Selective hydrogenation of 1,10-phenanthrolines by silica-supported palladium nanoparticles

The catalytic hydrogenation of 1,10-phenanthroline (Phen) or 2,9-dimethyl-1,10-phenanthroline (DMPhen) has been achieved using silica-supported palladium nanoparticles (Pd/SiO₂) with metal contents of 1.98 or 9.95 wt%. With either catalyst, the hydrogenation regiochemistry has been effectively controlled by the reaction temperature. The catalyst with the higher metal content was selective for the hydrogenation of one heterocyclic ring of either substrate at 80 °C and for both external rings at 130 °C for Phen and at 160 °C for DMPhen. The catalyst with the lower metal content was more active and exhibited comparable selectivity.     

Apoptosis-inducing effect of a palladium(II) saccharinate complex of terpyridine on human breast cancer cells in vitro and in vivo

The anti-growth effect of a palladium(II) complex—[PdCl(terpy)](sac)·2H₂O] (sac = saccharinate, and terpy = 2,2′:6′,2″-terpyridine)—was tested against human breast cancer cell lines, MCF-7 and MDA-MB-231. Anti-growth effect was assayed by the MTT and ATP viability assays in vitro and then confirmed on Balb/c mice in vivo. The mode of cell death was determined by both histological and biochemical methods. The Pd(II) complex had anti-growth effect on a dose dependent manner in vitro and in vivo. The cells died by apoptosis as evidenced by the pyknotic nucleus, cleavage of poly-(ADP-ribose) polymerase (PARP) and induction of active caspase-3. These results suggest that the palladium(II) saccharinate complex of terpyridine represents a potentially active novel complex for the breast cancer treatment, thus warrants further studies.     

Selective separation of human serum albumin with copper(II) chelated poly(hydroxyethyl methacrylate) based nanoparticles

Poly(hydroxyethyl methacrylate) (PHEMA) nanoparticles with an average size of 300 nm in diameter and with a polydispersity index of 1.156 were produced by surfactant free emulsion polymerization. Specific surface area of the PHEMA nanoparticles was found to be 996 m²/g. Metal-chelating ligand 3-(2-imidazoline-1-yl)propyl(triethoxysilane) (IMEO) was covalently attached to the PHEMA nanoparticles. IMEO content was 0.97 mmol IEMO/g. The morphology and properties of these nanoparticles were characterized with scanning electron microscopy, Fourier transform infrared spectroscopy and atomic force microscopy. The Cu²⁺-chelated PHEMA–IMEO nanoparticles were used in the adsorption-elution studies of human serum albumin (HSA) in a batch system. Maximum HSA adsorption amount of the Cu²⁺ chelated nanoparticles was 680 mg HSA/g. The PHEMA–IMEO–Cu²⁺ nanoparticles exhibited a quite high adsorption capacity and fast adsorption rate due to their high specific surface area and the absence of internal diffusion resistance.     

Ethyl isovalerate synthesis using Candida rugosa lipase immobilized on silica nanoparticles prepared in nonionic reverse micelles

Uniform and monodispersed silica nanoparticles were synthesized with a mean diameter of 100 ± 20 nm as analyzed by Transmission Electron Microscopy (TEM). Glutaraldehyde was used as a coupling agent for efficient binding of the lipase onto the silica nanoparticles. For the hydrolysis of pNPP at pH 7.2, the activation energy within 25–40 °C for free and immobilized lipase was 7.8 and 1.25 KJ/mol, respectively. The V_max and K_m of immobilized lipase at 25 °C for pNPP hydrolysis were found to be 212 μmol/min/mg and 0.3 mM, whereas those for free lipase were 26.17 μmol/min and 1.427 mM, respectively. The lower activation energy of immobilized lipase in comparison to free lipase suggests a change in conformation of the enzyme leading to a requirement for lower energy on the surface of the nanoparticles. A better yield (7 fold higher) of ethyl isovalerate was observed using lipase immobilized onto silica nanoparticles in comparison to free lipase.     

Facile synthesis,physiochemical characterization and bio evaluation of sulfadimidine capped cobalt nanoparticles

Due to their less expensive, environment friendly nature, and their natural abundance of cobalt have attained more significant attention for the synthesis of cobalt nanoparticles. In the present study, we report the facile synthesis of cobalt nanoparticles using a straight forward chemical reduction approach of cobalt chloride with sodium borohydride and capping of sulfadimidine. sulfadimidine has strong capping eligibility on the surface of nanoparticles due to its chemical stability and is an applicable as stabilizer due to the existence of an amine bond. The as-synthesized sulfadimidine stabilized cobalt nanoparticles (Co-SD NPs) were characterized by using various spectroscopic and microscopic analysis like UV–Visible spectroscopy (UV–Vis), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), High-Resolution Transmission electron microscopy (HR-TEM), and Fourier-transform infrared spectroscopy (FT-IR). The XRD analysis exhibited the triclinic crystal structure of the as-synthesized cobalt nanoparticles and FT-IR analysis confirmed the capping of sulfadimidine via monodentate interaction. The HR-TEM analysis displayed the size of the cobalt nanoparticles approximately 3–5 nm. The antibacterial properties of the sulfadimidine stabilized cobalt nanoparticles (Co-SD NPs) were tested against various bacterial strains such as Klebsiella pneumonia (KP), Escherichia coli (EC) and Pseudomonas syringae (PS) by using agar disc diffusion approach. The results of sulfadimidine capped cobalt nanoparticles displayed the enhanced biological properties against the tested gram-negative bacteria.     

Use of Spirulina platensis micro and nanoparticles for the removal synthetic dyes from aqueous solutions by biosorption

In this research, micro and nanoparticles of Spirulina platensis dead biomass were obtained, characterized and employed to removal FD&C red no. 40 and acid blue 9 synthetic dyes from aqueous solutions. The effects of particle size (micro and nano) and biosorbent dosage (from 50 to 750 mg) were studied. Pseudo-first order, pseudo-second order and Elovich models were used to evaluate the biosorption kinetics. The biosorption nature was verified using energy dispersive X-ray spectroscopy (EDS). The best results for both dyes were found using 250 mg of nanoparticles, in these conditions, the biosorption capacities were 295 mg g^?1 and 1450 mg g^?1, and the percentages of dye removal were 15.0 and 72.5% for the FD&C red no. 40 and acid blue 9, respectively. Pseudo-first order model was the more adequate to represent the biosorption of both dyes onto microparticles, and Elovich model was more appropriate to the biosorption onto nanoparticles. The EDS results suggested that the dyes biosorption onto microparticles occurred mainly by physical interactions, and for the nanoparticles, chemisorption was dominant.     

Green biosynthesis of silver nanoparticles from Annona squamosa leaf extract and its in vitro cytotoxic effect on MCF-7 cells

The biological method for the synthesis of silver nanoparticles (AgNPs) using Annona squamosa leaf extract and its cytotoxicity against MCF-7 cells are reported. The synthesized AgNPs using A. squamosa leaf extract was determined by UV–visible spectroscopy and it was further characterized by FT-IR, X-ray diffraction (XRD), Transmission electron microscopy (TEM), Zeta potential and energy dispersive spectrometric (EDS) analysis. The UV–visible spectrum showed an absorption peak at 444 nm which reflects surface plasmon resonance (SPR) of AgNPs. TEM photography showed biosynthesized AgNPs were predominantly spherical in shape with an average size ranging from 20 to 100 nm. The Zeta potential value of ?37 mV revealed the stability of biosynthesized AgNPs. Furthermore, the green synthesized AgNPs exhibited a dose-dependent cytotoxicity against human breast cancer cell (MCF-7) and normal breast epithelial cells (HBL-100) and the inhibitory concentration (IC₅₀) were found to be 50 μg/mL, 30 μg/mL, and 80 μg/mL, 60 μg/ml for AgNPs against MCF-7 and normal HBL-100 cells at 24 h and 48 h incubation respectively. An induction of apoptosis was evidenced by (AO/EtBr) and DAPI staining. Application of such eco-friendly nanoparticles makes this method potentially exciting for the large scale synthesis of nanoparticles.     

Peptide-based hydrogel nanoparticles as effective drug delivery agents

Peptide-based hydrogel nanoparticles represent a promising alternative to current drug delivery approaches. We have previously demonstrated that the Fmoc-FF aromatic dipeptide building block can self-assemble in aqueous solutions to form nano-scaled ordered hydrogels of remarkable mechanical rigidity. Here, we present a scalable process for the assembly of this peptide into hydrogel nanoparticles (HNPs) aimed to be utilized as potential drug delivery carriers. Fmoc-FF based HNPs were formulated via modified inverse-emulsion method using vitamin E-TPGS as an emulsion stabilizer and high speed homogenization. The formed HNPs exhibited two distinguishable populations with an average size of 21.5 ± 1.3 and 225.9 ± 0.8 nm. Gold nanoparticles were encapsulated within the hydrogel nanoparticles as contrast agents to monitor the formation of the assemblies and their ultrastructural properties. Next, we demonstrated a robust experimental procedure developed and optimized for the formulation, purification, storage and handling procedures of HNPs. Encapsulation of doxorubicin (Dox) and 5-flourouracil (5-Fu) within the HNPs matrix showed release kinetics of the drugs depending on their chemical structure, molecular weight and hydrophobicity. The results clearly indicate that Fmoc-FF based hydrogel nanoparticles have the potential to be used as encapsulation and delivery system of various drugs and bioactive molecules.     

Synthesis and characterization of pHLIP® coated gold nanoparticles

Novel approaches in synthesis of spherical and multispiked gold nanoparticles coated with polyethylene glycol (PEG) and pH Low Insertion Peptide (pHLIP^®) were introduced. The presence of a tumor-targeting pHLIP^® peptide in the nanoparticle coating enhances the stability of particles in solution and promotes a pH-dependent cellular uptake. The spherical particles were prepared with sodium citrate as a gold reducing agent to form particles of 7.0±2.5 nm in mean metallic core diameter and ～43 nm in mean hydrodynamic diameter. The particles that were injected into tumors in mice (21 µg of gold) were homogeneously distributed within a tumor mass with no staining of the muscle tissue adjacent to the tumor. Up to 30% of the injected gold dose remained within the tumor one hour post-injection. The multispiked gold nanoparticles with a mean metallic core diameter of 146.0±50.4 nm and a mean hydrodynamic size of ~161 nm were prepared using ascorbic acid as a reducing agent and disk-like bicelles as a template. Only the presence of a soft template, like bicelles, ensured the appearance of spiked nanoparticles with resonance in the near infrared region. The irradiation of spiked gold nanoparticles by an 805 nm laser led to the time- and concentration-dependent increase of temperature. Both pHLIP^® and PEG coated gold spherical and multispiked nanoparticles might find application in radiation and thermal therapies of tumors.     

First proof of bismuth oxide nanoparticles as efficient radiosensitisers on highly radioresistant cancer cells

This study provides the first proof of the novel application of bismuth oxide as a radiosensitiser. It was shown that on the highly radioresistant 9L gliosarcoma cell line, bismuth oxide nanoparticles sensitise to both kilovoltage (kVp) or megavoltage (MV) X-rays radiation. 9L cells were exposed to a concentration of 50 μg.mL⁻¹ of nanoparticle before irradiation at 125 kVp and 10 MV. Sensitisation enhancement ratios of 1.48 and 1.25 for 125 kVp and 10 MV were obtained in vitro, respectively. The radiation enhancement of the nanoparticles is postulated to be a combination of the high Z nature of the bismuth (Z = 83), and the surface chemistry. Monte Carlo simulations were performed to elucidate the physical interactions between the incident radiation and the nanoparticle. The results of this work show that Bi₂O₃ nanoparticles increase the radiosensitivity of 9L gliosarcoma tumour cells for both kVp and MV energies. Monte Carlo simulations demonstrate the advantage of a platelet morphology.     

Fungus mediated synthesis of gold nanoparticles and their conjugation with genomic DNA isolated from Escherichia coli and Staphylococcus aureus

Biological systems employing microorganisms have been used as an alternative to conventional chemical techniques for synthesizing gold nanoparticles. In the present study, gold nanoparticles have been synthesized from the supernatant broth (SB) and live cell filtrate (LCF) of the industrially important fungus Penicillium rugulosum. Additionally, potato dextrose broth (PDB) medium which is used for the growth of the fungus has also been able to synthesize gold nanoparticles. The size of the particles has been investigated by Bio-TEM before purification as well as after purification to find the difference in morphology pattern of the nanoparticles. Different characterization techniques like X-ray diffraction (XRD), infra-red (FTIR), X-ray photoelectron (XPS) and UV–vis spectroscopy have been used for analysis of the particles. SB of the fungus has yielded nanoparticles with better morphology and hence further optimization studies were conducted for controlling the size and shape of the above by altering pH and concentration of gold salt. A pH range of 4–6 has favored the synthesis process whereas increasing concentration of gold salt (beyond 2 mM) has resulted in the formation of bigger sized and aggregated nanoparticles. The optimized nanoparticles have been used to conjugate with isolated genomic DNA of bacteria Escherichia coli and Staphylococcus aureus. Visual observation of agarose gel electrophoresis images confirmed the binding of gold nanoparticles (4 μL and 6 μL) with isolated DNA (2 μL) fragments of both the organisms. The slight red shift of the surface plasmon (SP) band and minor aggregations noticed in Bio-TEM images for the DNA conjugated gold nanoparticles indicates that the genomic DNA could stabilize the particles against aggregation owing to negatively charged phosphate backbone.     

High activity and selectivity immobilized lipase on Fe3O4 nanoparticles for banana flavour synthesis

Lipase (E.C.3.1.1.3) from Thermomyces lanuginosus (TL) was directly bonded, through multiple physical interactions, on citric acid functionalized monodispersed Fe₃O₄ nanoparticles (NPs) in presence of a small amount of hydrophobic functionalities. A very promising scalable synthetic approach ensuring high control and reproducibility of the results, and an easy and green immobilization procedure was chosen for NPs synthesis and lipase anchoring. The size and structure of magnetic nanoparticles were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The samples at different degree of functionalization were analysed through thermogravimetric measurements. Lipase immobilization was further confirmed by enzymatic assay and Fourier transform infrared (FT-IR) spectra. Immobilized lipase showed a very high activity recovery up to 144% at pH = 7 and 323% at pH = 7.5 (activity of the immobilized enzyme compared to that of its free form). The enzyme, anchored to the Fe₃O₄ nanoparticles, to be easy recovered and reused, resulted more stable than the native counterpart and useful to produce banana flavour. The immobilized lipase results less sensitive to the temperature and pH, with the optimum temperature higher of 5 °C and optimum pH up shifted to 7.5 (free lipase optimum pH = 7.0). After 120 days, free and immobilized lipases retained 64% and 51% of their initial activity, respectively. Ester yield at 40 °C for immobilized lipase reached 88% and 100% selectivity.     

Silver glyconanoparticles functionalized with sugars of sweet sorghum syrup as an antimicrobial agent

Bio-directed synthesis of metal nanoparticles is gaining importance due to their biocompatibility, low toxicity and eco-friendly nature. We used sweet sorghum syrup for a facile and cost-effective green synthesis of silver glyconanoparticles. Silver nanoparticles were formed due to reduction of silver ions when silver nitrate solution was treated with sorghum syrup solutions of different pH values. The nanoparticles were characterized by UV–vis, TEM (transmission electron microscopy), DLS (dynamic light scattering), EDAX (energy dispersive X-ray spectroscopy), FT-IR (fourier transform infrared spectroscopy) and XRD (X-ray diffraction spectroscopy). The silver glyconanoparticles exhibited a characteristic surface plasmon resonance around 385 nm. At pH 8.5, the nanoparticles were mono-dispersed and spherical in shape with average particle size of 11.2 nm. The XRD and SAED studies suggested that the nanoparticles were crystalline in nature. EDAX analysis showed the presence of elemental silver signal in the synthesized glyconanoparticles. FT-IR analysis revealed that glucose, fructose and sucrose present in sorghum syrup acted as capping ligands. Silver glyconanoparticles prepared at pH 8.5 had a zeta potential of ?28.9 mV and were anionic charged. They exhibited strong antimicrobial activity against Gram-positive, Gram-negative and different Candida species at MIC values ranging between 2 and 32 μg ml^?1. This is first report on sweet sorghum syrup sugars-derived silver glyconanoparticles with antimicrobial property.     

Synthesis and characterization of a pH-sensitive conjugate of isoniazid with Fe3O4@SiO2 magnetic nanoparticles

The Letter describes the preparation and characterization of a conjugate of isoniazid (INH) with magnetic nanoparticles Fe₃O₄@SiO₂ 115 ± 60 nm in size. The INH molecules were attached to the surface of nanoparticles by a covalent pH-sensitive amidine bond. The conjugate was characterized by X-ray diffraction, SEM, dynamic light scattering, IR spectroscopy and microanalysis. The conjugate released isoniazid under in vitro conditions (pH = 4; 37 °C; t_1/2 ≈ 115 s). In addition, the cytotoxicity of the Fe₃O₄@SiO₂–INH conjugate was evaluated in SK-BR-3 cells using the xCELLigence system.     

Tracing transport of chitosan nanoparticles and molecules in Caco-2 cells by fluorescent labeling

The aim of this study was to explore the transport properties of chitosan nanoparticles and molecules in Caco-2 cells. Fluorescein isothiocyanate-labeled chitosan (f-CS) was synthesized and prepared into nanoparticles (f-CNP). The f-CNP exhibit a mean size of 58.04 nm and a mean charge with +41.63 mV. Cytotoxicities of the f-CNP and the f-CS against Caco-2 cells were disregarded in the transport study. The transport was observed under fluorescence microscope. The f-CNP could be transported into Caco-2 cells across the cell membrane, and showed concentration-dependent and saturable intracellular fluorescence signal at 37 °C. Meanwhile, the energy-dependence of the trans-membrane transport of f-CNP was not observed at 4 °C. The f-CS was mainly accumulated in the cell peripheral and showed a concentration-dependent intercellular fluorescence signal. Thus, formulation of chitosan into nanoparticles significantly improved its trans-membrane transport in Caco-2 cells.     

Dietary supplementation of green synthesized manganese-oxide nanoparticles and its effect on growth performance,muscle composition and digestive enzyme activities of the giant freshwater prawn Macrobrachium rosenbergii

The green synthesized Mn₃O₄ nanoparticles (manganese-oxide nanoparticles) using Ananas comosus (L.) peel extract was characterized by various techniques. HR-SEM photograph showed that manganese-oxide nanoparticles (Mn-oxide NPs) were spherical in shape, with an average size of 40–50 nm. The Zeta potential revealed the surface charge of Mn-oxide NPs to be negative. Further, the Mn-oxide NPs were dietary supplemented for freshwater prawn Macrobrachium rosenbergii. The experimental basal diets were supplemented with Mn-oxide NPs at the rates of 0 (control), 3.0, 6.0, 9.0, 12, 15 and 18 mg/kg dry feed weight. The as-supplemented Mn-oxide NPs were fed in M. rosenbergii for a period of 90 days. The experimental study demonstrated that prawns fed with diet supplemented with 3–18 mg Mn-oxide NPs/kg shows enhanced (P < 0.05) growth performance, including final weight and weight gain (WG). Significant differences (P < 0.05) in feed conversion ratio (FCR) were observed in prawn fed with different diets. Additionally, prawns fed with 3.0–18 mg/kg Mn-oxide NPs supplemented diets achieved significant (P < 0.05) improvement in growth performance, digestive enzyme activities and muscle biochemical compositions, while, the prawns fed with 16 mg/kg of Mn-oxide NPs showed enhanced performance. Prawns fed on diet supplemented with 16 mg/kg Mn-oxide NPs showed significantly (P < 0.05) higher total protein level. The antioxidants enzymatic activity (SOD and CAT) metabolic enzymes status in muscle and hepatopancreas showed no significant (P > 0.05) alterations in prawns fed with 3.0–18 mg/kg of Mn-oxide NPs supplemented diets. Consequently, the present work proposed that 16 mg/kg of Mn-oxide NPs could be supplemented for flexible enhanced survival, growth and production of M. rosenbergii. Therefore, the data of the present study recommend the addition of 16 mg/kg of Mn-oxide NPs diet to developed prawn growth and antioxidant defense system.     

Preparation and pharmacodynamics of low-molecular-weight chitosan nanoparticles containing insulin

Low-molecular-weight chitosan (LMWC) was obtained by enzymatic degradation and ultrafiltration separation. LMWC nanoparticles with LMWC having 20 kDa weight average molecular weight (M_w) were then prepared by solvent evaporation method. The resultant nanoparticles were spherical with a narrow particle size distribution. LMWC nanoparticles loaded with insulin as a model drug were prepared. The average entrapment efficiency of insulin could reach up to 95.54%. The in vitro drug release profiles from the nanoparticles showed an initial burst of release in the first 2 h, followed by zero order release kinetics. In vivo pharmacodynamics of chitosan nanoparticles containing insulin showed that the nanoparticles showed some hypoglycemic activity. Compared with an insulin solution, a relative bioavailability of 0.737 was observed for four times the dosage of insulin in the chitosan nanoparticles after pulmonary administration.     

Immobilization of lysine oxidase on a gold–platinum nanoparticles modified Au electrode for detection of lysine

A commercial lysine oxidase (LyOx) from Trichoderma viride was immobilized covalently onto gold nanoparticles (AuNPs) and platinum nanoparticles (PtNPs) electrodeposited onto Au electrode using 3-aminopropyltriethoxy silane (3-APTES) and glutaraldehyde cross linking chemistry. A lysine biosensor was fabricated using LyOx/3-APTES/AuNPs-PtNPs/Au electrode as a working electrode, Ag/AgCl (3 M KCl) as standard electrode and Pt wire as auxiliary electrode connected through a potentiostat. The enzyme electrode was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The cumulative effect of AuNPs and PtNPs showed excellent electrocatalytic activity at low applied potential for detection of H₂O₂, a product of LyOx reaction. The sensor showed its optimum response within 4 s, when polarized at 0.2 V vs. Ag/AgCl in 0.1 M phosphate buffer, pH 7.5 at 30 °C. The linear range and detection limit of the sensor were 1.0–600 μM and 1.0 μM (S/N = 3), respectively. Biosensor measured lysine level in sera, milk and amino acid tablet, which correlated well with those by standard HPLC method. The enzyme electrode lost 50% of its initial activity after 200 uses over a period of 4 months.     

Fungal surface protein mediated one-pot synthesis of stable and hemocompatible gold nanoparticles

Despite their large secretome and wide applications in bioprocesses, fungi remain underexplored in metal nanoparticles (MNP) biosynthesis. Previous studies have shown that cell surface proteins of Rhizopus oryzae play a crucial role in biomineralization of Au(III) to produce gold nanoparticles (AuNPs). Therefore, it is hypothesized that purified cell surface protein may produce in vitro AuNPs with narrow size distribution for biomedical and biocatalytic applications. However, different protein extraction methods might affect protein stability and the AuNP biosynthesis process. Herein, we have explored the extraction of cell surface proteins from R. oryzae using common detergents and reducing agent (sodium dodecyl sulfate (SDS) Triton X-100, and 1,4-dithiothreitol (DTT)) and their effect on the size and shape of the biosynthetic AuNPs. The surface proteins extracted with reducing agent (DTT) and non-ionic detergent (Triton X-100) produce spherical AuNPs with a mean particle size of 16 ± 7 nm, and 19 ± 4 nm, respectively, while the AuNPs produced by the surface protein extracted by ionic detergent (SDS) are flower-like AuNPs with broader size distribution of 43 ± 19 nm. This synthetic approach does not require use of any harsh chemicals, multistep preparation and separation process, favouring environmental sustainability. The biosynthetic AuNPs thus formed, are stable in different physiological buffers and hemocompatible, making them suitable for biomedical applications.     

Aqueous extract of gum olibanum (Boswellia serrata): A reductant and stabilizer for the biosynthesis of antibacterial silver nanoparticles

A simple and ecofriendly biosynthetic process has been developed for silver nanoparticles using the aqueous extract of gum olibanum (Boswellia serrata), a renewable natural plant biopolymer. The water soluble compounds in the gum serve as dual functional reducing and stabilizing agents. The effect of concentration of gum and silver nitrate; and reaction time on nanoparticle synthesis was studied. The UV–visible spectroscopy, transmission electron microscopy and X-ray diffraction techniques were used to characterize the synthesized nanoparticles. By tuning the reaction conditions, size controlled spherical nanoparticles of around 7.5 ± 3.8 nm was achieved. Using Fourier transform infrared spectroscopy and Raman spectroscopy, a probable mechanism involved in reduction and stabilization of nanoparticles has been explained. The produced silver nanoparticles exhibited substantial antibacterial activity on both the Gram classes of bacteria. By virtue of being biogenic and encapsulated with proteins, these surface functionalized nanoparticles can be easily integrated for various biological applications.