Hydrolysis of butteroil by immobilized lipase using a hollow-fiber reactor: IV. Effects of temperature

A lipase from Aspergillus niger, immobilized by adsorption on microporous polypropylene hollow fibers, was used to effect the hydrolysis of the glycerides of melted butterfat at pH. 7.0 at 40, 50, 55, and 60 degrees C. Mcllvane buffer was pumped upward through the lumen, and melted butterfat was pumped upward through the shell side of a hollow fiber reactor. Nonlinear regression methods were employed to determine the kinetic parameters of models based on combinations of three nested rate expressions for the hydrolysis reaction with three nested rate expressions for thermal deactivation of the enzyme. A rate expression containing four lumped parameters is sufficient to model the release of free fatty acids as a function of reactor space time and time elapsed after immobilization. Nonlinear regression methods were also employed in global fits of the data to rate expressions containing an explicit dependence on temperature. For the reaction conditions used in this research, a 14-parameter rate expression is necessary to accurately model the overall release of free fatty acids as a continuous function of the absolute temperature, initial substrate concentrations, reactor space time, and time elapsed after immobilization of the lipase.     

Biotechnology for the production of nutraceuticals enriched in conjugated linoleic acid: I. Uniresponse kinetics of the hydrolysis of corn oil by a Pseudomonas sp. lipase immobilized in a hollow fiber reactor

The kinetics of the hydrolysis of corn oil in the presence of a lipase from Pseudomonas sp. immobilized within the walls of a hollow fiber reactor can be modeled in terms of a three‐parameter rate expression. This rate expression consists of the product of a two‐parameter rate expression for the hydrolysis reaction itself (which is of the general Michaelis–Menten form) and a first‐order rate expression for deactivation of the enzyme. Optimum operating conditions correspond to 30°C and buffer pH values of 7.0 during both immobilization of the enzyme and the hydrolysis reaction. Under these conditions, the total fatty acid concentration in the effluent oil stream for a fluid residence time of 4 h is approximately 1.6 M. This concentration corresponds to hydrolysis of approximately 50% of the glyceride bonds present in the feedstock corn oil. The fatty acid of primary interest in the effluent stream is linoleic acid. © 1999 John Wiley & Sons, Inc. Biotechnol Bioeng 64: 568–579, 1999.     

An Insight into the Active Site of Pseudomonas Fluorecens (P. cepacia) Lipase to Define the Stereochemical Demand for the Transesterification in Organic Solvents

The Pseudomonas fluorescens lipase-catalyzed transesterification of 2-methyl alkanols 1 and the 2-substituted oxiranemethanols 2 with vinyl acetate in organic solvents has been studied and the results discussed in terms of steric and electronic demand within the recently postulated models of the lipase active site.     

Production and properties of an alkaline,thermophilic lipase from <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> NS2W

Eighteen bacterial strains were isolated from soil samples and screened for alkaline, thermophilic lipase production. Pseudomonas fluorescens NS2W was selected and its production of lipase was optimized in shake flasks using a statistical experimental design. Cell growth and lipase production were studied in shake flasks and in a 1-l fermenter in the optimized medium. Maximum lipase yields were 69.7 and 68.7 U ml⁻¹, respectively. The optimized medium resulted in about a five-fold increase in the enzyme production, compared to that obtained in the basal medium. The lipase had an optimal activity at pH 9.0 and was stable over a wide pH range of 3–11 with more than 70% activity retention. The lipase had an optimal activity at 55°C and was stable up to 60°C with more than 70% activity retention for at least 2 h. Journal of Industrial Microbiology & Biotechnology (2002) 28, 344–348 DOI: 10.1038/sj/jim/7000254 Received 06 September 2001/ Accepted in revised form 15 March 2002     

Optimized conditions forin situ immobilization of lipase in aldehyde-silica packed columns

Optimal conditions for thein situ immobilization of lipase in aldehyde-silica packed columns,via reductive amination, were investigated. A reactant mixture, containing lipase and sodium borohydride (NaCBH), was recirculated through an aldehyde-silica packed column, such that the covalent bonding of the lipase,via amination between the amine group of the enzyme and the aldehyde terminal of the silica, and the reduction of the resulting imine group by NaCBH, could occur inside the bed,in situ. Mobile phase conditions in the ranges of pH 7.0∼7.8, temperatures between 22∼28°C and flow rates from 0.8∼1.5 BV/min were found to be optimal for thein situ immobilization, which routinely resulted in an immobilization of more than 70 mg-lipase/g-silica. Also, the optimal ratio and concentration for feed reactants in thein situ immobilization: mass ratio [NaCBH]/[lipase] of 0.3, at NaCBH and lipase concentrations of 0.75 and 2.5 g/L, respectively, were found to display the best immobilization characteristics for concentrations of up to 80 mg-lipase/g-silica, which was more than a 2-fold increase in immobilization compared to that obtained by batch immobilization. For tributyrin hydrolysis, thein situ immobilized lipase displayed lower activity per unit mass of enzyme than the batch-immobilized or free lipase, while allowing more than a 45% increase in lipase activity per unit mass of silica compared to batch immobilization, because the quantity of the immobilization on silica was augmented by thein situ immobilization methodology used in this study.     

Hydrolysis of butteroil by immobilized lipase using a hollow-fiber reactor: part III. Multiresponse kinetic studies

A lipase from Aspergillus niger immobilized by adsorption on microporous, polypropylene hollow fibers was used to effect the continuous hydrolysis of the glycerides of butter oil at 40 degrees C and pH 7.0. The effluent concentrations of 10 different free fatty acid products were measured by highperformancee liquid chromatography (HPLC). Multiresponse nonlinear regression methods were used to fit the data to a multisubstrate rate expression derived from a Ping Pong Bi Bi mechanism in which the rate-controlling step is deacylation of the lipase. Thermal deactivation of the enzyme was also included in the mathematical model of reactor performance. A postulated normal distribution of v(max) with respect to the chain length of the fatty acid (with an additive correction for the degree of unsaturation) was tested for statistical significance. The model is useful for predicting the free fatty acid profile of the lipolyzed butteroil product over a wide range of flow rates.     

Use of a lipase immobilized in a membrane reactor to hydrolyze the glycerides of butteroil

A lipase from A spergillus niger, immobilized by adsorption on a microporous, polypropylene flat-sheet membrane, was used to effect the continous hydrolysis of the glycerides of melted butterfat at 35°C. For the reaction conditions used in this research, a pseudo-zero order rate expression can be used to model the kinetics of the overall hydrolysis of butterfat. Multiresponse nonlinear regression methods were employed to determine the kinetic parameters of a multisubstrate rate expression derived fro ma mechanism based on the general Michaëlis–Menten approach. For the multiresponse data taken at pH 7.0, the dependence of the maximum rate of release of each fatty acid residue of butterfat on its carbon chain length is accurately described by a skewed, bell-shaped (or Γ-type) distribution. Data taken at five different pH values were fit assuming a Dixon–Webb diprotic model for the pH dependence of the reaction rate. The thermal deactivation of the immobilized lipase obeyed first-order kinetics with a half-life of 19.9 days at 35°C. The multisubstrate model is useful for the prediction of the free fatty acid profile of lipolyzed butterfat, whereas the lumped-substrate model provides an estimate of the overall degree of hydrolysis as a function of the reactor space time.     

Methods for the immobilization of lipases and their use for ester synthesis

The lipase from Pseudomonas fluorescens was immobilized onto five different carriers: celite, octyl-silica, aminopropyl-silica, gluterdialdehyde-activated silica and Eupergit C250L. Activities and operational stabilities of the prepared catalysts were compared using the enantioselective acylation of (R,S)-1-phenylethanol by vinyl acetate as acyl donor and t-butylmethyl ether with variable water content (0.038-0.97% v/v) as reaction medium. The above carriers provide catalysts with widely different specific activities ranging from excellent 25 mmol/h mg protein (celite) to 0.07 mmol/h mg protein (glutardialdehyde-activated silica) on the lower end. The lipase immobilized onto Eupergit C250L exhibited the best operational stability among the catalysts studied. It retained 30% of its initial activity after 11 cycles of application, each with a duration between 2 and 6 h.     

Factors screening to statistical experimental design of racemic atenolol kinetic resolution via transesterification reaction in organic solvent using free Pseudomonas fluorescens lipase

As the (R )‐enantiomer of racemic atenolol has no β‐blocking activity and no lack of side effects, switching from the racemate to the (S )‐atenolol is more favorable. Transesterification of racemic atenolol using free enzymes investigated as a resource to resolve the racemate via this method is limited. Screenings of enzyme, medium, and acetyl donor were conducted first to give Pseudomonas fluorescens lipase, tetrahydrofuran, and vinyl acetate. A statistical design of the experiment was then developed using Central Composite Design on some operational factors, which resulted in the conversions of 11.70–61.91% and substrate enantiomeric excess (ee ) of 7.31–100%. The quadratic models are acceptable with R² of 95.13% (conversion) and 89.63% (ee ). The predicted values match the observed values reasonably well. Temperature, agitation speed, and substrate molar ratio factor have low effects on conversion and ee , but enzyme loading affects the responses highly. The interaction of temperature–agitation speed and temperature–substrate molar ratio show significant effects on conversion, while temperature–agitation speed, temperature–substrate molar ratio, and agitation speed–substrate molar ratio affect ee highly. Optimum conditions for the use of Pseudomonas fluorescens lipase, tetrahydrofuran, and vinyl acetate were found at 45°C, 175 rpm, 2000 U, and 1:3.6 substrate molar ratio.     

Hydrolysis of rice bran oil using immobilized lipase in a stirred batch reactor

Candida cylindracea lipase was immobilized by adsorption on acid washed glass beads. It was observed that protein loading of the support depends on the size of the particle, with smaller particle containing higher amount of protein per unit weight. Initial reaction rate linearly varied up to enzyme concentration of 17.25 U/mL. Amount of free fatty acids produced was linearly proportional up to the enzyme loading of 1650 μg/g of bead. Achievement of chemical equilibrium took longer time in the case of less protein loading. Degree of hydrolysis was found to decrease in second and third consecutive batch operations on repeated use of immobilized lipase.     

Purification and characterization of a lipase from Pseudomonas aeruginosa KKA-5 and its role in castor oil hydrolysis

An extracellular lipase (triacylglycerol acylhydrolase, EC 3.1.1.3) from Pseudomonas aeruginosa KKA-5 hydrolyzed castor oil by 90%. Purification of this castor oil-hydrolyzing lipase included ammonium sulfate precipitation and successive hydroxylapatite column chromatography. The enzyme was purified 518-fold. It was homogeneous electrophoretically and its molecular weight was estimated to be 30 kDa. The enzyme was stable up to 45°C and retained its activity in the alkaline pH range. Lipase was highly stable in the presence of aqueous organic solvents like methanol and ethanol. It was weakly inhibited in the presence of acetone. The anionic surfactant, sodium dodecyl sulfate, was inhibitory while the cationic surfactants, Triton X-100 and Tween-80 appreciably enhanced activity. Lipase was stabilized significantly by Ca²⁺. Inactivation of the enzyme by EDTA was overcome by sequential CaCl₂ treatment. This finding suggests the existence of a calcium-binding site in Pseudomonas aeruginosa KKA-5 lipase. Received 22 January 1998/ Accepted in revised form 27 April 1998     

Evaluation of cellulose-binding domain fused to a lipase for the lipase immobilization

A cellulose-binding domain (CBD) fragment of a cellulase gene of Trichoderma hazianum was fused to a lipase gene of Bacillus stearothermophilus L1 to make a gene cluster for CBD-BSL lipase. The specific activity of CBD-BSL lipase for oil hydrolysis increased by 33% after being immobilized on Avicel (microcrystalline cellulose), whereas those of CBD-BSL lipase and BSL lipase decreased by 16% and 54%, respectively, after being immobilized on silica gel. Although the loss of activity of an enzyme immobilized by adsorption has been reported previously, the loss of activity of the CBD-BSL lipase immobilized on Avicel was less than 3% after 12 h due to the irreversible binding of CBD to Avicel.     

Nitrite inhibition of denitrification by Pseudomonas fluorescens

Using a pure culture of Pseudomonas fluorescens as a model system nitrite inhibition of denitrification was studies. A mineral media with acetate and nitrate as sole electron donor and acceptor, respectively, was used. Results obtained in continuous stirred-tank reactors (CSTR) operated at pH values between 6.6 and 7.8 showed that growth inhibition depended only on the nitrite undissociated fraction concentration (nitrous acid). A mathematical model to describe this dependence is put forward. The maximum nitrous acid concentration compatible with cell growth and denitrification activity was found to be 66 mug N/L. Denitrification activity was partially associated with growth, as described by the Luedeking-Piret equation. However, when the freshly inoculated reactor was operated discontinuosly, nitrite accumulation caused growth uncoupling from denitrification activity. The authors suggest that these results can be interpreted considering that (a) nitrous acid acts as a proton uncoupler; and (b) cultures continuoulsy exposed to nitrous acid prevent the uncoupling effect but not the growth inhibition. Examination of the growth dependence on nitrite concentration at pH 7.0 showed that adapted cultures (grown on CSTR) are less sensitive to nitrous acid inhibition than the ones cultivated in batch. (c) 1995 John Wiley & Sons, Inc.     

固定化脂肪酶催化毛油合成生物柴油

本研究开发了一种用石油醚提取毛油的工艺,研究了以提取的毛油和甲醇为原料,用固定化Candida sp.99-125脂肪酶催化合成脂肪酸甲酯(FAMEs)的可行性。同时考察了磷脂对固定化酶活性、反应起始速率、固定化酶使用批次的影响以及毛油和精炼油对固定化酶使用批次等的影响。研究结果表明,用磷脂质量分数为1%的石油醚悬液浸泡过的脂肪酶比仅用石油醚浸泡过的脂肪酶初始转酯化速率显著下降。当大豆油中无磷脂时,15min时FAMEs的产率为26.2%;磷脂质量分数为5%时,FAMEs降为12.4%。当大豆油中磷脂质量分数小于1%时,固定化酶使用10个批次,FAMEs产率无明显变化。固定化脂肪酶催化石油醚浸提得到的大豆和小桐子毛油,经过10个批次反应FAMEs产率都保持在70%以上,该固定化酶直接催化毛油生产生物柴油具有良好的工业化前景。     

Functional interaction of hormone-sensitive lipase and perilipin in lipolysis

Adipocyte lipolysis is controlled by complex interactions of lipases, cofactors, and structural proteins associated with lipid droplets. Perilipin (Plin) A is a major droplet-associated protein that functions as a scaffold, both suppressing basal and facilitating cAMP-dependent protein kinase (PKA)-stimulated lipolysis. Plin is required for the translocation of hormone-sensitive lipase (HSL) from the cytosol to lipid droplets upon stimulation. In these studies, we provide direct evidence for a physical interaction of HSL with Plin. By coexpressing HSL with truncation mutations of Plin, we demonstrate using coimmunoprecipitation that HSL can interact with an N-terminal region located between amino acids 141 and 200 of Plin A as well as with a C-terminal region located between amino acids 406 and 480. The N-terminal construct, Plin 1-200, which does not associate with lipid droplets but interacts with HSL, can function as a dominant negative for PKA-stimulated lipolysis. Using confocal microscopy of Plin truncations, we demonstrate that sequences between amino acids 463 and 517 may be important for or participate in lipid targeting. The results suggest the translocation of HSL to the lipid droplet occurs by virtue of Plin localization to the surface of lipid droplets and a physical interaction of HSL occurring with sequences within the N-terminal region of Plin.     

Covalent immobilization of pullulanase on alginate and study of its hydrolysis of pullulan

The immobilization of pullulanase from Klebsiella pneumoniae by grafting was investigated. Pullulanase was linked after activation of alginate via a covalent bond between the amine groups of the enzyme and the carboxylic acid groups of alginate. The immobilization yield was 60%. The activity of free pullulanase and immobilized pullulanase was followed by the quantification of reducing ends by colorimetric assay and the determination of the molar masses of the hydrolyzed pullulan by SEC/MALS/DRI. Compared to free pullulanase, the kinetics is largely slowed. The evolution of the weight average molar mass of pullulan leading to high production of shorter oligosaccharides during hydrolysis is not the same as that obtained with free enzyme. Immobilized pullulanase retained 75% and 30% of its initial activity after 24 h and 14 days of incubation at 60°C, respectively while free pullulanase lost its activity after 5 h of hydrolysis at the same temperature. The kinetic parameters of immobilized pullulanase were also investigated by isothermal titration calorimetry (ITC). The affinity of immobilized enzyme to its substrate was reduced compared to the free pullulanase due to steric hindrance and chemical links. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:883–889, 2015     

Comparison of esterification and transesterification of fructose by porcine pancreas lipase immobilized on different supports

The syntheses of fructose butyrate with five different immobilized porcine pancreas lipases were studied in acetonitrile with butyric acid and tributyrin as acyl donors. The hydrolytic activities of the enzymes were measured during the syntheses. The transesterification yield was the highest with the Celite-adsorbed enzyme: 57% (1.42 g fructose butyrate l–1), and this form exhibited the highest degree of hydrolytic activity preservation (57%) after operation for 20 days.     

有机相中固定化脂肪酶促有机硅烷醇的转酯

探讨了有机相中固定化脂肪酶（Lipozyme）催化非天然的有机硅院醇与脂肪酸酯转酯反应的可能性;系统地研究了有机溶剂特性、水活度、有机硅烷醇结构、脂肪酸酯碳链长等因素对转酯反应的影响。     

立体选择性脂肪酶的筛选及其在薄荷醇拆分中的应用

采用双平板透明圈方法,筛选得到1株能够选择性水解L-薄荷醇丙酸酯的微生物。通过16sDNA测序,鉴定为产碱假单胞菌Pseudomonas alcaligenes。该菌所产脂肪酶可水解4对薄荷醇丙酸酯,在35℃时绝对转化率达到50％时,表现出较高的对映体过量值（e.e.p〉99％）与非对映体过量值（d．e．p〉90％）。这一结果表明,产碱假单胞菌脂肪酶是具有工业应用前景的生物催化剂。     

荧光假单孢菌Pseudomonas fluorescence 5963 产脂肪酶条件的优化

对荧光假单孢菌Pseudomonas fluorescence 5963产脂肪酶条件进行了筛选.该菌株的最适产酶条件如下(w/v)1%淀粉作为碳源;2%酵母抽提物作为氮源;0.03%Mg2SO4·7H2O;0.2%诱导物,水1 L;pH 7.0;培养温度为28℃.