Differentiating between isolates of Vibrio vulnificus with monoclonal antibodies

Monoclonal antibodies (MAbs) against Vibrio vulnificus (isolate I, VVC and isolate II, VVB) were raised using heat-killed and heat-killed plus SDS–mercaptoethanol treated forms of VVC and VVB for immunizing Swiss mice. Twenty three hybridomas producing MAbs against V. vulnificus were selected and divided into five groups according to their specificities to different V. vulnificus isolates and apparent protein antigens which ranged from ∼ 3–50 kDa. Four groups were specific to V. vulnificus without cross reactivity to either other Vibrio spp. or other bacterial species. In dot blot based assays, one group of MAbs were specific to VVC, with a sensitivity of ∼ 1.6 × 10⁷ CFU ml^− 1 (∼ 1.6 × 10⁴ cells spot^− 1), and bound to proteins of ∼ 50 and ∼ 39 kDa. Other MAbs, binding to proteins ranging from ∼ 3–14 and ∼ 40 kDa, detected VVB (but not VVC) with high sensitivity at ∼ 1.6 × 10⁵ and 4 × 10⁶ CFU ml^− 1 (∼ 1.6 × 10² and 4 × 10³ cells spot^− 1), respectively. In addition, certain MAbs were able to recognize V. vulnificus in tissues by means of immunohistochemistry. The remaining groups demonstrated cross reactivity to Vibrio fluvialis. MAbs from this study can, therefore, detect the difference between some isolates of V. vulnificus and in addition to pathogen detection may, with further antibodies, form the basis of serovar typing isolates in the future.     

Bioconversion of phenylpyruvic acid to l-phenylalanine by mixed-gel immobilization of Escherichia coli EP8-10

A mixed-gel of κ-carrageenan and gelatin was used in l-phenylalanine production. The mixed-gel, containing 87.5% κ-carrageenan and 12.5% gelatin [the total gel concentration was 4 wt%], showed the best performance and was selected for further study with Escherichia coli EP8-10. The optimum pH and temperature were 8.5 and 37 °C, respectively. The effects of trehalose and Mg²⁺ were studied in the mixed-gel immobilization. Their optimum concentrations were 5 × 10^?2 and 2 × 10^?3 mol/L, respectively. Under the optimal conditions, 98.3% of the phenylpyruvic acid (PPA) was converted to l-phenylalanine. The activity recovery of the transaminase enzyme in the mixed-gel immobilization was higher than that in single κ-carrageenan immobilization, which was 93.6%. The total PPA conversion rate was over 80% in all 15 batches, suggesting great sustainability in the mixed-gel immobilization. The maximum reaction rate (r_max) was calculated to be 4.75 × 10^?2 mol/(L g h).     

Novel 6 MV X-ray photoneutron detection and dosimetry of medical accelerators

PurposeDosimetry of fast, epithermal and thermal photoneutrons in 6 MV X-ray beams of two medical accelerators were studied by novel dosimetry methods.MethodsA Siemens ONCOR and an Elekta COMPACT medical accelerators were used. Fast, epithermal and thermal photoneutron dose equivalents in 10 cm × 10 cm 6 MV X-rays fields were determined in air and on surface of a polyethylene phantom in X and Y directions. Polycarbonate dosimeters as bare or with enriched ¹⁰B convertors (with or without cadmium covers) were used applying a 50 Hz-HV electrochemical etching method.ResultsFast, epithermal and thermal photoneutron dose equivalents were efficiently determined respectively as ∼1145.8, ∼45.3 and ∼170.6 μSv in air and ∼1888.5, ∼96.1 and ∼640.6 μSv on phantom per 100 Gy X-rays at the isocenter of Siemens ONCOR accelerator in air. The dose equivalent is maximum at the isocenter which decreases as distance from it increases reaching a constant level. Tissue-to-air ratios are constants up to 15 cm from the isocenter. No photoneutrons was detected in the Elekta COMPACT accelerator.ConclusionsFast, epithermal and thermal photoneutron dosimetry of 6 MV X-rays were made by novel dosimetry methods in a Siemens ONCOR accelerator with sum dose equivalent per Gy of ∼0.0014% μSv with ∼0.21 MeV mean energy at the isocenter; i.e. ∼150 times smaller than that of 18 MV X-rays. This observation assures clinical safety of 6 MV X-rays in particular in single-mode machines like Elekta COMPACT producing no photoneutrons due to no “beryllium exit window” in the head structure.     

Immobilization of acidic lipase derived from Pseudomonas gessardii onto mesoporous activated carbon for the hydrolysis of olive oil

Mesoporous activated carbon (MAC) derived from rice husk is used for the immobilization of acidic lipase (ALIP) produced from Pseudomonas gessardii. The purified acidic lipase had the specific activity and molecular weight of 1473 U/mg and 94 kDa respectively. To determine the optimum conditions for the immobilization of lipase onto MAC, the experiments were carried out by varying the time (10–180 min), pH (2–8), temperature (10–50 °C) and the initial lipase activity (49 × 10³, 98 × 10³, 147 × 10³ and 196 × 10³ U/l in acetate buffer). The optimum conditions for immobilization of acidic lipase were found to be: time—120 min; pH 3.5; temperature—30 °C, which resulted in achieving a maximum immobilization of 1834 U/g. The thermal stability of the immobilized lipase was comparatively higher than that in its free form. The free and immobilized enzyme kinetic parameters (K_m and V_max) were found using Michaelis–Menten enzyme kinetics. The K_m values for free enzyme and immobilized one were 0.655 and 0.243 mM respectively. The immobilization of acidic lipase onto MAC was confirmed using Fourier Transform-Infrared Spectroscopy, X-ray diffraction analysis and scanning electron microscopy.     

Syntheses,structures, and magnetic properties of heterobimetallic complexes based on tetracyanometallic building blocks

Two tetracyanometalate building blocks, [Fe(5,5′-dmbipy)(CN)₄]^? (2) and [Fe(4,4′-dmbipy)(CN)₄]^? (3) (5,5′-dmbipy = 5,5′-dimethyl-2,2′-bipyridine; 4,4′-dmbipy = 4,4′-dimethyl-2,2′-bipyridine), and two cyano-bridged heterobimetallic complexes, [Cu₂(bpca)₂(H₂O)₂Fe₂(5,5′-dmbipy)₂(CN)₈] · 2[Cu(bpca)Fe(5,5′-dmbipy)(CN)₄] · 4H₂O (4) and [Cu(bpca)Fe(4,4′-dmbipy)(CN)₄]_n (5) (bpca = bis(2-pyridylcarbonyl)amidate), have been synthesized and structurally characterized. Complex 4 contains two dinuclear and one tetranuclear heterobimetallic clusters in an asymmetric unit whereas the structure of complex 5 features a one-dimensional heterobimetallic zigzag chain. The Cu(II) ion is penta-coordinated in the form of a distorted square-based pyramid. Magnetic studies show ferromagnetic coupling between Cu(II) and Fe(III) ions with g = 2.28, J₁ = 2.64 cm^?1, J₂ = 5.40 cm^?1 and TIP = ?2.36 × 10^?3 for complex 4, and g = 2.17, J = 4.82 cm^?1 and zJ′ = 0.029 cm^?1 for complex 5.     

Application of chitosan beads immobilized Rhodococcus sp. NCIM 2891 cholesterol oxidase for cholestenone production

The cell-bound cholesterol oxidase from the Rhodococcus sp. NCIM 2891 was purified three fold by diethylaminoethyl–sepharose chromatography. The estimated molecular mass (SDS-PAGE) and K_m of the enzyme were ∼55.0 kDa and 151 μM, respectively. The purified cholesterol oxidase was immobilized on chitosan beads by glutaraldehyde cross-linking reaction and immobilization was confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy and energy dispersive X-ray analysis. The optimum temperature (45 °C, 5 min) for activity of the enzyme was increased by 5 °C after immobilization. Both the free and immobilized cholesterol oxidases were found to be stable in many organic solvents except for acetone. Fe²⁺ and Pb²⁺ at 0.1 mM of each acted as inhibitors, while Ag⁺, Ca²⁺, Ni²⁺ and Zn²⁺ activated the enzyme at similar concentration. The biotransformation of cholesterol (3.75 mM) with the cholesterol oxidase immobilized beads (3.50 U) leads to ∼88% millimolar yield of cholestenone in a reaction time of 9 h at 25 °C. The immobilized enzyme retains ∼67% activity even after 12 successive batches of operation. The biotransformation method thus, shows a great promise for the production of pharmaceutically important cholestenone.     

Synthesis of urease hybrid nanoflowers and their enhanced catalytic properties

Increasing numbers of materials have been extensively used as platforms for enzyme immobilization to enhance catalytic activity and stability. Although stability of enzyme was accomplished with immobilization approaches, activity of the most of the enzymes was declined after immobilization. Herein, we synthesize the flower shaped-hybrid nanomaterials called hybrid nanoflower (HNF) consisting of urease enzyme and copper ions (Cu²⁺) and report a mechanistic elucidation of enhancement in both activity and stability of the HNF. We demonstrated how experimental factors influence morphology of the HNF. We proved that the HNF (synthesized from 0.02 mg mL⁻¹ urease in 10 mM PBS (pH 7.4) at +4 °C) exhibited the highest catalytic activity of ∼2000% and ∼4000% when stored at +4 °C and RT, respectively compared to free urease. The highest stability was also achieved by this HNF by maintaining 96.3% and 90.28% of its initial activity within storage of 30 days at +4 °C and RT, respectively. This dramatically enhanced activity is attributed to high surface area, nanoscale-entrapped urease and favorable urease conformation of the HNF. The exceptional catalytic activity and stability properties of HNF can be taken advantage of to use it in fields of biomedicine and chemistry.     

Hyptenolide,a new α-pyrone with spasmolytic activity from Hyptis macrostachys

A new α-pyrone was isolated from aerial parts of Hyptis macrostachys Benth. Its structure was determined as 6R-[(5′S,6′S-diacetoxy)-1′Z,3′E-heptenyl]-5,6-dihydro-2H-pyran-2-one, named hyptenolide based on a combination of 1D and 2D NMR techniques and CD data. Hyptenolide inhibited the contractions induced by CCh (IC₅₀ = 1.7 ± 0.3 × 10⁻⁴ M) or histamine (IC₅₀ = 0.9 ± 0.05 × 10⁻⁴ M) in guinea pig ileum, demonstrating for the first time a pharmacological activity for the pyrone.     

A show cave management: Anthropogenic CO2 in atmosphere of Výpustek Cave (Moravian Karst,Czech Republic)

Anthropogenic impact on CO₂ levels was studied in the Bear Chamber of the Výpustek Cave, a show cave in the Moravian Karst (Czech Republic), during a period of active ventilation and enhanced attendance. The study showed that the natural CO₂ levels were controlled by (i) the natural CO₂ influxes from soils/epikarst (up to ∼5.64 × 10⁻² mol s⁻¹); and, (ii) the advective CO₂ fluxes out of cave atmosphere (up to 4.66 × 10⁻² mol s⁻¹). During visitor presence, the anthropogenic CO₂ flux into the chamber reached up to ∼0.13 mol s⁻¹ and exceeded all other CO₂ fluxes. The reachable anthropogenic steady states at sufficient duration of stay (up to 2.65 × 10⁻¹ mol m⁻³) could exceed the natural CO₂ levels by factor of more than nine based on the number of visitors. Recession analysis of anthropogenic pulses showed that intervals between individual visitor groups would have to be up to ∼6 h long if the cave environment has to return to natural conditions. As such pauses between individual tours are hardly realizable, a risk analysis was conducted to find the consequences of breaking natural conditions. It showed that the condition under which dripwater becomes aggressive to calcite (i.e., the point when P_CO2 in cave atmosphere exceeds the hypothetical CO₂ concentrations in epikarst that has participated on the water formation, P_CO2(H) = 10^−1.56) is potentially reachable under extreme conditions only (enormous visitor stay period and visitor number). In case of condensed water, however, any increase in CO₂ concentration will cause an increase of water aggressiveness to calcite. Therefore, in the periods and sites of enhanced condensation, it is important to strive for preservation of natural conditions.     

A biosensor based on gold nanoparticles,dihexadecylphosphate, and tyrosinase for the determination of catechol in natural water

In this work, a biosensor using a glassy carbon electrode modified with gold nanoparticles (AuNPs) and tyrosinase (Tyr) within a dihexadecylphosphate film is proposed. Cystamine and glutaraldehyde crosslinking agents were used as a support for Tyr immobilization. The proposed biosensor was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and cyclic voltammetry in the presence of catechol. The determination of catechol was carried out by amperometry and presented a linear concentration range from 2.5 × 10⁻⁶ to 9.5 × 10⁻⁵ mol L⁻¹ with a detection limit of 1.7 × 10⁻⁷ mol L⁻¹. The developed biosensor showed good repeatability and stability. Moreover, this novel amperometric method was successfully applied in the determination of catechol in natural water samples. The results were in agreement with a 95% confidence level for those obtained using the official spectrophotometric method.     

Subunit unbinding mechanics of dimeric wheat germ agglutinin (WGA) studied by atomic force microscopy

Wheat germ agglutinin (WGA) is an oligomeric lectin widely used as a model of sugar moieties in biochemistry. Subunit association is important for the crosslinking function of WGA, so we used atomic force microscopy to measure the subunit unbinding force of dimeric WGA. We found that the average unbinding force of dimeric WGA is ∼55 pN at ∼1 nN/s loading rate, whereas this unbinding force is increased at least up to 100 pN when WGA is bound to glycophorin A. Moreover, the dissociation rate constant of WGA was calculated to be 1–2 × 10⁻² s⁻¹, suggesting that dimer dissociation is relatively fast.     

Characterization of the diffusion of epidermal growth factor receptor clusters by single particle tracking

A number of studies have shown that receptors of the epidermal growth factor receptor family (ErbBs) exist as higher-order oligomers (clusters) in cell membranes in addition to their monomeric and dimeric forms. Characterizing the lateral diffusion of such clusters may provide insights into their dynamics and help elucidate their functional relevance. To that end, we used single particle tracking to study the diffusion of clusters of the epidermal growth factor (EGF) receptor (EGFR; ErbB1) containing bound fluorescently-labeled ligand, EGF. EGFR clusters had a median diffusivity of 6.8 × 10^–11 cm²/s and were found to exhibit different modes of transport (immobile, simple, confined, and directed) similar to that previously reported for single EGFR molecules. Disruption of actin filaments increased the median diffusivity of EGFR clusters to 10.3 × 10^–11 cm²/s, while preserving the different modes of diffusion. Interestingly, disruption of microtubules rendered EGFR clusters nearly immobile. Our data suggests that microtubules may play an important role in the diffusion of EGFR clusters either directly or perhaps indirectly via other mechanisms. To our knowledge, this is the first report probing the effect of the cytoskeleton on the diffusion of EGFR clusters in the membranes of live cells.     

Effect of ligand congeniality on energy transfer reaction between photo-excited tris(bipyridine)ruthenium(II) and chromate(III) complexes in aqueous solutions

Energy-transfer rate-constants from photo-excited [Ru(N–N)₃]²⁺ (N–N = 2,2′-bipyridine (bpy), 4,4′-dimethyl-2,2′-bipyridine (4dmb), 5,5′-dimethyl-2,2′-bipyridine (5dmb)) to [Cr(O–O)₃]³⁻ (O–O²⁻ = ox²⁻ ((COO⁻)₂), mal²⁻ (CH₂(COO⁻)₂)) and [Cr(CN)₆]³⁻ in encounter complexes were evaluated in aqueous solutions containing alkali metal ion. The rate constant depends on the molecular size of the ruthenium(II) complex: 1.8 × 10⁸ s⁻¹ for [Ru(bpy)₃]²⁺ (molecular radius, r = 5.8 Å), 1.4 × 10⁸ s⁻¹ for [Ru(5dmb)₃]²⁺ (r = 6.1 Å) and 0.96 × 10⁸ s⁻¹ for [Ru(4dmb)₃]²⁺ (r = 6.7 Å) in the system of [Ru(N–N)₃]²⁺–[Cr(ox)₃]³⁻ in aqueous solution. However, the rate constant is much more sensitive to the chromate(III) complex than to ruthenium(II) complex; 1.8 × 10⁸ s⁻¹ and 0.43 × 10⁸ s⁻¹ for [Cr(ox)₃]³⁻ (r = 4.0 Å) and [Cr(mal)₃]³⁻ (r = 4.2 Å) in the [Ru(bpy)₃]²⁺–[Cr(O–O)₃]³⁻ systems, respectively. We conclude that the congeniality between the donor’s and acceptor’s ligands in encounter complex plays an important role in energy transfer in aqueous solution.     

Extended rhodamine photosensitizers for photodynamic therapy of cancer cells

Extended thio- and selenorhodamines with a linear or angular fused benzo group were prepared. The absorption maxima for these compounds fell between 640 and 700 nm. The extended rhodamines were evaluated for their potential as photosensitizers for photodynamic therapy in Colo-26 cells. These compounds were examined for their photophysical properties (absorption, fluorescence, and ability to generate singlet oxygen), for their dark and phototoxicity toward Colo-26 cells, and for their co-localization with mitochondrial-specific agents in Colo-26 and HUT-78 cells. The angular extended rhodamines were effective photosensitizers toward Colo-26 cells with 1.0 J cm⁻² laser light delivered at λ_max ± 2 nm with values of EC₅₀ of (2.8 ± 0.4) × 10⁻⁷ M for sulfur-containing analogue 6-S and (6.4 ± 0.4) × 10⁻⁸ M for selenium-containing analogue 6-Se. The linear extended rhodamines were effective photosensitizers toward Colo-26 cells with 5 and 10 J cm⁻² of broad-band light (EC₅₀’s ⩽ 2.4 × 10⁻⁷ M).     

Amperometric biosensor based on a site-specific immobilization of acetylcholinesterase via affinity bonds on a nanostructured polymer membrane with integrated multiwall carbon nanotubes

Acetylcholinesterase (AChE) was immobilized on chemically modified poly-(acrylonitrile-methyl-methacrylate-sodium vinylsulfonate) membranes in accordance with three different methods, the first of which involved random enzyme immobilization via glutaraldehyde, the second one—site-specific enzyme immobilization via glutaraldehyde and Concanavalin A (Con A) and the third method—modified site-specific enzyme immobilization via glutaraldehyde in the presence of a mixture of multiwall carbon nanotubes and albumin (MWCNs + BSA), glutaraldehyde and Con A. Preliminary tests for the activity of immobilized AChE were carried out using these three methods. The third method was selected as the most efficient one for the immobilization of AChE and the prepared enzyme carriers were used for the construction of amperometric biosensors for the detection of acetylthiocholine (ATCh).A five level three factorial central composite design was chosen to determine the optimal conditions for the enzyme immobilization with three critical variables: concentration of enzyme, Concanavalin A and MWCNs. The design illustrated that the optimum values of the factors influencing the amperometric current were C_E: 70 U mL⁻¹; C_{Con A}: 1.5 mg mL⁻¹ and C_MWCN: 11 mg mL⁻¹, with an amperometric current 0.418 μA. The basic amperometric characteristics of the constructed biosensor were investigated. A calibration plot was obtained for a series of ATCh concentrations ranging from 5 to 400 μM. A linear interval was detected along the calibration curve from 5 to 200 μM. The correlation coefficient for this concentration range was 0.995. The biosensor sensitivity was calculated to be 0.065 μA μM⁻¹ cm⁻². The detection limit with regard to ATCh was calculated to be 0.34 μM. The potential application of the biosensor for detection and quantification of organophosphate pesticides was investigated as well. It was tested against sample solutions of Paraoxon. The biosensor detection limit was determined to be 1.39 × 10⁻¹² g L⁻¹ of Paraoxon, as well as the interval (10⁻¹¹ to 10⁻⁸ g L⁻¹) within which the biosensor response was linearly dependant on the Paraoxon concentration. Finally the storage stability of the enzyme carrier was traced for a period of 120 days. After 30-day storage the sensor retained 76% of its initial current response, after 60 days—68% and after 120 days—61%.     

Semi-interpenetrating polymer networks (semi-IPNs) for entrapment of laccase and their use in Acid Orange 52 decolorization

Laccase enzyme (L) from Trametes versicolor was entrapped in three hydrogel structures namely poly(acrylamide-N-isopropylacrylamide), P(AAm-NIPA), and semi-interpenetrating networks of poly(acrylamide)/alginate, P(AAm)/Alg, and poly(acrylamide-N-isopropylacrylamide)/alginate, P(AAm-NIPA)/Alg. The optimum temperatures for free and all immobilized systems were found to be 40 °C. For free and immobilized laccase systems of P(AAm-NIPA)-L, P(AAm)/Alg-L and P(AAm-NIPA)/Alg-L, K_m values were found to be 6.7 × 10^?3, 8.8 × 10^?2, 5.5 × 10^?2 and 1.8 × 10^?2 mM; V_max values were calculated as 1.8 × 10^?3, 2.5 × 10^?2, 1.5 × 10^?2 and 6.1 × 10^?3 mM min^?1, respectively. For free and the same immobilized systems, the enzymes retained 42%, 91%, 79% and 86% of their initial activities at the end of 56 days of storage. After using the mentioned immobilized systems repeatedly 10 times, they retained 77%, 71% and 84% of their original activities, respectively. For free and the same immobilized systems, decolorization of Acid Orange 52 (AO52) in 6 h were found to be 63%, 50%, 48% and 66%, respectively. Addition of 2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid), ABTS, into the assay medium increased these values up to 73%, 73%, 74% and 75%, respectively.     

Impact of microcarrier coverage on using permittivity for on-line monitoring high adherent Vero cell densities in perfusion bioreactors

The paper presents the interest of on-line permittivity monitoring to estimate the density of Vero cells growing on microcarriers (MCs), even when high cell densities were reached in perfusion bioreactors (4.5 × 10⁶ cells ml⁻¹). Cultures were performed with various MCs concentrations in a reactor equipped with a settling tube. A linear correlation between on-line permittivity and off-line volumetric cell concentration was observed provided that MCs are not fully covered by cells. High permittivities such as 250 pF cm⁻¹ could be measured without signal saturation of the Fogale Biomass system^®. The correlation was no longer linear when cell density per carrier exceeded 100% cell confluency corresponding to 150 cells MC⁻¹ (0.15 × 10⁶ cells cm⁻²). This behaviour was attributed to the decrease of cell volume when cells saturated MCs surface. It mainly happened when low MCs concentration and continuous medium renewing were used. Therefore, permittivity sensor can be considered as a reliable tool to monitor on-line adherent cell densities not exceeding total cell confluency. Moreover, it could be useful to detect when cell confluency occurs.     

Measurement of stray neutron doses inside the treatment room from a proton pencil beam scanning system

PurposeTo measure the environmental doses from stray neutrons in the vicinity of a solid slab phantom as a function of beam energy, field size and modulation width, using the proton pencil beam scanning (PBS) technique.MethodMeasurements were carried out using two extended range WENDI-II rem-counters and three tissue equivalent proportional counters. Detectors were suitably placed at different distances around the RW3 slab phantom. Beam irradiation parameters were varied to cover the clinical ranges of proton beam energies (100–220 MeV), field sizes ((2 × 2)–(20 × 20) cm²) and modulation widths (0–15 cm).ResultsFor pristine proton peak irradiations, large variations of neutron H¹(10)/D were observed with changes in beam energy and field size, while these were less dependent on modulation widths. H¹(10)/D for pristine proton pencil beams varied between 0.04 μSv Gy⁻¹ at beam energy 100 MeV and a (2 × 2) cm² field at 2.25 m distance and 90° angle with respect to the beam axis, and 72.3 μSv Gy⁻¹ at beam energy 200 MeV and a (20 × 20) cm² field at 1 m distance along the beam axis.ConclusionsThe obtained results will be useful in benchmarking Monte Carlo calculations of proton radiotherapy in PBS mode and in estimating the exposure to stray radiation of the patient. Such estimates may be facilitated by the obtained best-fitted simple analytical formulae relating the stray neutron doses at points of interest with beam irradiation parameters.     

Design of a new fluorescent probe: Pyrrole/imidazole hairpin polyamides with pyrene conjugation at their γ-turn

Fluorophores that are conjugated with N-methylpyrrole-N-methylimidazole (Py–Im) polyamides postulates versatile applications in biological and physicochemical studies. Here, we show the design and synthesis of new types of pyrene-conjugated hairpin Py–Im polyamides (1–5). We evaluated the steady state fluorescence of the synthesized conjugates (1–5) in the presence and absence of oligodeoxynucleotides 5′-CGTATGGACTCGG-3′ (ODN 1) and 5′-CCGAGTCCATACG-3′ (ODN 2) and observed a distinct increase in emission at 386 nm with conjugates 4 and 5. Notably, conjugate 5 that contains a β-alanine linker had a stronger binding affinity (K_D = 1.73 × 10^?8 M) than that of conjugate 4 (K_D = 1.74 × 10^?6 M). Our data suggests that Py–Im polyamides containing pyrene fluorophore with a β-alanine linker at the γ-turn NH₂ position can be developed as the competent fluorescent DNA-binding probes.