modular biosynthetic pathway for L-tyrosine production in E. coli MG1655 by encoding the enzymes for converting erythrose-4-phosphate (E4P) and phosphoenolpyruvate (PEP) to L-tyrosine on two plasmids. Rational engineering to improve L-tyrosine production and to identify pathway bottlenecks was directed by targeted proteomics and metabolite profiling. The bottlenecks in the pathway were relieved by modifications in plasmid copy numbers, promoter strength, gene codon usage, and the placement of genes in operons. One major bottleneck was due to the bifunctional activities of quinate/shikimate dehydrogenase (YdiB), which caused accumulation of the intermediates dehydroquinate (DHQ) and dehydroshikimate (DHS) and the side product quinate; this bottleneck was relieved by replacing YdiB with its paralog AroE, resulting in the production of over 700 mg/liter of shikimate. Another bottleneck in shikimate production, due to low expression of the dehydroquinate synthase (AroB), was alleviated by optimizing the first 15 codons of the gene. Shikimate conversion to L-tyrosine was improved by replacing the shikimate kinase AroK with its isozyme, AroL, which effectively consumed all intermediates formed in the first half of the pathway. Guided by the protein and metabolite measurements, the best producer, consisting of two medium-copy-number, dual-operon plasmids, was optimized to produce >2 g/liter L-tyrosine at 80% of the theoretical yield. This work demonstrates the utility of targeted proteomics and metabolite profiling in pathway construction and optimization, which should be applicable to other metabolic pathways.     

常温常压等离子体诱变选育高产L-异亮氨酸大肠杆菌

旨在选育L-异亮氨酸高产大肠杆菌.以大肠杆菌K12(Met-)为出发菌株,经常温常压等离子体(ARTP)诱变,通过微生物高通量液滴培养系统(MMC)筛选,以α-氨基丁酸(α-AB)抗性为筛选标记,得到一株高产L-异亮氨酸的突变菌株大肠杆菌NXU12,并对其遗传稳定性进行了研究.结果表明,出发菌株大肠杆菌K12(Met-...     

Construction of a tyrP-lac operon fusion strain and its use in the isolation and analysis of mutants derepressed for tyrP expression.

The gene tyrP, which codes for a component of the tyrosine-specific transport system, has been localized on the Escherichia coli K-12 chromosome at min 42. A tyrP-lac operon fusion was constructed and used to isolate mutants that have altered expression from the tyrP promoter. All putative tyrP operator mutations were transferred onto a plasmid vector by recombination in vivo. Restriction enzyme analysis of the resultant plasmids suggests that some of these mutants arose from either an insertion or a deletion of DNA occurring within the region of DNA that contains the tyrP promoter.     

Functional expression of prokaryotic and eukaryotic genes in Escherichia coli for conversion of glucose to p-hydroxystyrene

The chemical monomer p-hydroxystyrene (pHS) is used for producing a number of important industrial polymers from petroleum-based feedstocks. In an alternative approach, the microbial production of pHS can be envisioned by linking together a number of different metabolic pathways, of which those based on using glucose for carbon and energy are currently the most economical. The biological process conserves petroleum when glucose is converted to the aromatic amino acid L-tyrosine, which is deaminated by a tyrosine/phenylalanine ammonia-lyase (PAL/TAL) enzyme to yield p-hydroxycinnamic acid (pHCA). Subsequent decarboxylation of pHCA gives rise to pHS. Bacteria able to efficiently decarboxylate pHCA to pHS using a pHCA decarboxylase (PDC) include Bacillus subtilis, Pseudomonas fluorescens and Lactobacillus plantarum. Both B. subtilis and L. plantarum possess high levels of pHCA-inducible decarboxylase activity and were chosen for further studies. The genes encoding PDC in these organisms were cloned and the pHCA decarboxylase expressed in Escherichia coli strains co-transformed with a plasmid encoding a bifunctional PAL/TAL enzyme from the yeast Rhodotorula glutinis. Production of pHS from glucose was ten-fold greater for the expressed L. plantarum pdc gene (0.11mM), compared to that obtained when the B. subtilis PDC gene (padC) was used. An E. coli strain (WWQ51.1) expressing both tyrosine ammonia-lyase(PAL) and pHCA decarboxylase (pdc), when grown in a 14L fermentor and under phosphate limited conditions, produced 0.4g/L of pHS from glucose. We, therefore, demonstrate pHS production from an inexpensive carbohydrate feedstock by fermentation using a novel metabolic pathway comprising genes from E. coli, L. plantarum and R. glutinis.     

途径工程及Tn5转座子介导突变提高大肠杆菌丙酮酸生产

为了开发丙酮酸高产菌株,以大肠杆菌MG1655为出发菌株,通过基因敲除阻断副产物途径构建了产丙酮酸大肠杆菌工程菌KLPP。进一步利用p UT Mini-Tn5载体进行转座子随机突变,构建了含有7 197个单克隆的突变体文库。使用基于丙酮酸的二硝基苯肼显色法,建立了96孔板-酶标仪快速筛选方法,经过两轮的筛选,成功筛选到了6个突变体菌株,比KLPP丙酮酸产量提高了38%、31%、19%、28%、44%和14%。利用全基因组重测序确定了其转座子插入的位置,进而确定了可能影响丙酮酸产量的基因位点,为后续菌株改造工作奠定了基础。     

产顺,顺-粘康酸细胞工厂的构建与优化

顺,顺-粘康酸是重要的平台化学品。目前,生物合成顺,顺-粘康酸还缺乏高性能菌株,已报道的主要工程菌株不仅需要诱导表达,遗传不稳定,而且发酵培养基组分复杂,不利于大规模工业化生产。构建能利用简单无机盐培养基、遗传稳定且不需要诱导表达的新型工程菌受到人们的关注。本研究在实验室前期构建的产三脱氢莽草酸工程菌株WJ060中,整合合成顺,顺-粘康酸的3个外源基因(aro Z、aro Y、cat A),并且利用3个不同强度的组成型启动子进行组合调控,成功构建了27株顺,顺-粘康酸工程菌,得到的最优工程菌MA30的产量达到1.7 g/L。为了进一步提高顺,顺-粘康酸工程菌的生产能力,利用基因组复制工程构建突变体库,结合高通量筛选方法,经过两轮筛选,成功筛选到了顺,顺-粘康酸产量提高超过8%的大肠杆菌MA30-G2。利用5 L发酵罐进行分批补料发酵,MA30-G2的顺,顺-粘康酸产量达到了11.5 g/L。本研究采用组合调控和高通量筛选相结合的策略不仅促进了顺,顺-粘康酸的生物合成,同时也为其他生物基化学品的生物制造提供了重要参考。     

进化代谢选育高渗透压耐受型产琥珀酸大肠杆菌

在以碳酸钠为酸中和剂的大肠杆菌两阶段发酵产琥珀酸的过程中,由于Na+的积累造成发酵体系中渗透压的提高,严重抑制了琥珀酸的产物浓度。为了增强大肠杆菌对渗透压的耐受性,考察了利用进化代谢方法筛选高渗透压耐受型高产琥珀酸大肠杆菌菌株的可行性。进化代谢系统作为一种菌株突变装置,可以使菌体在连续培养条件下以最大的生长速率生长。以NaCl为渗透压调节剂,通过在连续培养装置中逐步提高NaCl浓度使菌体在高渗透压条件下快速生长,最终得到了一株高渗透压耐受型琥珀酸生产菌株Escherichia coli XB4。以碳酸钠为酸中和剂,在7 L发酵罐中利用Escherichia coli XB4进行两阶段发酵,厌氧培养60 h后,琥珀酸产量达到了69.5 g/L,琥珀酸生产速率达到了1.81 g/(L.h),分别比出发菌株提高了18.6%和20%。