Capillary electrophoretic enzyme immunoassay with electrochemical detection for thyroxine

A capillary electrophoretic enzyme immunoassay with electrochemical detection (CE-EIA-ED) has been developed. In this method, antigen (Ag) competes with horseradish peroxidase (HRP)-labeled antigen (HRP-Ag) for a limited number of antibody (Ab) binding sites. The free HRP-Ag and the bound HRP-Ag-Ab complex are separated by capillary electrophoresis in a separation capillary. Then they catalyze the oxidation of their enzyme substrate 3,3',5,5'-tetramethylbenzide (TMB (reduced form)) with H(2)O(2) in a reaction capillary, which follows the separation capillary. The reaction product (TMB (oxidized form)) is amperometrically determined using a carbon fiber microdisk bundle electrode at the outlet of the reaction capillary. Due to the amplification of the enzyme, the concentration of TMB(Ox) is much higher than those of free HRP-Ag and the bound HRP-Ag-Ab complex. Therefore, the limit of detection (LOD) of CE-EIA-ED is very low. The method has been used to determine thyroxine in human serum. A concentration of LOD of 3.8 x 10(-9)mol/L, which corresponds to a mass LOD of 23.2 amol, was achieved.     

Microbead-based electrochemical immunoassay with interdigitated array electrodes

The objective of this study was to develop a sensitive and miniaturized immunoassay by coupling a microbead-based immunoassay with an interdigitated array (IDA) electrode. An IDA electrode amplifies the signal by recycling an electrochemically redox-reversible molecule. The microfabricated platinum electrodes had 25 pairs of electrodes with 1.6-microm gaps and 2.4-microm widths. An enzyme-labeled sandwich immunoassay on paramagnetic microbeads with mouse IgG as the analyte and beta-galactosidase as the enzyme label was used as the model system. beta-Galactosidase converted p-aminophenyl beta-D-galactopyranoside to p-aminophenol (PAP). This enzyme reaction was measured continuously by positioning the microbeads near the electrode surface with a magnet. Electrochemical recycling occurred with PAP oxidation to p-quinone imine (PQI) at +290 mV followed by PQI reduction to PAP at -300 mV vs Ag/AgCl. Dual-electrode detection amplified the signal fourfold compared to single-electrode detection, and the recycling efficiency reached 87%. A calibration curve of PAP concentration vs anodic current was linear between 10(-4) and 10(-6)M. A signal from 1000 beads in a 20-microL drop was detectable and the immunoassay was complete within 10 min with a detection limit of 3.5x10(-15)mol mouse IgG.     

Successively amplified electrochemical immunoassay based on biocatalytic deposition of silver nanoparticles and silver enhancement

A successively signal-amplified electrochemical immunoassay has been reported on the basis of the biocatalytic deposition of silver nanoparticles with their subsequent enlargement by nanoparticle-promoted catalytic precipitation of silver from the silver-enhancer solution. The immunoassay was carried out based on a heterogeneous sandwich procedure using polystyrene microwells to immobilize antibody. After all the processes comprising the formation of immunocomplex, biocatalytic deposition of silver nanoparticles and following silver enhancement were completed, the silver on polystyrene microwells was dissolved and quantified by anodic stripping voltammetry (ASV). The effect of relevant experimental conditions, including the concentration of ascorbic acid 2-phosphate (AA-p) substrate and Ag(I) ions, the biocatalytic deposition time, and of crucial importance, the silver enhancement time, were investigated and optimized. The anodic stripping peak current was proportional to the concentration of human IgG in a dynamic range of 0.1-10 ng ml(-1) with a detection limit of 0.03 ng ml(-1). Scanning electron microscope (SEM) was applied to characterize the silver nanoparticles before and after silver enhancement on the surface of polystyrene microplates. By coupling the highly catalytic effect of enzyme and nanoparticles to successively amplify the analytical signal, the sensitivity of immunoassay was enhanced so dramatically that this approach would be a promising strategy to achieve a lower detection limit for bioassays.     

A channel-resolved approach coupled with magnet-captured technique for multianalyte chemiluminescent immunoassay

A concept of channel-resolved multianalyte immunoassay (MAIA) and a semi-automated flow-through chemiluminescent (CL) MAIA system coupled with magnet-captured technique were proposed for rapid quantitation of different analytes in a single run. Using alpha-fetoprotein (AFP), carcinoembryonic antigen (CEA) and carcinoma antigen 125 (CA 125) as model analytes. They were firstly incubated in the mixtures of capture antibodies-immobilized paramagnetic microspheres (PMs) and corresponding alkaline phosphatase-labeled antibodies under stir and pumped into three parallel detection channels, the PMs were simultaneously captured by magnet, and the CL signals from the three channels were then sequentially collected with the aid of optical shutters to perform quantitative detection. AFP, CEA and CA 125 could be rapidly assayed in the ranges of 1.0-40microg/l, 0.20-30microg/l and 1.0-50kU/l with the detection limits of 0.60microg/l, 0.080microg/l and 0.70kU/l at 3sigma, respectively. After manual dispensing of specimen and reagents the whole assay process could be completed in 18min. The assay results of clinical serum samples with the proposed method were in acceptable agreement with the reference values. This system, based on the designed channel-resolved strategy and magnet-captured technique provides a semi-automated, reusable, simple, sensitive, rapid and low-cost approach for MAIA without using of expensive array detector.     

A doubly amplified electrochemical immunoassay for carcinoembryonic antigen

An ultrasensitive electrochemical immunoassay (EIA) for the detection of carcinoembryonic antigen (CEA) is described in this report. The assay involves utilizing enzyme-catalyzed deposition of a redox polymer and electrocatalytic oxidation of ascorbic acid (AA) by the deposited redox polymer, a dual-amplification scheme to enhance analytical signals. Briefly, CEA capturing antibody and redox polymer anchoring agent were covalently immobilized on a gold electrode. After incubating with CEA, the electrode was treated in detection antibody-glucose oxidase conjugate solution. Thereafter, it was dipped into the redox polymer solution. Upon the addition of glucose, the redox polymer was enzymatically reduced and deposited on the electrode surface. The deposited redox polymer exhibits excellent electrocatalytic activity towards the oxidation of AA. Consequently, CEA could be quantified amperometrically. This electrochemical immunoassay combines the specificity of the immunological reaction with the sensitivity of the doubly amplified electrochemical detection.     

Electrochemical immunoassay for CD10 antigen using scanning electrochemical microscopy

In the present study, a scanning electrochemical microscopic (SECM) method for imaging of antigen/antibody binding was proposed using CD10 antigen as the model. On the basis of anti-CD10 modified electrode, an electrochemical immunosensor for sensitive detection of CD10 antigen at low potential was developed by a multiple signal amplification strategy. Gold nanoparticles (AuNPs) served as carriers to load more secondary antibodies (Ab(2)) and horseradish peroxidase (HRP). The tip ultramicroelectrode was used to monitor the reduction current, and the 3-D images were obtained simultaneously. Under optimized conditions, the approach provided a linear response range from 1.0×l0(-11) to 6.0×l0(-11) M with a detection limit of 4.38×10(-12)M. SECM is a versatile system that can be used not only for quantitative current analysis but also for topographic imaging of binding reaction. In addition, specific binding of antigen-antibody could also be continuously and successfully monitored by SECM. This immunoassay provides a sensitive approach for detecting tumor marker, and has potential application in clinical diagnostics.     

Ultrasensitive chemiluminescent immunoassay of Salmonella with silver enhancement of nanogold labels

In this paper, silver enhancement of nanogold labels coupled with chemiluminescence detection was developed for ultrasensitive immunoassay of Salmonella based upon antigen–antibody immunoreaction. Polyclonal rabbit anti‐Salmonella sp. antibodies (pAb) were employed to establish the analytical protocol. The pAb coated onto ELISA microwell plates and Au nanoparticles (Au NPs) conjugated pAb capture target Salmonella to form a sandwich‐type complex. Silver then was in situ deposited around the Au NPs core and resulted in the signal amplification. In consequence, silver was dissolved to form Ag⁺ and a sensitive chemiluminescence based on the Ag⁺–K₂S₂O₈–Mn²⁺–luminol system was coupled for further signal amplification. Under the optimized conditions, the chemiluminescent intensity is proportional to target Salmonella over the range of 5–1038 cfu mL^?1 with a detection limit of 5 cfu mL^?1. The relative standard deviation for 11 measurements of about 50–100 cfu/mL target Salmonella is 4.7%. The proposed method was successfully applied to measure Salmonella in food samples and the results are identical to those of the offical standard method of China. These offer us a more powerful tool for ultrasensitive assay of foodborne pathogens. Copyright © 2010 John Wiley & Son, Ltd.     

Capillary electrophoretic enzyme immunoassay with electrochemical detection using a noncompetitive format

A capillary electrophoretic enzyme immunoassay with electrochemical detection (CE-EIA-ED) using a noncompetitive format has been developed. In this method, antigen (Ag) reacts with an excess amount of horseradish peroxidase (HRP)-labeled antibody (Ab*). The free Ab* and the bound Ag-Ab* complex produced in the solution are separated by capillary zone electrophoresis in a separation capillary. Then they catalyze enzyme substrate 3,3',5,5'-tetramethylbenzide (TMB(Red)) and H(2)O(2) in a reaction capillary following the separation capillary. The reaction product, TMB(Ox), can be determined using amperometric detection on a carbon fiber microdisk bundle electrode at the outlet of the reaction capillary. Due to the amplification of the enzyme, a significant amount of TMB(Ox) can be produced for detection. Therefore, the limit of detection (LOD) of CE-EIA-ED is very low. A tumor marker (CA15-3) was used as a model, in order to test the method. The concentration LOD of CA15-3 is 0.024 U/ml, which corresponds to a mass detection limit of 1.3x10(-7) U.     

Simultaneous immobilization of glucose oxidase on the surface and cavity of hollow gold nanospheres as labels for highly sensitive electrochemical immunoassay of tumor marker

A novel tracer, glucose oxidase (GOD)-functionalized hollow gold nanospheres encapsulating glucose oxidase (Au(shell)@GOD), was designed to label the ferrocenemonocarboxylic-grafted secondary antibodies (Fc@Ab(2)) for highly sensitive detection of tumor marker using carboxyl group functionalized multiwall carbon nanotubes as platform. Initially, Au(shell)@GOD was synthesized specially by reverse micelle approach, and then the labeling of antibody and the preparation of GOD-functionalized Au(shell)@GOD were performed by one-pot assembly of Fc@Ab(2) and GOD on the surface of Au(shell)@GOD. The ferrocene used to label antibodies acted as a mediator of electron transfer between GOD and electrode surface. The high-content glucose oxidase in the tracer (on the surface and in the cavity) could significantly amplify the amperometric signal for sandwich-type immunoassay. Using carcinoembryonic antigen (CEA) as model analyte, the designed tracer showed linear range from 0.02 to 5.0 ng mL(-1) with the detection limit down to 6.7 pg mL(-1). The assay results of serum samples with the proposed method were in an acceptable agreement with the reference values. The new protocol showed acceptable stability and reproducibility, high sensitivity, and good precision, which could provide a promising potential for clinical screening and diagnosis of tumor disease.     

Superhydrophobic surface-based magnetic electrochemical immunoassay for detection of Schistosoma japonicum antibodies

In this paper, a magnetic electrochemical immunoassay that uses a superhydrophobic surface-based analytical platform (SSAP) has been initially developed for detection of Schistosoma japonicum (Sj) antibodies (SjAb). The SSAP is fabricated by modifying the inner surfaces of plastic test tubes with superhydrophobic polycarbonate coatings that show a water contact angle up to 160° and a water rolling angle less than 5°. In a noncompetitive sandwich format, the SjAb immunoassay with magnetic particles is based on sensitive stripping voltammetry analysis coupled with the copper enhanced Au nanoparticle tag amplification. This technique is quantitatively sensitive to SjAb concentrations ranging from 2 ng ml(-1) to 15 μg ml(-1), with a detection limit of ～1.3 ngml(-1). Moreover, the results of assaying several serum specimens prove its feasibility of practical applications. The self-cleaning SSAP can be reused, because no aqueous samples reagents or contaminate the superhydrophobic polycarbonate during the experiments. The comparison study additionally demonstrates that the SSAP-based magnetic electrochemical immunoassays can offer preferable advantages over the existing approaches for SjAb detection, in terms of volumes of samples and reagents, assay time, and detection limit.     

GoldMag nanocomposite-functionalized graphene sensing platform for one-step electrochemical immunoassay of alpha-fetoprotein

A new flow-through electrochemical immunosensor was designed for sensitive detection of alpha-fetoprotein (AFP) in human serum by using nanogold-functionalized magnetic graphene nanosheets as immunosensing probes. Initially, amino functionalized magnetic beads were covalently immobilized on the surface of graphene oxide nanosheets (MGPs), then nanogold particles were adsorbed on the amino groups of the MGPs to construct GoldMag nanocomposites functionalized graphene nanosheets (GMGPs), and then horseradish peroxidase-anti-AFP conjugates (HRP-anti-AFP) were assembled onto the surface of nanogold particles (bio-GMGP). With the aid of an external magnet, the formed bio-GMGPs were attached onto the base electrode in the flow system. With a non-competitive immunoassay format, the injected sample containing AFP antigens was produced transparent immunoaffinity reaction with the immobilized HRP-anti-AFP on the bio-GMGPs. The formed immunocomplex inhibited partly the active center of HRP, and decreased the labeled HRP toward the reduction of H(2)O(2). The performance and factors influencing the performance of the immunosensor were investigated in detail. Under optimal conditions, the electrochemical immunosensor displayed a wide working range of 0.01-200 ng mL(-1) with a low detection limit (LOD) of 1.0 pg mL(-1) AFP (at 3s(B)). Intra- and inter-assay coefficients of variation (CV) were below 10%. In addition, the methodology was validated with real serum samples, receiving a good correlation with the results obtained from commercially available electrochemiluminescence automated analyzer.     

A disposable electrochemical immunosensor for flow injection immunoassay of carcinoembryonic antigen

A new simple immunoassay method for carcinoembryonic antigen (CEA) detection using a disposable immunosensor coupled with a flow injection system was developed. The immunosensor was prepared by coating CEA/colloid Au/chitosan membrane at a screen-printed carbon electrode (SPCE). Using a competitive immunoassay format, the immunosensor inserted in the flow system with an injection of sample and horseradish peroxidase (HRP)-labeled CEA antibody was used to trap the labeled antibody at room temperature for 35 min. The current response obtained from the labeled HRP to thionine-H(2)O(2) system decreased proportionally to the CEA concentration in the range of 0.50-25 ng/ml with a correlation coefficient of 0.9981 and a detection limit of 0.22 ng/ml (S/N=3). The immunoassay system could automatically control the incubation, washing and current measurement steps with good stability and acceptable accuracy. Thus, the proposed method proved its potential use in clinical immunoassay of CEA.     

Use of platinum electrodes for the electrochemical detection of bacteria.

Platinum electrodes with surface area ratios of four to one were used to detect and enumerate a variety of gram-positive and gram-negative organisms. Linear relationships were established between inoculum size and detection time. End points for platinum electrodes were similar to those obtained with a platinum-reference electrode combination. Shape of the overall response curves and length of detection times for gram-positive organisms were markedly different than those for the majority of gram-negative species. Platinum electrodes are better than the platinum-reference electrode combination because of cost, ease of handling, and clearer definition of the end point.     

Bi-enzyme functionlized hollow PtCo nanochains as labels for an electrochemical aptasensor

In this work, a new signal amplification strategy based on hollow PtCo nanochains (HPtCoNCs) functionalized by bi-enzyme-horseradish peroxidase mimicking DNAzyme (HRP-DNAzyme) and glucose oxidase (GOD), as well as ferrocene-labeled secondary thrombin aptamer (Fc-TBA 2), is developed to construct a highly sensitive electrochemical aptasensor. The HRP-DNAzyme contains a special G-quadruplex structure with an intercalated hemin. With the surface area enlarged by HPtCoNCs, the amount of immobilized Fc-TBA 2, hemin and GOD can be enhanced. Under the enzyme catalysis of GOD, d-glucose is rapidly oxidized into gluconic acid accompanying with the generation of H?O?, which is further electrocatalyzed by Pt nanoparticles and HPR-DNAzyme to improve the electrochemical signal of Fc. With several amplification factors mentioned above, a wide linear ranged from 0.001 to 30 nM is acquired with a relatively low detection limit of 0.39 pM for thrombin. The present work demonstrates that using HPtCoNCs as labels is a promising way to amplify the analysis signal and improve the sensitivity of aptasensors.     

Enhanced immunoassay sensitivity using chemiluminescent acridinium esters with increased light output

Chemiluminescent acridinium ester labels are widely used in clinical diagnostics especially in automated immunochemistry analyzers such as Siemens Healthcare Diagnostics’ ADVIA Centaur® systems. Although, chemiluminescence from acridinium compounds was discovered more than 50 years ago, details regarding the excitation process are still not well understood particularly in relation to acridinium structure and overall light output. Herein, we report an empirical study that correlates the presence of electron-donating methoxy groups at C-2 and/or C-7 in the acridinium ring with increased light output. We further demonstrate that these high light output labels can be combined with hydrophilic functional groups such as hexa(ethylene)glycol to generate unique acridinium esters that are stable and are useful in improving immunoassay sensitivity for both competitive and sandwich automated immunoassays.     

Biomolecules/gold nanowires-doped sol-gel film for label-free electrochemical immunoassay of testosterone

A direct, rapid, and label-free electrochemical immunoassay method for testosterone has been described based on encapsulating testosterone antibody into polyvinyl butyral sol–gel film doped with gold nanowires. Gold nanowires prepared by using nanopore polycarbonate membrane were used to conjugate testosterone antibody onto the probe surface. The presence of gold nanowires provided a biocompatible microenvironment for biomolecules, greatly amplified the immobilized amount of biomolecules on the electrode surface, and improved the sensitivity of the immunosensor. In comparison with gold nanoparticle-conjugating probe, the gold nanowire-functionalized probe could avoid the leakage of biomolecules from the composite film, and enhanced the stability of the sensor. The performance and factors influencing the performance of the resulting immunosensor were investigated in detail. Under optimal conditions, the developed immunosensor exhibited a good linear relationship with testosterone ranging from 1.2 to 83.5 ng mL^− 1 with a detection limit of 0.1 ng mL^− 1 (at 3δ). Moreover, the proposed immunosensor exhibited high sensitivity, good reproducibility and long-term stability. The as-prepared immunosensors were used to analyze testosterone in human serum specimens. Analytical results suggest that the developed immunoassay has a promising alternative approach for detecting testosterone in the clinical diagnosis. Compared with the conventional ELISAs, the proposed immunoassay method was simple and rapid without multiple labeling and separation steps. Importantly, the route provides an alternative approach to incorporate gold nanowires into the solid matrix for biosensing application.     

Trehalose analysis using ion exchange HPLC coupled with electrochemical detection

A method has been developed to detect trehalose in yeast extracts down to 10mM. A crude yeast extract was prepared by rapidly heating filtered cells to 95°C. Trehalose was separated using an ion exchange HPLC connected to an electrochemical detector.     

Multiple labeling of antibodies with dye/DNA conjugate for sensitivity improvement in fluorescence immunoassay

Fluorescence immunoassays are widely used in life science research, medical diagnostics, and environmental monitoring due to the intrinsically high specificity, simplicity, and versatility of immunoassays, as well as the availability of a large variety of fluorescent labeling molecules. However, the sensitivity needs to be improved to meet the ever-increasing demand in the new proteomics era. Here, we report a simple method of attaching multiple fluorescent labels on an antibody with a dye/DNA conjugate to increase the immunoassay sensitivity. In the work, mouse IgG adsorbed on the surface of a 96-well plate was detected by its immunoreaction with biotinylated goat anti-mouse antibody. A 30 base pair double-stranded oligonucleotide terminated with biotin was attached to the antibody through the biotin/streptavidin/biotin interaction. Multiple labeling of the antibody was achieved after a fluorescent DNA probe was added into the solution and bound to the oligonucleotide at high ratios. By comparison with fluorescein-labeled streptavidin, the assay with the dye/DNA label produced up to 10-fold increase in fluorescence intensity, and consequently about 10-fold lower detection limit. The multiple labeling method uses readily available reagents, and is simple to implement. Further sensitivity improvement can be obtained by using longer DNAs for antibody labeling, which can incorporate more fluorescent dyes on each DNA.     

Label-free electrochemical aptasensor for thrombin detection with platinum nanoparticles and blocking reagent horseradish peroxidase as enhancers

A sensitive label-free electrochemical aptasensor was successfully fabricated for thrombin detection with platinum nanoparticles (Pt) and blocking reagent horseradish peroxidase (HRP) as enhancers. A Nafion?-graphene-coated electrode was first modified with an electrochemical probe of methylene blue (MB) through electrostatic interaction. Then Pt was electrodeposited onto an electrode for immobilization of the thrombin aptamer (TBA). Subsequently, HRP served as blocking reagent instead of bovine serum albumin (BSA). With the synergistic effect between Pt and HRP, the prepared aptasensor showed a superior catalytic efficiency toward H(2) O(2) in the presence of MB. After the combination of target thrombin on electrode surface, the TBA-thrombin complex made a barrier for electrocatalysis of Pt and HRP and inhibited the electrotransfer, resulting in a greater decrease in MB signals. As a result, the proposed approach showed a high sensitivity and a much wider linearity to thrombin in the range from 0.005 to 50 nM with a detection limit of 1 pM.     

Optimized ferrocene-functionalized ZnO nanorods for signal amplification in electrochemical immunoassay of Escherichia coli

A novel amplified electrochemical immunoassay based on ferrocene (Fc)-functionalized ZnO nanorods (NRs) was developed in the present work. The detection antibody ((d)Ab) and Fc were immobilized onto the surface of ZnO NRs, denoted as {(d)Ab-ZnO-Fc} bioconjugates. The amount of (d)Ab and Fc in the bioconjugates was investigated using the copper reduction/bicinchoninic acid reaction (BCA protein assay) and inductive coupled plasma-atomic emission spectroscopy (ICP-AES), respectively. Greatly amplified signal was achieved in the sandwich-type immunoassay when (d)Ab and Fc linked to ZnO NRs at a proper ratio. Using Escherichia coli (E. coli) as a model antigen, the designed immunoassay showed an excellent analytical performance, and exhibited a wide dynamic response range of E. coli concentration from 10(2) to 10(6)cfu/mL with a detection limit of 50 cfu/mL (S/N=3). By introducing a pre-enrichment step, the detection of 5 cfu/10 mL E. coli in hospital sewage water was realized. This proposed signal amplification strategy was promising and could be easily extended to monitor other biorecognition events.