The adsorption of a bacterial cellulase and its two isolated domains to crystalline cellulose.

CenA is a bacterial cellulase (beta-1,4-glucanase) comprised of a globular catalytic domain joined to an extended cellulose-binding domain (CBD) by a short linker peptide. The adsorption of CenA and its two isolated domains to crystalline cellulose was analyzed. CenA and CBD.PTCenA' (the CBD plus linker) adsorbed rapidly to cellulose at 30 degrees C, and no net desorption of protein was observed during the following 16.7 h. There was no detectable adsorption of the catalytic domain. Scatchard plots of adsorption data for CenA and for CBD.PTCenA were nonlinear (concave upward). The adsorption of CenA and CBD.PTCenA exceeded 7 and 8 mumol/g cellulose, respectively, but saturation was not attained at the highest total protein concentrations employed. A new model for adsorption was developed to describe the interaction of a large ligand (protein) with a lattice of overlapping potential binding sites (cellobiose residues). A relative equilibrium association constant (Kr) of 40.5 and 45.3 liter.g cellulose-1 was estimated for CenA and CBD.PTCenA, respectively, according to this model. A similar Kr value (33.3 liter.g-1) was also obtained for Cex, a Cellulomonas fimi enzyme which contains a related CBD but which hydrolyzes both beta 1,4-xylosidic and beta-1,4-glucosidic bonds. It was estimated that the CBD occupies approximately 39 cellobiose residues on the cellulose surface.     

Structural and functional analysis of a bacterial cellulase by proteolysis

CenA is an endo-beta 1,4-glucanase from the cellulolytic bacterium Cellulomonas fimi. It is a bifunctional enzyme comprising an amino-terminal cellulose-binding domain and a carboxyl-terminal catalytic domain joined by a short sequence of prolyl and threonyl residues (the Pro-Thr box). Additional structural and functional information was revealed by a detailed analysis of the products generated by proteolytic cleavage of a nonglycosylated form of CenA. An extracellular C. fimi protease attacked nonglycosylated CenA at the junctions between the Pro-Thr box and the two functional domains. A stable "core" peptide (p30), corresponding to the catalytic domain, remained after extensive proteolysis. p30 was resistant to further attack even in the presence of 2-mercaptoethanol plus urea or dithiothreitol, but treatment in the presence of sodium dodecyl sulfate allowed complete fragmentation to small peptides. Stable peptides, identical, or closely related to p30, were generated by alpha-chymotrypsin or papain. These results indicated that the catalytic domain adopts a tightly folded conformation affording protection from proteolytic attack. In contrast, the cellulose-binding domain showed a relatively loose conformation. Progressive proteolytic truncation from the amino terminus was apparent during incubation with alpha-chymotrypsin or papain, or with C. fimi protease under reducing conditions. Affinity for cellulose was retained by products missing up to 64 amino-terminal amino acids. The remaining carboxyl-proximal region of the cellulose-binding domain with affinity (47 amino acids) contained sequences highly conserved in analogous domains from other bacterial endo-beta 1,4-glucanases. By analogy with other systems, the properties of the Pro-Thr box are consistent with an elongated conformation. The results of this investigation suggest that CenA has a tertiary structure which resembles that of certain fungal cellulases.     

Structural and functional relationships in two families of beta-1,4-glycanases.

CenA and Cex are beta-1,4-glycanases produced by the cellulolytic bacterium Cellulomonas fimi. Both enzymes are composed of two domains and contain six Cys residues. Two disulfide bonds were assigned in both enzymes by peptide analysis of the isolated catalytic domains. A further disulfide bond was deduced in both cellulose-binding domains from the absence of free thiols under denaturing conditions. Corresponding Cys residues are conserved in eight of nine other known C. fimi-type cellulose-binding domains. CenA and Cex belong to families B and F, respectively, in the classification of beta-1,4-glucanases and beta-1,4-xylanases based on similarities in catalytic domain primary structure. Disulfide bonds in the CenA catalytic domain correspond to the two disulfide bonds in the catalytic domain of Trichoderma reesei cellobiohydrolase II (family B) which stabilize loops forming the active-site tunnel. Sequence alignment indicates the probable occurrence of disulfides at equivalent positions in the two other family B enzymes. Partial resequencing of the gene encoding Streptomyces KSM-9 beta-1,4-glucanase CasA (family B) revealed five errors in the original nucleotide sequence analysis. The corrected amino acid sequence contains an Asp residue corresponding to the proposed proton donor in hydrolysis catalysed by cellobiohydrolase II. Cys residues which form disulfide bonds in the Cex catalytic domain are conserved in XynZ of Clostridium thermocellum and Xyn of Cryptococcus albidus but not in the other eight known family F enzymes. Like other members of its family, Cex catalyses xylan hydrolysis. The catalytic efficiency (kcat/Km) for hydrolysis of the heterosidic bond of p-nitrophenyl-beta-D-xylobioside is 14,385 min-1.mM-1 at 25 degrees C; the corresponding kcat/Km for p-nitrophenyl-beta-D-cellobioside hydrolysis is 296 min-1.mM-1.     

Purification and processing of cellulose-binding domain-alkaline phosphatase fusion proteins

Fusion of the leader peptide and the cellulose-binding domain (CBD) of endoglucanase A (CenA) from Cellulomonas fimi, with of without linker sequences, to the N-terminus of alkaline phosphatase (PhoA) from Escherichia coli leads to the accumulation of significant amounts of the CBD-PhoA fusion proteins in the supernatants of E. coli cultures. The fusion proteins can be purified from the supernatants by affinity chromatography on cellulose. The fusion protein can be desorbed from the cellulose with water or guanidine-HCl. If the sequence IEGR in present between the CBD and PhoA, the CBD can be cleaved from the PhoA with factor Xa. The efficiency of hydrolysis by factor Xa is strongly in fluenced by the amino acids on either side of the IEGR sequence. The CBD released by factor Xa is removed by adsorption to cellulose. A nonspecific proteases from C. fimi, which hydrolyzes native CenA between the CBD and the catalytic domain, may be useful for removing the CBD from some fusion proteins. (c) 1994 John Wiley & Sons, Inc.     

Cellulose-binding polypeptides from Cellulomonas fimi: endoglucanase D (CenD), a family A beta-1,4-glucanase.

Five cellulose-binding polypeptides were detected in Cellulomonas fimi culture supernatants. Two of them are CenA and CenB, endo-beta-1,4-glucanases which have been characterized previously; the other three were previously uncharacterized polypeptides with apparent molecular masses of 120, 95, and 75 kDa. The 75-kDa cellulose-binding protein was designated endoglucanase D (CenD). The cenD gene was cloned and sequenced. It encodes a polypeptide of 747 amino acids. Mature CenD is 708 amino acids long and has a predicted molecular mass of 74,982 Da. Analysis of the predicted amino acid sequence of CenD shows that the enzyme comprises four domains which are separated by short linker polypeptides: an N-terminal catalytic domain of 405 amino acids, two repeated sequences of 95 amino acids each, and a C-terminal domain of 105 amino acids which is > 50% identical to the sequences of cellulose-binding domains in Cex, CenA, and CenB from C. fimi. Amino acid sequence comparison placed the catalytic domain of CenD in family A, subtype 1, of beta-1,4-glycanases. The repeated sequences are more than 40% identical to the sequences of three repeats in CenB and are related to the repeats of fibronectin type III. CenD hydrolyzed the beta-1,4-glucosidic bond with retention of anomeric configuration. The activities of CenD towards various cellulosic substrates were quite different from those of CenA and CenB.     

Unusual sequence organization in CenB, an inverting endoglucanase from Cellulomonas fimi.

The nucleotide sequence of the cenB gene was determined and used to deduce the amino acid sequence of endoglucanase B (CenB) of Cellulomonas fimi. CenB comprises 1,012 amino acids and has a molecular weight of 105,905. The polypeptide is divided by so-called linker sequences rich in proline and hydroxyamino acids into five domains: a catalytic domain of 607 amino acids at the N terminus, followed by three repeats of 98 amino acids each which are greater than 60% identical, and a C-terminal domain of 101 amino acids which is 50% identical to the cellulose-binding domains of C. fimi cellulases Cex and CenA. A deletion mutant of the cenB gene encodes a polypeptide lacking the C-terminal 333 amino acids of CenB. The truncated polypeptide is catalytically active and, like intact CenB, binds to cellulose, suggesting that CenB has a second cellulose-binding site. The sequence of amino acids 1 to 461 of CenB is 35% identical, with a further 15% similarity, to that of a cellulase from avocado, which places CenB in cellulase family E. CenB releases mostly cellobiose and cellotetraose from cellohexaose. Like CenA, CenB hydrolyzes the beta-1,4-glucosidic bond with inversion of the anomeric configuration. The pH optimum for CenB is 8.5, and that for CenA is 7.5.     

Recombinant expression, characterization, and pulp prebleaching property of a Phanerochaete chrysosporium endo-β-1,4-mannanase

A Phanerochaete chrysosporium cDNA predicted to encode endo-1,4-β-d-mannanase, man5D, was cloned and expressed in Aspergillus niger. The coding region of the gene man5D was predicted to contain, in order from the N-terminal: a secretory signal peptide, cellulose-binding domain, linker region, and glycosyl hydrolase family 5 catalytic site. The enzyme was purified from culture filtrate of A. niger transformants that carried the recombinant man5D. Recombinant Man5D had an apparent molecular size of about 65 kDa by SDS-PAGE, and optimal activity at pH 4.0–6.0 and 60 °C. It was stable from pH 4.0 to 8.0 and up to 60 °C. The enzyme showed affinity for Avicel cellulose, suggesting that the predicted cellulose-binding domain is biologically functional. The specific activities of Man5D on mannan, galactomannan, and glucomannan at pH 5 and 60 °C ranged from 160 to 460 μmol/(min mg), with apparent K_m values from 0.54 to 2.3 mg/mL. Product analysis results indicated that Man5D catalyzes endo-cleavage, and appears to have substantial transglycosylase activity. When used to treat softwood kraft pulp, Man5D hydrolyzed mainly glucomannan and exhibited a positive effect as a prebleaching agent. Compared to a commercial prebleaching with xylanase, the prebleaching effect of Man5D was weaker but with reduced loss of fibre yield as determined by the release of solubilized sugars.     

High Speed Atomic Force Microscopy Visualizes Processive Movement of Trichoderma reesei Cellobiohydrolase I on Crystalline Cellulose

Fungal cellobiohydrolases act at liquid-solid interfaces. They have the ability to hydrolyze cellulose chains of a crystalline substrate because of their two-domain structure, i.e. cellulose-binding domain and catalytic domain, and unique active site architecture. However, the details of the action of the two domains on crystalline cellulose are still unclear. Here, we present real time observations of Trichoderma reesei (Tr) cellobiohydrolase I (Cel7A) molecules sliding on crystalline cellulose, obtained with a high speed atomic force microscope. The average velocity of the sliding movement on crystalline cellulose was 3.5 nm/s, and interestingly, the catalytic domain without the cellulose-binding domain moved with a velocity similar to that of the intact TrCel7A enzyme. However, no sliding of a catalytically inactive enzyme (mutant E212Q) or a variant lacking tryptophan at the entrance of the active site tunnel (mutant W40A) could be detected. This indicates that, besides the hydrolysis of glycosidic bonds, the loading of a cellulose chain into the active site tunnel is also essential for the enzyme movement.     

Cellulose-binding domains: potential for purification of complex proteins.

The endoglucanase CenA and the exoglucanase Cex from Cellulomonas fimi each contain a discrete cellulose-binding domain (CBD), at the amino-terminus or carboxyl-terminus respectively. The gene fragment encoding the CBD can be fused to the gene of a protein of interest. Using this approach hybrid proteins can be engineered which bind reversibly to cellulose and exhibit the biological activity of the protein partner. Alkaline phosphatase (PhoA) from Escherichia coli, and a beta-glucosidase (Abg) from an Agrobacterium sp. are dimeric proteins. The fusion polypeptides CenA-PhoA and Abg-CBC(Cex) are sensitive to proteolysis at the junctions between the fusion partners. Proteolysis results in a mixture of homo- and heterodimers; these bind to cellulose if one or both of the monomers carry a CBD, e.g. CenA-PhoA/CenA-PhoA and CenA-PhoA/PhoA. CBD fusion polypeptides could be used in this way to purify polypeptides which associate with the fusion partner.     

Purification and characterization of five cellulases and one xylanase from Penicillium brasilianum IBT 20888

The filamentous fungus Penicillium brasilianum IBT 20888 was cultivated on a mixture of 30 g l⁻¹ cellulose and 10 g l⁻¹ xylan for 111 h and the resulting culture filtrate was used for protein purification. From the cultivation broth, five cellulases and one xylanase were purified. Hydrolysis studies revealed that two of the cellulases were acting as cellobiohydrolases by being active on only microcrystalline cellulose (Avicel). Three of the cellulases were active on both Avicel and carboxymethyl cellulose indicating endoglucanase activity. Two of these showed furthermore mannanase activity by being able to hydrolyze galactomannan (locust bean gum). Adsorption studies revealed that the smaller of the two enzymes was not able to bind to cellulose. Similarity in molecular mass, pI and hydrolytic properties suggested that these two enzymes were identical, but the smaller one was lacking the cellulose-binding domain or an essential part of it. The basic xylanase (pI>9) was only active towards xylan. Two of the purified cellulases with endoglucanase activity were partly sequenced and based on sequence homology with known enzymes they were classified as belonging to families 5 and 12 of the glycosyl hydrolases.     

The cellulose-binding domain of endoglucanase A (CenA) from Cellulomonas fimi: evidence for the involvement of tryptophan residues in binding

Cellulomonas fimi endo-β-1, 4-glucanase A (CenA) contains a discrete N-terminal cellulose-binding domain (CBD_cenA)- Related CBDs occur In at least 16 bacterial glycanases and are characterized by four highly conserved Trp residues, two of which correspond to W14 and W68 of CBDcenA- The adsorption of CBD_cenA to Crystalline cellulose was compared with that of two Trp mutants (W14A and W68A). The affinities of the mutant CBDs for cellulose were reduced by approximately 50- and 30-fold, respectively, relative to the wild type. Physical measurements indicated that the mutant CBDs fold normally. Fluorescence data indicated that W14 and W68 were exposed on the CBD, consistent with their participation in binding to cellobiosyl residues on the cellulose surface.     

The modular cellulase CelZ of the thermophilic bacterium Clostridium stercorarium contains a thermostabilizing domain

The non-catalytic region of the Clostridium stercorarium cellulase CelZ (Avicelase I) comprises two protein segments (C and C′) grouped into different subfamilies of cellulose-binding domain (CBD) family III. The C-terminally located family IIIb domain C was identified as a true cellulose-binding domain responsible for anchoring the CelZ enzyme to cellulose. The family IIIc domain C′ immediately adjacent to the catalytic domain was unable to mediate binding to cellulose. A deletion study revealed a lack of independence of this pair of domains: almost the entire C′ domain was required to maintain the catalytic activity and the thermostability of the enzyme.     

Catalytic properties of the cellulose-binding endoglucanase F from Fibrobacter succinogenes S85.

The celF gene from the predominant cellulolytic ruminal bacterium Fibrobacter succinogenes encodes a 118.3-kDa cellulose-binding endoglucanase, endoglucanase F (EGF). This enzyme possesses an N-terminal cellulose-binding domain and a C-terminal catalytic domain. The purified catalytic domain displayed an activity profile typical of an endoglucanase, with high catalytic activity on carboxymethyl cellulose and barley beta-glucan. Immunoblotting of EGF and the formerly characterized endoglucanase 2 (EG2) from F. succinogenes with antibodies prepared against each of the enzymes demonstrated that EGF and EG2 contain cross-reactive epitopes. This data in conjunction with evidence that the proteins are the same size, share a 19-residue internal amino acid sequence, possess similar catalytic properties, and both bind to cellulose allows the conclusion that celF codes for EG2.     

Purification and Characterization of a Cellulose-Binding (beta)-Glucosidase from Cellulose-Degrading Cultures of Phanerochaete chrysosporium

Extracellular (beta)-glucosidase from cellulose-degrading cultures of Phanerochaete chrysosporium was purified by DEAE-Sephadex chromatography, by Sephacryl S-200 chromatography, and by fast protein liquid chromatography (FPLC) using a Mono Q anion-exchange column. Sodium dodecyl sulfate-polyacrylamide gel electrophoretic (SDS-PAGE) analysis of FPLC-purified (beta)-glucosidase indicated the presence of three enzyme forms with molecular weights of 96,000, 98,000, and 114,000. On further fractionation with a microcrystalline cellulose column, the 114,000-molecular-weight (beta)-glucosidase, which had 82% of the (beta)-glucosidase activity, was bound to cellulose. The (beta)-glucosidases with molecular weights of 96,000 and 98,000 did not bind to cellulose. The cellulose-bound (beta)-glucosidase was eluted completely from the cellulose matrix with water. Cellulose-bound (beta)-glucosidase catalyzed p-nitrophenylglucoside hydrolysis, suggesting that the catalytic site is not involved in cellulose binding. When the cellulose-binding form was incubated with papain for 20 h, no decrease in the enzyme activity was observed; however, approximately 74% of the papain-treated glucosidase did not bind to microcrystalline cellulose. SDS-PAGE analysis of the nonbinding glucosidase produced by papain indicated the presence of three bands with molecular weights in the range of 95,000 to 97,000. On the basis of these results, we propose that the low-molecular-weight (96,000 and 98,000) non-cellulose-binding (beta)-glucosidase forms are most probably formed from the higher-molecular-weight (114,000) cellulose-binding (beta)-glucosidase via extracellular proteolytic hydrolysis. Also, it appears that the extracellular (beta)-glucosidase from P. chrysosporium might be organized into two domains, a cellulose-binding domain and a catalytic domain. Kinetic characterization of the cellulose-binding form is also presented.     

Direct demonstration of the flexibility of the glycosylated proline-threonine linker in the Cellulomonas fimi Xylanase Cex through NMR spectroscopic analysis

The modular xylanase Cex (or CfXyn10A) from Cellulomonas fimi consists of an N-terminal catalytic domain and a C-terminal cellulose-binding domain, joined by a glycosylated proline-threonine (PT) linker. To characterize the conformation and dynamics of the Cex linker and the consequences of its modification, we have used NMR spectroscopy to study full-length Cex in its nonglycosylated ( approximately 47 kDa) and glycosylated ( approximately 51 kDa) forms. The PT linker lacks any predominant structure in either form as indicated by random coil amide chemical shifts. Furthermore, heteronuclear (1)H-(15)N nuclear Overhauser effect relaxation measurements demonstrate that the linker is flexible on the ns-to-ps time scale and that glycosylation partially dampens this flexibility. The catalytic and cellulose-binding domains also exhibit identical amide chemical shifts whether in isolation or in the context of either unmodified or glycosylated full-length Cex. Therefore, there are no noncovalent interactions between the two domains of Cex or between either domain and the linker. This conclusion is supported by the distinct (15)N relaxation properties of the two domains, as well as their differential alignment within a magnetic field by Pf1 phage particles. These data demonstrate that the PT linker is a flexible tether, joining the structurally independent catalytic and cellulose-binding domains of Cex in an ensemble of conformations; however, more extended forms may predominate because of restrictions imparted by the alternating proline residues. This supports the postulate that the binding-domain anchors Cex to the surface of cellulose, whereas the linker provides flexibility for the catalytic domain to hydrolyze nearby hemicellulose (xylan) chains.     

A possible role of cellulose-binding protein A (CBPA) in the adhesion of Eubacterium cellulosolvens 5 to cellulose

The cellulose-binding protein A (CBPA) of Eubacterium cellulosolvens 5 is a modular enzyme comprised of a catalytic domain, a cellulose-binding domain and a cell wall-binding domain. Cellobiose-grown cells changed their adhesion ability to cellulose depending on the growth phase. On the other hand, carboxymethyl cellulose (CMC)-grown cells bound to cellulose regardless of their growth phase. The distribution of CBPA in the culture supernatant and cell fractions changed depending on the carbon source contained in the medium and growth phase. The cellobiose-grown cells harvested from the culture of the late stationary growth phase did not bind to cellulose, but their adhesion ability was recovered by treatment with recombinant CBPA. Moreover, cellobiose-grown cells harvested from the culture of an early exponential growth phase bound to cellulose, but their adhesion ability was inhibited by treatment with anti-CBPA antiserum. CBPA rapidly decreased the viscosity of CMC, indicating that CBPA was endoglucanase. The results obtained in this study indicate that CBPA plays an important role in the adhesion of E. cellulosolvens 5 cells to cellulose.     

Engineering a family 9 processive endoglucanase from Paenibacillus barcinonensis displaying a novel architecture

Cel9B from Paenibacillus barcinonensis is a modular endoglucanase with a novel molecular architecture among family 9 enzymes that comprises a catalytic domain (GH9), a family 3c cellulose-binding domain (CBM3c), a fibronectin III-like domain repeat (Fn3_1,2), and a C-terminal family 3b cellulose-binding domain (CBM3b). A series of truncated derivatives of endoglucanase Cel9B have been constructed and characterized. Deletion of CBM3c produced a notable reduction in hydrolytic activity, while it did not affect the cellulose-binding properties as CBM3c did not show the ability to bind to cellulose. On the contrary, CBM3b exhibited binding to cellulose. The truncated forms devoid of CBM3b lost cellulose-binding ability and showed a reduced activity on crystalline cellulose, although activity on amorphous celluloses was not affected. Endoglucanase Cel9B produced only a small ratio of insoluble products from filter paper, while most of the reducing ends produced by the enzyme were released as soluble sugars (91%), indicating that it is a processive enzyme. Processivity of Cel9B resides in traits contained in the tandem of domains GH9–CBM3c, although the slightly reduced processivity of truncated form GH9–CBM3c suggests a minor contribution of domains Fn3_1,2 or CBM3b, not contained in it, on processivity of endoglucanase Cel9B.     

Engineering of Family-5 Glycoside Hydrolase (Cel5A) from an Uncultured Bacterium for Efficient Hydrolysis of Cellulosic Substrates

Cel5A, an endoglucanase, was derived from the metagenomic library of vermicompost. The deduced amino acid sequence of Cel5A shows high sequence homology with family-5 glycoside hydrolases, which contain a single catalytic domain but no distinct cellulose-binding domain. Random mutagenesis and cellulose-binding module (CBM) fusion approaches were successfully applied to obtain properties required for cellulose hydrolysis. After two rounds of error-prone PCR and screening of 3,000 mutants, amino acid substitutions were identified at various positions in thermotolerant mutants. The most heat-tolerant mutant, Cel5A_2R2, showed a 7-fold increase in thermostability. To enhance the affinity and hydrolytic activity of Cel5A on cellulose substrates, the family-6 CBM from Saccharophagus degradans was fused to the C-terminus of the Cel5A_2R2 mutant using overlap PCR. The Cel5A_2R2-CBM6 fusion protein showed 7-fold higher activity than the native Cel5A on Avicel and filter paper. Cellobiose was a major product obtained from the hydrolysis of cellulosic substrates by the fusion enzyme, which was identified by using thin layer chromatography analysis.     

Dynamic Interaction of Trichoderma reesei Cellobiohydrolases Cel6A and Cel7A and Cellulose at Equilibrium and during Hydrolysis

The binding of cellobiohydrolases to cellulose is a crucial initial step in cellulose hydrolysis. In the search for a detailed understanding of the function of cellobiohydrolases, much information concerning how the enzymes and their constituent catalytic and cellulose-binding domains interact with cellulose and with each other and how binding changes during hydrolysis is still needed. In this study we used tritium labeling by reductive methylation to monitor binding of the two Trichoderma reesei cellobiohydrolases, Cel6A and Cel7A (formerly CBHII and CBHI), and their catalytic domains. Measuring hydrolysis by high-performance liquid chromatography and measuring binding by scintillation counting allowed us to correlate activity and binding as a function of the extent of degradation. These experiments showed that the density of bound protein increased with both Cel6A and Cel7A as hydrolysis proceeded, in such a way that the adsorption points moved off the initial binding isotherms. We also compared the affinities of the cellulose-binding domains and the catalytic domains to the affinities of the intact proteins and found that in each case the affinity of the enzyme was determined by the linkage between the catalytic and cellulose-binding domains. Desorption of Cel6A by dilution of the sample showed hysteresis (60 to 70% reversible); in contrast, desorption of Cel7A did not show hysteresis and was more than 90% reversible. These findings showed that the two enzymes differ with respect to the reversibility of binding.