Microbial reduction of ethyl acetoacetate to ethyl (R)-3-hydroxybutyrate in an ionic liquid containing system

A hydrophilic ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF₄) was successfully employed as co-solvent for asymmetric bioreduction of ethyl acetoacetate (EOB) to ethyl (R)-3-hydroxybutyrate (R-EHB) catalyzed by Pichia membranaefaciens Hansen ZJPH07 cells. The results demonstrated that the addition of [BMIM]BF₄ in reaction system can markedly reduce the substrate inhibition and moderately improve the enantioselectivity compared to that in monophasic aqueous system. Among different alcohols and carbohydrates tried as co-substrate, glucose was a proper electron donor. Although isopropanol gave the best enantioselectivity with the highest yield, S-enantiomer was obtained. To optimize the bioreduction, some reaction parameters for the biosynthesis of R-EHB in this IL-containing system were investigated, such as temperature, buffer pH, shaking speed, substrate concentration, wet cells concentration and reaction time. Under the optimum conditions, best conversion of 77.8% and product enantiomeric excess (e.e.) of 73.0% were obtained. A comparative study was performed either in the presence or in the absence of [BMIM]BF₄, higher reaction yield (77.8% versus 68.5%) and product e.e. (73.0% versus 65.1%) were observed in IL-containing system with 0.55 M of the substrate, but 0.35 M of substrate concentration for the reduction in aqueous system without the addition of [BMIM]BF₄.     

Substrate stabilization and noncompetitive inhibition effects of a water-miscible ionic liquid [BMPy][BF<Subscript>4</Subscript>] in the catalysis of horseradish peroxidase

The inhibition mechanism of a water-miscible ionic liquid, N-butyl-3-methypyridinium tetrafluoroborate ([BMPy][BF₄]), on the catalysis of horseradish peroxidase (HRP) was investigated. The K _m value for the oxidation of guaiacol (2-methoxyphenol) with H₂O₂ catalyzed by HRP increased from 2.8 mM in 100% water to 12.6 mM in 25% (v/v) [BMPy][BF₄]. This increase of K _m by the ionic liquid was elucidated to be caused by the strong stabilization of the ground state of guaiacol by the ionic liquid. On the contrary, the k _cat value for the HRP-catalyzed reaction decreased from 13.8/sec in 100% water to 6.7/sec in 25% (v/v) [BMPy][BF₄]. Such decrease of k _cat value of HRP catalysis by the increasing content of [BMPy][BF₄] was described using the noncompetitive inhibition of the enzyme by the ionic liquid. The value of the inhibition constant of [BMPy][BF₄] was 1.48 M indicating that the ionic liquid exerts a weak noncompetitive inhibition effect on the HRP catalysis.     

Strong substrate-stabilizing effect of a water-miscible ionic liquid [BMIM][BF<Subscript>4</Subscript>] in the catalysis of horseradish peroxidase

The effects of a water-miscible ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]), on both thermodynamics and kinetic mechanism of the horseradish peroxidase (HRP)-catalyzed oxidation of guaiacol (2-methoxyphenol) by H₂O₂ were investigated. The ionic liquid stabilized the ground state of guaiacol by causing an 8-fold increase of K_m from 3 to 23 mM upon the addition of 25% (v/v) [BMIM][BF₄]. In addition, the effect of [BMIM][BF₄] in decreasing the k_cat value of HRP catalysis was described by a non-competitive inhibition mechanism. The value of the inhibition constant of [BMIM][BF₄] was 2.9 M indicating that the ionic liquid plays the role of a weak non-competitive inhibitor for HRP catalysis.     

Asymmetric alkene epoxidation by Mn(III)salen catalyst in ionic liquids

The enantioselective epoxidation of 6-cyano-2,2-dimethylchromene (Chrom) catalysed by the Jacobsen catalyst, using sodium hypochlorite (NaOCl) as oxygen source, at room temperature, was performed in a series of 1,3-dialkylimidazolium and tetra-alkyl-dimethylguanidium based ionic liquids. All the room temperature ionic liquids (RTILs) could be used as reaction media for the enantioselective epoxidation of the alkene giving, generally, moderate to good epoxide yields and enantiomeric excesses (ee%).For the series of ionic liquids derived from the 1,3-dialkylimidazolium cation, it was observed some relationship between the RTILs physical properties and the catalytic reaction parameters, exemplified by linear correlations between (i) the ee% and the α Kamlet-Taft parameter (hydrogen bond acidity of the solvent) for CH₂Cl₂ and [C₄m_nim][BF₄] ionic liquids (n = 1 or 2), and (ii) the ee% and the β Kamlet-Taft parameter (hydrogen bond basicity of the solvent) for CH₂Cl₂ and [C₄mim][X] ionic liquids (X = PF₆, NTf₂ or BF₄).All the RTILs could be reused in further catalytic cycles, with the exception of [C₈mim][PF₆]. The reutilisation of the Jacobsen catalyst for four times generally led to a decrease in the epoxide yield and to a slight decrease in the enantioselectivity. The recycling of the catalyst could be improved by imparting an ionic character to the complex through abstraction of the axially coordinated chloride anion (Cat 2). Other oxygen sources, such as iodosylbenzene, hydrogen peroxide and urea-hydrogen peroxide adduct, were also tested coupled with Jacobsen catalyst, but the best results were achieved with NaOCl.     

Growth of Escherichia coli, Pichia pastoris and Bacillus cereus in the Presence of the Ionic Liquids [BMIM][BF4] and [BMIM][PF6] and Organic Solvents

The influence of the two most commonly used ionic liquids (1-butyl-3-methyl imidazolium tetrafluoroborate, [BMIM][BF₄], 1-butyl-3-methyl imidazolium hexafluorophosphate, [BMIM][PF₆]) and three selected organic solvents (dimethylsulfoxide, ethanol, methanol) on the growth of Escherichia coli, Pichia pastoris and Bacillus cereus was investigated. [BMIM][BF₄] was toxic at 1% (v/v) on all three microorganisms. The minimal inhibitory concentration (MIC) of [BMIM][BF₄] on E. coli growth was between 0.7 and 1% (v/v). In contrast, [BMIM][PF₆] was less toxic for P. pastoris and B. cereus, whereas E. coli was not able to tolerate [BMIM][PF₆] (MIC value: 0.3–0.7% v/v). Growth of P. pastoris was unaffected by [BMIM][PF₆] at 10% (v/v). Similar results were found for dimethylsulfoxide. Thus, ionic liquids (ILs) can have substantial inhibitory effects on the growth of microorganisms, which should be taken into account for environmental reasons as well as for the use of ILs as co-solvents in biotransformations. Revisions requested 2 November 2005; Revisions received 20 December 2005     

Amphiphilic proline and prolylproline derivatives in the rhodium(I)-catalyzed asymmetric hydrogenation in water: Chiral induction as indication of the location of reactants within the micelle

Proline and prolylproline dipeptide derived surfactants promote the asymmetric hydrogenation of (Z)-methyl α-acetamidocinnamate in water in the presence of the catalytic system [Rh(cod)₂]BF₄ + BPPM. Activity and enantioselectivity are enhanced significantly and the results in water are similar to those obtained with organic solvents. The possibility of a chiral induction was investigated in the presence of the optically active amino acid and peptide amphiphiles and an achiral rhodium catalyst [Rh(bdpb)(cod)]BF₄. The analysis of the low optical induction gave some indications of the site where the reaction takes place within the micelle. Selected critical micelle concentrations (cmc) of the new prepared surfactants were determined by surface tension measurements. Chirality 10:754–759, 1998. © 1998 Wiley-Liss, Inc.     

Optimization of (R,S)-1-phenylethanol kinetic resolution over Candida antarctica lipase B in ionic liquids

The kinetic resolution of racemates constitutes one major route to manufacture optically pure compounds. The enzymatic kinetic resolution of (R,S)-1-phenylethanol over Candida antarctica lipase B (CALB) by using vinyl acetate as the acyl donor in the acylation reaction was chosen as model reaction. A systematic screening and optimization of the reaction parameters, such as enzyme, ionic liquid and substrates concentrations with respect to the final product concentration, were performed. The enantioselectivity of immobilized CALB commercial preparation, Novozym 435, was assayed in several ionic liquids as reaction media. In particular, three different ionic liquids: (i) 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], (ii) 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] and (iii) 1-ethyl-3-methylimidazolium triflimide [emim][NTf₂] were tested. At 6.6% (w/w) of Novozym 435, dispersed in 9.520 M of [bmim][PF₆] at 313.15 K, using an equimolar ratio of vinyl acetate/(R,S)-1-phenylethanol after 3 h of bioconversion, the highest possible conversion (50%) was reached with enantiomeric excess for substrate higher than 99%.     

Effect of ionic liquid [BMIM][PF<Subscript>6</Subscript>] on asymmetric reduction of ethyl 2-oxo-4-phenylbutyrate by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

The effect of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) on the asymmetric reduction of ethyl 2-oxo-4-phenylbutyrate (EOPB) to synthesize optical active ethyl 2-hydroxy-4-phenylbutyrate (EHPB) catalyzed by Saccharomyces cerevisiae was investigated. (R)-EHPB [70.4%, e.e.(R)] is obtained using ethyl ether or benzene as the solvent. The main product is (S)-EHPB [27.7%, e.e.(S)] in [BMIM][PF₆]. However, in ionic liquid-water (10:1, v/v) biphasic system, the enantioselectivity of the reduction is shifted towards (R)-side, and e.e.(R) is increased from 6.6 to 82.5% with the addition of ethanol (1%, v/v). The effect of the use of [BMIM][PF₆] as an additive in relatively small amounts on the reduction was also studied. We find that there is a decline in the enantioselectivity of the reduction in benzene. In addition, a decrease in the conversion of EOPB and the yield of EHPB with increasing [BMIM][PF₆] concentrations occurs in either organic solvent–water biphasic systems or benzene.     

Production of biodiesel fuel from soybean oil catalyzed by fungus whole-cell biocatalysts in ionic liquids

The methanolysis of soybean oil to produce a fatty acid methyl ester (ME, i.e., biodiesel fuel) was catalyzed by lipase-producing filamentous fungi immobilized on biomass support particles (BSPs) as a whole-cell biocatalyst in the presence of ionic liquids. We used four types of whole-cell biocatalysts: wild-type Rhizopus oryzae producing triacylglycerol lipase (w-ROL), recombinant Aspergillus oryzae expressing Fusarium heterosporum lipase (r-FHL), Candida antarctica lipase B (r-CALB), and mono- and diacylglycerol lipase from A. oryzae (r-mdlB). w-ROL gave the high yield of fatty acid methyl ester (ME) in ionic liquid [Emim][BF₄] or [Bmim][BF₄] biphasic systems following a 24 h reaction. While lipases are known to be severely deactivated by an excess amount of methanol (e.g. 1.5 Mequiv. of methanol against oil) in a conventional system, methanolysis successfully proceeded even with a methanol/oil ratio of 4 in the ionic liquid biphasic system, where the ionic liquids would work as a reservoir of methanol to suppress the enzyme deactivation. When only w-ROL was used as a biocatalyst for methanolysis, unreacted mono-glyceride remained due to the 1,3-positional specificity of R. oryzae lipase. High ME conversion was attained by the combined use of two types of whole-cell biocatalysts, w-ROL and r-mdlB. In a stability test, the activity of w-ROL was reduced to one-third of its original value after incubation in [Bmim][BF₄] for 72 h. The stability of w-ROL in [Bmim][BF₄] was greatly enhanced by cross-linking the biocatalyst with glutaraldehyde. The present study demonstrated that ionic liquids are promising candidates for use as the second solvent in biodiesel fuel production by whole-cell biocatalysts.     

Chiral Imidazolidin-4-one with catalytic amount of Dicationic ionic liquid act as a recoverable and reusable Organocatalyst for asymmetric Diels-Alder reaction

Imidazolidin-4-one is used as a recoverable organocatalyst for the asymmetric Diels-Alder reaction in the presence of catalytic amount of dicationic ionic liquid and trifluoroacetic acid as a co-catalyst. The Diels-Alder reaction between model substrate cyclopentadiene and crotonaldehyde gave the product in 95% conversion and 87% ee of the endo-product. The catalyst was shown better reusability when the 20 mol% of dicationic ionic liquid was used and catalyst was reused upto 5 cycles, conversion remains upto 3 recycles but ee of endo- 9 was slightly droped.     

DABCO-based chiral ionic liquids as recoverable and reusable organocatalyst for asymmetric Diels–Alder reaction

New DABCO-based chiral ionic liquids were synthesized and evaluated in asymmetric Diels–Alder reaction of cyclopentadiene with α,β-unsaturated aldehydes or 4-phenyl-3-buten-2-one. Chiral ionic liquid of modified MacMillan catalyst having a DABCO cation and hexafluorophosphate anion acts as organocatalyst (5 mol%) for the Diels–Alder reaction of crotonaldehyde and cyclopentadiene producing 98% of the product and 87% ee (endo) in CH₃CN/H₂O (95/5) at 25°C in 2 h. The scope and limitations of the catalysis were also studied by using cyclopentadiene and α,β-unsaturated aldehydes, and the Diels–Alder products were obtained in 18%–92% yields with 68%–93% ee. The catalyst was recycled and reused up to 6 cycles with a slight drop in ee and conversion of the product.     

Stereoselective synthesis of (R)-1-chloro-3(3,4-difluorophenoxy)-2-propanol using lipases from Pseudomonas aeruginosa in ionic liquid-containing system

Direct transesterification of (R,S)-1-chloro-3-(3,4-difluorophenoxy)-2-propanol (rac-CDPP) (a key intermediate in the synthesis of the chiral drug (S)-lubeluzole) with vinyl butyrate by lipases from Pseudomonas aeruginosa (P. aeruginosa) MTCC 5113 was performed in hexane with ionic liquids (ILs) 1-butyl-3-methyl imidazolium hexafluorophosphate [BMIm][PF₆] and 1-butyl-3-methyl imidazolium tetrafluoroborate [BMIm][BF₄] as co-solvents. The maximum conversion (>49%) and enantiomeric excess (ee > 99.9%) was achieved in 6 h of incubation at 30 °C with [BMIm][PF₆] as co-solvent in a two-phase system. The enzyme was able to perform with the same specificity even at 60 °C in the presence of ILs. It was possible to use lipases repeatedly for more than 10 times while still maintaining absolute enantioselectivity and reactivity. Stability studies on lipases from P. aeruginosa in ILs revealed the fact that the enzyme constancy and the reactivity in catalyzing transesterification of rac-CDPP into (S)-1-chloro-3-(3,4-difluorophenoxy)-2-butanoate was of the order of [BMIm][PF₆] > [BMIm][BF₄] in two-phase system.     

Chemoenzymatic dynamic kinetic resolution of rac-1-phenylethanol in ionic liquids and ionic liquids/supercritical carbon dioxide systems

Continuous dynamic kinetic resolution processes in different ionic liquid/supercritical carbon dioxide biphasic systems were carried out by simultaneously using both immobilized Candida antarctica lipase B (Novozym 435) and silica modified with benzenosulfonic acid (SCX) catalysts at 40°C and 10 MPa. SCX was seen to act as an efficient heterogeneous chemical catalyst for the racemization of (S)-1-phenylethanol in different ionic liquid media ([emim][NTf₂], [btma][NTf₂] and [bmim][PF₆]). Coating both chemical and enzymatic catalysts with ILs greatly improved the efficiency of the process, providing a good yield (76%) of (R)-1-phenylethyl propionate product with excellent enantioselectivity (ee = 91–98%) in continuous operation.     

Enantioselective transesterification of racemic phenyl ethanol and its derivatives in organic solvent and ionic liquid using Pseudomonas aeruginosa lipase

The transesterification of 1-phenyl ethanol has been carried out using lipases from Pseudomonas aeruginosa MTCC 5113, to obtain chirally pure aryl ethanols with good yield and excellent enantioselectivity. The lipase from P. aeruginosa gave good conversion and moderate enantioselectivity (ee) in organic solvents, however, when the catalytic amount of ionic liquids were added in the reaction mixture, excellent enantioselectivity was obtained. Moreover, the change in enantiomer preference was seen in the presence of catalytic amount of ionic liquids. The findings revealed that hydrophobic ionic liquids (two-phase system) were the best solvents and 4-substituted aryl ethanols were the pre-eminent substrates for such type of reactions. The preparative scale (5 g) transesterification of 1-phenylethanol using lipases from P. aeruginosa yielded S-(−)-1-phenyl ethanol with 39% yield and >99% ee in hexane and 46% yield and >99% ee in [BMIm][PF₆].     

Partitioning of acidic, basic and neutral amino acids into imidazolium-based ionic liquids

In this paper, partitioning behaviors of typical neutral (Alanine), acidic (Glutamic acid) and basic (Lysine) amino acids into imidazolium-based ionic liquids [C₄mim][PF₆], [C₆mim][PF₆], [C₈mim][PF₆], [C₆mim][BF₄] and [C₈mim][BF₄] as extracting solvents were examined. [C₆mim][BF₄] showed the best efficiency for partitioning of amino acids. The partition coefficients of amino acids in ionic liquids were found to depend strongly on pH of the aqueous solution, amino acid and ionic liquid chemical structures. Different chemical forms of amino acids in aqueous solutions were pH dependent, so the pH value of the aqueous phase was a determining factor for extraction of amino acids into ionic liquid phase. Both water content of ionic liquids and charge densities of their anionic and cationic parts were important factors for partitioning of cationic and anionic forms of amino acids into ionic liquid phase. Extracted amino acids were back extracted into phosphate buffer solutions adjusted on appropriate pH values. The results showed that ionic liquids could be used as suitable modifiers on the stationary phase of an HPLC column for efficient separation of acidic, basic, and neutral amino acids.     

Hydroxynitrile Lyase Catalysis in Ionic Liquid-containing Systems

The cleavage of mandelonitrile catalysed by hydroxynitrile lyases (HNL) from Prunus amygdalus (PaHNL) and Manihot esculenta (MeHNL) proceeded more rapidly in monophasic aqueous media containing 1-propyl-3-methylimidazolium tetrafluoroborate [C₄MIm][BF₄] than in media containing acetonitrile or THF. Both HNLs were much more thermostable in [C₄MIm][BF₄] than in acetonitrile or THF. The addition of each of the four ionic liquids 1-butyl-, 1-pentyl- and 1-hexyl-3-methylimidazolium tetrafluoroborates at 2–6% (v/v in the aqueous phase) increased both the enzyme activity and the product e.e. in the PaHNL-catalysed transcyanation in an aqueous/DIPE biphasic system. However, MeHNL was inactivated by the ionic liquids, as indicated by the decreased reaction rate, substrate conversion and product e.e.     

Effect of different reaction parameters on the lipase-catalyzed selective acylation of polyhydroxylated natural compounds in ionic liquids

The effect of various reaction parameters on the enzymatic acylation of plant polyhydroxylated compounds, including phenolic and flavonoid glucosides (salicin, helicin, esculin and naringin), was investigated in imidazolium-based ionic liquids (1-butyl-3-methylimidazolium tetrafluoroborate [bmim]BF₄ and 1-butyl-3-methylimidazolium hexafluorophosphate [bmim]PF₆), using immobilized lipase B from Candida antarctica. The conversion yield, the regioselectivity and the reaction rate of the biocatalytic process strongly depended on the ionic liquid used, their water content, the incubation temperature, as well as the solubility and the concentration of substrates. For most glucosides tested, one major product (monoacylated derivative) was detected as a result of the acylation of the primary hydroxyl group of glucose moiety. The acylation rate and the regioselectivity of the process are higher in [bmim]BF₄, where the solubility of all glucosides is significantly higher than in [bmim]PF₆ or acetone. Response surface methodology (RSM) based on a five level-three variable central composite circumscribed design, was employed to evaluate the interactive effect of the molar ratio of substrates (MR), the initial concentration of glucoside (N) and the reaction time (RT), as well as for their optimization in [bmim]BF₄. At the optimal reaction conditions the maximum acylation yield was 87%. The amount of monoacylated derivatives produced in a single-step biocatalytic process reached values up to 31.6 g/l which is considerably higher than those reported for organic media.     

Ionic liquids as a reaction medium for lipase-catalyzed methanolysis of sunflower oil

Ionic liquids, 1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIm][PF₆]) and 1-ethyl-3-methyl imidazolium hexafluorophosphate ([EMIm][PF₆]), were used for the methanolysis of sunflower oil using Candida antarctica lipase (Novozyme 435) and gave yields of fatty acid methyl esters at 98–99% within 10 h. The optimum conditions of methanolysis in hydrophobic ionic liquids are 2% (w/w) lipase, 1:1 (w/w) oil/ionic liquid and 1:8 (mol/mol) oil/methanol at 58–60°C. Methanolysis using hydrophilic ionic liquids, 3-methyl imidazolium tetrafluoroborate ([HMIm][BF₄]) and 1-butyl-3-methyl imidazolium tetrafluoroborate ([BMIm][BF₄]), gave very poor yields. A hydrophobic ionic liquid thus protects the lipase from methanol. Recovered ionic liquids and lipase were used for four successive reaction cycles without any significant loss of activity.     

Enhanced activity,enantioselectivity and stability of papain in asymmetric hydrolysis of d,l-p-hydroxyphenylglycine methyl ester with ionic liquid

Papain-mediated asymmetric hydrolysis of D,L-p-hydroxyphenylglycine methyl ester (D,L-HPGME) was examined in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM·BF₄) and different solvents. The activity of the enzyme varied widely with change in BMIM·BF₄ concentration, with 12.5% (v/v) being the optimum BMIM·BF₄ concentration for the reaction. Papain displayed much higher hydrolytic activity and enantioselectivity in phosphate buffer solution of 12.5% (v/v) BMIM·BF₄ (pH 7.0) than in other media examined. Comparative studies on the kinetics and activation energy (E_a) of this reaction performed in different media showed a higher V_max, a lower K_m and a lower E_a for the reaction taking place in phosphate buffer solution of 12.5% (v/v) BMIM·BF₄ than in other media tested. The stability of papain at 45°C was considerably enhanced in BMIM·BF₄ as compared with aqueous buffer, 2-propanol and acetonitrile. A half-life time of 169 h was observed with BMIM·BF₄ in the presence of substrate, which was 9.2–16.8-fold higher than those with the other solvents. These results suggested that BMIM·BF₄ is an excellent reaction medium for this reaction.     

A density functional theory study on the interactions between dibenzothiophene and tetrafluoroborate-based ionic liquids

The interactions between dibenzothiophene (DBT) and N-butyl-N-methylimidazolium tetrafluoroborate ([BMIM][BF₄]), N-butyl-N-methylmorpholinium tetrafluoroborate ([Bmmorpholinium][BF₄]), N-butyl-N-methylpiperdinium tetrafluoroborate ([BMPiper][BF₄]), N-butyl-N-methylpyrrolidinium tetrafluoroborate ([BMPyrro][BF₄]), and N-butylpyridinium tetrafluoroborate ([BPY][BF₄]) were investigated using density functional theory approach. Geometric, electron, and topological properties were analyzed using natural bond orbital, atoms in molecules theory, and noncovalent interaction methods in order to understand intermolecular interactions between DBT and ionic liquids. The result shows that hydrogen bond and van der Waals interactions are widespread in all the ionic liquids-DBT systems. Ion-π interactions between DBT and cation or anion are also observed, while π⁺-π interactions are only found in the [BMIM][BF₄]-DBT and [BPY][BF₄]-DBT systems. The order of interaction energy is [BPY][BF4]-DBT > [BMIM][BF₄]-DBT >> [BMPiper][BF₄]-DBT > [BMPyrro][BF₄]-DBT > [BMmorpholinum][BF₄]-DBT. The energies between DBT and the two ionic liquids containing aromatic cations are significantly higher.