Culm strength of barley : correlation among maximum bending stress, cell wall dimensions, and cellulose content

Grass culms are known to differ in breaking strength, but there is little physicochemical data to explain the response. The fourth internode of four brittle and two nonbrittle barley (Hordeum vulgare L.) strains were used for physical and chemical studies of culm strength. Inner and outer culm diameters of brittle strains (3.6 ± 0.2 and 5.0 ± 0.1 millimeters) were not significantly different from those of nonbrittle strains (3.9 ± 0.2 and 5.2 ± 0.2 millimeters). Maximum bending stress, at which the culm was broken, was 192 ± 34 g/mm² for brittle and 490 ± 38 g/mm² for nonbrittle strains. Wall thickness and cell dimensions of epidermal, sclerenchyma, and parenchyma cells were measured in culm cross sections. The area of cell wall per unit cell area for each tissue was significantly correlated with the maximum bending stress (r = 0.93 for epidermis, 0.90 for sclerenchyma, and 0.84 for parenchyma). Cell walls of brittle culms had 6 to 64% as much cellulose content as those of nonbrittle culms. Maximum bending stress correlated significantly with cellulose content of the cell walls (r = 0.93), but not with the contents of noncellulosic compounds. The lower cellulose content of the brittle culm was significantly correlated with brittleness.     

Rice Brittle culm 6 encodes a dominant-negative form of CesA protein that perturbs cellulose synthesis in secondary cell walls

The brittle culm (bc) mutants of Gramineae plants having brittle skeletal structures are valuable materials for studying secondary cell walls. In contrast to other recessive bc mutants, rice Bc6 is a semi-dominant bc mutant with easily breakable plant bodies. In this study, the Bc6 gene was cloned by positional cloning. Bc6 encodes a cellulose synthase catalytic subunit, OsCesA9, and has a missense mutation in its highly conserved region. In culms of the Bc6 mutant, the proportion of cellulose was reduced by 38%, while that of hemicellulose was increased by 34%. Introduction of the semi-dominant Bc6 mutant gene into wild-type rice significantly reduced the percentage of cellulose, causing brittle phenotypes. Transmission electron microscopy analysis revealed that Bc6 mutation reduced the cell wall thickness of sclerenchymal cells in culms. In rice expressing a reporter construct, BC6 promoter activity was detected in the culms, nodes, and flowers, and was localized primarily in xylem tissues. This expression pattern was highly similar to that of BC1, which encodes a COBRA-like protein involved in cellulose synthesis in secondary cell walls in rice. These results indicate that BC6 is a secondary cell wall-specific CesA that plays an important role in proper deposition of cellulose in the secondary cell walls.     

Cell Wall Polysaccharides of Callus and Suspension-Cultured Cells from Three Cellulose-less Mutants of Barley (Hordeum vulgare L.)

Cellulose contents of fragile culms of field-grown barley mutantswere about 20% of those of corresponding isogenic normal strains,while those of calluses and suspension-cultured cells of mutantswere closer to those of corresponding normal strains. Apparently,normal barley strains did not develop secondary cell walls inculture. ⁴Deceased 2-2-1993.     

Three distinct rice cellulose synthase catalytic subunit genes required for cellulose synthesis in the secondary wall

Several brittle culm mutations of rice (Oryza sativa) causing fragility of plant tissues have been identified genetically but not characterized at a molecular level. We show here that the genes responsible for three distinct brittle mutations of rice, induced by the insertion of the endogenous retrotransposon Tos17, correspond to CesA (cellulose synthase catalytic subunit) genes, OsCesA4, OsCesA7 and OsCesA9. Three CesA genes were expressed in seedlings, culms, premature panicles, and roots but not in mature leaves, and the expression profiles were almost identical among the three genes. Cellulose contents were dramatically decreased (8.9%-25.5% of the wild-type level) in the culms of null mutants of the three genes, indicating that these genes are not functionally redundant. Consistent with these results, cell walls in the cortical fiber cells were shown to be thinner in all the mutants than in wild-type plants. Based on these observations, the structure of a cellulose-synthesizing complex involved in the synthesis of the secondary cell wall is discussed.     

Rice BRITTLE CULM 3 (BC3) encodes a classical dynamin OsDRP2B essential for proper secondary cell wall synthesis

“Brittle culm” mutants found in Gramineae crops are suitable materials to study the mechanism of secondary cell wall formation. Through positional cloning, we have identified a gene responsible for the brittle culm phenotype in rice, brittle culm 3 (bc3). BC3 encodes a member of the classical dynamin protein family, a family known to function widely in membrane dynamics. The bc3 mutation resulted in reductions of 28–36% in cellulose contents in culms, leaves, and roots, while other cell wall components remained unaffected. Reductions of cell wall thickness and birefringence were observed in both fiber (sclerenchyma) and parenchymal cells, together with blurring of the wall’s layered structures. From promoter-GUS analyses, it was suggested that BC3 expression is directly correlated with active secondary cell wall synthesis. These results suggest that BC3 is tightly involved in the synthesis of cellulose and is essential for proper secondary cell wall construction.     

Agronomic and chemical evaluation of selected sorghums as sources of pulp

Nine accessions representing three sorghum species were grown at six locations in a single crop year to evaluate their potential as fibrous raw materials for pulp and papermaking. Evaluations were based on field yields, agronomic characteristics, and physical and chemical composition. Growing conditions caused considerable variation, but maturity, time of harvest, and harvesting methods also influenced composition. Preferred locations based on production of whole stalks (exclusive of roots) and of culms were Iowa, Indiana, and Georgia. The best productivity for several accessions exceeded 10 tons per acre (o.d.) for whole stalks and 6 tons per acre for culms. The mean content (for three locations) of crude cellulose in culms, ranged from 40.9 to 53.8% and of alpha cellulose from 25. 7 to 34. 7%; the level of pith ranged from 6.1 to 15.2%. Ash content in culms was 3% or less compared with 7% or more in leaves. Late-maturing PI 22983 7 and 229847 were consistently good yielders, but were chemically inferior to PI 177549 and 190579. Composition of PI 177549 was the most favorable, with a high proportion of culms to leaves and with crude cellulose content of 58.4% in culms (Georgia). In Iowa, the content of crude cellulose in culms of PI 229837 was equivalent to 3.40 tons per acre, and that of alpha cellulose was equivalent to 2.31 tons per acre. Accessions meriting further consideration are: PI 177549 (broom corn), 229837 and 229847 (kafir types), and 190579 (sorghum grass).     

Characterization and gene mapping of a brittle culm mutant of diploid wheat (Triticum monococcum L.) with irregular xylem vessels development

Diploid wheat, Triticum monococcum L. (einkorn) is an ideal plant material for wheat functional genomics. Brittle culm mutant was identified by screening of the ethyl methane sulphonate-treated M ₂ progenies of a T. monococcum accession pau14087 by banding the plant parts manually. The brittle culm mutant with drooping leaves, early flowering, reduced tiller numbers and susceptible to lodging had also exhibited brittleness in all plant parts than the wild-type parents. Comprehensive mechanical strength, histological, biochemical, scanning electron microscopy, and Fourier transform infrared spectroscopy analyses of brittle culm mutant supplemented and complemented the findings that the mutant had defective cellulose biosynthesis pathway and deposition of cell wall materials on secondary cell wall of mechanical tissues. Microscopic studies demonstrated that the decrease in cellulose contents resulted in the irregular cell wall organization in xylem vessels of leaf vascular bundles. To map the brc5 mutant, mapping populations were developed by crossing the brittle culm mutant with wild Triticum boeoticum acc. pau5088, having non-brittle characters. The brittle culm mutation was mapped between SSR markers, Xcfd39 and Xgwm126 on 5A^mL chromosome of T. monococcum, with genetic distances of 2.6 and 4.8 cM, respectively. The brc5 mutant mapped on 5A^mL, being distinct from a previously mapped brittle culm mutant in wheat, has been designated as brc5. The work on fine mapping and map-based cloning of brc5 gene regulating synthesis and deposition of cellulose on the secondary cell wall is in progress.     

插入含Ds因子的T-DNA产生的水稻脆秆突变株的遗传和分子分析

在构建由农杆菌介导的玉米Ds转座因子插入的水稻转化群体中,得到了一个茎秆等组织发生脆性突变的株系。理化指标定量测定表明,脆性株系的载荷强度和纤维素含量都比正常植株低很多,可溶性糖含量略有减少。对这个突变株的分子检测结果表明Ds因子在脆性株系中为单位点插入。检测了自前3代（T1,T2,T3)植株中T-DNA(Ds)插入与脆性表型的共分离关系。初步结果表明这个突变是T－DNA（Ds)的插入造成的,这个突变基因可能与水稻纤维素合成有关。     

DiSC (direct saccharification of culms) process for bioethanol production from rice straw

A simple process (the direct-saccharification-of-culms (DiSC) process) to produce ethanol from rice straw culms, accumulating significant amounts of soft carbohydrates (SCs: glucose, fructose, sucrose, starch and β-1,3-1,4-glucan) was developed. This study focused on fully mature culms of cv. Leafstar, containing 69.2% (w/w of dried culms) hexoses from SCs and cellulose. Commercially-available wind-separation equipment successfully prepared a culm-rich fraction with a SC recovery of 83.1% (w/w) from rice straw flakes (54.1% of total weight of rice straw). The fraction was suspended in water (20%, w/w) for starch liquefaction, and the suspension was subjected to a simultaneous saccharification and fermentation with yeast, yielding 5.6% (w/v) ethanol (86% of the theoretical yield from whole hexoses in the fraction) after 24 h fermentation. Thus, the DiSC process produced highly-concentrated ethanol from rice straw in a one vat process without any harsh thermo-chemical pretreatments.     

Different Distribution of Cellulose Synthesizing Complexes in Brittle and Non-Brittle Strains of Barley

The cause of low cellulose content in brittle mutants of barleywas studied. No differences were found in the dimension of crystallinecellulose microfibrils among mutant and normal strains by X-raydiffraction analysis. By contrast, the number of cellulose synthesizingterminal complexes (TCs) in a selected brittle mutant, Kobinkatagi4, decreased to one fifth of that in the normal strain. Thesefindings suggest that the low cellulose content in brittle mutantsof barley is caused by the decrease in the number of TCs onits plasma membrane. (Received August 1, 1998; Accepted December 21, 1998)     

Saccharification of Cellulose by Recombinant Rhodococcus opacus PD630 Strains

The noncellulolytic actinomycete Rhodococcus opacus strain PD630 is the model oleaginous prokaryote with regard to the accumulation and biosynthesis of lipids, which serve as carbon and energy storage compounds and can account for as much as 87% of the dry mass of the cell in this strain. In order to establish cellulose degradation in R. opacus PD630, we engineered strains that episomally expressed six different cellulase genes from Cellulomonas fimi ATCC 484 (cenABC, cex, cbhA) and Thermobifida fusca DSM43792 (cel6A), thereby enabling R. opacus PD630 to degrade cellulosic substrates to cellobiose. Of all the enzymes tested, five exhibited a cellulase activity toward carboxymethyl cellulose (CMC) and/or microcrystalline cellulose (MCC) as high as 0.313 ± 0.01 U · ml⁻¹, but recombinant strains also hydrolyzed cotton, birch cellulose, copy paper, and wheat straw. Cocultivations of recombinant strains expressing different cellulase genes with MCC as the substrate were carried out to identify an appropriate set of cellulases for efficient hydrolysis of cellulose by R. opacus. Based on these experiments, the multicellulase gene expression plasmid pCellulose was constructed, which enabled R. opacus PD630 to hydrolyze as much as 9.3% ± 0.6% (wt/vol) of the cellulose provided. For the direct production of lipids from birch cellulose, a two-step cocultivation experiment was carried out. In the first step, 20% (wt/vol) of the substrate was hydrolyzed by recombinant strains expressing the whole set of cellulase genes. The second step was performed by a recombinant cellobiose-utilizing strain of R. opacus PD630, which accumulated 15.1% (wt/wt) fatty acids from the cellobiose formed in the first step.     

High-density AFLP map of nonbrittle rachis 1 (<Emphasis Type="Italic">btr1</Emphasis>) and 2 (<Emphasis Type="Italic">btr2</Emphasis>) genes in barley (<Emphasis Type="Italic">Hordeum vulgare</Emphasis> L.)

Wild relatives of barley disperse their seeds at maturity by means of their brittle rachis. In cultivated barley, brittleness of the rachis was lost during domestication. Nonbrittle rachis of occidental barley lines is controlled by a single gene (btr1) on chromosome 3H. However, nonbrittle rachis of oriental barley lines is controlled by a major gene (btr2) on chromosome 3H and two quantitative trait loci on chromosomes 5HL and 7H. This result suggests multiple mutations of the genes involved in the formation of brittle rachis in oriental lines. The btr1 and btr2 loci did not recombine in the mapping population analyzed. This result agrees with the theory of tight linkage between the two loci. A high-density amplified fragment-length polymorphism (AFLP) map of the btr1/btr2 region was constructed, providing an average density of 0.08 cM/locus. A phylogenetic tree based on the AFLPs showed clear separation of occidental and oriental barley lines. Thus, barley consists of at least two lineages as far as revealed by molecular markers linked to nonbrittle rachis genes.Electronic Supplementary Material Supplementary material is available for this article at An erratum to this article can be found at     

On the cross-sectional shape of cellulose crystallites in Valonia ventricosa

The cross-sectional shape of the cellulose crystallites from the Valonia ventricosa cell wall has been investigated by electron microscopy, using negative staining and Bragg contrast in the bright field mode, with emphasis on this latter technique. The appearance of the cellulose crystallites in the electron microscope depends on their orientation. The cross-section of each cellulose crystal is almost square, with an average side of 18 nm. Sub-units corresponding to elementary fibrils were not detectable within the crystals. The differences between these results and those of earlier workers are discussed.     

Improvement of cell wall digestibility in tall fescue by <Emphasis Type="Italic">Oryza sativa</Emphasis> SECONDARY WALL NAC DOMAIN PROTEIN2 chimeric repressor

Forage digestibility is one of the most important factors in livestock performance. As grasses grow and mature, dry matter increases but they become fibrous with secondary cell wall deposition and lignification of sclerenchyma cells, and forage quality drops. In rice (Oryza sativa), the SECONDARY WALL NAC DOMAIN PROTEIN2 fused with the modified EAR-like motif repression domain (OsSWN2-SRDX) reduces secondary cell wall thickening in sclerenchyma cells. We introduced OsSWN2-SRDX under the control of the OsSWN1 promoter into tall fescue (Festuca arundinacea Schreb.) to increase cell wall digestibility. Of 23 transgenic plants expressing OsSWN2-SRDX, nine had brittle internodes that were easily broken by bending. Their secondary cell walls were significantly thinner than those of the wild type in interfascicular fibers of internodes and in cortical fiber cells between leaf epidermal cells and vascular bundles. The dry matter digestibility increased by 11.8% in stems and by 6.8% in leaves compared with the wild type, and therefore forage quality was improved. In stem interfascicular fibers, acid detergent fiber and acid insoluble lignin were greatly reduced. Thus, the reduction of indigestible fiber composed of cellulose and lignin increased the degradability of sclerenchyma cell walls. OsSWN2-SRDX plants offer great potential in the genetic improvement of forage digestibility.     

Genetic mapping of mitochondrial markers by recombinational analysis in Chlamydomonas reinhardtii

The mitochondrial genome of Chlamydomonas reinhardtii is a 15.8 kb linear DNA molecule present in multiple copies. In crosses, the meiotic products only inherit the mitochondrial genome of the mating type minus (paternal) parent. In contrast mitotic zygotes transmit maternal and paternal mitochondrial DNA copies to their diploid progeny and recombinational events between molecules of both origins frequently occur. Six mitochondrial mutants unable to grow in the dark (dk^? mutants) were crossed in various combinations and the percentages of wild-type dk⁺ recombinants were determined in mitotic zygotes when all progeny cells had become homoplasmic for the mitochondrial genome. In crosses between strains mutated in the COB (apocytochrome ) gene and strains mutated in the COX1 (subunit 1 of cytochrome oxidase) gene, the frequency of recombination was 13.7% (± 3.2%). The corresponding physical distance between the mutation sites was 4.3 kb. In crosses between strains carrying mutations separated by about 20 bp, a recombinational frequency of 0.04% (± 0.02%) was found. Two other mutants not yet characterized at the molecular level were also used for recombinational studies. From these data, a linear genetic map of the mitochondrial genome could be drawn. This map is consistent with the positions of the mutation sites on the mitochondrial DNA molecule and thereby validates the method used to generate the map. The frequency of recombination per physical distance unit (3.2% ± 0.7% per kilobase) is compared with those obtained for other organellar genomes in yeasts and Chlamydomonas.     

Characterising the morphological characters and carbohydrate metabolism of oat culms and their association with lodging resistance

• Lodging resistance can be improved by enhancing the mechanical strength of culms, and culm carbohydrates could improve this mechanical strength. Culm carbohydrates can regulate development of the culm and affect its toughness.
• The present study determines the relationship between lodging and carbohydrate content in oat culms. Field experiments were conducted in alpine regions in 2017 and 2018 using three oat varieties with different lodging resistance. Lodging‐related morphological characteristics were directly determined and culm carbohydrate content and enzyme activity related to cellulose synthesis and sucrose metabolism were evaluated with ultraviolet spectrophotometry.
• Results showed that the lower the gravity height or the lower ratio of gravity height to plant height, the stronger the lodging resistance of the varieties. Higher culm nonstructural (NSC) and structural (SC) carbohydrate content contributed to the ability of culms to resist lodging, especially the content of cellulose and sucrose. PCA showed that sucrose metabolism and SC content were closely related to lodging resistance. Correlation analysis showed that the lodging index (LI) was significantly negatively correlated with NSC. Sucrose content was highly and significantly positively correlated with NSC. Additionally, the activities of sucrose phosphate synthase (SPS) and sucrose synthase (SS) were highly and significantly positively correlated with sucrose and cellulose content.
• The relationship between field characters and oat lodging, as well as the regulatory mechanism of carbohydrate content on lodging resistance of the culm are discussed.

     

Inactivation of shiga toxin-producing Escherichia coli (STEC) and degradation and removal of cellulose from STEC surfaces by using selected enzymatic and chemical treatments

Some Shiga toxin-producing Escherichia coli (STEC) strains produce extracellular cellulose, a long polymer of glucose with β-1-4 glycosidic bonds. This study evaluated the efficacies of selected enzymatic and chemical treatments in inactivating STEC and degrading/removing the cellulose on STEC surfaces. Six cellulose-producing STEC strains were treated with cellulase (0.51 to 3.83 U/15 ml), acetic and lactic acids (2 and 4%), as well as an acidic and alkaline sanitizer (manufacturers' recommended concentrations) under appropriate conditions. Following each treatment, residual amounts of cellulose and surviving populations of STEC were determined. Treatments with acetic and lactic acids significantly (P < 0.05) reduced the populations of STEC, and those with lactic acid also significantly decreased the amounts of cellulose on STEC. The residual amounts of cellulose on STEC positively correlated to the surviving populations of STEC after the treatments with the organic acids (r = 0.64 to 0.94), and the significance of the correlations ranged from 83 to 99%. Treatments with cellulase and the sanitizers both degraded cellulose. However, treatments with cellulase had no influence on the fate of STEC, and those with the sanitizers reduced STEC cell populations to undetectable levels. Thus, the correlations between the residual amounts of cellulose and the surviving populations of STEC caused by these two treatments were not observed. The results suggest that the selected enzymatic and chemical agents degraded and removed the cellulose on STEC surfaces, and the treatments with organic acids and sanitizers also inactivated STEC cells. The amounts of cellulose produced by STEC strains appear to affect their susceptibilities to certain sanitizing treatments.     

Sporotrichum thermophile Growth, Cellulose Degradation, and Cellulase Activity

The activity of components of the extracellular cellulase system of the thermophilic fungus Sporotrichum thermophile showed appreciable differences between strains; β-glucosidase (EC 3.2.1.21) was the most variable component. Although its endoglucanase (EC 3.2.1.4) and exoglucanase (EC 3.2.1.91) activities were markedly lower, S. thermophile degraded cellulose faster than Trichoderma reesei. The production of β-glucosidase lagged behind that of endoglucanase and exoglucanase. The latter activities were produced during active growth. When growth was inhibited by cycloheximide treatment, the hydrolysis of cellulose was lower than in the control in spite of the presence of both endoglucanase and exoglucanase activities in the culture medium. Degradation of cellulose was a growth-associated process, with cellulase preparations hydrolyzing cellulose only to a limited extent. The growth rate and cell density of S. thermophile were similar in media containing cellulose or glucose. A distinctive feature of fungal development in media incorporating cellulose or lactose (inducers of cellulase activity) was the rapid differentiation of reproductive units and autolysis of hyphal cells to liberate propagules which were capable of renewing growth immediately.     

Structure of the Primary Cell Walls of Suspension-Cultured Rosa glauca Cells: I. Polysaccharides Associated with Cellulose

Cell walls of suspension-cultured cells of Rosa glauca were fractionated by two different extraction procedures. The first involved a stepwise fractionation scheme based on alkaline extraction. The second took advantage of the powerful cellulose solvent system N-methylmorpholine N-oxide/dimethyl sulfoxide which is capable of solubilizing whole cell walls. From the analytical composition of each solubilized fraction and of the corresponding residues, the fate of each type of cell wall polysaccharide constituent was followed at each step of the extraction scheme and the mode of action of the extractant was interpreted. Although the two fractionation procedures were very different, they yielded very similar cellulosic complex residues and extracts, thus delimiting two blocks of polysaccharides in the cell wall. The cellulose residues still comprised uronic acid-containing polysaccharides and hemicelluloses in association with cellulose. Graded acid hydrolysis provided evidence for the central role of a homogalacturonan core interconnecting xyloglucans and arabinogalactans. A tentative model showing the possible interaction existing between the constituent polysaccharides still associated to cellulose after alkaline extraction is presented. Hydrogen bonding between xyloglucan and cellulose is confirmed, and glycosidic linkages between xyloglucans and pectic polymers are suggested.