Application of molecularly imprinted polymers to solid-phase extraction of analytes from real samples

A review is presented of recent developments in the use of molecularly imprinted polymers (MIPs) as selective materials for solid-phase extraction. Compared with traditional sorbents, MIPs can not only concentrate but also selectively separate the target analytes from real samples, which is crucial for the quantitatively determination of analytes in complex samples. Consequently, as one of the most effective sorbents, MIPs have been successfully applied to the pretreatment of analytes in foods, drugs, and biological and environmental samples in the past five years.     

Evaluation of water-compatible molecularly imprinted polymers as solid-phase extraction sorbents for the selective extraction of sildenafil and its desmethyl metabolite from plasma samples

The evaluation of molecularly imprinted polymers (MIPs) as selective sorbents for the solid-phase extraction of sildenafil and its principal metabolite, desmethylsildenafil, was investigated. Two MIPs were synthesised using structural analogues of sildenafil as templates, and a comparison of the performance of the two MIP sorbents in organic and aqueous media was performed. Additionally, the feasibility of applying molecularly imprinted solid-phase extraction (MISPE) to the clean-up of plasma samples containing sildenafil and desmethylsildenafil was investigated. A preliminary, quantitative MISPE for the determination of both compounds in plasma was also performed. The results showed that the MIPs used for the selective extraction of sildenafil gave better compound recovery when aqueous samples were used in comparison to organic-based samples. A preliminary, quantitative MISPE of sildenafil and desmethylsildenafil indicated that the imprinted materials could be used successfully as SPE sorbents for sample pre-treatment for the determination of sildenafil, and related compounds, in plasma.     

Fluorescence anisotropy studies of molecularly imprinted polymers.

A molecularly imprinted polymer (MIP) is a biomimetic material that can be used as a biochemical sensing element. We studied the steady-state and time-resolved fluorescence and fluorescence anisotropy of anthracene-imprinted polyurethane. We compared MIPs with imprinted analytes present, MIPs with the imprinted analytes extracted, MIPs with rebound analytes, non-imprinted control polymers (non-MIPs) and non-MIPs bound with analytes to understand MIP's binding behaviour. MIPs and non-MIPs had similar steady-state fluorescence anisotropy in the range 0.11-0.24. Anthracene rebound in MIPs and non-MIPs had a fluorescence lifetime of tau = 0.64 ns and a rotational correlation time of phi(F) = 1.2-1.5 ns, both of which were shorter than that of MIPs with imprinted analytes present (tau = 2.03 ns and phi(F) = 2.7 ns). The steady-state anisotropy of polymer solutions increased exponentially with polymerization time and might be used to characterize the polymerization extent in situ.     

Synthesis and evaluation of molecularly imprinted polymers for enalapril and lisinopril, two synthetic peptide anti-hypertensive drugs

Molecularly imprinted polymers (MIPs) for the recognition of enalapril and lisinopril were prepared using 4-vinylpyridine as the functional monomer. Following thermal polymerisation the resulting materials were crushed, ground and sieved. First generation MIPs were produced in protic polar porogenic solvents (mixture of methanol (MeOH) and acetonitrile (ACN)). These MIPs were used and validated as sorbents for solid phase extraction and binding assays. Second generation MIPs were produced with polar aprotic porogenic solvent (DMSO). These polymers were packed in HPLC columns in order to investigate their molecular recognition properties in a dynamic mode. The study of the mobile phase composition included two major parameters: organic modifier content and pH value. Retention factors illustrate selective binding of the template from the imprinted polymers, compared to structurally related compounds.     

Molecularly imprinted polymers for the determination of a pharmaceutical development compound in plasma using 96-well MISPE technology

The use of molecularly imprinted polymers (MIPs) as sorbents for the solid phase extraction (SPE) of a pharmaceutical compound in development, prior to quantitative analysis was investigated. Three MIPs were synthesised using a structural analogue as the template molecule. Each polymer was prepared with different monomers and porogens. The MIPs were then tested for their performance both in organic and aqueous environments, the final aim being to load plasma directly onto the polymers. At an early development stage, there is a limited amount of compound available. Due to this limitation, reducing the amount of template required for imprinting was investigated. A MIP capable of extracting the analyte directly from plasma was produced. The specificity of the polymer allowed the method to be validated at a lower sensitivity than a more conventional SPE assay. For the first time, MIPs were packed into 96-well blocks enabling high throughput analysis. The analytical method was fully validated for imprecision and inaccuracy down to 4 ng/ml in plasma.     

MIP-ligand binding assays (pseudo-immunoassays)

Molecular imprint sorbent assays (MIAs) have been applied to an increasing number of analytes of medical and environmental interest: the sensitivities and selectivities of these assays are comparable to immunoassays employing biological antibodies. In a number of cases complete analytical procedures starting from raw samples (blood, plasma and urine) have been demonstrated. There have been significant advances in applying MIPs in new formats and in the use of non-radioisotope labels. Progress in the field is reviewed, with particular emphasis on the technical aspects and new innovations. It is demonstrated that many of the perceived drawbacks of molecular imprinted polymers (MIPs) do not hinder their application in competitive binding assays: Many MIAs have been applied in aqueous systems and a heterogenous distribution of binding sites is not problematic, provided the recognition sites which bind the probe most strongly are selective.     

Isolation and detection of steroids from human urine by molecularly imprinted solid-phase extraction and liquid chromatography

Naturally occurring steroids such as progesterone, testosterone and 17β-estradiol were analyzed in this study. These bio-identical molecules paradoxically can be either beneficial or harmful. Unfortunately as growth promoters can be toxic and cancerogenic at elevated levels. Due to difficulty in monitoring at trace quantities of these hormones in biological matrices specific adsorption materials molecularly imprinted polymers (MIPs) were used for preconcentration and clean up in sample preparation step. A non-covalent imprinting approach was used for bulk polymerization of progesterone, testosterone and 17β-estradiol imprinted polymers. Synthesis of MIPs was achieved by thermal, UV and γ irradiation initiated polymerization whereby were used methacrylic acid (MAA), 4-vinylpyridine (4-VP) as functional monomers, ethylene glycol dimethacrylate (EDMA), trimethylolpropane trimethacrylate (TRIM) as cross-linking agents and acetonitrile, isooctane–toluene (1:99, v/v) and chloroform as porogen solvents. It was also used as initiator 2,2′-azobis(2-methylpropionitrile) (AIBN) or benzyl methyl ether (BME). The MIPs were applied as selective sorbents in solid-phase extraction (SPE). Molecularly imprinted solid-phase extraction (MISPE) considered as hyphenated technique were applied in extraction step before HPLC-DAD analysis of steroids from human urine.     

Separation and screening of compounds of biological origin using molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) represent a new class of materials possessing high selectivity and affinity for the target molecule. Since their discovery in 1972, molecularly imprinted polymers have attracted considerable interest from bio- and chemical laboratories to pharmaceutical institutes. They have been utilized as sensors, catalysts, sorbents for solid-phase extraction, stationary phase for liquid chromatography, mimics of enzymes, receptors and antibodies. Among which, the application of molecularly imprinted polymers for molecular recognition-based separation and screening of compounds has undergone rapid extension and received much attention in recent years. This article mainly focuses on the separation and screening of certain pharmacophoric compounds of interests from biological origin using molecular imprinting technology. Examples of extraction and recognition of active components as anti-tumors or anti-Hepatitis C virus inhibitors from Chinese traditional herbs using molecularly imprinting technology are particularized in this article. Comparison between the screening effect based on MIPs and that based on antibodies is also represented. Consequently the merits and demerits of these two technologies are highlighted.     

Optimization of reversed-phase microcapillary liquid chromatography for quantitative proteomics

A specific capillary electrophoresis-time-of-flight mass spectrometry (CE-TOFMS) method for the determination of serotonin (5HT) and its precursors tryptophan (Trp) and 5-hydroxytryptophan (5HTP) in human platelet rich plasma is described. The analytes were removed from the plasma samples and preconcentrated by solid phase extraction (SPE) on mixed mode cation-exchange sorbents. The SPE recoveries were 71.6 +/- 3.1 for 5HT, 91.0 +/- 2.8 for Trp, and 95.3 +/- 5.9% for 5HTP. Deuterated analogues of 5HT and Trp were used as internal standards for quantitation purposes. Submicromolar detection limits were obtained for standard mixtures of all compounds and their deuterated isotopes, except 5HTP, which had detection limits in the low micromolar range. The potential usefulness of this method in the clinical setting was demonstrated by analyzing plasma extracts from healthy volunteers as well as from pathological samples. While 5HTP was not present in any of the analyzed samples, the levels of 5HT and Trp in both normal and pathological plasma were determined.     

Comparison of monofunctional and multifunctional monomers in phosphate binding molecularly imprinted polymers

In this study, molecularly imprinted polymers (MIPs) prepared using a multifunctional and a monofunctional monomer were compared with respect to their affinities, selectivities, and imprinting efficiencies for organophosphates. This is of interest because multifunctional monomers have higher affinities than traditional monofunctional monomers for their target analytes and thus should yield MIPs with higher affinities and selectivities. However, polymers containing multifunctional monomer may also have a higher number of unselective, non-templated binding sites. This increase in background binding sites could lead to a decrease in the magnitude of the imprinting effect and in the selectivity of the MIP. Therefore, phosphate selective imprinted and non-imprinted polymers (NIPs) were prepared using a novel multifunctional triurea monomer. The binding properties of these polymers were compared with polymers prepared using a monofunctional monourea monomer. The binding affinities and selectivities of the monomers, imprinted polymers, and NIPs were characterized by NMR titration, binding uptake studies, and binding isotherms. MIPs prepared with the triurea monomer showed higher binding affinity and selectivity for the diphenylphosphate anion in organic solvents than the MIPs prepared with the monofunctional monomer. Surprisingly, the binding properties of the NIPs revealed that the polymers prepared using the multifunctional and monofunctional monomers were very similar in affinity and selectivity. Thus, the multifunctional monomers increase not only the affinity of the MIP but also enhance the imprinting effect.     

Molecularly imprinted polymer as storage medium for an analyte

A molecularly imprinted polymer (MIP) able to bind theophylline with a considerable degree of selectivity was prepared through a noncovalent route. The polymer after equilibrating with the template molecule (theophylline) and storage for various periods of time, the amount of theophylline desorbed from the polymer was found to be effectively quantitative indicating that MIPs could be used as a storage matrix for analytes. The stored analyte could be desorbed and analysed conveniently.     

Evaluation and comparison of tailor-made stationary phases based on spherical silica-based beads for capillary electrochromatography via peptide separation analysis

Small cyclic peptides have been employed to elucidate the performance of novel sorbents as stationary phases in capillary electrochromatography (CEC). In this paper chain length dependencies for ordinary liquid chromatographic sorbents are reported together with findings acquired on beads specifically designed to suit CEC. The latter, tailor-made, spherical, porous silica exhibits a distinguished surface modification to meet the criteria anticipated to enhance performance profiles in CEC. With well-characterised peptides resembling the analytes, probing of the CEC system in a systematic manner (predominantly via the organic modifier content of the background electrolyte (BE)) reveals insight into the complex interplay occurring in such analytical systems at the molecular and sub-molecular level in particular upon various modes of interaction.     

Determination of trace 2,4-dinitrophenol in surface water samples based on hydrophilic molecularly imprinted polymers/nickel fiber electrode

A rapid, sensitive and selective electrochemical method was proposed for the determination of 2,4-dinitrophenol (2,4-DNP) in surface water samples, using hydrophilic molecular imprinted polymers (MIPs) as the recognition element and nickel (Ni) fiber as the catalytic element. Hydrophilic MIPs were synthesized using 2,4-DNP as the template, acrylamide as the monomer, glycidilmethacrylate as the pro-hydrophilic co-monomer and acetonitrile as the solvent. Hydrophilic modification could enhance the accessibility of 2,4-DNP to the imprinted cavities and improve the selective recognition properties of traditional MIPs in water medium. Subsequently, hydrophilic MIPs/Ni fiber electrode was prepared to determine trace 2,4-DNP by cyclic voltammetry. The parameters affecting the analytical performance were investigated. Under optimized conditions, the linear range was 0.7-30 μg L?1 and the detection limit was 0.1 μg L?1. Finally, the proposed method was applied to measure 2,4-DNP in surface water samples. The spiked recoveries were changed from 91.3% to 102.6% and the RSD was not higher than 5.1%. There was no statistically significant difference between the results obtained by the proposed method and the traditional chromatographic method.     

Molecularly imprinted polymers in pseudoimmunoassay

Immunoassays are a class of analytical techniques based on the selective affinity of a biological antibody for its antigen. Competitive binding assays, of which the radioimmunoassay (RIA) was the first example, are based on the competition between analyte and a labelled probe for a limited number of binding sites. Molecularly imprinted polymers (MIPs) have been shown to be suitable replacements for biological antibodies in such techniques. Molecularly imprinted sorbent assays (MIAs) similar to RIA have been developed for a range of analytes of clinical and environmental interest. Limits of detection and selectivities of such assays are often similar to those using biological antibodies. Some assays have been used for measurements directly in biological fluids. The field is reviewed and it is shown that some perceived disadvantages of MIPs do not hinder their application in competitive binding assays: many MIAs have been demonstrated in aqueous solvents, and it has been shown that the quantity of template required to prepare imprinted polymers can be drastically reduced, and that binding site heterogeneity is not a problem as long as the sites which bind the probe most strongly are selective. Finally, recent developments including assays in microtitre plates, the use of enzyme-labelled probes, flow-injection assays and a scintillation proximity MIA are discussed.     

Determination of catecholamines and metanephrines in urine by capillary electrophoresis-electrospray ionization-time-of-flight mass spectrometry

A method successfully coupling capillary electrophoretic separation to time-of-flight mass spectrometric (TOFMS) detection for the simultaneous analysis of catecholamines (dopamine, norepinephrine, and epinephrine) and their O-methoxylated metabolites (3-methoxytyramine, normetanephrine, and metanephrine) is described. The inner capillary wall was coated with polyvinyl alcohol in order to obtain baseline resolution of catecholamines and metanephrines and to ensure reproducibility without extensive restorative washing of the capillary. Using electrokinetic injection, detection limits of 0.3 microM for dopamine and norepinephrine, 0.2 microM for 3-methoxytyramine and normetanephrine, and 0.1 microM for epinephrine and metanephrine were achieved with standard solutions. The usefulness of this approach was demonstrated by applying the developed method to the analysis of a spot collection of human urine from a healthy volunteer. The catecholamines and metanephrines were removed from the urine samples and preconcentrated by simultaneous SPE on cation-exchange sorbents. The recoveries of all analytes, with the exception of epinephrine (75%), were over 80%. Catecholamines and metanephrines in the urine samples were quantitated using 3,4-dihydroxybenzylamine as an internal standard. Submicromolar concentrations, consistent with the catecholamine and metanephrine levels reported for normal human urine, were detected.     

Characterization of QCM sensor surfaces coated with molecularly imprinted nanoparticles

Molecularly imprinted polymers (MIPs) are gaining great interest as tailor-made recognition materials for the development of biomimetic sensors. Various approaches have been adopted to interface MIPs with different transducers, including the use of pre-made imprinted particles and the in situ preparation of thin polymer layers directly on transducer surfaces. In this work we functionalized quartz crystal microbalance (QCM) sensor crystals by coating the sensing surfaces with pre-made molecularly imprinted nanoparticles. The nanoparticles were immobilized on the QCM transducers by physical entrapment in a thin poly(ethylene terephthalate) (PET) layer that was spin-coated on the transducer surface. By controlling the deposition conditions, it was possible to gain a high nanoparticle loading in a stable PET layer, allowing the recognition sites in nanoparticles to be easily accessed by the test analytes. In this work, different sensor surfaces were studied by micro-profilometry and atomic force microscopy and the functionality was evaluated using quartz crystal microbalance with dissipation (QCM-D). The molecular recognition capability of the sensors were also confirmed using radioligand binding analysis by testing their response to the presence of the test compounds, (R)- and (S)-propranolol in aqueous buffer.     

Binding cross-reactivity of Boc-phenylalanine enantiomers on molecularly imprinted polymers

A potential problem associated with molecularly imprinted polymer (MIP) sorbents is that of cross-reactivity. In this study three MIPs (imprinted with Boc-L-phenylalanine, Boc-L-alanine, Boc-L-glutamic acid) plus a non-imprinted control were prepared and examined for their ability to bind differentially the enantiomers of boc-protected phenylalanine in an effort to quantify cross-reactivity and to develop a predictive model. Batch rebinding studies showed a degree of predictability for a number of MIP-ligand pairs, but other combinations showed unexpectedly high levels of cross-reactivity. Despite the general acceptance of heterogeneity of MIP binding sites, many previous studies report linear Scatchard plots, which is indicative of binding site homogeneity. The data from this study produced curves, clearly demonstrating heterogeneity. The theoretical and practical implications of this heterogeneity are discussed. Chirality 9:233–237, 1997. © 1997 Wiley-Liss, Inc.     

Plastic antibody for the recognition of chemical warfare agent sulphur mustard

Molecularly imprinted polymers (MIPs) known as plastic antibodies (PAs) represent a new class of materials possessing high selectivity and affinity for the target molecule. Since their discovery, PAs have attracted considerable interest from bio- and chemical laboratories to pharmaceutical institutes. PAs are becoming an important class of synthetic materials mimicking molecular recognition by natural receptors. In addition, they have been utilized as catalysts, sorbents for solid-phase extraction, stationary phase for liquid chromatography and mimics of enzymes. In this paper, first time we report the preparation and characterization of a PA for the recognition of blistering chemical warfare agent sulphur mustard (SM). The SM imprinted PA exhibited more surface area when compared to the control non-imprinted polymer (NIP). In addition, SEM image showed an ordered nano-pattern for the PA of SM that is entirely different from the image of NIP. The imprinting also enhanced SM rebinding ability to the PA when compared to the NIP with an imprinting efficiency () of 1.3.     

Molecular imprinting and solid phase extraction of flavonoid compounds

Molecularly imprinted polymers (MIPs) for quercetin have been successfully prepared by a thermal polymerization method using 4-vinylpyridine (4-VP) and ethylene glycol dimethacrylate (EDMA) as functional monomer and cross-linker, respectively. The obtained molecularly imprinted polymers were evaluated by HPLC using organic eluents, with respect to their selective recognition properties for quercetin and related compounds of the flavonoid class. Two equivalent control polymers, a blank polymer and a polymer imprinted with a structural analogous template, were synthesized, in order to confirm the obtained results. Furthermore, preliminary experiments confirm the applicability of the prepared MIPs for solid phase extraction (SPE), as rapid and facile clean-up of wine samples for HPLC analysis is an envisaged field of application. The successful preparation of molecularly imprinted polymers for flavones provides an innovative opportunity for the development of advanced separation materials, with applications in the field of wine and fermentation analysis.