Enhancement of thermostable lipase production by a genotypically identified extremophilic Bacillus subtilis NS 8 in a continuous bioreactor

Bacillus strain NS 8, a lipase-producing bacterium isolated from a Malaysian hot spring, is able to tolerate a broad range of temperature and pH, which makes it beneficial for this study. It generated PCR products with molecular weight of 1,532 bp, and the 16S rRNA sequence analysis identified it as Bacillus subtilis with accession number AB110598. It showed a 71% similarity index with B. subtilis using Biolog Microstation System. Its lipase production was optimized using a shake flask system by changing the physical (agitation speed, pH and temperature) and nutritional (nitrogen, carbon and minerals) factors. The most suitable combination of the basal medium for lipase production was 2.5% olive oil (carbon), 1.5% peptone (nitrogen), 0.1% MgSO(4) (mineral) at an optimum temperature of 50°C, pH 7.5 and 150 rpm agitation, giving an enzyme yield of 4.23 U/ml. Statistical optimization using response surface methodology was carried out. An optimum lipase production of 5.67 U/ml was achieved when olive oil concentration of 3%, peptone 2%, MgSO(4)·7H(2)O 0.2% and an agitation rate of 200 rpm were combined. Lipase production was further carried out inside a 2-liter bioreactor, which yielded an enzyme activity of 14.5 U/ml after 15 h of incubation.     

Purification and characterization of a novel thermostable lipase from Bacillus sp

A thermostable lipase from Bacillus sp. has been purified to homogeneity as judged by disc-PAGE, SDS-PAGE, and isoelectric focusing. The purification included ammonium sulfate fractionation, treatment with acrinol, and sequential column chromatographies on DEAE-Sephadex A-50, Toyopearl HW-55F, and Butyl Toyopearl 650M. The purified enzyme was found to be a monomeric protein with Mr of 22,000, and pI of 5.1. The optimal pH at 30 degrees C, and optimal temperature at pH 5.6 were 5.5-7.2, and 60 degrees C, respectively, when olive oil was used as the substrate. The substrate specificity towards simple triglycerides was broad and 1- and 3-positioned ester bonds were hydrolyzed in preference to a 2-positioned ester bond. The addition of acetone to the assay mixture in the range of 0-60% (v/v) stimulated the enzyme remarkably, whereas n-hexane had an inhibitory effect.     

Overexpression and characterization of a lipase from Bacillus subtilis

A novel plasmid, pBSR2, was constructed by incorporating a strong lipase promoter and a terminator into the original pBD64. A mature lipase gene from Bacillus subtilis strain IFFI10210, an existing strain for lipase expression, was cloned into the plasmid pBSR2 and transformed into B. subtilis A.S.1.1655. Thus, an overexpression strain, BSL2, was obtained. The yield of lipase is about 8.6 mg protein/g of wet weight of cell mass and 100-fold higher than that in B. subtilis strain IFFI10210. The recombinant lipase was purified in a three-step procedure involving ammonium sulfate fractionation, ion exchange, and gel filtration chromatography. Characterizations of the purified enzyme revealed a molecular mass of 24 kDa in sodium dodecyl sulfate-polyacrylamide gel electrophoresis, maximum activity at 43 degrees C and pH 8.5 for hydrolysis of p-nitrophenyl caprylate. The values of Km and Vm were found to be 0.37 mM and 303 micromol mg-1 min-1, respectively. The substrate specificity study showed that p-nitrophenyl caprylate is a preference of the enzyme. The metal ions Ca2+, K+, and Mg2+ can activate the lipase, whereas Fe2+, Cu2+, and Co2+ inhibited it. The activity of the lipase can be increased about 48% by sodium taurocholate at the concentration of 7 mM and inhibited at concentrations over 10 mM.     

Purification and kinetics of a protease-resistant,neutral, and thermostable phytase from Bacillus subtilis subsp. subtilis JJBS250 ameliorating food nutrition

Abstract

A novel protease-resistant and thermostable phytase from Bacillus subtilis subsp. subtilis JJBS250 was purified 36-fold to homogeneity with a combination of ammonium sulfate precipitation followed by Q-Sepharose and Sephadex G-50 chromatographic techniques. The estimated molecular mass of the purified phytase was 46?kDa by electrophoresis with optimal activity at pH 7.0 and 70?°C. About 19% of original activity was maintained at 80?°C for 10?min. Phytase activity was stimulated in presence of surfactants like Tween-20, Tween-80, and Triton X-100 and metal ions like Ca⁺², K⁺, and Co⁺² and it was inhibited by SDS and Mg⁺², Al⁺², and Fe⁺². Purified enzyme showed specificity to different salts of phytic acid and values of K_m and V_max were 0.293?mM and 11.49 nmoles s^?1, respectively for sodium phytate. The purified enzyme was resistant to proteases (trypsin and pepsin) that resulted in amelioration of food nutrition with simultaneous release of inorganic phosphate, reducing sugars, and soluble protein.     

Purification and characterization of a novel thermostable lipase from Pseudomonas cepacia.

A thermostable lipase from Pseudomonas cepacia has been purified to homogeneity as judged by SDS-PAGE and isoelectric focusing. The purification included treatment of the culture supernatant with acrinol, hydrophobic interaction chromatography, and gel filtration. The enzyme was a monomeric protein with M(r) of 36,500 and pI of 5.1. The optimal pH at 50 degrees C and optimal temperature at pH 6.5 were 5.5-6.5 and 55-60 degrees C, respectively, when olive oil was used as the substrate. Simple triglycerides of short and middle chain fatty acids (C < or = 12) were the preferred substrates over those of long chain fatty acids. The enzyme cleaved all the ester bonds of triolein, with some preference for the 1,3-ester bonds. The enzyme retained all its activity even after incubation at 75 degrees C (pH 6.5) for 30 min. Further, the activity was not impaired during 21 h storage at pH 6.5 in 40% water-miscible solvents including methanol, ethanol, acetone, acetonitrile, dimethylformamide, dimethylsulfoxide, and dioxane. The addition of dimethylsulfoxide or acetone to the assay mixture in the range of 0-35% stimulated the enzyme, whereas benzene or n-hexane had an inhibitory effect. These properties together with the N-terminal amino acid sequence confirmed that the enzyme differs from the known Pseudomonas sp. lipases.     

Purification and characterization of YxeI, a penicillin acylase from Bacillus subtilis

The paper reports the purification and characterization of the first penicillin acylase from Bacillus subtilis. YxeI, the protein annotated as hypothetical, coded by the gene yxeI in the open reading frame between iol and hut operons in B. subtilis was cloned and expressed in Eshcherichia coli, purified and characterized. The purified protein showed measurable penicillin acylase activity with penicillin V. The enzyme was a homotetramer of 148 kDa. The apparent K_m of the enzyme for penicillin V and the synthetic substrate 2-nitro-5-(phenoxyacetamido)-benzoic acid was 40 mM and 0.63 mM, respectively, and the association constants were 8.93 × 10² M⁻¹ and 2.51 × 10⁵ M⁻¹, respectively. It was inhibited by cephalosporins and conjugated bile salts, substrates of the closely related bile acid hydrolases. It had good sequence homology with other penicillin V acylases and conjugated bile acid hydrolases, members of the Ntn hydrolase family. The N-terminal nucleophile was a cysteine which is revealed by a simple removal of N-formyl-methionine. The activity of the protein was affected by high temperature, acidic pH and the presence of the denaturant guanidine hydrochloride.     

Structural modeling and characterization of a thermostable lipase from Bacillus stearothermophilus P1

The moderate thermophilic bacterium Bacillus stearothermophilus P1 expresses a thermostable lipase that was active and stable at the high temperature. Based on secondary structure predictions and secondary structure-driven multiple sequence alignment with the homologous lipases of known three-dimensional (3-D) structure, we constructed the 3-D structure model of this enzyme and the model reveals the topological organization of the fold, corroborating our predictions. We hypothesized for this enzyme the alpha/beta-hydrolase fold typical of several lipases and identified Ser-113, Asp-317, and His-358 as the putative members of the catalytic triad that are located close to each other at hydrogen bond distances. In addition, the strongly inhibited enzyme by 10 mM PMSF and 1-hexadecanesulfonyl chloride was indicated that it contains a serine residue which plays a key role in the catalytic mechanism. It was also confirmed by site-directed mutagenesis that mutated Ser-113, Asp-317, and His-358 to Ala and the activity of the mutant enzyme was drastically reduced.     

Molecular cloning, purification and characterization of thermostable beta-1,3-1,4 glucanase from Bacillus subtilis A8-8

A gene encoding a beta-1,3-1,4-glucanase (CelA) belonging to family 5 of glycoside hydrolases was cloned and sequenced from the Bacillus subtilis A8-8. The open-reading-frame of celA comprised 1499 base pairs and the enzyme was composed of 500 amino acids with a molecular mass of 55 kDa. The recombinant beta-1,3-1,4 glucanase was purified by GST-fusion purification system. The pH and temperature optima of the enzyme were 8.0 and 60 degrees C, respectively. The enzyme was stable within pH 6.0-9.0. It was stable up to 60 degrees C and retained 30% of its original activity at 70 degrees C for 60 min. It hydrolyzed lichenan, CMC, xylan, laminarin, avicel and pNPC, but was inactive towards cellobiose. The enzyme activity was markedly activated by Co2+ and Mn2+, but was strongly inactivated by Fe3+. The truncated gene, devoid of cellulose-binding domain (CBD) showed 60% of activity and bound to avicel.     

Purification and characterization of a thermostable alkaline protease from alkalophilic Bacillus pumilus

AIMS: An investigation was carried out on the purification and characterization of an alkaline protease from Bacillus pumilus MK6-5. METHODS AND RESULTS: An alkalophilic Bacillus pumilus MK6-5 was grown in a laboratory fermenter containing 1% reverse osmosis concentrated cheese whey powder, 0.25% corn steep liquor, 1% glucose, 0.5% tryptone, 1% sodium citrate, 0.02% MgSO4.7H2O and 0.65% Na2CO3 at 35 degrees C and pH 9.6, agitation at 250 rev min(-1) and aeration of 1 vvm for 60 h. When the enzyme was purified using ammonium sulphate precipitation, ion exchange and gel filtration chromatographies, a 26.2% recovery of enzyme with 36.6-fold purification was recorded. The purified protease was found to be homogenous by SDS-PAGE with molecular mass estimate of 28 kDa. The enzyme was optimally active at pH 11.5 and temperature of 55-60 degrees C. The Km and kcat values observed with synthetic substrates at 37 degrees C and pH 8.0 were 1.1 mmol l(-1) and 624 s(-1) for Glu-Gly-Ala-Phe-pNA and 3.7 mmol l(-1) and 826 s(-1) for Glu-Ala-Ala-Ala-pNA, respectively. The kinetic data revealed that small aliphatic and aromatic residues were the preferred residues at the P1 position. Inhibition profile exhibited by PMSF suggested the B. pumilus protease to be an alkaline serine protease. CONCLUSIONS: Bacillus pumilus MK6-5 produced a calcium-dependent, thermostable alkaline serine protease. SIGNIFICANCE AND IMPACT OF THE STUDY: The thermostable alkaline protease from Bacillus pumilus MK6-5 will be extremely useful in ultrafiltration membrane cleaning due to its ability to work in broad pH and temperature ranges, and tolerance to detergents, unlike the mesophilic proteases which face these limitations.     

Purification and characterization of thermostable leucine dehydrogenase from Bacillus stearothermophilus

Leucine dehydrogenase (l-leucine: NAD⁺ oxidoreductase, deaminating, EC 1.4.1.9) has been purified to homogeneity from a moderate thermophilic bacterium, Bacillus stearothermophilus. Am improved method of preparative slab gel electrophoresis was used effectively to purify it. The enzyme has a molecular mass of about 300,000 and consists of six subunits with identical molecular mass (Mr, 49,000). The enzyme does not lose its activity by heat treatment at 70° C for 20 min, and incubation in the pH range of 5.5–10.0 at 55° C for 5 min. It is stable in 10 mM phosphate buffer (pH 7.2) containing 0.01% 2-mercaptoethanol at over 1 month, and is resistant to detergent and ethanol treatment. The enzyme catalyzes the oxidative deamination of branched-chain l-amino acids and the reductive amination of their keto analogs in the presence of NAD⁺ and NADH, respectively, as the coenzymes. The pH optima are 11 for the deamination of l-leucine, and 9.7 and 8.8 for the amination of -ketoisocaproate and -ketoisovalerate, respectively. The Michaelis constants were determined: 4.4 mM for l-leucine, 3.3 mM for l-valine, 1.4 mM for l-isoleucine and 0.49 mM for NAD⁺ in the oxidative deamination. The B. stearothermophilus enzyme shows similar catalytic properties, but higher activities than that from Bacillus sphaericus.Dedicated to Prof. Dr. G. Drews on the occasion of his 60th birthday     

Purification and characterization of a mesophilic lipase from Bacillus subtilis FH5 stable at high temperature and pH

Lipases are a class of enzymes which catalyze the hydrolysis of long-chain triglycerides. Microbial lipases are currently receiving much attention with the rapid development of enzyme technology. Bacillus subtilis FH5, isolated from tannery wastes, produced a thermostable alkalophilic lipase and was purified to homogeneity as judged by SDS-PAGE. The purification steps included acetone fractionation and sequential column chromatography on DEAE-cellulose, Sephadex G-75 and adsorption chromatography on Hydroxylapatite. The results of chromatographies showed that two types of lipases were present having molecular weights approximately 62 kDa and 24 kDa, respectively. The purified enzyme was found to be 100% stable at pH 10 and about 80% residual activity was present at 60 degrees C. The enzyme was found to be stable in the presence of Mg2+, Mn2+ and Ca2+ ions. Km value was calculated as 5.05 mM and Vmax as 0.416 micromol/ml/min. Bacillus subtilis FH5 was isolated from tannery waste, therefore, enzyme is environmentally compatible for application in leather degreasing process.     

Purification and characterization of thermostable beta-mannanase and alpha-galactosidase from Bacillus stearothermophilus

Bacillus stearothermophilus secretes beta-mannanase and alpha-galactosidase enzymatic activities capable of hydrolyzing galactomannan substrates. Expression of the hemicellulase activities in the presence of locust bean gum was sequential, with mannanase activity preceding expression of alpha-galactosidase activity. The hemicellulase activities were purified to homogeneity by a combination of ammonium sulfate fractionation, gel filtration, hydrophobic interaction chromatography, and ion-exchange and chromatofocusing techniques. The purified beta-D-mannanase is a dimeric enzyme (162 kilodaltons) composed of subunits having identical molecular weight (73,000). Maximal activity did not vary between pH 5.5 and 7.5. The beta-D-mannanase activity exhibited thermostability, retaining nearly full activity after incubation for 24 h at 70 degrees C and pH 6.5. The enzyme displayed high specificity for galactomannan substrates, with no-secondary xylanase or cellulase activity detected. Hydrolysis of locust bean gum yielded short oligosaccharides compatible with an endo mode of substrate depolymerization. Initial rate velocities of the mannanase activity displayed substrate inhibition and yielded estimates for Vmax and Km of 455 +/- 60 U/mg and 1.5 +/- 0.3 mg/ml, respectively, at 70 degrees C and pH 6.5. The alpha-galactosidase activity corresponded to a trimeric enzyme (247 kilodaltons) having subunits of identical molecular weight (82,000). The alpha-galactosidase had maximal activity at pH 7 to 7.5 and retained full activity after 24 h of incubation at 60 degrees C. The enzyme had only limited activity on galactomannan substrates as compared with hydrolysis of p-nitrophenyl alpha-D-galactose. Kinetics of p-nitrophenyl alpha-D-galactose hydrolysis yielded linear reciprocal plots corresponding to Vmax and Km of 195 +/- 10 U/mg and 0.25 +/- 0.02 mM, respectively, at 60 degrees C and pH 7. The characterization of the mannanase activity is consistent with its potential use in enzymatic bleaching of softwood pulps.     

Purification and characterization of NADH dehydrogenase from Bacillus subtilis

NADH dehydrogenase from Bacillus subtilis W23 has been isolated from membrane vesicles solubilized with 0.1% Triton X-100 by hydrophobic interaction chromatography on an octyl-Sepharose CL-4B column. A 70-fold purification is achieved. No other components could be detected with sodium dodecyl sulphate polyacrylamide gel electrophoresis. Ferguson plots of the purified protein indicated no anomalous binding of sodium dodecyl sulphate and an accurate molecular weight of 63 000 could be determined. From the amino acid composition a polarity of 43.8% was calculated indicating that the protein is not very hydrophobic. Optical absorption spectra and acid extraction of the enzyme chromophore followed by thin-layer chromatography showed that the enzyme contains 1 molecule FAD/molecule. The enzyme was found to be specific for NADH. NADPH is oxidized at a rate which is less than 6% of the rate of NADH oxidation. The activity of the enzyme as determined by NADH:3-(4'-5'-dimethyl-thiazol-2-yl)2,4-diphenyltetrazolium bromide oxidoreduction is optimal at 37 C and pH 7.5-8.0. The purified enzyme has a Kapp for NADH of 60 microM and a V of 23.5 mumol NADH/min X mg protein. These parameters are not influenced by phospholipids. The enzyme activity is hardly or not at all affected by NADH-related compounds such as ATP, ADP, AMP, adenosine, deoxyadenosine, adenine and nicotinic amide indicating the high binding specificity of the enzyme for NADH.     

Purification and characterization of catalase-1 from Bacillus subtilis

The catalase activity produced in vegetative Bacillus subtilis, catalase-1, has been purified to homogeneity. The apparent native molecular weight was determined to be 395,000. Only one subunit type with a molecular weight of 65,000 was present, suggesting a hexamer structure for the enzyme. In other respects, catalase-1 was a typical catalase. Protoheme IX was identified as the heme component on the basis of the spectra of the enzyme and of the isolated hemochromogen. The ratio of protoheme/subunit was 1. The enzyme remained active over a broad pH range of 5-11 and was only slowly inactivated at 65 degrees C. It was inhibited by cyanide, azide, and various sulfhydryl compounds. The apparent Km for hydrogen peroxide was 40.1 mM. The amino acid composition was typical of other catalases in having relatively low amounts of tryptophan and cysteine.     

Optimization of a thermostable lipase from Bacillus stearothermophilus P1: overexpression, purification, and characterization

An expression library was generated from a partial NcoI and HindIII digest of genomic DNA from the thermophilic bacterium, Bacillus stearothermophilus P1. The DNA fragments were cloned into the expression vector pQE-60 and transformed into Escherichia coli M15[EP4]. Sequence analysis of a lipase gene showed an open reading frame of 1254 nucleotides coding a 29-amino-acid signal sequence and a mature sequence of 388 amino acids. The expressed lipase was isolated and purified to homogeneity in a single chromatographic step. The molecular mass of the lipase was determined to be approximately 43 kDa by SDS-PAGE and mass spectrometry. The purified lipase had an optimum pH of 8.5 and showed maximal activity at 55 degrees C. It was highly stable in the temperature range of 30-65 degrees C. The highest activity was found with p-nitrophenyl ester-caprate as the synthetic substrate and tricaprylin as the triacylglycerol. Its activity was strongly inhibited by 10 mM phenylmethanesulfonyl fluoride and 1-hexadecanesulfonyl chloride, indicating that it contains a serine residue which plays a key role in the catalytic mechanism. In addition, it was stable for 1 h at 37 degrees C in 0.1% Chaps and Triton X-100.     

Purification and characterization of thermostable aspartate aminotransferase from a thermophilic Bacillus species.

Aspartate aminotransferase (EC 2.6.1.1) was purified to homogeneity from cell extracts of a newly isolated thermophilic bacterium, Bacillus sp. strain YM-2. The enzyme consisted of two subunits identical in molecular weight (Mr, 42,000) and showed microheterogeneity, giving two bands with pIs of 4.1 and 4.5 upon isoelectric focusing. The enzyme contained 1 mol of pyridoxal 5'-phosphate per mol of subunit and exhibited maxima at about 360 and 415 nm in absorption and circular dichroism spectra. The intensities of the two bands were dependent on the buffer pH; at neutral or slightly alkaline pH, where the enzyme showed its maximum activity, the absorption peak at 360 nm was prominent. The enzyme was specific for L-aspartate and L-cysteine sulfinate as amino donors and alpha-ketoglutarate as an amino acceptor; the KmS were determined to be 3.0 mM for L-aspartate and 2.6 mM for alpha-ketoglutarate. The enzyme was most active at 70 degrees C and had a higher thermostability than the enzyme from Escherichia coli. The N-terminal amino acid sequence (24 residues) did not show any similarity with the sequences of mammalian and E. coli enzymes, but several residues were identical with those of the thermoacidophilic archaebacterial enzyme recently reported.     

Purification and characterization of a thermostable xylanase from Bacillus stearothermophilus T-6.

Bacillus stearothermophilus T-6 produces an extracellular xylanase that was shown to optimally bleach pulp at pH 9 and 65 degrees C. The enzyme was purified and concentrated in a single adsorption step onto a cation exchanger and is made of a single polypeptide with an apparent M(r) of 43,000 (determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis). Xylanase T-6 is an endoxylanase that completely degrades xylan to xylose and xylobiose. The pIs of the purified protein were 9 and 7 under native and denaturing conditions, respectively. The optimum activity was at pH 6.5; however, 60% of the activity was still retained at pH 10. At 65 degrees C and pH 7, the enzyme was stable for more than 10 h; at 65 degrees C and pH 9, the half-life of the enzyme was approximately 6 h. Kinetic experiments at 55 degrees C gave Vmax and Km values of 288 U/mg and 1.63 mg/ml, respectively. The enzyme had no apparent requirement for cofactors, and its activity was strongly inhibited by Zn2+, Cd2+, and Hg2+. Xylan completely protected the protein from inactivation by N-bromosuccinimide. The N-terminal sequence of the first 45 amino acids of the enzyme showed high homology with the N-terminal region of xylanase A from the alkalophilic Bacillus sp. strain C-125.     

Purification and characterization of two thermostable protease fractions from Bacillus megaterium

Protease enzyme from Bacillus megaterium was successively purified by ammonium sulfate precipitation, ion exchange chromatography on DEAE-cellulose and gel filtration chromatography on Sephadex G-200. The purification steps of protease resulted in the production of two protease fractions namely protease P1 and P2 with specific activities of 561.27 and 317.23 U mg^?1 of protein, respectively. The molecular weights of B. megaterium P1 and P2 were 28 and 25 KDa, respectively. The purified fractions P1 and P2 were rich in aspartic acid and serine. Relatively higher amounts of alanine, leucine, glycine, valine, thereonine valine and glutamic acid were also present. The maximum protease activities for both enzyme fractions were attained at 50 °C, pH 7.5, 1% of gelatine concentration and 0.5 enzyme concentrations. P1 and P2 fractions were more stable over pH 7.0–8.5 and able to prolong their thermal stability up to 80 °C. The effect of different inhibitors on the protease activity of both enzyme fractions was also studied. The enzyme was found to be serine active as it had been affected by lower concentrations of phenylmethylsulfonyl fluoride (PMSF). Complete dehairing of the enzyme-treated skin was achieved in 12 h, at room temperature.     

Purification and characterization of a novel plant-type carbonic anhydrase from Bacillus subtilis

Carbonic anhydrase enzyme, one of the fastest known enzymes, remains largely unexplored in prokaryotes when compared to its mammalian counterparts despite its ubiquity. In this study, the enzyme has been purified from Bacillus subtilis SA3 using sequential Sephadex G-75 chromatography, DEAE cellulose chromatography, and sepharose-4B-L-tyrosinesulphanilamide affinity chromatography and characterized to provide additional insights into its properties. The apparent molecular mass of carbonic anhydrase obtained by SDS-PAGE was found to be approximately 37 kDa. Isoelectric focusing of the purified enzyme revealed an isoelectric point (pI) of around 6.1 when compared with marker. The presence of metal ions such as Zn²⁺, Co²⁺, Cu²⁺, Fe³⁺, Mg²⁺, and anion SO₄⁻ increased enzyme activity while strong inhibition was observed in the presence of Hg²⁺, Cl⁻, HCO₃⁻, and metal chelator EDTA. The optimum pH and temperature for the enzyme were found to be 8.3 and 37°C, respectively. Enzyme kinetics with p-nitrophenyl acetate as substrate at pH 8.3 and 37°C determined the V_max and K_m values of the enzyme to be 714.28 μmol/mg protein/min and 9.09 mM, respectively. The K_i value for acetazolamide was 0.22 mM, compared to 0.099 mM for sulphanilamide. The results from N-terminal amino acid sequencing imply the purified protein is a putative beta-carbonic anhydrase with close similarities to CAs from plants, microorganisms.