Ring Gap Resonance Modes on Disk/Film Coupling System Caused by Strong Plasmon Interaction

Ring modes with large wave vectors cannot be easily excited on a single disk by the plane wave illumination with the polarization parallel to the disk interface. In this work, we show that special antisymmetric ring gap modes on the surface of the disk in close proximity to the metallic thin film can be excited in the visible light region of the electromagnetic spectrum. In the presence of the film, the strong plasmon interaction between disk and film causes ring gap modes to have lower energies and be more easily excited. We apply the plasmon hybridization method to illustrate the ring gap modes arising from the interaction between the localized disk plasmons and the continuum surface plasmons. The calculated hybridization data show good agreement with the results of finite element simulations. The excitation of ring gap modes provides further insight into the strong coupling of plasmons and the design of novel nanostructures.

     

Impact of C60 Adsorption on Surface Plasmon Polaritons on Self-Assembled Ag(111) Islands on Si(111)

The influence of C₆₀ adsorption on the properties of surface plasmon polaritons on small Ag islands is discussed. Under illumination with UV light as well as under illumination with femtosecond laser pulses, a decrease of the photoemission yield with increasing C₆₀ coverage is observed. With angular resolved measurements, changes of the band structure during deposition are studied. Based on these experiments, an increase of the work function with increasing coverage is measured. In two photon photoemission, the surface plasmons are imaged as a periodic moiré pattern, the wavelength of which changes because of a modified effective surface dielectric function. Our findings imply that the wavelength of the plasmon wave becomes shorter as a result. Finally, a decrease of the intensity of the moiré pattern maxima compared with the intensity of the first maximum with increasing C₆₀ coverage has been observed. Accordingly, the damping of the plasmon wave becomes stronger.     

Unidirectional Surface Plasmon Polariton Excitation on Single Slit with Oblique Backside Illumination

We have theoretically investigated the unidirectional surface plasmon polariton (SPP) excitation on single slits with oblique backside illumination. An aperture diffraction method is devised, from which the conditions of slit width and beam illumination angle for the unidirectional SPP excitation are formulated analytically. The derived unidirectional conditions are validated with vectorial electromagnetic simulation using the rigorous coupled wave analysis.     

Subwavelength-Sized Plasmonic Structures for Wide-Field Optical Microscopic Imaging with Super-Resolution

We propose a wide-field super-resolved optical microscopic imaging technique based on subwavelength slit arrays embedded in a thin silver film to generate surface plasmon (SP) standing wave interference patterns. These fringes carrying high spatial frequency information serve as excitation profiles to excite the nanoscale fluorescence objects. The super-resolved fluorescence density distribution is reconstructed from a weight sum of a series of fluorescence images with differently phase-shifted SP standing wave illumination. Simulation and experimental results show that the lateral resolution of the reconstructed fluorescence density image is enhanced by 0.28?λ _SP in two dimensions, which is twofold better than that of conventional high numerical aperture fluorescence microscopy. This technique benefits from a grating coupler to offer a simple way for the generation and phase shift of SP standing wave excitation profiles in two dimensions. The flat configuration, wide field, and noninvasive nature make this approach suitable for real-time analyzing the fine details of bio-samples in biochip applications.     

Sensing Nanometer Depth of Focused Optical Fields with Scanning Surface Plasmon Microscopy

Evanescent wave imaging has been developed in the past decades for discriminating sub-micronic structures confined on a planar surface from bulk medium. However, this imaging method assumes a correct orientation of the objective lens versus the normal of the sample plane (null tilt angle) for a uniform evanescent illumination of the sample. Here, we propose to use the $V(Z)$ response of a heterodyne scanning microscope coupled to a high numerical aperture lens to compensate the tilt, scanning images in three dimensions. This method can be used in standard glass to dielectric reflection regime or coupled to surface plasmon resonance. We show that in the second case, we can afford tilt angle corrections better than 10 $^{-4}$ radian. As an illustration, this method is applied to a patterned surface with nanometer-squared silica islets and to adsorbed nanoparticles.     

Simultaneous Excitation of Surface Plasmon Polaritons on Both Interfaces in an Asymmetric Dielectric-Metal Corrugated Structure

The simultaneous excitation of plasmon polaritons on both surfaces of metal film was studied for asymmetric dielectric-metal-dielectric corrugated structures. Due to the small resonant absorption of the incident light on the transmission side of the structure, we investigated the enhancement of the surface plasmon polaritons on the mentioned side by controlling the structure parameters. When the illuminate light changes from normal incidence to non-normal incidence, the resonant absorption peak splits into a doublet. The simultaneous excitation of surface plasmon polaritons on both surfaces of the metal film can be achieved by controlling the incident angle. Since the wave vector matching condition is not satisfied, there is no coupling between the plasmon polaritons modes on the two surfaces of the corrugated metallic film. The excitation and control of the non-coupled surface plasmon polartions simultaneously propagating on the different interfaces of one metallic film have potential applications for designing novel compact and tunable nano-photonic devices at visible frequency.     

Direct Observation of Surface Plasmon Polariton Propagation and Interference by Time-Resolved Imaging in Normal-Incidence Two Photon Photoemission Microscopy

Plasmonics - Time-resolved imaging of the propagation and interference of isolated ultrashort surface plasmon polariton wave packets is demonstrated using two photon photoemission microscopy. The...     

Far-Field Raman Imaging of Short-Wavelength Particle Plasmons on Gold Nanorods

The surface plasmon fields of gold nanorods with a diameter of 100 nm and lengths of 1–5 m are imaged by using far-field Raman scattering of methylene blue adsorbed on the rods. When optically exciting the nanorods under total internal reflection with wave vector and electric field vector orientations along the rod axis, the plasmon field intensity along this axis is observed to be periodically modulated. This modulation is attributable to a beating of the exciting light wave and the nanorod plasmon mode. The plasmon wavelength deduced from the beat frequency is 379 nm, which is considerably smaller than the exciting laser wavelength of 647 nm. In general, Raman imaging is shown to be a powerful technique to probe local plasmon fields using far-field spectroscopy.     

Buried Effects of Surface Plasmon Resonance Modes for Periodic Metal–Dielectric Nanostructures Consisting of Coupled Spherical Metal Nanoparticles with Cylindrical Pore Filled with a Dielectric

We numerically investigate the buried effects of surface plasmon resonance (SPR) modes for the periodic silver-shell nanopearl dimer (PSSND) array and their solid counterparts with different buried depths in a silica substrate by means of finite element method with three-dimensional calculations. The investigated PSSND array is an important novel geometry for plasmonic metal nanoparticles (MNPs), combining the highly attractive nanoscale optical properties of both metallic nanoshell and cylindrical pore filled with a dielectric. Numerical results for SPR modes corresponding to the effects of different illumination wavelengths, absorption spectra, pore–dielectric, electric field components and total field distribution, charge density distribution, and the model of the induced local field or an applied field of the PSSND array are reported as well. It can be found that the buried MNPs with cylindrical pore filled with a dielectric in a substrate exhibit tunable SPR modes corresponding to the bonding and antibonding modes that are not observed for their solid counterparts.     

Beam-Scanning Planar Lens Based on Metal–Dielectric–Metal Waveguide Arrays

Under specific illumination conditions, periodic arrays of metal–dielectric–metal (MDM) waveguides act as uniform optical phased-array antenna where the phase of the radiating optical wave can be controlled by modifying the refractive index distribution of the dielectric material. Based on this property, we propose a planar gradient index MDM-based lens which can transform spherical waves of the transverse-magnetic surface plasmon polariton waves to plane waves with specific beam deflections by adjusting the refractive index configurations. Using numerical simulations based on two-dimensional finite-difference time-domain method, it is confirmed that beam focusing and splitting with multiple dflection angles can also be achieved.     

Imaging of Surfaces by Concurrent Surface Plasmon Resonance and Surface Plasmon Resonance-Enhanced Fluorescence

Surface plasmon resonance imaging and surface plasmon induced fluorescent are sensitive tools for surface analysis. However, existing instruments in this area have provided limited capability for concurrent detection, and may be large and expensive. We demonstrate a highly cost-effective system capable of concurrent surface plasmon resonance microscopy (SPRM) and surface plasmon resonance-enhanced fluorescence (SPRF) imaging, allowing for simultaneous monitoring of reflectivity and fluorescence from discrete spatial regions. The instrument allows for high performance imaging and quantitative measurements with surface plasmon resonance, and surface plasmon induced fluorescence, with inexpensive off-the-shelf components.     

Controllable Mode Hybridization and Interaction Within a Plasmonic Cavity Formed by Two Bimetallic Gratings

We theoretically study mode hybridization and interaction among surface plasmon polariton Bloch wave mode, Fabry–Perot cavity mode, and waveguide mode within a plasmonic cavity composed by two parallel planar bimetallic gratings. Four hybridized modes result from mode hybridization between surface plasmon polariton Bloch wave modes on the two gratings are observed. By changing the dielectric environment, mode hybridization behavior can be manipulated. Importantly, waveguide-plasmon polariton mode due to hybridization between grating supported surface plasmon polariton Bloch wave mode and cavity supported waveguide mode is observed. We demonstrate that surface plasmon polariton Bloch wave mode and Fabry–Perot cavity mode with the same mode symmetry can interact by presenting an anticrossing behavior, which can be controlled by laterally shifting one grating with respect to the other that causes a phase difference shift of the two involving modes. The proposed plasmonic cavity offers potentials for subwavelength lithography, tunable plasmonic filter, and controllable light-matter interaction.     

Plasmonic Perfect Absorbers for Biosensing Applications

We present a theoretical modal investigation of plasmonic perfect absorbers (PPAs) based on the localized surface plasmon resonance (LSPR) for biosensing applications. We design the PPA geometry with a layer of periodic metallic nanoparticles on one side of a dielectric substrate and a single metallic layer on the opposite side. The electromagnetic (EM) fields confine partly in the surrounding medium above the substrate and within the substrate itself. We examine the modes of the PPA geometry for a wavelength range of 600–1500 nm. The fundamental mode of the system provides perfect absorption for a wide angle of incidence 0–70°. The second-order mode shows a strong angular dependence with a sharp resonance and exhibits perfect optical absorption when the critical coupling condition for LSPR is achieved. The coupling condition depends on the size, periodicity, dielectric spacer, and the surrounding material of the system. The strong dependence on the surrounding material makes it a promising candidate for biosensing applications. We introduce a novel approach to investigate the angular dependence of the refractive index change for the PPA system. This novel technique contributes the significant attributes of the LSPR sensors, can be used for any required resonance wavelength depending on geometric design, and it also provides sensitivity analogous to the standard surface plasmon resonance (SPR) biosensors.     

Mode Controlling of Surface Plasmon Polaritons by Geometric Phases

Metasurfaces are made of two-dimensional arrays of subwavelength nanostructures that form a spatially varying optical response, to control the wave fronts of optical waves. As the feature size of its constituent materials is nanoscale, investigation of the light-nanostructure interactions in the near field is critical for understanding the novel properties of metasurfaces. Here, we used a scanning near-field optical microscope (SNOM) to observe the near-field distribution of surface plasmon polaritons (SPPs) from a ring-shaped metasurface under illumination of circularly polarized light. It was found that with an additional degree of freedom of the geometric phase provided by the regularly arranged metamolecules, control over the near-field interference of the SPPs can be achieved, which is governed by the metasurface geometric symmetry that can be tuned by its topological charge. Meanwhile, the planar chiral character of the metamolecules exerts a deep influence on the near-field interference patterns. Our results can pave the way for active control of SPP propagation in near fields and have potential applications in highly integrated optical communication systems.

     

Tunable Goos-Hänchen Shift of Surface Plasmon Beam Due to Graphene in a Metal-Dielectric System

The tunneling of surface plasmon waves between two slabs of dielectric prisms superposed on the metal surface is studied. The prism with the incident surface plasmon wave is superposed by a stack of graphene sheets. The analytical theory is built to connect the Fermi energy of graphene with the Goos-Hänchen shift of the transmitted surface plasmon waves. The obtained results may be useful for developing integral switching devices on the basis of surface plasmon polaritons.

     

Surface Plasmon Polariton Propagation at the Interface of a Metal and an Ambichiral Nanostructured Medium

The propagation of a surface plasmon polariton wave at the interface of a metal and an ambichiral nanostructured medium was theoretically investigated in the Kretschmann configuration using transfer matrix method. The dependence of optical absorption linear polarization on structural parameters was reported. The results were compared with those obtained from the interface of a metal and a chiral dielectric medium as a reference structure. We found that multiple plasmon modes are excited at the interface of metal and ambichiral dielectric medium. Our calculations revealed that there exist five plasmon modes for chiral, trigonal, and tetragonal structures; three plasmon modes for pentagonal structure; two plasmon modes for hexagonal structure; and one plasmon mode for dodecagonal structure that propagate with different phase speeds. The obtained results showed that only one plasmon mode occurs at all pitches, while other modes exist at some of the pitches of anisotropic chiral and ambichiral dielectric mediums. The time-averaged Poynting vector versus the thickness of metal film confirmed that the energy of photons of incident light is transferred to surface plasmon polariton quasiparticles and the surface plasmon polariton wave is localized at the interface of metal and ambichiral dielectric medium.     

Automatic system for 3D reconstruction of the chick eye based on digital photographs

The geometry of anatomical specimens is very complex and accurate 3D reconstruction is important for morphological studies, finite element analysis (FEA) and rapid prototyping. Although magnetic resonance imaging, computed tomography and laser scanners can be used for reconstructing biological structures, the cost of the equipment is fairly high and specialised technicians are required to operate the equipment, making such approaches limiting in terms of accessibility. In this paper, a novel automatic system for 3D surface reconstruction of the chick eye from digital photographs of a serially sectioned specimen is presented as a potential cost-effective and practical alternative. The system is designed to allow for automatic detection of the external surface of the chick eye. Automatic alignment of the photographs is performed using a combination of coloured markers and an algorithm based on complex phase order likelihood that is robust to noise and illumination variations. Automatic segmentation of the external boundaries of the eye from the aligned photographs is performed using a novel level-set segmentation approach based on a complex phase order energy functional. The extracted boundaries are sampled to construct a 3D point cloud, and a combination of Delaunay triangulation and subdivision surfaces is employed to construct the final triangular mesh. Experimental results using digital photographs of the chick eye show that the proposed system is capable of producing accurate 3D reconstructions of the external surface of the eye. The 3D model geometry is similar to a real chick eye and could be used for morphological studies and FEA.     

Analysis of protein interactions on protein arrays by a novel spectral surface plasmon resonance imaging

We presented a novel surface plasmon resonance (SPR) imaging method for analysis of protein arrays based on a wavelength interrogation-based SPR biosensor. The spectral imaging was performed by the combination of position control and resonance wavelengths calculated from SPR reflectivity spectra. The imaging method was evaluated by analyzing interactions of glutathione S-transferase-fusion proteins with their antibodies. Antigen-antibody interactions were successfully analyzed on glutathione S-transferase-fusion protein arrays by using the spectral imaging method, and the results were confirmed by a parallel analysis using a previously used spectral SPR biosensor based on wavelength interrogation. Specific binding of anti-Rac1 and anti-RhoA to Rac1 and RhoA on the protein arrays was qualitatively and quantitatively analyzed by the spectral SPR imaging. Thus, it was suggested that the novel spectral SPR imaging was a useful tool for the high-throughput analysis of protein-protein interactions on protein arrays.     

Surface Plasmon Resonance Intensification by Cavity-Ring Plasma Structure in the Giga-Hertz Regime

In this paper, we propose a novel sub-wavelength plasma structure that can effectively enhance surface plasmon resonance (SPR) to achieve a significant local field. On the basis of a plasma ring structure, we add a slit and two thin plasma layers, working as a metal-insulator-metal (MIM) waveguide at a specific incident wave frequency and generate the Fabry-Perot resonance (FPR). The structure thus couples the incident wave energy to the vicinity of the slit and intensifies the SPR inside the plasma ring. In addition, we also find the coupling and competing between SPR and FPR. For the coupling mode, the average field enhancement in the ring is up to a factor of 9.7. Moreover, the optimized thickness of the plasma layer is much thinner than the skin depth of the plasma to ensure the incident wave easily entering the MIM waveguide. We further calculate the dispersion relationship of surface plasmon polaritons in the waveguide cavity. The simulation results and theoretical dispersion function are in good agreements.

     

Experimental Study on Localized Surface Plasmon Mode Hybridization in the Near and Mid Infrared

We investigate plasmon excitations within a regular grating of double-layered gold/insulator nanoparticles in the infrared and visible spectral region. Provided a flat gold film as substrate, strong coupling between the localized surface plasmon modes and their image-like excitations in the metal is observed. The interaction results in a strong red shift of the plasmon mode as well as the splitting of the modes into levels of different angular momenta, often referred to as plasmon hybridization. The diameters of the nanoparticles are designed in a way that the splitting of the resonances occurs in the spectral region between 0.1 and 1 eV, thus being accessible using an infrared microscope. Moreover, we investigated the infrared absorption signal of gratings that contain two differently sized nanoparticles. The interaction between two autonomous localized surface plasmon excitations is investigated by analyzing their crossing behavior. In contrast to the interaction between localized surface plasmons and propagating plasmon excitations which results in pronounced anticrossing, the presented structures show no interaction between two autonomous localized surface plasmons. Finally, plasmon excitations of the nanostructured surfaces in the visible spectral region are demonstrated through photographs acquired at three different illumination angles. The change in color of the gratings demonstrates the complex interaction between propagating and localized surface plasmon modes.