Applications of field emission scanning electron microscopy to polymer membrane research

The recent development of ultra-high resolution field emission scanning electron microscopy has opened exciting new opportunities in many scientific and engineering applications at the molecular scale. It overcomes the instrumentation limitations of low resolution in SEM and uncertainty in TEM due to artifacts imposed by sample preparation.Applications of field emission scanning electron microscopy (FESEM) to polymer membrane research such as studies of surface morphology of finely porous membranes and mechanisms of membrane fouling are illustrated with examples. The advantages of the technique, especially the low voltage requirements of FESEM for surface observation, are also discussed in comparison with TEM (replica) and conventional SEM.     

Transmission electron microscopy of tissue prepared for scanning electron microscopy by ethanol-cryofracturing.

Tissue processed for scanning electron microscopy by ethanol-cryofracturing combined with critical point drying was embedded and sectioned for transmission electron microscopy. Study of specimens cut in a plane passing through the fracture edge indicated that preservation of cellular fine structure of fractured cells was excellent. Even at the most peripheral edge of the fracture there was no evidence that movement of cytoplasmic components occurred to distort the original structural organization of fractured cells. Lack of cytoplasmic detail in ethanol-cryofractographs has been due more to the nature of the fracturing of the tissue and to the obscuring effects of the metal coating than to structural deformation at the fracture edge or to limitations in resolving power of the scanning electron microscope used.     

Optimizing parameters for correlative immunogold localization by video-enhanced light microscopy, high-voltage transmission electron microscopy, and field emission scanning electron microscopy

Correlative video-enhanced light microscopy, high-voltage transmission electron microscopy, and low-voltage high resolution scanning electron microscopy were used to examine the binding of colloidal gold-labeled fibrinogen to platelet surfaces. Optimal conditions for the detection of large (18 nm) and small (3 nm) gold particles are described.     

Improved visualization of vertebrate nuclear pore complexes by field emission scanning electron microscopy

Field emission scanning electron microscopy (FESEM) can provide high-resolution three-dimensional surface imaging of many biological structures, including nuclear envelopes and nuclear pore complexes (NPCs). For this purpose, it is important to preserve NPCs as close as possible to their native morphology, embedded in undamaged nuclear membranes. We present optimized methodologies for FESEM imaging in a cell-free reconstitution system and for the direct visualization of mammalian cell nuclei. The use of anchored chromatin templates in the cell-free system is particularly advantageous for imaging fragile intermediates inhibited at early stages of assembly. Our new method for exposing the surface of mammalian nuclei results in an unprecedented quality of NPC images, avoiding detergent-induced and physical damage. These new methodologies pave the way for the combined use of FESEM imaging with biochemical and genetic manipulation, in cell-free systems and in mammalian cells.     

Field emission scanning electron microscopy of plant cells

Summary Two basic specimen preparation protocols that allow field emission scanning electron microscope imaging of intracellular structures in a wide range of plants are described. Both protocols depend on freeze fracturing to reveal areas of interest and selective removal of cytosol. Removal of cytosol was achieved either by macerating fixed tissues in a dilute solution of osmium tetroxide after freeze fracturing or by permeabilizing the membranes in saponin before fixation and subsequent freeze fracturing. Images of a variety of intracellular structures including all the main organelles as well as cytoskeletal components are presented. The permeabilization protocol can be combined with immunogold labelling to identify specific components such as microtubules. High-resolution three-dimensional imaging was combined with immunogold labelling of microtubules and actin cables in cell-free systems. This approach should be especially valuable for the study of dynamic cellular processes (such as cytoplasmic streaming) in live cells when used in conjunction with modern fluorescence microscopical techniques.Abbreviations DMSO dimethylsulfoxide - FESEM field emission scanning electron microscope (-scopy) - MTSB microtubule-stabilizing buffer - PBS phosphate-buffered saline - SEM scanning electron microscope (-scopy) - TEM transmission electron microscope (-scopy)     

High resolution detection of uncoated metaphase chromosomes by means of field emission scanning electron microscopy

HeLa metaphase chromosomes were exammed by means of in lens field emission scanning electron microscopy, which permits high resolution detection of uncoated biological samples. By using uncoated chromosomes as a model for comparison we report evidence of how traditional scanning electron microscopy techniques such as metal coating and conductive methods can generate errors in chromosome structure evaluation, since both give rise to morphological artifacts. By comparing the morphology of uncoated chromosomes obtained by two different isolation procedures, such as that utilized in standard cytogenetics and the polyamine method, we have drawn the following conclusions: (a) the standard cytogenetic method gives rise to a chromosome structure consisting of a flattened network of 10 nm fibers, in which higher order chromatin organization is absent. (b) Chromosomes obtained by the polyamine method show both three-dimensional profile and higher level folding of chromatin fibers, supporting the loop chromosome organization previously suggested by scanning electron microscopy observation of hexylene glycol isolated chromosomes.     

Microbe repelling coated stainless steel analysed by field emission scanning electron microscopy and physicochemical methods

Coating of stainless steel with diamond-like carbon or certain fluoropolymers reduced or almost eliminated adhesion and biofilm growth of Staphylococcus epidermidis, Deinococcus geothermalis, Meiothermus silvanus and Pseudoxanthomonas taiwanensis. These species are known to be pertinent biofilm formers on medical implants or in the wet-end of paper machines. Field emission scanning electron microscopic analysis showed that Staph. epidermidis, D. geothermalis and M. silvanus grew on stainless steel using thread-like organelles for adhesion and biofilm formation. The adhesion threads were fewer in number on fluoropolymer-coated steel than on plain steel and absent when the same strains were grown in liquid culture. Psx. taiwanensis adhered to the same surfaces by a mechanism involving cell ghosts on which the biofilm of live cells grew. Hydrophilic (diamond-like carbon) or hydrophobic (fluoropolymer) coatings reduced the adherence of the four test bacteria on different steels. Selected topographic parameters, including root-mean-square roughness (S (q)), skewness (S (sk)) and surface kurtosis (S (ku)), were analysed by atomic force microscopy. The surfaces that best repelled microbial adhesion of the tested bacteria had higher skewness values than those only slightly repelling. Water contact angle, measured (theta (m)) or roughness corrected (theta (y)), affected the tendency for biofilm growth in a different manner for the four test bacteria.     

Enhanced visualization of microbial biofilms by staining and environmental scanning electron microscopy

Bacterial biofilms, i.e. surface-associated cells covered in hydrated extracellular polymeric substances (EPS), are often studied with high-resolution electron microscopy (EM). However, conventional desiccation and high vacuum EM protocols collapse EPS matrices which, in turn, deform biofilm appearances. Alternatively, wet-mode environmental scanning electron microscopy (ESEM) is performed under a moderate vacuum and without biofilm drying. If completely untreated, however, EPS is not electron dense and thus is not resolved well in ESEM. Therefore, this study was towards adapting several conventional SEM staining protocols for improved resolution of biofilms and EPS using ESEM. Three different biofilm types were used: 1) Pseudomonas aeruginosa unsaturated biofilms cultured on membranes, 2) P. aeruginosa cultured in moist sand, and 3) mixed community biofilms cultured on substrates in an estuary. Working with the first specimen type, a staining protocol using ruthenium red, glutaraldehyde, osmium tetroxide and lysine was optimized for best topographic resolution. A quantitative image analysis tool that maps relief, newly adopted here for studying biofilms, was used to compare micrographs. When the optimized staining and ESEM protocols were applied to moist sand cultures and aquatic biofilms, the smoothening effect that bacterial biofilms have on rough sand, and the roughening that aquatic biofilms impart on initially smooth coupons, were each quantifiable. This study thus provides transferable staining and ESEM imaging protocols suitable for a wide range of biofilms, plus a novel tool for quantifying biofilm image data.     

Visual detection of microencapsulated insecticides with selective staining and scanning electron microscopy

Selective staining with Sudan IV and methylene blue for light microscopy and scanning electron microscopy (SEM) were investigated to determine their potential for detecting and quantifying microencapsulated insecticides. Penncap-M (microencapsulated methyl parathion), Penncapthrin (microencapsulated permethrin), and Dyfonate (microencapsulated fonofos) were selectively stained with Sudan IV but not with methylene blue. Selective staining was not possible for Altosid SF-10 or SR-20 (microencapsulated methoprene) with either stain. Sudan IV enabled detection of some microencapsulated formulations in the digestive content of selected aquatic invertebrates and prepared contaminated pollen samples. Staining intensity with Sudan IV was greatest with acetone but capsular damage was high. A solvent ratio of 50:50 and 20:80 acetone/xylene minimized capsular collapse and maintained good staining intensity. The use of SEM for capsule identification and quantification depended upon the method of sample preparation: the slide smear method was superior to samples prepared by incision or microtomy. SEM was most suitable for investigation of formulations such as methoprene, for which selective staining was not possible. The chemical basis of staining with Sudan IV and potential application of both identification techniques are discussed.     

Topographic examination of sister chromatid differential staining by nomarski interference microscopy and scanning electron microscopy

BrdU-substituted Chinese hamster chromosomes were treated with a hot Na₂HPO₄ solution and stained with Giemsa to produce sister chromatid differential staining (SCD). The process of SCD was examined with the Nomarski differential interference microscope and the scanning electron microscope. After the Na₂HPO₄ treatment alone, unifilarly BrdU-substituted (TB) chromatids appeared somewhat more severely collapsed than the bifilarly substituted (BB) chromatids. Subsequent Giemsa staining, however, brought about pronounced piling up of the Giemsa dye on the TB-chromatids but not on the BB-ones, causing highly distinct differential Giemsa staining as well as a marked differentiation in surface topography between the sister chromatids. Removal of the Giemsa dye from the differentially Giemsa stained chromosomes resulted in a disappearance of such a pronounced topographic differentiation.     

Adhesion of intermediate filaments and lipid droplets in adrenal cells studied by field emission scanning electron microscopy

High-resolution field emission scanning electron microscopy was used to study the organisation of intermediate filaments around lipid droplets and their binding to these droplets, in primary culture of bovine adrenal cells. Whole-mount preparations of intermediate filaments and bound lipid droplets were prepared from cells grown on Formvar-coated grids and processed by freeze-drying. Intermediate filaments were seen as an interconnected network enveloping the entire droplet. The bound filaments appear to be directly adherent to the surface of the droplet and hence take on its curved contour. The binding of the filaments to the droplets was determined by means of tilting. This study provides a new approach to investigate the cytoskeleton and its associated structures with high-resolution three-dimensional images.     

Effective diameters of protein A-gold and goat anti-rabbit-gold conjugates visualized by field emission scanning electron microscopy.

High-voltage (15-30 kV) field emission scanning electron microscopy (FESEM) was used to evaluate the effects of gold particle size and protein concentration on the formation of protein-gold complexes. Six colloidal gold sols were prepared, ranging in diameter from 7.6 to 39.8 nm. The minimal protecting amounts (m.p.a.) of protein A and goat anti-rabbit antibody (GAR) were experimentally determined. Gold particles were conjugated at the m.p.a., one half the m.p.a., and ten times the m.p.a. for both proteins, and protein-gold complexes prepared for FESEM. The smallest colloidal gold particles required the most protein per milliliter of gold suspension for stabilization. Transmission electron microscopy was found to be the preferred method for accurate sizing of gold particles, whereas FESEM of protein-gold complexes permitted visualization of a protein halo around a spherical gold core. Protein halo width varied significantly with changes in gold particle size. Measurements of protein halos indicated that conjugation with the m.p.a. of protein A resulted in the thickest protein layers for all gold sizes. GAR conjugation with the m.p.a. again produced the thickest protein layers. However, GAR halos were significantly smaller than those obtained with protein A conjugation. The proteins used showed similar adsorption patterns for the larger gold particles. For smaller gold particles, proteins may act differently, and these complexes should be further characterized by low-voltage FESEM.     

Formation of macromolecular lignin in ginkgo xylem cell walls as observed by field emission scanning electron microscopy

Formation of macromolecular lignin in ginkgo cell walls. In the lignifying process of xylem cell walls, macromolecular lignin is formed by polymerization of monolignols on the pectic substances, hemicellulose and cellulose microfibrils that have deposited prior to the start of lignification. Observation of lignifying secondary cell walls of ginkgo tracheids by field emission scanning electron microscopy suggested that lignin-hemicellulose complexes are formed as tubular bead-like modules surrounding the cellulose microfibrils (CMFs), and that the complexes finally fill up the space between CMFs. The size of one tubular bead-like module in the middle layer of the secondary wall (S2) was tentatively estimated to be about 16+/-2 nm in length, about 25+/-1 nm in outer diameter, with a wall thickness of 4+/-2 nm; the size of the modules in the outer layer of the secondary wall (S1) was larger and they were thicker-walled than that in the middle layer (S2). Aggregates of large globular modules were observed in the cell corner and compound middle lamella. It was suggested that the structure of non-cellulosic polysaccharides and mode of their association with CMFs may be important factors controlling the module formation and lignin concentration in the different morphological regions of the cell wall.     

Microwave processing for scanning electron microscopy

The normal processing of biological samples for Scanning Electron Microscopy, includes treatment with aldehyde (1 to 2 hours), postfixation with Osmium (1 hour), followed by dehydration in a ascending grade of ethanol (30 a 100%), 10 to 15 minutes in each step, and finally drying. This procedure takes at least 8 hours. In this work, samples of mosquitoes (Aedes), protozoa (Tritrichomonas muris), bacteria (Clostridium oceanicum), murine liver, and small intestine were processed in the same manner in a domestic microwave oven for two minutes at 20% of its maximum power. The complete procedure from the initial fixation to dehydration in 100% ethanol was reduced to one hour with good preservation of the ultrastructural details of the specimens.     

Visualization of the cytostome in Trypanosoma cruzi by high resolution field emission scanning electron microscopy using secondary and backscattered electron imaging

High resolution scanning electron microscopy was used to analyze the surface of epimastigote, amastigote and trypomastigote forms of Trypanosoma cruzi. Significant differences were observed between these forms and in different areas of the same cell. The cytostome found in amastigote and epimastigote forms could be easily visualized in images, which resemble those obtained only using the freeze-fracture technique. In contrast to other areas of the cell surface, the region of the cytostome, localized close to the flagellar pocket, showed a rugous surface and an opening with a diameter of 90 nm. Gold-labeled concanavalin A binds to the whole cell surface. However, the extent of binding was much higher in the region of the cytostome. The results obtained show that high resolution scanning electron microscopy is a powerful technique for analyzing the surface of protozoa.     

Serial block-face scanning electron microscopy to reconstruct three-dimensional tissue nanostructure

Three-dimensional (3D) structural information on many length scales is of central importance in biological research. Excellent methods exist to obtain structures of molecules at atomic, organelles at electron microscopic, and tissue at light-microscopic resolution. A gap exists, however, when 3D tissue structure needs to be reconstructed over hundreds of micrometers with a resolution sufficient to follow the thinnest cellular processes and to identify small organelles such as synaptic vesicles. Such 3D data are, however, essential to understand cellular networks that, particularly in the nervous system, need to be completely reconstructed throughout a substantial spatial volume. Here we demonstrate that datasets meeting these requirements can be obtained by automated block-face imaging combined with serial sectioning inside the chamber of a scanning electron microscope. Backscattering contrast is used to visualize the heavy-metal staining of tissue prepared using techniques that are routine for transmission electron microscopy. Low-vacuum (20–60 Pa H₂O) conditions prevent charging of the uncoated block face. The resolution is sufficient to trace even the thinnest axons and to identify synapses. Stacks of several hundred sections, 50–70 nm thick, have been obtained at a lateral position jitter of typically under 10 nm. This opens the possibility of automatically obtaining the electron-microscope-level 3D datasets needed to completely reconstruct the connectivity of neuronal circuits.