Genetic dissection of grain traits in Yamadanishiki,an excellent sake-brewing rice cultivar

Key message

The grain traits of Yamadanishiki, an excellent sake-brewing rice cultivar in Japan, are governed by multiple QTLs, namely, a total of 42 QTLs including six major QTLs.

Abstract

Japanese rice wine (sake) is produced using brewing rice (Oryza sativa L.) that carries traits desirable for sake-brewing, such as a larger grain size and higher white-core expression rate (WCE) compared to cooking rice cultivars. However, the genetic basis for these traits in brewing rice cultivars is still unclear. We performed analyses of quantitative trait locus (QTL) of grain and days to heading over 3 years on populations derived from crosses between Koshihikari, a cooking rice, and Yamadanishiki, an excellent sake-brewing rice. A total of 42 QTLs were detected for the grain traits, and the Yamadanishiki alleles at 16 QTLs contributed to larger grain size. Two major QTLs essential for regulating both 100-grain weight (GWt) and grain width (GWh) were harbored in the same regions on chromosomes 5 and 10. An interaction was noted between the environment and the QTL associated with WCE on chromosome 6, which was detected in two of 3 years. In addition, two QTLs for WCE on chromosomes 3 and 10 overlapped with the QTLs for GWt and GWh, suggesting that QTLs associated with grain size also play an important role in the formation of white-core. Despite differences in the rate of grain growth in both Koshihikari and Yamadanishiki across 2 years, the WCE in Yamadanishiki remained consistent, thus demonstrating that the formation of white-core does not depend on grain filling speed. These data can be informative for programs involved in breeding better cooking and brewing rice cultivars.

     

Mapping and validation of quantitative trait loci associated with concentrations of 16 elements in unmilled rice grain

Key Message

QTLs controlling the concentrations elements in rice grain were identified in two mapping populations. The QTLs were clustered such that most genomic regions were associated with more than one element.

Abstract

In this study, quantitative trait loci (QTLs) affecting the concentrations of 16 elements in whole, unmilled rice (Oryza sativa L.) grain were identified. Two rice mapping populations, the ‘Lemont’ × ‘TeQing’ recombinant inbred lines (LT-RILs), and the TeQing-into-Lemont backcross introgression lines (TILs) were used. To increase opportunity to detect and characterize QTLs, the TILs were grown under two contrasting field conditions, flooded and irrigated-but-unflooded. Correlations between the individual elements and between each element with grain shape, plant height, and time of heading were also studied. Transgressive segregation was observed among the LT-RILs for all elements. The 134 QTLs identified as associated with the grain concentrations of individual elements were found clustered into 39 genomic regions, 34 of which were found associated with grain element concentration in more than one population and/or flooding treatment. More QTLs were found significant among flooded TILs (92) than among unflooded TILs (47) or among flooded LT-RILs (40). Twenty-seven of the 40 QTLs identified among the LT-RILs were associated with the same element among the TILs. At least one QTL per element was validated in two or more population/environments. Nearly all of the grain element loci were linked to QTLs affecting additional elements, supporting the concept of element networks within plants. Several of the grain element QTLs co-located with QTLs for grain shape, plant height, and days to heading; but did not always differ for grain elemental concentration as predicted by those traits alone. A number of interesting patterns were found, including a strong Mg–P–K complex.     

Genetic analysis of grain and malt quality in an elite barley population

Quantitative trait loci (QTLs) associated with grain weight, grain width, kernel hardness and malting quality were mapped in a doubled haploid population derived from two elite Australian malting barley varieties, Navigator and Admiral. A total of 30 QTLs for grain weight, grain width and kernel hardness were identified in three environments, and 63 QTLs were identified for ten malting quality traits in two environments. Three malting quality traits, namely β-amylase, diastatic power and apparent attenuation limit, were mainly controlled by a QTL linked to the Bmy1 gene at the distal end of chromosome 4H encoding a β-amylase enzyme. Six other malting quality traits, namely α-amylase, soluble protein, Kolbach index, free amino-acid nitrogen, wort β-glucan and viscosity, had coincident QTL clustered on chromosomes 1HS, 4HS, 7HS and 7HL, which demonstrated the interdependence of these traits. There was a strong association between these malt quality QTL clusters on chromosomes 1HS and 7HL and the major QTL for kernel hardness, suggesting that the use of this trait to enable early selection for malting quality in breeding programs would be feasible. In contrast, the majority of QTLs for hot-water extract were not coincident with those identified for other malt quality traits, which suggested differences in the mechanism controlling this trait. Novel QTLs have been identified for kernel hardness on chromosomes 2HL and 7HL, hot-water extract on 7HL and wort β-glucan on 6HL, and the resulting markers may be useful for marker-assisted selection in breeding programs.     

QTL mapping for some grain traits in bread wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

Grain traits are important agronomic attributes with the market value as well as milling yield of bread wheat. In the present study, quantitative trait loci (QTL) regulating grain traits in wheat were identified. Data for grain area size (GAS), grain width (GWid), factor form density (FFD), grain length-width ratio (GLWR), thousand grain weight (TGW), grain perimeter length (GPL) and grain length (GL) were recorded on a recombinant inbred line derived from the cross of NW1014?×?HUW468 at Meerut and Varanasi locations. A linkage map of 55 simple sequence repeat markers for 8 wheat chromosomes was used for QTL analysis by Composite interval mapping. Eighteen QTLs distributed on 8 chromosomes were identified for seven grain traits. Of these, five QTLs for GLWR were found on chromosomes 1A, 6A, 2B, and 7B, three QTLs for GPL were located on chromosomes 4A, 5A and 7B and three QTLs for GAS were mapped on 5D and 7D. Two QTLs were identified on chromosomes 4A and 5A for GL and two QTLs for GWid were identified on chromosomes 7D and 6A. Similarly, two QTLs for FFD were found on chromosomes 1A and 5D. A solitary QTL for TGW was identified on chromosome 2B. For several traits, QTLs were also co-localized on chromosomes 2B, 4A, 5A, 6A, 5D, 7B and 7D. The QTLs detected in the present study may be validated for specific crosses and then used for marker-assisted selection to improve grain quality in bread wheat.     

QTL mapping of root traits in phosphorus-deficient soils reveals important genomic regions for improving NDVI and grain yield in barley

Key message

Major QTLs for root rhizosheath size are not correlated with grain yield or yield response to phosphorus. Important QTLs were found to improve phosphorus efficiency.

Abstract

Root traits are important for phosphorus (P) acquisition, but they are often difficult to characterize and their breeding values are seldom assessed under field conditions. This has shed doubts on using seedling-based criteria of root traits to select and breed for P efficiency. Eight root traits were assessed under controlled conditions in a barley doubled-haploid population in soils differing in P levels. The population was also phenotyped for grain yield, normalized difference vegetation index (NDVI), grain P uptake and P utilization efficiency at maturity (PutE_GY) under field conditions. Several quantitative traits loci (QTLs) from the root screening and the field trials were co-incident. QTLs for root rhizosheath size and root diameter explained the highest phenotypic variation in comparison to QTLs for other root traits. Shared QTLs were found between root diameter and grain yield, and total root length and PutE_GY. A common major QTL for rhizosheath size and NDVI was mapped to the HvMATE gene marker on chromosome 4H. Collocations between major QTLs for NDVI and grain yield were detected on chromosomes 6H and 7H. When results from BIP and MET were combined, QTLs detected for grain yield were also those QTLs found for NDVI. QTLs qGY5H, qGY6H and qGY7Hb on 7H were robust QTLs in improving P efficiency. A selection of multiple loci may be needed to optimize the breeding outcomes due to the QTL x Environment interaction. We suggest that rhizosheath size alone is not a reliable trait to predict P efficiency or grain yield.

     

Identification of genomic regions that affect grain-mould incidence and other traits of agronomic importance in sorghum

Grain-mould is a major problem in grain sorghum utilization as mouldy grain has a reduced quality due to the deterioration of the endosperm and reduced embryo viability. Here, our objective was to use genome mapping to improve knowledge of genetic variation and co-variation for grain-mould incidence and other inter-related agronomic traits. Grain-mould incidence, kernel-milling hardness, grain density, plant height, panicle peduncle length, foliar-disease incidence, and plant color were measured on 125 F₅ genotypes derived from a cross of Sureño and RTx430. Quantitative trait loci were detected by means of 130 mapped markers (44 microsatellites, 85 AFLPs, one morphological-trait locus) distributed among ten linkage groups covering 970 cM. One to five QTLs affected each trait, with the exception of grain density for which no QTLs were detected. Grain-mould incidence was affected by five QTLs each accounting for between 10 and 23% of the phenotypic variance. The effects and relative positions of QTLs for grain-mould incidence were in accordance with the QTL distribution of several inter-related agronomic traits (e.g., plant height, peduncle length) and with the correlation between these phenotypic traits and grain-mould incidence. The detection of QTLs for grain-mould incidence was dependent on the environment, which is consistent with heritibility estimates that show strong environmental and genotype × environment effects. Several genomic regions affected multiple traits including one region that affected grain-mould incidence, plant height, panicle peduncle length, and grain-milling hardness, and a second region that influenced grain-mould (in four environments) and plant height. One genomic region, which harbors loci for plant color, influenced the severity of foliar disease symptoms and the incidence of grain-mould in one environment. Collectively QTLs detected in the present population explained between 10% and 55% of the phenotypic variance observed for a given trait.     

Molecular dissection of QTL governing grain size traits employing association and linkage mapping in Basmati rice

Grain size is one of the key traits that determines the quality of Basmati rice from the consumers’ as well as the traders’ point of view. Though many genes governing grain size have been identified in indica and japonica, little work has been done in Basmati rice. The present study aims at dissection of a QTL region governing grain size traits in Basmati employing association and linkage mapping approaches. Association mapping revealed that three markers, i.e., RM 6024 (grain breadth), RM1237 and RM18582 (grain length-breadth ratio), which cover 889 kb in the targeted QTL region have been significantly associated with grain size traits. Using linkage mapping, the targeted QTL region has been further delimited to a physical distance of 268 kb that comprises 24 annotated genes. The gene expression analysis of parents, revealed 19 genes differentially expressing within the QTL. Of them, 15 genes showed high expression in Basmati370, while four were expressed in Jaya, and whereas five genes did not show any differential expression between parents. Among differentially expressed genes, a highly expressed gene in Basmati370, Os05g0374200 (Cytokinin dehydrogenase 1 precursor) seems to be involved in accumulation of cytokinins, thus affecting the grain size. Therefore, our findings demonstrated that by complimenting association and linkage mapping, it is likely to dissect a QTL governing grain size traits in Basmati rice and also the QTL could be a potential target for marker-assisted breeding and map-based cloning studies.     

Molecular mapping in tropical maize (Zea mays L.) using microsatellite markers. 2. Quantitative trait loci (QTL) for grain yield, plant height, ear height and grain moisture

A previous genetic map containing 117 microsatellite loci and 400 F(2) plants was used for quantitative trait loci (QTL) mapping in tropical maize. QTL were characterized in a population of 400 F(2:3) lines, derived from selfing the F(2) plants, and were evaluated with two replications in five environments. QTL determinations were made from the mean of these five environments. Grain yield (GY), plant height (PH), ear height (EH) and grain moisture (GM) were measured. Variance components for genotypes (G), environments (E) and GxE interaction were highly significant for all traits. Heritability was 0.69 for GY, 0.66 for PH, 0.67 for EH and 0.23 for GM. Using composite interval mapping (CIM), a total of 13 distinct QTLs were identified: four for GY, four for PH and five for EH. No QTL was detected for GM. The QTL explained 32.73 % of the phenotypic variance of GY, 24.76 % of PH and 20.91 % of EH. The 13 QTLs displayed mostly partial dominance or overdominance gene action and mapped to chromosomes 1, 2, 7, 8 and 9. Most QTL alleles conferring high values for the traits came from line L-14-4B. Mapping analysis identified genomic regions associated with two or more traits in a manner that was consistent with correlation among traits, supporting either pleiotropy or tight linkage among QTL. The low number of QTLs found, can be due to the great variation that exists among tropical environments.     

Conditional QTL mapping of protein content in wheat with respect to grain yield and its components

Grain protein content in wheat (Triticum aestivum L.) is generally considered a highly heritable character that is negatively correlated with grain yield and yield-related traits. Quantitative trait loci (QTL) for protein content was mapped using data on protein content and protein content conditioned on the putatively interrelated traits to evaluate possible genetic interrelationships between protein content and yield, as well as yield-related traits. Phenotypic data were evaluated in a recombinant inbred line population with 302 lines derived from a cross between the Chinese cultivar Weimai 8 and Luohan 2. Inclusive composite interval mapping using IciMapping 3.0 was employed for mapping unconditional and conditional QTL with additives. A strong genetic relationship was found between protein content and grain yield, and yield-related traits. Unconditional QTL mapping analysis detected seven additive QTL for protein content, with additive effects ranging in absolute size from 0.1898% to 0.3407% protein content, jointly accounting for 43.45% of the trait variance. Conditional QTL mapping analysis indicated two QTL independent from yield, which can be used in marker-assisted selection for increasing yield without affecting grain protein content. Three additional QTL with minor effects were identified in the conditional mapping. Of the three QTLs, two were identified when protein content was conditioned on yield, which had pleiotropic effects on those two traits. Conditional QTL mapping can be used to dissect the genetic interrelationship between two traits at the individual QTL level for closely correlated traits. Further, conditional QTL mapping can reveal additional QTL with minor effects that are undetectable in unconditional mapping.     

Relationships between grain protein content and grain yield components through quantitative trait locus analyses in a recombinant inbred line population derived from two elite durum wheat cultivars

Grain protein content (GPC) in durum wheat (Triticum turgidum var. durum) is negatively correlated with grain yield. To evaluate possible genetic interrelationships between GPC and grain yield per spike, thousand-kernel weight and kernel number per spike, quantitative trait loci (QTL) for GPC were mapped using GPC-adjusted data in a covariance analysis on yield components. Phenotypic data were evaluated in a segregating population of 120 recombinant inbred lines derived from crossing the elite cultivars Svevo and Ciccio. The material was tested at five environments in southern Italy. QTL were determined by composite interval mapping based on the Svevo?×?Ciccio linkage map described in Gadaleta et al. (2009) and integrated with DArT markers. The close relationship between GPC and yield components was reflected in the negative correlation between the traits and in the reduction of variance when GPC values were adjusted to yield components. Ten independent genomic regions involved in the expression of GPC were detected, six of which were associated with QTL for one or more grain yield components. QTL alleles with increased GPC effects were associated with QTL alleles with decreased effects on one or more yield component traits, or vice versa (i.e. the allelic effects were in opposite direction). Four QTL for GPC showed always significant effects, and these QTL should represent genes that influence GPC independently from variation in the yield components. Such genes are of special interest in wheat breeding since they would allow an increase in GPC without a concomitant decrease in grain yield.     

Identification of QTL for maize grain yield and kernel-related traits

Grain yield (GY) is one of the most important and complex quantitative traits in maize (Zea mays L.) breeding practice. Quantitative trait loci (QTLs) for GY and three kernel-related traits were detected in a set of recombinant inbred lines (RILs). One hundred and seven simple sequence repeats (SSRs) and 168 insertion/deletion polymorphism markers (Indels) were used to genotype RILs. Eight QTLs were found to be associated with four yield-related traits: GY, 100-kernel weight (HKW), 10-kernel length (KL), and 10-kernel length width (KW). Each QTL explained between 5.96 (qKL2-1) and 13.05 (qKL1-1) per cent of the phenotypic variance. Notably, one common QTL, located at the marker interval between bnlg1893 and chr2-236477 (chromosomal bin 2.09) simultaneously controlled GY and HKW; another common QTL, at bin 2.03 was simultaneously responsible for HKW and KW. Of the QTLs identified, only one pair of significant epistatic interaction involved in chromosomal region at bin 2.03 was detected for HKW; no significant QTL × environment interactions were observed. These results provide the common QTLs and for marker-assisted breeding.     

Molecular genetic analysis of grain protein content and flour whiteness degree using RILs in common wheat

Grain protein content (GPC) and flour whiteness degree (FWD) are important qualitative traits in common wheat. Quantitative trait locus (QTL) mapping for GPC and FWD was conducted using a set of 131 recombinant-inbred lines derived from the cross ‘Chuan 35050 × Shannong 483’ in six environmental conditions. A total of 22 putative QTLs (nine GPC and 13 FWD) were identified on 12 chromosomes with individual QTL explaining 4.5–34.0% phenotypic variation. Nine QTLs (40.9%) were detected in two or more environments. The colocated QTLs were on chromosomes 1B and 4B. Among the QTLs identified for GPC, QGpc.sdau-4A from the parent Shannong 483 represented some important favourable QTL alleles. QGpc.sdau-2A.1 and QFwd.sdau-2A.1 had a significant association with both GPC and FWD. The markers detected on top of QTL regions could be potential targets for marker-assisted selection.     

Mapping QTLs for physiological and biochemical traits related to grain yield under control and terminal heat stress conditions in bread wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

In order to detect genomic regions with different effects for some of the physiological and biochemical traits of wheat, four experiments were conducted at Research Farm of Agricultural and Natural Resources Research Center of Zabol in 2015–2016 and 2016–2017 growing seasons. The experiments were carried out using four alpha lattice designs with two replications under non-stress and terminal heat stress conditions. Plant materials used in this study included 167 recombinant inbred lines and their parents (‘SeriM82’ and ‘Babax’). Six traits including grain yield (GY), proline content (PRO), water soluble carbohydrates (WSC), maximum efficiency of photosystem II (Fv/Fm), cytoplasmic membrane stability (CMS) and chlorophyll content (CHL) were evaluated. Genetic linkage map consisted of 211 AFLP marker, 120 SSR marker and 144 DArT markers with 1864 cm length and 4.4 cm mean distance. QTL analysis was carried out using a mixed-model-based composite interval mapping (MCIM) method. By the combined analysis of normal phenotypic values, 27 additive QTLs and five pairs of epistatic effects were identified for studied traits, among which two additive and one epistatic QTL showed significant QTL?×?environment interactions. By the combined analysis of stress phenotypic values, a total of 26 QTLs with additive effects and 5 epistatic QTLs were detected, among which one additive and one epistatic QTL showed QTL?×?environment interactions. Six QTLs with major effects (QGY-2B, QGY-2D, QPro-5B, QWSC-4A, QFv/Fm-6A and QCMS-4B), which were common between two conditions could be useful for marker-assisted selection (MAS) in order to develop heat tolerant and high-performance wheat varieties.     

Meta-analysis of quantitative trait loci for grain yield and component traits under reproductive-stage drought stress in an upland rice population

A recombinant inbred population developed from a cross between high-yielding lowland rice (Oryza sativa L.) subspecies indica cv. IR64 and upland tropical rice subspecies japonica cv. Cabacu was used to identify quantitative trait loci (QTLs) for grain yield (GY) and component traits under reproductive-stage drought stress. One hundred fifty-four lines were grown in field trials in Indonesia under aerobic conditions by giving surface irrigation to field capacity every 4 days. Water stress was imposed for a period of 15 days during pre-flowering by withholding irrigation at 65 days after seeding. Leaf rolling was scored at the end of the stress period and eight agronomic traits were evaluated after recovery. The population was also evaluated for root pulling force, and a total of 201 single nucleotide polymorphism markers were used to construct the molecular genetic linkage map and QTL mapping. A QTL for GY under drought stress was identified in a region close to the sd1 locus on chromosome 1. QTL meta-analysis across diverse populations showed that this QTL was conserved across genetic backgrounds and co-localized with QTLs for leaf rolling and osmotic adjustment (OA). A QTL for percent seed set and grains per panicle under drought stress was identified on chromosome 8 in the same region as a QTL for OA previously identified in three different populations.     

Molecular detection of QTLs for agronomic and quality traits in a doubled haploid population derived from two Canadian wheats (Triticum aestivum L.)

Development of high-yielding wheat varieties with good end-use quality has always been a major concern for wheat breeders. To genetically dissect quantitative trait loci (QTLs) for yield-related traits such as grain yield, plant height, maturity, lodging, test weight and thousand-grain weight, and for quality traits such as grain and flour protein content, gluten strength as evaluated by mixograph and SDS sedimentation volume, an F₁-derived doubled haploid (DH) population of 185 individuals was developed from a cross between a Canadian wheat variety “AC Karma” and a breeding line 87E03-S2B1. A genetic map was constructed based on 167 marker loci, consisting of 160 microsatellite loci, three HMW glutenin subunit loci: Glu-A1, Glu-B1 and Glu-D1, and four STS-PCR markers. Data for investigated traits were collected from three to four environments in Manitoba, Canada. QTL analyses were performed using composite interval mapping. A total of 50 QTLs were detected, 24 for agronomic traits and 26 for quality-related traits. Many QTLs for correlated traits were mapped in the same genomic regions forming QTL clusters. The largest QTL clusters, consisting of up to nine QTLs, were found on chromosomes 1D and 4D. HMW glutenin subunits at Glu-1 loci had the largest effect on breadmaking quality; however, other genomic regions also contributed genetically to breadmaking quality. QTLs detected in the present study are compared with other QTL analyses in wheat.     

Genetic dissection of sorghum grain quality traits using diverse and segregating populations

Key message

Coordinated association and linkage mapping identified 25 grain quality QTLs in multiple environments, and fine mapping of the Wx locus supports the use of high-density genetic markers in linkage mapping.

Abstract

There is a wide range of end-use products made from cereal grains, and these products often demand different grain characteristics. Fortunately, cereal crop species including sorghum [Sorghum bicolor (L.) Moench] contain high phenotypic variation for traits influencing grain quality. Identifying genetic variants underlying this phenotypic variation allows plant breeders to develop genotypes with grain attributes optimized for their intended usage. Multiple sorghum mapping populations were rigorously phenotyped across two environments (SC Coastal Plain and Central TX) in 2 years for five major grain quality traits: amylose, starch, crude protein, crude fat, and gross energy. Coordinated association and linkage mapping revealed several robust QTLs that make prime targets to improve grain quality for food, feed, and fuel products. Although the amylose QTL interval spanned many megabases, the marker with greatest significance was located just 12 kb from waxy (Wx), the primary gene regulating amylose production in cereal grains. This suggests higher resolution mapping in recombinant inbred line (RIL) populations can be obtained when genotyped at a high marker density. The major QTL for crude fat content, identified in both a RIL population and grain sorghum diversity panel, encompassed the DGAT1 locus, a critical gene involved in maize lipid biosynthesis. Another QTL on chromosome 1 was consistently mapped in both RIL populations for multiple grain quality traits including starch, crude protein, and gross energy. Collectively, these genetic regions offer excellent opportunities to manipulate grain composition and set up future studies for gene validation.

     

Identification of quantitative trait loci for grain size and the contributions of major grain-size QTLs to grain weight in rice

Grain weight, one of the three major components of rice yield, is largely determined by grain size, which is controlled by quantitative trait loci (QTLs). In a previous study, we identified qGS5 as a major QTL for grain width. Here, we report our identification of two more major grain-size QTLs (qGL3 and qGW2a) by using a recombinant inbred line (RIL) population from a cross of two indica varieties, ‘Zhenshan 97’ and ‘SLG’. To investigate the contribution of the three grain-size QTLs to final grain weight, we developed near-isogenic lines (NILs) NIL-qGL3, NIL-qGW2a, and NIL-qGS5 and used these to build the combined QTLs–NIL in the genetic background of ‘Zhenshan 97’ by marker-assisted selection and conventional backcrossing, respectively. A BCF₂ population of 957 individuals was developed from the combined QTLs-NIL for further study of the genetic control of grain size. The QTL analysis revealed that qGW2a and qGL3 played more important roles in grain weight gain than qGS5. All three QTLs showed additive effects with respect to grain weight, with no interaction. These results clearly indicate that pyramiding of major grain-size QTLs is a useful approach for improving rice yield.     

Mapping QTL for grain yield and other agronomic traits in post-rainy sorghum [Sorghum bicolor (L.) Moench]

Sorghum, a cereal of economic importance ensures food and fodder security for millions of rural families in the semi-arid tropics. The objective of the present study was to identify and validate quantitative trait loci (QTL) for grain yield and other agronomic traits using replicated phenotypic data sets from three post-rainy dry sorghum crop seasons involving a mapping population with 245 F₉ recombinant inbred lines derived from a cross of M35-1 × B35. A genetic linkage map was constructed with 237 markers consisting of 174 genomic, 60 genic and 3 morphological markers. The QTL analysis for 11 traits following composite interval mapping identified 91 QTL with 5–12 QTL for each trait. QTL detected in the population individually explained phenotypic variation between 2.5 and 30.3 % for a given trait and six major genomic regions with QTL effect on multiple traits were identified. Stable QTL across seasons were identified. Of the 60 genic markers mapped, 21 were found at QTL peak or tightly linked with QTL. A gene-based marker XnhsbSFCILP67 (Sb03g028240) on SBI-03, encoding indole-3-acetic acid-amido synthetase GH3.5, was found to be involved in QTL for seven traits. The QTL-linked markers identified for 11 agronomic traits may assist in fine mapping, map-based gene isolation and also for improving post-rainy sorghum through marker-assisted breeding.     

Chromosomal loci associated with endosperm hardness in a malting barley cross

A breeding objective for the malting barley industry is to produce lines with softer, plumper grain containing moderate protein content (9–12%) as they are more likely to imbibe water readily and contain more starch per grain, which in turn produces higher levels of malt extract. In a malting barley mapping population, ‘Arapiles’ × ‘Franklin’, the most significant and robust quantitative trait locus (QTL) for endosperm hardness was observed on the short arm of chromosome 1H, across three environments over two growing seasons. This accounted for 22.6% (Horsham 2000), 26.8% (Esperance 2001), and 12.0% (Tarranyurk 2001) of the genetic variance and significantly increased endosperm hardness by 2.06–3.03 SKCS hardness units. Interestingly, Arapiles and Franklin do not vary in Ha locus alleles. Therefore, this region, near the centromere on chromosome 1H, may be of great importance when aiming to manipulate endosperm hardness and malting quality. Interestingly, this region, close to the centromere on chromosome 1H, in our study, aligns with the region of the genome that includes the HvCslF9 and the HvGlb1 genes. Potentially, one or both of these genes could be considered to be candidate genes that influence endosperm hardness in the barley grain. Additional QTLs for endosperm hardness were detected on chromosomes 2H, 3H, 6H and 7H, confirming that the hardness trait in barley is complex and multigenic, similar to many malting quality traits of interest.     

Genetic analysis of grain protein-content,grain yield and thousand-kernel weight in bread wheat

Grain yield and grain protein content are two very important traits in bread wheat. They are controlled by genetic factors, but environmental conditions considerably affect their expression. The aim of this study was to determine the genetic basis of these two traits by analysis of a segregating population of 194 F(7) recombinant inbred lines derived from a cross between two wheat varieties, grown at six locations in France in 1999. A genetic map of 254 loci was constructed, covering about 75% of the bread wheat genome. QTLs were detected for grain protein-content (GPC), yield and thousand-kernel weight (TKW). 'Stable' QTLs (i.e. detected in at least four of the six locations) were identified for grain protein-content on chromosomes 2A, 3A, 4D and 7D, each explaining about 10% of the phenotypic variation of GPC. For yield, only one important QTL was found on chromosome 7D, explaining up to 15.7% of the phenotypic variation. For TKW, three QTLs were detected on chromosomes 2B, 5B and 7A for all environments. No negative relationships between QTLs for yield and GPC were observed. Factorial Regression on GxE interaction allowed determination of some genetic regions involved in the differential reaction of genotypes to specific climatic factors, such as mean temperature and the number of days with a maximum temperature above 25 degrees C during grain filling.