Thermostable phenylalanine dehydrogenase of Thermoactinomyces intermedius: cloning, expression, and sequencing of its gene

The gene encoding the thermostable phenylalanine dehydrogenase [EC 1.4.1.-] of a thermophile, Thermoactinomyces intermedius, was cloned and its complete DNA sequence was determined. The phenylalanine dehydrogenase gene (pdh) consists of 1,098 nucleotides and encodes 366 amino acid residues corresponding to the subunit (Mr 41,000) of the hexameric enzyme. The amino acid sequence deduced from the nucleotide sequence of the pdh gene of T. intermedius was 56.0 and 42.1% homologous to those of the phenylalanine dehydrogenases of Bacillus sphaericus and Sporosarcina ureae, respectively. It shows 47.5% homology to that of the thermostable leucine dehydrogenase from B. stearothermophilus. The pdh gene was highly expressed in E. coli JM109, the amount of phenylalanine dehydrogenase produced amounting up to about 8.3% of that of the total soluble protein. We purified the enzyme to homogeneity from transformant cells in a day, with a 58% recovery.     

Branched-chain amino acid aminotransferase of Escherichia coli: nucleotide sequence of the ilvE gene and the deduced amino acid sequence

The ilvE gene of the Escherichia coli K-12 ilvGEDA operon, which encodes branched-chain amino acid aminotransferase [EC 2.6.1.42], was cloned. The nucleotide sequence of 1.5 kilobase pairs containing the gene was determined. The coding region of the ilvE gene contained 927 nucleotide residues and could encode 309 amino acid residues. The predicted molecular weight, amino acid composition and the sequence of the N-terminal 15 residues agreed with the enzyme data reported previously (Lee-Peng, F.-C., et al. (1979) J. Bacteriol. 139, 339-345). From the deduced amino acid sequence, the secondary structure was predicted.     

Complete nucleotide sequence of a thermophilic alpha-amylase gene: homology between prokaryotic and eukaryotic alpha-amylases at the active sites

The nucleotide sequence of a thermophilic, liquefying alpha-amylase gene cloned from B. stearothermophilus was determined. The NH2-terminal amino acid sequence analysis of the B. stearothermophilus alpha-amylase confirmed that the reading frame of the gene consisted of 1,644 base pairs (548 amino acids). The B. stearothermophilus alpha-amylase had a signal sequence of 34 amino acids, which was cleaved at exactly the same site in E. coli. The mature enzyme contained two cysteine residues, which might play an important role in maintenance of a stable protein conformation. Comparison of the amino acid sequence inferred from the B. stearothermophilus alpha-amylase gene with those inferred from other bacterial liquefying alpha-amylase genes and with the amino acid sequences of eukaryotic alpha-amylases showed three homologous sequences in the enzymatically functional regions.     

Cloning, nucleotide sequence, and expression in Escherichia coli of the Bacillus stearothermophilus peroxidase gene (perA).

The gene encoding a thermostable peroxidase was cloned from the chromosomal DNA of Bacillus stearothermophilus IAM11001 in Escherichia coli. The nucleotide sequence of the 3.1-kilobase EcoRI fragment containing the peroxidase gene (perA) and its flanking region was determined. A 2,193-base-pair open reading frame encoding a peroxidase of 731 amino acid residues (Mr, 82,963) was observed. A Shine-Dalgarno sequence was found 9 base pairs upstream from the translational starting site. The deduced amino acid sequence coincides with those of the amino terminus and four peptides derived from the purified peroxidase of B. stearothermophilus IAM11001. E. coli harboring a recombinant plasmid containing perA produced a large amount of thermostable peroxidase which comigrated on polyacrylamide gel electrophoresis with the B. stearothermophilus peroxidase. The peroxidase of B. stearothermophilus showed 48% homology in the amino acid sequence to the catalase-peroxidase of E. coli.     

Complete nucleotide sequence of a gene coding for heat- and pH-stable alpha-amylase of Bacillus licheniformis: comparison of the amino acid sequences of three bacterial liquefying alpha-amylases deduced from the DNA sequences

The gene coding for the heat-stable and pH-stable alpha-amylase of Bacillus licheniformis 584 (ATCC 27811) was cloned in Escherichia coli and the nucleotide sequence of a DNA fragment of 1,948 base pairs containing the entire amylase gene was determined. As inferred from the DNA sequence, the B. licheniformis alpha-amylase had a signal peptide of 29 amino acid residues and the mature enzyme comprised 483 amino acid residues, giving a molecular weight of 55,200. The amino acid sequence of B. licheniformis alpha-amylase showed 65.4% and 80.3% homology with those of heat-stable Bacillus stearothermophilus alpha-amylase and relatively heat-unstable Bacillus amyloliquefaciens alpha-amylase, respectively. Nevertheless, several regions of the alpha-amylases appeared to be clearly distinct from one another when their hydropathy profiles were compared.     

Expression and nucleotide sequence of the Lactobacillus bulgaricus beta-galactosidase gene cloned in Escherichia coli.

The Lactobacillus bulgaricus beta-galactosidase gene was cloned on a ca. 7-kilobase-pair HindIII fragment in the vector pKK223-3 and expressed in Escherichia coli by using its own promoter. The nucleotide sequence of the gene and approximately 400 bases of 3'- and 5'-flanking sequences was determined. The amino acid sequence of the beta-galactosidase, deduced from the nucleotide sequence of the gene, yielded a monomeric molecular mass of ca. 114 kilodaltons, slightly smaller than the E. coli lacZ and Klebsiella pneumoniae lacZ enzymes but larger than the E. coli evolved (ebgA) beta-galactosidase. The cloned beta-galactosidase was found to be indistinguishable from the native enzyme by several criteria. From amino acid sequence alignments, the L. bulgaricus beta-galactosidase has a 30 to 34% similarity to the E. coli lacZ, E. coli ebgA, and K. pneumoniae lacZ enzymes. There are seven regions of high similarity common to all four of these beta-galactosidases. Also, the putative active-site residues (Glu-461 and Tyr-503 in the E. coli lacZ beta-galactosidase) are conserved in the L. bulgaricus enzyme as well as in the other two beta-galactosidases mentioned above. The conservation of active-site amino acids and the large regions of similarity suggest that all four of these beta-galactosidases evolved from a common ancestral gene. However, these enzymes are quite different from the thermophilic beta-galactosidase encoded by the Bacillus stearothermophilus bgaB gene.     

Cloning and sequencing of the leucine dehydrogenase gene from Bacillus sphaericus IFO 3525 and importance of the C-terminal region for the enzyme activity

The structural gene (leudh) coding for leucine dehydrogenase from Bacillus sphaericus IFO 3525 was cloned into Escherichia coli cells and sequenced. The open reading frame coded for a protein of 39.8 kDa. The deduced amino acid sequence of the leucine dehydrogenase from B. sphaericus showed 76–79% identity with those of leucine dehydrogenases from other sources. About 16% of the amino acid residues of the deduced amino acid sequence were different from the sequence obtained by X-ray analysis of the B. sphaericus enzyme. The recombinant enzyme was purified to homogeneity with a 79% yield. The enzyme was a homooctamer (340 kDa) and showed the activity of 71.7 μmol·min⁻¹·mg⁻¹) of protein. The mutant enzymes, in which more than six amino acid residues were deleted from the C-terminal of the enzyme, showed no activity. The mutant enzyme with deletion of four amino acid residues from the C-terminal of the enzyme was a dimer and showed 4.5% of the activity of the native enzyme. The dimeric enzyme was more unstable than the native enzyme, and the K_m values for -leucine and NAD⁺ increased. These results suggest that the Asn-Ile-Leu-Asn residues of the C-terminal region of the enzyme play an important role in the subunit interaction of the enzyme.     

The amino acid sequence of the tyrosyl-tRNA synthetase from Bacillus stearothermophilus

The primary structure of the tyrosyl-tRNA synthetase (TyrTS) of Bacillus stearothermophilus has been deduced from the nucleotide sequence of the cloned gene and from the amino acid sequence of peptides isolated from the purified enzyme. TyrTS (B. stearothermophilus) has a molecular weight of 47316 and the sequence is 56% homologous with that of TyrTS (Escherichia coli). The binding domain for the substrate intermediate tyrosyl adenylate is located in the N-terminal portion of the polypeptide and is highly conserved in both enzymes. Several lysine residues, which are shielded from acetylation in the TyrTS-tRNATyr complex, are also located in a stretch of highly conserved sequence.     

Molecular cloning and sequencing of the glycogen phosphorylase gene from Escherichia coli

The glgP gene, which codes for glycogen phosphorylase, was cloned from a genomic library of Escherichia coli. The nucleotide sequence of the glgP gene contained a single open reading frame encoding a protein consisting of 790 amino acid residues. The glgP gene product, a polypeptide of Mr 87,000, was confirmed by SDS-polyacrylamide gel electrophoresis. The deduced amino acid sequence showed that homology between glgP of E. coli and rabbit glgP, human glgP, potato glgP, and E. coli malP was 48.6, 48.6, 42.3, and 46.1%, respectively. Within this homologous region, the active site, glycogen storage site, and pyridoxal-5'-phosphate binding site are well conserved. The enzyme activity of glycogen phosphorylase increased after introduction on a multicopy of the glgP gene.     

Cloning and sequencing of the gene coding for alcohol dehydrogenase of Bacillus stearothermophilus and rational shift of the optimum pH.

Using Bacillus subtilis as a host and pTB524 as a vector plasmid, we cloned the thermostable alcohol dehydrogenase (ADH-T) gene (adhT) from Bacillus stearothermophilus NCA1503 and determined its nucleotide sequence. The deduced amino acid sequence (337 amino acids) was compared with the sequences of ADHs from four different origins. The amino acid residues responsible for the catalytic activity of horse liver ADH had been clarified on the basis of three-dimensional structure. Since those catalytic amino acid residues were fairly conserved in ADH-T and other ADHs, ADH-T was inferred to have basically the same proton release system as horse liver ADH. The putative proton release system of ADH-T was elucidated by introducing point mutations at the catalytic amino acid residues, Cys-38 (cysteine at position 38), Thr-40, and His-43, with site-directed mutagenesis. The mutant enzyme Thr-40-Ser (Thr-40 was replaced by serine) showed a little lower level of activity than wild-type ADH-T did. The result indicates that the OH group of serine instead of threonine can also be used for the catalytic activity. To change the pKa value of the putative system, His-43 was replaced by the more basic amino acid arginine. As a result, the optimum pH of the mutant enzyme His-43-Arg was shifted from 7.8 (wild-type enzyme) to 9.0. His-43-Arg exhibited a higher level of activity than wild-type enzyme at the optimum pH.     

Sequence analysis of nutA gene encoding membrane-bound Cl(-)-dependent 5'-nucleotidase of Vibrio parahaemolyticus

The membrane-bound 5'-nucleotidase of Vibrio parahaemolyticus is unique in requiring Cl- for activity. We cloned the nutA gene encoding the 5'-nucleotidase and sequenced it. It contained an open reading frame consisting of 1,680 nucleotides capable of encoding a protein of 560 amino acid residues. The first 21 amino acid residues of the N-terminal portion of this protein seem to be a signal peptide. The rest of the polypeptide (539 residues) is hydrophilic, and its molecular weight was calculated to be 60,008, which is in good agreement with the value of 63 kDa determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis for the 5'-nucleotidase derived from the cloned nutA gene. We tried to determine the amino acid sequence of the N-terminal portion of the purified enzyme. However, the N-terminal residue seemed to be blocked. As this 5'-nucleotidase can be solubilized from membrane vesicles with detergent, it may be a lipoprotein. The amino acid sequence around the possible cleavage site of the 5'-nucleotidase had homology with the sequences of the cleavage sites of the lipoproteins of Escherichia coli and other bacteria. The amino acid sequence had high (about 60%) homology with the sequence of periplasmic 5'-nucleotidase (uridine diphosphate sugar hydrolase, the product of the ushA gene) of E. coli. It also contained regions that showed some homology with the nucleotide binding sites of many nucleotide binding proteins.     

Isolation and characterization of a gene coding for glyceraldehyde-3-phosphate dehydrogenase from Saccharomyces cerevisiae.

A yeast glyceraldehyde-3-phosphate dehydrogenase gene has been isolated from a collection of Escherichia coli transformants containing randomly sheared segments of yeast genomic DNA. Complementary DNA, synthesized from partially purified glyceraldehyde-3-phosphate dehydrogenase messenger RNA, was used as a hybridization probe for cloning this gene. The isolated hybrid plasmid DNA has been mapped with restriction endonucleases and the location of the glyceraldehyde-3-phosphate dehydrogenase gene within the cloned segment of yeast DNA has been established. There are approximately 4.5 kilobase pairs of DNA sequence flanking either side of the glyceraldehyde-3-phosphate dehydrogenase gene in the cloned segment of yeast DNA. The isolated hybrid plasmid DNA has been used to selectively hybridize glyceraldehyde-3-phosphate dehydrogenase messenger RNA from unfractionated yeast poly(adenylic acid)-containing messenger RNA. The nucleotide sequence of a portion of the isolated hybrid plasmid DNA has been determined. This nucleotide sequence encodes 29 amino acids which are at the COOH terminus of the known amino acid sequence of yeast glyceraldehyde-3-phosphate dehydrogenase.     

Aromatic amino acid aminotransferase of Escherichia coli: nucleotide sequence of the tyrB gene

The tyrB gene of E. coli K-12, which encodes aromatic amino acid aminotransferase (EC 2.6.1.57) was cloned. The nucleotide sequence of about 2 kilobase pairs containing the gene was determined. The coding region of the tyrB gene and the deduced amino acid sequence revealed that the aromatic amino acid aminotransferase of E. coli is homologous with the aspartate aminotransferase.     

The dihydrolipoyltransacetylase component of the pyruvate dehydrogenase complex from Azotobacter vinelandii. Molecular cloning and sequence analysis

The gene encoding the dihydrolipoyltransacetylase component (E2) of the pyruvate dehydrogenase complex from Azotobacter vinelandii has been cloned in Escherichia coli. A plasmid containing a 2.8-kbp insert of A. vinelandii chromosomal DNA was obtained and its nucleotide sequence determined. The gene comprises 1911 base pairs, 637 codons excluding the initiation codon GUG and stop codon UGA. It is preceded by the gene encoding the pyruvate dehydrogenase component (E1) of pyruvate dehydrogenase complex and by an intercistronic region of 11 base pairs containing a good ribosome binding site. The gene is followed downstream by a strong terminating sequence. The relative molecular mass (64913), amino acid composition and N-terminal sequence are in good agreement with information obtained from studies on the purified enzyme. Approximately the first half of the gene codes for the lipoyl domain. Three very homologous sequences are present, which are translated in three almost identical units, alternated with non-homologous regions which are very rich in alanyl and prolyl residues. The N-terminus of the catalytic domain is sited at residue 381. Between the lipoyl domain and the catalytic domain, a region of about 50 residues is found containing many charged amino acid residues. This region is characterized as a hinge region and is involved in the binding of the pyruvate dehydrogenase and lipoamide dehydrogenase components. The homology with the dihydrolipoyltransacetylase from E. coli is high: 50% amino acid residues are identical.     

Properties and active center of the thermostable branching enzyme from Bacillus stearothermophilus.

Although the branching enzyme (EC 2.4.1.18) is a member of the alpha-amylase family, the characteristics are not understood. The thermostable branching enzyme gene from Bacillus stearothermophilus TRBE14 was cloned and expressed in Escherichia coli. The branching enzyme was purified to homogeneity, and various enzymatic properties were analyzed by our improved assay method. About 80% of activity was retained when the enzyme was heated at 60 degrees C for 30 min, and the optimum temperature for activity was around 50 degrees C. The enzyme was stable in the range of pH 7.5 to 9.5, and the optimum pH was 7.5. The nucleotide sequence of the gene was determined, and the active center of the enzyme was analyzed by means of site-directed mutagenesis. The catalytic residues were tentatively identified as two Asp residues and a Glu residue by comparison of the amino acid sequences of various branching enzymes from different sources and enzymes of the alpha-amylase family. When the Asp residues and Glu were replaced by Asn and Gln, respectively, the branching enzyme activities disappeared. The results suggested that these three residues are the catalytic residues and that the catalytic mechanism of the branching enzyme is basically identical to that of alpha-amylase. On the basis of these results, four conserved regions including catalytic residues and most of the substrate-binding residues of various branching enzymes are proposed.     

Cloning and nucleotide sequence of the type E staphylococcal enterotoxin gene.

The gene for staphylococcal enterotoxin type E (entE) was cloned from Staphylococcus aureus into plasmid vector pBR322 and introduced into Escherichia coli. A staphylococcal enterotoxin type E-producing E. coli strain was isolated. The complete nucleotide sequence of the cloned structural entE gene and the N-terminal amino acid sequence of mature staphylococcal enterotoxin type E were determined. The entE gene contained 771 base pairs that encoded a protein with a molecular weight of 29,358 which was apparently processed to a mature extracellular form with a molecular weight of 26,425. DNA sequence comparisons indicated that staphylococcal enterotoxins type E and A are closely related. There was 84% nucleotide sequence homology between entE and the gene for staphylococcal enterotoxin type A; these genes encoded protein products that had 214 (83%) homologous amino acid residues (mature forms had 188 [82%] homologous amino acid residues).     

Nucleotide sequence of the malate dehydrogenase gene of Thermus flavus and its mutation directing an increase in enzyme activity

The nucleotide sequence of the malate dehydrogenase (mdh) gene from a thermophilic bacterium, Thermus flavus, was determined. The amino acid sequence of the Thermus malate dehydrogenase resembled that of the porcine heart cytoplasmic enzyme to a certain extent, and Asp-159 and His-187 were identified as possible essential residues for the catalytic function. The mutated mdh gene was also cloned from a spontaneous mutant of T. flavus containing a higher activity of the enzyme. Its mutation point was determined to be a single nucleotide exchange from C to T which caused Thr-190 to be substituted by isoleucine. The mutated enzyme showed resistance to substrate inhibition, an increase in both kcat and Km, and a shift toward a more acid optimum pH for the enzyme reaction.     

Thermostable alanine racemase from Bacillus stearothermophilus: DNA and protein sequence determination and secondary structure prediction

The nucleotide sequence of the alanine racemase (EC 5.1.1.1) gene from a thermophile, Bacillus stearothermophilus, was determined by the dideoxy chain termination method with universal and synthetic site-specific primers. The amino acid sequence of the enzyme predicted from the nucleotide sequence was confirmed by peptide sequence information derived from the N-terminal amino acid residues and several tryptic fragments. The alanine racemase gene consists of 1158 base pairs encoding a protein of 386 amino acid residues; the molecular weight of the apoenzyme is estimated as 43,341. The racemase gene of B. stearothermophilus has a closely similar size (1158 vs 1167 base pairs) to that of the gene of a mesophile, B. subtilis, but shows a higher preference for codons ending in G or C. A comparison of the amino acid sequence with those of Bacillus subtilis and Salmonella typhimurium dadB and alr enzymes revealed overall sequence homologies of 31-54%, including an identical octapeptide bearing the pyridoxal 5'-phosphate binding site. Although the residues common in the four racemases are not continuously arrayed, these constitute distinct domains and their hydropathy profiles are very similar. The secondary structure of B. stearothermophilus alanine racemase was predicted from the results obtained by theoretical analysis and circular dichroism measurement.