DNA bending of pSC101 ori induced by Rep,a replication initiator protein and IHF

Purified Rep (or RepA) protein, a replication initiator of plasmid pSC101, is present almost solely in the dimer form, and its binding activity for the directly repeated sequences (iterons) in the replication origin (ori) is very low. When Rep protein was treated with guanidine hydrochloride followed by renaturation, it was shown to bind to the iterons with very high efficiency. A gel shift experiment suggested that guanidine-treated Rep bound to iterons as a monomer form. The Rep monomer bound noncooperatively to the three iterons and induced bending of the DNA helix axis in the same direction (about 100 degrees ). The configuration of the IHF box that is a binding site of another DNA bending protein IHF, the three iterons and an AT-rich region between these sequences was important for efficient bending of the ori region. Furthermore, a mutant Rep protein (Rep(IHF)) which can support the plasmid replication in IHF-deficient host cells was purified, and it was found that affinity of the Rep(IHF) monomer for iterons was similar to that of wild-type Rep and bent DNA only 14 degrees more strongly than did the wild-type Rep. Rep(IHF)-dependent plasmid replication, however, required both enhancer regions, par and IR-1, in addition to "core ori" as a minimal essential ori, whereas only one of these two enhancers was necessary for wild-type Rep-dependent replication. How Rep(IHF) can support plasmid replication in the absence of IHF is discussed.     

Anatomy of the replication origin of plasmid ColE2-P9

The plasmid ColE2-P9 origin is a 32-bp region which is specifically recognized by the plasmid-specified Rep protein to initiate DNA replication. We analyzed the structural and functional organization of the ColE2 origin by using various derivatives carrying deletions and single-base-pair substitutions. The origin may be divided into three subregions: subregion I, which is important for stable binding of the Rep protein; subregion II, which is important for binding of the Rep protein and for initiation of DNA replication; and subregion III, which is important for DNA replication but apparently not for binding of the Rep protein. The Rep protein might recognize three specific DNA elements in subregions I and II. The relative transformation frequency of the autonomously replicating plasmids carrying deletions in subregion I is lower, and nevertheless the copy numbers of these plasmids in host bacteria are higher than those of the wild-type plasmid. Efficient and stable binding of the Rep protein to the origin might be important for the replication efficiency to be at the normal (low) level. Subregion II might be essential for interaction with the catalytic domain of the Rep protein for primer RNA synthesis. The 8-bp sequence across the border of subregions II and III, including the primer sequence, is conserved in the (putative) origins of many plasmids, the putative Rep proteins of which are related to the ColE2-P9 Rep protein. Subregion III might be required for a step that is necessary after Rep protein binding has taken place.     

Negative control of plasmid pSC101 replication by increased concentrations of both initiator protein and iterons

Increased intracellular concentrations of the initiator protein Rep (or RepA) interfere with pSC101 DNA replication, and mutated Rep proteins that result in an increase in plasmid copy numbers do not inhibit the replication. A rep mutant (rep(inh)) defective in the inhibitory activity was isolated and found to be a new high copy number mutant. The inhibitory function of Rep was enhanced by the coexistence of directly repeated sequences (DR; iterons) in the replication origin region (ori), but not by the inverted repeat sequences (IR) in ori and the rep promoter. This synergistic effect of Rep and DR sequences for the replication inhibition was dependent on their intracellular concentrations. Considering that DR sequences are the specific binding sites of the Rep monomer form, the Rep monomer-DR complex might be responsible for the inhibition of the plasmid replication. Furthermore, the Rep monomer in the crude cell extracts facilitated dimerization of DR DNA fragments by DNA ligase. Neither synergistic inhibitory function with DR nor Rep mediated dimerization of DR DNA was observed in high copy number mutant Rep proteins. The role of the Rep-iteron complex in the copy number control of pSC101 is discussed.     

The Rep protein binding elements of the plasmid ColE2-P9 replication origin

The plasmid ColE2-P9 (ColE2) origin (32bp) is specifically recognized by the plasmid-specified Rep protein that initiates DNA replication. The ColE2 origin is divided into at least three functional subregions (I, II, and III), and three sites (a, b, and c) found in subregions I and II play important roles in Rep protein binding. We performed SELEX experiments of plasmid ColE2 to determine the optimal sequences for specific binding of the Rep protein. From these experiments, we obtained a common 16-bp sequence (5'-TGAGACCANATAAGCC-3'), which corresponds to about one half of the minimal ColE2 origin and contains sites a and b. Gel mobility shift assays using single-point mutant origins and the Rep protein further indicated that high affinity sequence-specific recognition by the Rep protein requires sites a, b, and c, but that mutations in site c were less disruptive to this recognition than those in sites a and b.     

Open strands adjacent to iterons promote the binding of the replication initiator protein (Rep) of pSC101 to the unit sequence of the iterons in vitro

The purified dimeric form of the Rep protein, a replication initiator protein of the plasmid pSC101, has a low affinity for repeated sequences, iterons, in the replication origin of the plasmid, and higher affinities for two inverted repeats in the operator region of the rep gene resulting in its functioning as an autorepressor. Studies of binding to various synthetic DNA have established that Rep can bind to duplex iteron-sequence carrying open (non-complementary) strands at one end proximal to the rep gene. Open strands at the opposite end of the iteron have no effect on Rep-binding. One open strand seems to be required in a sequence-specific fashion. A randomly sequenced duplex DNA with the open strands cannot bind to Rep but can function as a significant competitor. This suggests that Rep has some affinity for the open strands and forms a stable complex with the adjacent iteron. The mutated Rep protein, Rep1, which causes an increase in the plasmid copy number in vivo, has equally high affinity for the iteron with the open strands as wild type Rep, though it has a lower affinity for the inverted repeats than the wild type. The Rep dimer might bind to these DNA sequences with different modes.     

Specificity of the interactions between the Rep proteins and the origins of replication of Staphylococcus aureus plasmids pT181 and pC221

Summary pT181 and pC221 are closely relatedStaphylococcus aureus plasmids with the same genome organization, which is characterized by the overlapping of the origin of replication with the sequence encoding a protein, Rep, essential for plasmid replication. Former results have shown the lack of in vivo cross-complementation between these two plasmids, while in vitro studies have revealed the ability of both Rep proteins to act on either origin. One possible explanation for this difference was based on a previous analysis of the incompatibility expressed by the origin of replication of these plasmids, showing that the origin embedded in therep gene competes for Rep utilization with the origin of a test plasmid and that changes in the sequence of the origin reduce its ability to compete. To avoid this problem, in the present work special hybrids were constructed in which the origin of replication overlapping therep gene was mutationally inactivated, without changing the amino acid sequence of the encoded protein. The level of Rep expression by these hybrids could be varied by taking advantage of what is presently known about the control of Rep synthesis in plasmid pT181. The results of complenentation studies conducted using these hybrids have shown that: (i) at the usual level of expression for a wild-type plasmid each Rep protein can initiate replication strictly from its corresponding origin; (ii) when overproduced, the pT181 RepC protein could also act efficiently on the pC221 origin; a functional pT181 origin present in the same host completely prevented this complementation; (iii) in excess, the RepD protein encoded by pC221 could replicate a plasmid carrying the pT181 origin but could not ensure the hereditary stability of such a plasmid in the absence of another active replication system; (iv) when overproduced both RepC and RepD could act on the origin of replication of three other related plasmids pS194, pC223 and pUB112.     

Exonuclease III promotes in vitro binding of the replication initiator protein of plasmid pSC101 to the repeated sequences in the ori region

Purified Rep protein, a replication initiator protein of plasmid pSC101, has less binding affinity for the direct repeats (DR) in the replication origin region (ori) than that for the inverted repeats (IR) in the promoter region of the structure gene of Rep (rep) (Sugiura, S. et al. (1990) J. Biochem. 107, 369-376). We found a protein factor that promotes binding of purified Rep to the DR sequence in the cell extract of Escherichia coli. In the presence of the factor, DNA fragments containing the DR sequence can form a specific DNA-protein complex by the addition of low concentrations of Rep. On the contrary, IR-containing DNA loses its binding activity for Rep by preincubation with the factor. We purified extensively the factor and identified it as exonuclease III (exo III). Enzymatic action of the factor or authentic exo III at 37 degrees C is necessary for binding of Rep to DR-DNA. This binding of Rep to duplex DNA treated with exo III is DR-sequence specific. Since Rep cannot bind to the single stranded DR sequence, the present finding suggests that partial single-stranded regions around the DR sequence are required for binding of Rep.     

DNA sequence and analysis of a cryptic 4.2-kb plasmid from the filamentous cyanobacterium, Plectonema sp. strain PCC 6402.

The 4194-bp plasmid, pRF1, from Plectonema sp. Strain PCC 6402 was completely sequenced and analyzed. Seven potential open reading frames were identified. The predicted amino acid sequence of open reading frame C (ORF C) had identities of 34, 29, and 25% with Rep B from the Staphylococcus aureus plasmid, pUB110; Rep from the Bacillus amyloliquefaciens plasmid, pFTB14; and protein A from the S. aureus plasmid, pC194, respectively. A 75-amino-acid region conserved in these proteins (Rep B, Rep, and protein A) also was highly conserved in ORF C with identities of 45, 37, and 40%, respectively. Significantly, 16 of the 21 amino acids conserved in Rep B, Rep, and protein A were found at the same positions in ORF C. This ORF may encode a replication protein that includes a region conserved in some eubacteria. Additional structural features include a 425-bp region that contains palindromes, tandem repeats, and short direct repeats which may correspond to the origin of replication. An 18-bp inverted repeat was located between two open reading frames, A and G.     

Mechanism of origin activation by monomers of R6K-encoded pi protein

One recurring theme in plasmid duplication is the recognition of the origin of replication (ori) by specific Rep proteins that bind to DNA sequences called iterons. For plasmid R6K, this process involves a complex interplay between monomers and dimers of the Rep protein, pi, with seven tandem iterons of gamma ori. Remarkably, both pi monomers and pi dimers can bind to iterons, a new paradigm in replication control. Dimers, the predominant form in the cell, inhibit replication, while monomers facilitate open complex formation and activate the ori. Here, we investigate a mechanism by which pi monomers out-compete pi dimers for iteron binding, and in so doing activate the ori. With an in vivo plasmid incompatibility assay, we find that pi monomers bind cooperatively to two adjacent iterons. Cooperative binding is eliminated by insertion of a half-helical turn between two iterons but is diminished only slightly by insertion of a full helical turn between two iterons. These studies show also that pi bound to a consensus site promotes occupancy of an adjacent mutated site, another hallmark of cooperative interactions. pi monomer/iteron interactions were quantified using a monomer-biased pi variant in vitro with the same collection of two-iteron constructs. The cooperativity coefficients mirror the plasmid incompatibility results for each construct tested. pi dimer/iteron interactions were quantified with a dimer-biased mutant in vitro and it was found that pi dimers bind with negligible cooperativity to two tandem iterons.     

Temperature-sensitive cloning vector for Corynebacterium glutamicum

We constructed a temperature-sensitive form of the Corynebacterium glutamicum ATCC13869 cryptic plasmid, pBL1. The C. glutamicum/Escherichia coli shuttle vector pSFK6, which is composed of pBL1 and the E. coli cloning vector pK1, was mutagenized in vitro by treatment with hydroxylamine, and introduced into C. glutamicum cells. A mutant plasmid, which was stably maintained at 25 degrees C but not at 34 degrees C, was isolated from the cells. Sequencing the plasmid, which was named p48K, revealed four substitutions in the Rep protein coding region. Moreover, site-directed single-nucleotide substitutions showed that a G to A transition at position 2,920, which resulted in a Pro-47 to Ser substitution in the Rep protein, was responsible for its temperature-sensitive replication. Pro-47 is conserved among the Rep proteins of the pIJ101/pJV1 family of plasmids. This temperature-sensitive cloning vector will be useful for disrupting genes in this industrially important bacterium.     

Charge-to-Alanine Mutagenesis of the Adeno-Associated Virus Type 2 Rep78/68 Proteins Yields Temperature-Sensitive and Magnesium-Dependent Variants

The adeno-associated virus type 2 (AAV) replication (Rep) proteins Rep78 and 68 (Rep78/68) exhibit a number of biochemical activities required for AAV replication, including specific binding to a 22-bp region of the terminal repeat, site-specific endonuclease activity, and helicase activity. Individual and clusters of charged amino acids were converted to alanines in an effort to generate a collection of conditionally defective Rep78/68 proteins. Rep78 variants were expressed in human 293 cells and analyzed for their ability to mediate replication of recombinant AAV vectors at various temperatures. The biochemical activities of Rep variants were further characterized in vitro by using Rep68 His-tagged proteins purified from bacteria. The results of these analyses identified a temperature-sensitive (ts) Rep protein (D40,42,44A-78) that exhibited a delayed replication phenotype at 32 degrees C, which exceeded wild-type activity by 48 h. Replication activity was reduced by more than threefold at 37 degrees C and was undetectable at 39 degrees C. Stability of the Rep78 protein paralleled replication levels at each temperature, further supporting a ts phenotype. Replication differences resulted in a 3-log-unit difference in virus yields between the permissive and nonpermissive temperatures (2.2 x 10(6) and 3 x 10(3), respectively), demonstrating that this is a relatively tight mutant. In addition to the ts Rep mutant, we identified a nonconditional mutant with a reduced ability to support viral replication in vivo. Additional characterization of this mutant demonstrated an Mg(2+)-dependent phenotype that was specific to Rep endonuclease activity and did not affect helicase activity. The two mutants described here are unique, in that Rep ts mutants have not previously been described and the D412A Rep mutant represents the first mutant in which the helicase and endonuclease functions can be distinguished biochemically. Further understanding of these mutants should facilitate our understanding of AAV replication and integration, as well as provide novel strategies for production of viral vectors.     

Characterization, sequence and mode of replication of plasmid pNB2 from the thermophilic bacterium Clostridium thermosaccharolyticum

 The 1882-bp nucleotide sequence of the cryptic plasmid pNB2 isolated from the thermophilic bacterium Clostridium thermosaccharolyticum was determined. pNB2 DNA has very low GC content (27%) and may serve as a model for studying the modes of maintenance and replication of AT-rich DNA under conditions of thermophilic growth. The plasmid sequence revealed three open reading frames (ORFs) which would encode polypeptides of 289, 68 and 59 amino acids, respectively, and these proteins were synthesized in E. coli extracts primed with the plasmid. We found that the product of ORF289 may be initiated at the non-ATG start codon, TTG, and has similarities with the conserved motifs of Rep proteins encoded by rolling circle (RC) plasmids of the pC194/pUB110 family. Southern hybridization analysis of lysates of C. thermosaccharolyticum cells harboring pNB2 revealed single-stranded intermediates, suggesting that this plasmid is able to replicate in clostridial cells via the RC mechanism. The most significant similarities are found between pNB2 Rep protein and the Rep proteins of three RC plasmids of the pC194 family (pTB913, pBC1 and pST1) isolated from thermophilic bacteria. Comparative analysis of these Rep proteins showed that despite the significant level of divergence, these Rep proteins share a high degree of similarity in the regions of five well-known conserved domains of RC Rep proteins and fall into two groups in accordance with the similarities found in their active sites. Received: 25 April 1996 / Accepted: 20 June 1996     

Characterization of a cryptic plasmid from an alpha-proteobacterial endosymbiont of Amoeba proteus

A new cryptic plasmid pAP3.9 was discovered in symbiotic alpha-proteobacteria present in the cytoplasm of Amoeba proteus. The plasmid is 3869bp with a GC content of 34.66% and contains replication origins for both double-strand (dso) and single-strand (sso). It has three putative ORFs encoding Mob, Rep and phosphoglycolate phosphatase (PGPase). The pAP3.9 plasmid appears to propagate by the conjugative rolling-circle replication (RCR), since it contains all required factors such as Rep, sso and dso. Mob and Rep showed highest similarities to those of the cryptic plasmid pBMYdx in Bacillus mycoides. The PGPase was homologous to that of Bacillus cereus and formed a clade with those of Bacillus sp. in molecular phylogeny. These results imply that the pAP3.9 plasmid evolved by the passage through Bacillus species. We hypothesize that the plasmid-encoded PGPase may have contributed to the establishment of bacterial symbiosis within the hostile environment of amoeba cytoplasm.     

Characterization,sequence and mode of replication of plasmid pNB2 from the thermophilic bacterium Clostridium thermosaccharolyticum

The 1882-bp nucleotide sequence of the cryptic plasmid pNB2 isolated from the thermophilic bacterium Clostridium thermosaccharolyticum was determined. pNB2 DNA has very low GC content (27%) and may serve as a model for studying the modes of maintenance and replication of AT-rich DNA under conditions of thermophilic growth. The plasmid sequence revealed three open reading frames (ORFs) which would encode polypeptides of 289, 68 and 59 amino acids, respectively, and these proteins were synthesized in E. coli extracts primed with the plasmid. We found that the product of ORF289 may be initiated at the non-ATG start codon, TTG, and has similarities with the conserved motifs of Rep proteins encoded by rolling circle (RC) plasmids of the pC194/pUB110 family. Southern hybridization analysis of lysates of C. thermosaccharolyticum cells harboring pNB2 revealed single-stranded intermediates, suggesting that this plasmid is able to replicate in clostridial cells via the RC mechanism. The most significant similarities are found between pNB2 Rep protein and the Rep proteins of three RC plasmids of the pC194 family (pTB913, pBC1 and pST1) isolated from thermophilic bacteria. Comparative analysis of these Rep proteins showed that despite the significant level of divergence, these Rep proteins share a high degree of similarity in the regions of five well-known conserved domains of RC Rep proteins and fall into two groups in accordance with the similarities found in their active sites.